Electrical discharges in or in contact with liquid can produce H2O2effectively.However,wound treatment requires not only high energy yield,but also low temperature,stability,safety and reproducibility in H2O2generatio...Electrical discharges in or in contact with liquid can produce H2O2effectively.However,wound treatment requires not only high energy yield,but also low temperature,stability,safety and reproducibility in H2O2generation.Thus a method of producing H2O2in saline solution reacting with He/H2O plasma jet is described in this paper.Two working modes(bullet and arc modes)are stable while keeping at low temperature in the H2O2production.The production is much faster under the arc mode,but has rather high production rate and energy efficiency under the bullet mode.Plus,the energy efficiency increases with treatment time and higher moist helium flow rate under both modes,but especially the bullet mode.Moreover,55 min after the plasma treatment,there is only 6%degradation of H2O2concentration in the saline solution,and this indicates the potential of He/H2O plasma jet in plasma pharmacy.展开更多
A direct current(DC) source excited plasma jet consisting of a hollow needle anode and a plate cathode has been developed to form a diffuse discharge plume in ambient air with flowing argon as the working gas.Using ...A direct current(DC) source excited plasma jet consisting of a hollow needle anode and a plate cathode has been developed to form a diffuse discharge plume in ambient air with flowing argon as the working gas.Using optical and electrical methods,the discharge characteristics are investigated for the diffuse plasma plume.Results indicate that the discharge has a pulse characteristic,under the excitation of a DC voltage.The discharge pulse corresponds to the propagation process of a plasma bullet travelling from the anode to the cathode.It is found that,with an increment of the gas flow rate,both the discharge plume length and the current peak value of the pulsed discharge decrease in the laminar flow mode,reach their minima at about1.5 L/min,and then slightly increase in the turbulent mode.However,the frequency of the pulsed discharge increases in the laminar mode with increasing the argon flow rate until the argon flow rate equals to about 1.5 L/min,and then slightly decreases in the turbulent mode.展开更多
基金Project supported by National Natural Science Foundation of China (51207027), Scien- tific Research Foundation for the Returned Overseas Chinese Scholars, State Education Ministry of China.
文摘Electrical discharges in or in contact with liquid can produce H2O2effectively.However,wound treatment requires not only high energy yield,but also low temperature,stability,safety and reproducibility in H2O2generation.Thus a method of producing H2O2in saline solution reacting with He/H2O plasma jet is described in this paper.Two working modes(bullet and arc modes)are stable while keeping at low temperature in the H2O2production.The production is much faster under the arc mode,but has rather high production rate and energy efficiency under the bullet mode.Plus,the energy efficiency increases with treatment time and higher moist helium flow rate under both modes,but especially the bullet mode.Moreover,55 min after the plasma treatment,there is only 6%degradation of H2O2concentration in the saline solution,and this indicates the potential of He/H2O plasma jet in plasma pharmacy.
基金supported by National Natural Science Foundation of China(Nos.10805013,11375051)Funds for Distinguished Young Scientists of Hebei Province,China(No.A2012201045)+1 种基金Department of Education for Outstanding Youth Project of China(No.Y2011120)Youth Project of Hebei University of China(No.2011Q14)
文摘A direct current(DC) source excited plasma jet consisting of a hollow needle anode and a plate cathode has been developed to form a diffuse discharge plume in ambient air with flowing argon as the working gas.Using optical and electrical methods,the discharge characteristics are investigated for the diffuse plasma plume.Results indicate that the discharge has a pulse characteristic,under the excitation of a DC voltage.The discharge pulse corresponds to the propagation process of a plasma bullet travelling from the anode to the cathode.It is found that,with an increment of the gas flow rate,both the discharge plume length and the current peak value of the pulsed discharge decrease in the laminar flow mode,reach their minima at about1.5 L/min,and then slightly increase in the turbulent mode.However,the frequency of the pulsed discharge increases in the laminar mode with increasing the argon flow rate until the argon flow rate equals to about 1.5 L/min,and then slightly decreases in the turbulent mode.