Study of Burning Behaviors and Fire Risk of Flame Retardant Plywood by Cone Calorimeter and TG Test

A flame retardant composition was prepared by using phosphoguanidine,guanidine sulfamate,disodium octaborate tetrahydrate and dodecyl dimethyl benzyl ammonium chloride.Veneers were immersed in such flame retardant mixture to prepare plywood.The combustion characteristics and thermal stability of plywood were assessed using a cone calorimeter and TG.Results showed that:(1)High concentration and loading of flame retardant were beneficial for the fire resistance of the plywood.(2)The limiting oxygen index(LOI)and residual mass of plywood processed using the flame retardant was increased by 87.52%and 58.66%compared to those of the untreated plywood,while the average heat release rate(av-HRR),total heat release(THR),effective heat of combustion(EHC),total smoke release(TSR),CO yield(COY),CO_(2) yield(CO_(2)Y)and oxygen consumption were decreased by 44.3%,82.9%,47.0%,86.0%,89.9%,50.1%and 83.1%,respectively.(3)Treated plywood which had a low fire growth index(FGI)displayed a later combustion heat release rate peak and slower flame spread than observed for the untreated material.Combustion of treated plywood displayed a higher fire performance index(FPI),indicating a longer time to ignition.This suggests that burning structures from this material would be subject to a longer time for escape from the structure and would present lower fire risk than similar structures containing treated plywood.(4)TG results demonstrated that the presence of the flame retardant can decrease the pyrolysis temperature for hemicellulose and cellulose,change the decomposition and reaction progress for plywood degradation and promote dehydration carbonization and accelerated charformation.Moreover,the formed char was more stable than that combustion of untreated plywood.(5)The flame retardant contains nitrogen(N),phosphorus(P),boron(B),chlorine(Cl)and guanidine(Gu)compounds.The adhesive also contains N and P compounds.These substances display flame resistance and supplement each other to generate flame retardance than any one used alone.By changing the thermolysis and thermal decomposition processes,the heat release and smoke release from plywood,undergoing combustion was reduced.This controlled generation of combustible substances and promoted dehydration and carbonization to form char.As a result,the flame resistance of plywood was improved significantly.The probability of smoke asphyxia or poisoning death of those trapped in structures containing treated plywood during fire accidents can be decreased dramatically.

Effect of CaO composition on oxidation and burning behaviors of AM50 Mg alloy

Oxidation and burning behaviors were studied for CaO added AM50 Mg composites which were manufactured by conventional melting and casting processes without SF6 protective gas. CaO added AM50 Mg composites show the stable oxidation resistance, while AMS0 Mg alloys show the poor oxidation resistance. The effects of CaO addition on the burning resistance under ambient, nitrogen and dry air atmospheres were examined for CaO added AM50 Mg composites. With increasing CaO addition, the burning temperature increases under ambient, nitrogen and dry air atmospheres. The burning temperatures of small test specimen under all conditions greatly increase even by 0.3% CaO （mass fraction） addition into AM50 Mg alloys.

Synthesis and Property of Flame Retardant Epoxy Resins Modified with 2-（Diphenylphosphinyl）-l,4-benzenediol

2-（Diphenylphosphinyl）-1,4-benzenediol（DPO-HQ） was synthesized by the reaction of diphenylphos- phine oxide（DPO） with 1,4-benzoquinone（BQ）, and characterized by Fourier transform infrared（FTIR）, and nuclear magnetic resonance（1H NMR, 13C NMR, 31p NMR） spectrometries. The thermal stability of DPO-HQ was investi- gated by thermogravimetric analysis（TGA）. Flame retardant epoxy resin was synthesized based on DPO-HQ. The thermal properties and burning performance of cured epoxy resins were measured by differential scanning calorime- try（DSC）, thermogravimetric analysis（TGA）, limited oxygen index（LOI） and vertical burning test（UL-94V）. The morphologies of cured epoxy resins after combustion were investigated by scanning electron microscopy（SEM） and electron probe microanalysis（EPMA）. Moreover, the thermal stability（both in air and in N2） of DPO-HQ and its cured epoxy resin was compared with that of 10-（2,5-dihydroxyphenyl）-9,10-dihydro-9-oxa-10-phosphaphenanthrene-10- oxide（DOPO-HQ） and its cured epoxy resin. The thermal stability of DPO-HQ is comparable with that of DOPO-HQ, while the thermal stability of cured epoxy resin based on DPO-HQ is better than that based on DOPO-HQ.