Rock burst is a severe disaster in mining and underground engineering,and it is important to predict the rock burst risk for minimizing the loss during the constructing process.The rock burst proneness was connected w...Rock burst is a severe disaster in mining and underground engineering,and it is important to predict the rock burst risk for minimizing the loss during the constructing process.The rock burst proneness was connected with the acoustic emission(AE) parameter in this work,which contributes to predicting the rock burst risk using AE technique.Primarily,a rock burst proneness index is proposed,and it just depends on the heterogeneous degree of rock material.Then,the quantificational formula between the value of rock burst proneness index and the accumulative AE counts in rock sample under uniaxial compression with axial strain increases is developed.Finally,three kinds of rock samples,i.e.,granite,limestone and sandstone are tested about variation of the accumulative AE counts under uniaxial compression,and the test data are fitted well with the theoretic formula.展开更多
A new method based on rough set theory and genetic algorithm was proposedto predict the rock burst proneness. Nine influencing factors were first selected, and then,the decision table was set up. Attributes were reduc...A new method based on rough set theory and genetic algorithm was proposedto predict the rock burst proneness. Nine influencing factors were first selected, and then,the decision table was set up. Attributes were reduced by genetic algorithm. Rough setwas used to extract the simplified decision rules of rock burst proneness. Taking the practical engineering for example, the rock burst proneness was evaluated and predicted bydecision rules. Comparing the prediction results with the actual results, it shows that theproposed method is feasible and effective.展开更多
To investigate the influence of confining pressure and pore water pressure on strength characteristics,energy storage state and energy release intensity at peak failure of deep sandstone,a series of triaxial compressi...To investigate the influence of confining pressure and pore water pressure on strength characteristics,energy storage state and energy release intensity at peak failure of deep sandstone,a series of triaxial compression tests under hydraulic coupling conditions are carried out.By analyzing the process of rock deformation and failure,the stress thresholds of the rock are obtained.The change trend of total energy density,elastic energy density and dissipated energy density of deep sandstone in the pre-peak stage is obtained by the graphical integration method.By comparing the dynamic energy storage level of rocks under different confining pressures,the influence of pore water pressure on the energy dissipation at stress thresholds of crack closure stress,crack initiation stress,crack damage stress and peak stress is analyzed.Based on the ratio of pre-peak total energy density to post-peak total energy density,the interaction mechanism of confining pressure and pore water pressure for the rock burst proneness of deep sandstone is studied.The experimental results show that the peak stress of sandstone increases with the increase of confining pressure,while the existence of pore water pressure can weaken the peak stress of sandstone.In the stress stage from crack closure stress to peak stress,the dynamic energy storage level of rock presents a trend of the inverse“check mark”.Meanwhile,the larger the confining pressure,the higher the energy storage level of rock.However,the pore water pressure increases the degree of energy dissipation of rock and reduces the energy storage capacity of rock,and the degree of dissipation is linear with pore water pressure.The increase of confining pressure aggravates the instability and failure of deep sandstone,while pore water pressure has the opposite effect.The research results will provide necessary data support for the stability analysis of rock mass excavation in sandstone stratum under high stress and high pore water pressure.展开更多
基金Project(2010CB226804)supported by the National Basic Research Program(973 Program)of ChinaProject(11202108)supported by the National Natural Science Foundation of ChinaProject(BK20130189)supported by the Natural Science Foundation of Jiangsu Province,China
文摘Rock burst is a severe disaster in mining and underground engineering,and it is important to predict the rock burst risk for minimizing the loss during the constructing process.The rock burst proneness was connected with the acoustic emission(AE) parameter in this work,which contributes to predicting the rock burst risk using AE technique.Primarily,a rock burst proneness index is proposed,and it just depends on the heterogeneous degree of rock material.Then,the quantificational formula between the value of rock burst proneness index and the accumulative AE counts in rock sample under uniaxial compression with axial strain increases is developed.Finally,three kinds of rock samples,i.e.,granite,limestone and sandstone are tested about variation of the accumulative AE counts under uniaxial compression,and the test data are fitted well with the theoretic formula.
基金Supported by the Youth Science Foundation of North China University of Water Conservancy and Electric Power(HSQJ2009016)
文摘A new method based on rough set theory and genetic algorithm was proposedto predict the rock burst proneness. Nine influencing factors were first selected, and then,the decision table was set up. Attributes were reduced by genetic algorithm. Rough setwas used to extract the simplified decision rules of rock burst proneness. Taking the practical engineering for example, the rock burst proneness was evaluated and predicted bydecision rules. Comparing the prediction results with the actual results, it shows that theproposed method is feasible and effective.
基金Project(2016YFC0600801)supported by the National Key Research Development Program of ChinaProject(51774021)supported by the National Natural Science Foundation of ChinaProject(2019SDZY05)supported by the Major Scientific and Technological Innovation Project of Shandong Province,China。
文摘To investigate the influence of confining pressure and pore water pressure on strength characteristics,energy storage state and energy release intensity at peak failure of deep sandstone,a series of triaxial compression tests under hydraulic coupling conditions are carried out.By analyzing the process of rock deformation and failure,the stress thresholds of the rock are obtained.The change trend of total energy density,elastic energy density and dissipated energy density of deep sandstone in the pre-peak stage is obtained by the graphical integration method.By comparing the dynamic energy storage level of rocks under different confining pressures,the influence of pore water pressure on the energy dissipation at stress thresholds of crack closure stress,crack initiation stress,crack damage stress and peak stress is analyzed.Based on the ratio of pre-peak total energy density to post-peak total energy density,the interaction mechanism of confining pressure and pore water pressure for the rock burst proneness of deep sandstone is studied.The experimental results show that the peak stress of sandstone increases with the increase of confining pressure,while the existence of pore water pressure can weaken the peak stress of sandstone.In the stress stage from crack closure stress to peak stress,the dynamic energy storage level of rock presents a trend of the inverse“check mark”.Meanwhile,the larger the confining pressure,the higher the energy storage level of rock.However,the pore water pressure increases the degree of energy dissipation of rock and reduces the energy storage capacity of rock,and the degree of dissipation is linear with pore water pressure.The increase of confining pressure aggravates the instability and failure of deep sandstone,while pore water pressure has the opposite effect.The research results will provide necessary data support for the stability analysis of rock mass excavation in sandstone stratum under high stress and high pore water pressure.