Modeling of cable vibration effects of cable-stayed bridges

The analysis of dynamic responses of cable-stayed bridges subjected to wind and earthquake loads generally considers only the motions of the bridge deck and pylons.The influence of the stay cable vibration on the responses of the bridge is either ignored or considered by approximate procedures.The transverse vibration of the stay cables,which can be significant in some cases,are usually neglected in previous research.In the present study,a new three-node cable element has been developed to model the transverse motions of the cables.The interactions between the cable behavior and the other parts of the bridge superstructure are considered by the concept of dynamic stiffness.The nonlinear effect of the cable caused by its self-weight is included in the formulation.Numerical examples are presented to demonstrate the accuracy and efficiency of the proposed model. The impact of cable vibration behavior on the dynamic characteristics of cable-stayed bridges is discussed.

Application of coupled multi-body dynamics-discrete element method for optimization of particle damper for cable vibration attenuation

With the application of the particle damping technology to cable vibration attenuation,the rootless cable damper overcomes the limit in installation height of existing dampers.Damping is achieved through energy dissipation by collisions and friction.In this paper,a coupled multi-body dynamics-discrete element method is proposed to simulate the damping of the damper-cable system under a harmonic excitation.The analyses are done by combining the discrete element method in EDEM and multi-body dynamics in ADAMS.The simulation results demonstrate the damping efficiency of rootless particle damper under different excitations and reveal the influence of the design parameters on its performance,including the filling ratio,particle size,coefficient of restitution,and coefficient of friction.

Influence of Girder Vibration on Cable Damper's Performance of A Cable-stayed Bridge

The model combined by cable,girder and damper is founded to study the influence of girder vibration on cable damper 's performance of a cable-stayed bridge. The complex mode method and nondimensionalization are used to analyze the relationship between the girder's parameters and the performance of cable-related damper. The results indicate that the performance of cable-related damper will decrease greatly when the girder frequencies are near the frequencies of cable. The smaller absolute displacement of damper's piston caused by the very small vibration phase shift of girder and cable is the physical cause of the negative impact mentioned above.

Dynamic responses of cable-stayed bridges to vehicular loading including the effects of the local vibration of cables

Stay cables, the primary load carrying components of cable-stayed bridges (CSBs), are characterised by high flexi-bility which increases with the span of the bridge. This makes stay cables vulnerable to local vibrations which may have significant effects on the dynamic responses of long-span CSBs. Hence, it is essential to account for these effects in the assessment of the dynamics CSBs. In this paper, the dynamic responses of CSBs under vehicular loads are studied using the finite element method (FEM), while the local vibration of stay cables is analyzed using the substructure method. A case study of a cable-stayed steel bridge with a center span of 448 m demonstrates that stay cables undergo large displacements in the primary mode of the whole bridge although, in general, a cable’s local vibrations are not obvious. The road surface roughness has significant effects on the interaction force between the deck and vehicle but little effect on the global response of the bridge. Load impact factors of the main girder and tower are small, and the impact factors of the tension of cables are larger than those of the displacements of girders and towers.

Some important aspects of wind-resistant studies on long-span bridges

In recent years many long-span bridges have been or are being constructed in the world, especially in China. Wind loads and responses are the key factors for their structural design. This paper introduces some important achievements of wind-resistant studies of the author's research team on long-span bridges. First, new concepts and identification methods of aerodynamic derivatives and aerodynamic admittances were proposed. Then mechanical and aerodynamic control strategies and methods of wind-induced vibrations of long-span bridges were the great concerned problems, and valuable achievements were presented. Especially, great efforts which have been theoretically and experimentally made on rain-wind induced vibration of cables of cable-stayed bridges were described. Finally, some new progresses in computation wind engineering were introduced, and a new method for simulating an equilibrium boundary layer was put forward as well.