We put forward a new and ingenious method for the preparation of a new adsorbent by soaking, carbonizing and activating the mixture of hygroscopic salt and biomass material. The new adsorbent has high porosity, unifor...We put forward a new and ingenious method for the preparation of a new adsorbent by soaking, carbonizing and activating the mixture of hygroscopic salt and biomass material. The new adsorbent has high porosity, uniform distribution and high content of Ca Cl2, and exhibits high adsorption performance. The ammonia uptake and specific cooling power（SCP） at 5 min adsorption time can reach as high as 0.19 g·g^-1 and 793.9 W·kg^-1, respectively. The concept of utilizing the biomass materials and hygroscopic salts as raw materials for the preparation of adsorbents is of practical interest with respect to the potential quantity of biomass materials around the world, indicating that there would be a new market for biomass materials.Key words： biomass material; adsorption system; ammonia; calcium chloride; activated carbon展开更多
This study presents the use of chicken eggshells waste utilizing palm kernel shell based activated carbon（PKSAC） through the modification of their surface to enhance the adsorption capacity of H2S. Response surface ...This study presents the use of chicken eggshells waste utilizing palm kernel shell based activated carbon（PKSAC） through the modification of their surface to enhance the adsorption capacity of H2S. Response surface methodology technique was used to optimize the process conditions and they were found to be： 500 mg/L for H2S initial concentration, 540 min for contact time and 1 g for adsorbent mass. The impacts of three arrangement factors（calcination temperature of impregnated activated carbon（IAC）, the calcium solution concentration and contact time of calcination） on the H2S removal efficiency and impregnated AC yield were investigated. Both responses IAC yield（IACY, %） and removal efficiency（RE, %） were maximized to optimize the IAC preparation conditions. The optimum preparation conditions for IACY and RE were found as follows： calcination temperature of IAC of 880 ℃, calcium solution concentration of 49.3% and calcination contact time of 57.6 min, which resulted in 35.8% of IACY and 98.2% RE. In addition, the equilibrium and kinetics of the process were investigated. The adsorbent was characterized using TGA, XRD, FTIR, SEM/EDX, and BET. The maximum monolayer adsorption capacity was found to be 543.47 mg/g. The results recommended that the composite of PKSAC and Ca O could be a useful material for H2S containing wastewater treatment.展开更多
基金Funded by the National Natural Science Foundation of China(No.51106161)the National Hi-Tech Research and Development Program of China(No.2012AA053003)the Guangdong Province and Chinese Academy of Sciences Comprehensive Strategic Cooperation Projects(2012B091100263)
文摘We put forward a new and ingenious method for the preparation of a new adsorbent by soaking, carbonizing and activating the mixture of hygroscopic salt and biomass material. The new adsorbent has high porosity, uniform distribution and high content of Ca Cl2, and exhibits high adsorption performance. The ammonia uptake and specific cooling power（SCP） at 5 min adsorption time can reach as high as 0.19 g·g^-1 and 793.9 W·kg^-1, respectively. The concept of utilizing the biomass materials and hygroscopic salts as raw materials for the preparation of adsorbents is of practical interest with respect to the potential quantity of biomass materials around the world, indicating that there would be a new market for biomass materials.Key words： biomass material; adsorption system; ammonia; calcium chloride; activated carbon
基金Funded by the Faculty of Chemical&Natural Resources Engineering,Universiti Malaysia Pahang through a Local Research Grant Scheme
文摘This study presents the use of chicken eggshells waste utilizing palm kernel shell based activated carbon（PKSAC） through the modification of their surface to enhance the adsorption capacity of H2S. Response surface methodology technique was used to optimize the process conditions and they were found to be： 500 mg/L for H2S initial concentration, 540 min for contact time and 1 g for adsorbent mass. The impacts of three arrangement factors（calcination temperature of impregnated activated carbon（IAC）, the calcium solution concentration and contact time of calcination） on the H2S removal efficiency and impregnated AC yield were investigated. Both responses IAC yield（IACY, %） and removal efficiency（RE, %） were maximized to optimize the IAC preparation conditions. The optimum preparation conditions for IACY and RE were found as follows： calcination temperature of IAC of 880 ℃, calcium solution concentration of 49.3% and calcination contact time of 57.6 min, which resulted in 35.8% of IACY and 98.2% RE. In addition, the equilibrium and kinetics of the process were investigated. The adsorbent was characterized using TGA, XRD, FTIR, SEM/EDX, and BET. The maximum monolayer adsorption capacity was found to be 543.47 mg/g. The results recommended that the composite of PKSAC and Ca O could be a useful material for H2S containing wastewater treatment.
