The experimental results of the thermal conductivities of xonotlite-type calcium silicate insulation materials were presented at different temperatures and pressures. Two appropriative surroundings, i.e. an elevated t...The experimental results of the thermal conductivities of xonotlite-type calcium silicate insulation materials were presented at different temperatures and pressures. Two appropriative surroundings, i.e. an elevated temperature surrounding from ambient temperature to 1450 K and a vacuum surrounding from atmosphere pressure to 10-3 Pa, were designed for the transient hot-strip （THS） method. The thermal conductivities of xonotlite-type calcium silicate with four densities from ambient temperature to 1000 K and 0.045 Pa to atmospheric pressure were measured. The results show that the thermal conductivity of xonotlite-type calcium silicate decreases apparently with the fall of density, and decreases apparently with the drop of pressure, and reaches the least value at about 100 Pa. The thermal conductivity of xonotlite-type calcium silicate increases almost linearly with T0, and increases more abundantly with low density than with high density. The thermal conductivity measurement uncertainty is estimated to be approximately 3% at ambient temperature, and 6% at 800 K.展开更多
A method for producing size- and shape-con-trolled calcium alginate beads with immobilized proteins was developed. Unlike previous cal-cium alginate bead production methods, pro-tein-immobilized alginate beads with un...A method for producing size- and shape-con-trolled calcium alginate beads with immobilized proteins was developed. Unlike previous cal-cium alginate bead production methods, pro-tein-immobilized alginate beads with uniform shape and sizes less then 20 micrometers in diameter could successfully be produced by using sonic vibration. BSA and FITC-conjugated anti-BSA antibodies were used to confirm pro-tein immobilization in the alginate beads. Pro-tein diffusion from the beads could be reduced to less than 10% by cross-linking the proteins to the alginate with 1-ethyl-3-(3-dimethylamino-propyl)carbodiimide (EDC) and N-hydroxysul-fosuccinimide (NHSS). The calcium alginate beads could also be arranged freely on a slide glass by using a femtosecond laser.展开更多
【目的】为提高螺旋输送机的输送效率,降低输送机的功耗与磨损,探究在不同进料速率、螺旋轴转速与几何体摩擦系数下,超细碳酸钙在水平变径变距螺旋输送机内的颗粒流动状态、出口质量流量、输送机功耗与磨损分布。【方法】使用计算流体...【目的】为提高螺旋输送机的输送效率,降低输送机的功耗与磨损,探究在不同进料速率、螺旋轴转速与几何体摩擦系数下,超细碳酸钙在水平变径变距螺旋输送机内的颗粒流动状态、出口质量流量、输送机功耗与磨损分布。【方法】使用计算流体动力学(computational fluid dynamics,CFD)与离散单元法(discrete element method,DEM)双向耦合数值模拟的方法,对螺旋输送机在不同转速下的质量流率进行分析对比,验证数值模型的正确性。【结果】摩擦系数对颗粒的运动有较大影响,颗粒流的轴向速度峰值和质量流率峰值随着摩擦系数的增加先增大再减小;随着下料速度和摩擦系数的增大,输送机功率明显增大,且摩擦系数在高进料速度与低转速的情况下对功耗的影响相对于低进料速度和高转速更加明显;磨损较严重的区域集中在下料口处的螺旋轴与螺旋叶片的边缘处。【结论】简单增大或减小摩擦系数并不能提高颗粒的轴向速度和质量流量,而是存在一个局部最优参数组合;适当地提高转速能够减小颗粒密实度与颗粒停留时间,从而减小输送机的功耗与几何体磨损。展开更多
基金supported by the National Natural Science Foundation of China (No.50806021)
文摘The experimental results of the thermal conductivities of xonotlite-type calcium silicate insulation materials were presented at different temperatures and pressures. Two appropriative surroundings, i.e. an elevated temperature surrounding from ambient temperature to 1450 K and a vacuum surrounding from atmosphere pressure to 10-3 Pa, were designed for the transient hot-strip （THS） method. The thermal conductivities of xonotlite-type calcium silicate with four densities from ambient temperature to 1000 K and 0.045 Pa to atmospheric pressure were measured. The results show that the thermal conductivity of xonotlite-type calcium silicate decreases apparently with the fall of density, and decreases apparently with the drop of pressure, and reaches the least value at about 100 Pa. The thermal conductivity of xonotlite-type calcium silicate increases almost linearly with T0, and increases more abundantly with low density than with high density. The thermal conductivity measurement uncertainty is estimated to be approximately 3% at ambient temperature, and 6% at 800 K.
文摘A method for producing size- and shape-con-trolled calcium alginate beads with immobilized proteins was developed. Unlike previous cal-cium alginate bead production methods, pro-tein-immobilized alginate beads with uniform shape and sizes less then 20 micrometers in diameter could successfully be produced by using sonic vibration. BSA and FITC-conjugated anti-BSA antibodies were used to confirm pro-tein immobilization in the alginate beads. Pro-tein diffusion from the beads could be reduced to less than 10% by cross-linking the proteins to the alginate with 1-ethyl-3-(3-dimethylamino-propyl)carbodiimide (EDC) and N-hydroxysul-fosuccinimide (NHSS). The calcium alginate beads could also be arranged freely on a slide glass by using a femtosecond laser.
文摘【目的】为提高螺旋输送机的输送效率,降低输送机的功耗与磨损,探究在不同进料速率、螺旋轴转速与几何体摩擦系数下,超细碳酸钙在水平变径变距螺旋输送机内的颗粒流动状态、出口质量流量、输送机功耗与磨损分布。【方法】使用计算流体动力学(computational fluid dynamics,CFD)与离散单元法(discrete element method,DEM)双向耦合数值模拟的方法,对螺旋输送机在不同转速下的质量流率进行分析对比,验证数值模型的正确性。【结果】摩擦系数对颗粒的运动有较大影响,颗粒流的轴向速度峰值和质量流率峰值随着摩擦系数的增加先增大再减小;随着下料速度和摩擦系数的增大,输送机功率明显增大,且摩擦系数在高进料速度与低转速的情况下对功耗的影响相对于低进料速度和高转速更加明显;磨损较严重的区域集中在下料口处的螺旋轴与螺旋叶片的边缘处。【结论】简单增大或减小摩擦系数并不能提高颗粒的轴向速度和质量流量,而是存在一个局部最优参数组合;适当地提高转速能够减小颗粒密实度与颗粒停留时间,从而减小输送机的功耗与几何体磨损。
