Many fishes use undulatory fin to propel themselves in the underwater environment. These locomotor mechanisms have a popular interest to many researchers. In the present study, we perform a three-dimensional unsteady ...Many fishes use undulatory fin to propel themselves in the underwater environment. These locomotor mechanisms have a popular interest to many researchers. In the present study, we perform a three-dimensional unsteady computation of an undulatory mechanical fin that is driven by Shape Memory Alloy （SMA）. The objective of the computation is to investigate the fluid dynamics of force production associated with the undulatory mechanical fin. An unstructured, grid-based, unsteady Navier-Stokes solver with automatic adaptive remeshing is used to compute the unsteady flow around the fin through five complete cycles. The pressure distribution on fin surface is computed and integrated to provide fin forces which are decomposed into lift and thrust. The velocity field is also computed throughout the swimming cycle. Finally, a comparison is conducted to reveal the dynamics of force generation according to the kinematic parameters of the undulatory fin （amplitude, frequency and wavelength）.展开更多
Computational fluid dynamics（CFD） simulations are adopted to investigate rectangular microchannel flows with various periodic micro-structured wall by introducing velocity slip boundary condition at low Reynolds num...Computational fluid dynamics（CFD） simulations are adopted to investigate rectangular microchannel flows with various periodic micro-structured wall by introducing velocity slip boundary condition at low Reynolds number. The purpose of the current study is to numerically find out the effects of periodic micro-structured wall on the flow resistance in rectangular microchannel with the different spacings between microridges ranging from 15 to 60 pm. The simulative results indicate that pressure drop with different spacing between microridges increases linearly with flow velocity and decreases monotonically with slip velocity; Pressure drop reduction also increases with the spacing between microridges at the same condition of slip velocity and flow velocity. The results of numerical simulation are compared with theoretical predictions and experimental results in the literatures. It is found that there is qualitative agreement between them.展开更多
This paper introduces and establishes a quasi-three-dimensional physical model of the interaction between a laser and a slab target.In contrast to previous one-dimensional analytical models,this paper innovatively fit...This paper introduces and establishes a quasi-three-dimensional physical model of the interaction between a laser and a slab target.In contrast to previous one-dimensional analytical models,this paper innovatively fits the real laser conditions based on an isothermal,homogeneous expansion similarity solution of the ideal hydrodynamic equations.Using this simple model,the evolution law and analytical formulae for key parameters(e.g.,temperature,density and scale length)in the corona region under certain conditions are given.The analytical solutions agree well with the relevant results of computational hydrodynamics simulation.For constant laser irradiation,the analytical solutions provide a meaningful power-law scaling relationship.The model provides a set of mathematical and physical tools that give theoretical support for adjusting parameters in experiments.展开更多
A 5-MW wind turbine has been modeled and analyzed for fluid-structure interaction and aerodynamic performance.In this study, a full-scale model of a 5-MW wind turbine is first developed based on a computational fluid ...A 5-MW wind turbine has been modeled and analyzed for fluid-structure interaction and aerodynamic performance.In this study, a full-scale model of a 5-MW wind turbine is first developed based on a computational fluid dynamics(CFD) approach, in which the unsteady, noncompressible Reynolds Averaged Navier-Stokes(RANS) method is used. The main focus of the study is to analyze the tower shadow effect on the aerodynamic performance of the wind turbine under different inlet flow conditions. Subsequently, the finite element model is established by considering fluid/structure interactions to study the structural stress, displacement, strain distributions and flow field information of the structure under the uniform wind speed. Finally, the fluid-structure interaction model is established by considering turbulent wind and the tower shadow effect. The variation rules of the dynamic response of the one-way and two-way fluid-structure interaction(FSI) models under different wind speeds are analyzed, and the numerical calculation results are compared with those of the centralized mass model. The results show that the tower shadow effect and structural deformation are the main factors affecting the aerodynamic load fluctuation of the wind turbine, which in turn affects the aerodynamic performance and structural stability of the blades. The structural dynamic response of the coupled model shows significant similarity, while the structural displacement response of the former exhibits less fluctuation compared with the conventional centralized mass model. The one-way fluid-structure interaction(FSI)model shows a higher frequency of stress-strain and displacement oscillations on the blade compared with the two-way FSI model.展开更多
To achieve hydrodynamic design excellence in Autonomous Underwater Vehicles(AUVs)largely depends on the accurate prediction of lift and drag forces.The study presents Computational Fluid Dynamics(CFD)-based lift and d...To achieve hydrodynamic design excellence in Autonomous Underwater Vehicles(AUVs)largely depends on the accurate prediction of lift and drag forces.The study presents Computational Fluid Dynamics(CFD)-based lift and drag estimations of a novel torpedo-shaped flight-style AUV with bow-wings.The horizontal bow-wings are provided to accommodate the electromagnetic arrays used to perform the cable detection and tracking operations near the seabed.The hydrodynamic performance of the AUV due to addition of these horizontal bow-wings is required to be investigated,particularly at the initial design stage.Hence,CFD techniques are employed to compute the lift and drag forces observed by the flight-style AUV,maneuvering underwater at different angles of attack and varying speeds.The Reynolds-Averaged Navier-Stokes Equations(RANSE)closure is achieved by employing the modified k-ϵ model and Two-Scale Wall Function(2-SWF)approach is used for boundary layer treatment.Further,the study also highlights the unique mesh refinement and solution-adaptive meshing techniques to perform the CFD simulations in Solidworks Flow Simulation(SWFS)environment.The drag polar curve for flight-style AUV with and without bow-wings is generated using the computed lift and drag coefficients.The curve provided essential insights for achieving hydrodynamically efficient and optimized AUV design.From the drag polar curve,it is revealed that due to horizontal bow-wings,the flight-style AUV is capable to generate higher lift with less drag and thus,it gives better lift-to-drag ratio compared to the AUV without bow-wings.Moreover,simulated results of axial drag observed by the AUV have also been compared with free-running experimental results and are found in good agreement.展开更多
To find out and improve the flow characteristics inside the intake system of cylinder head,the application of computational fluid dynamics(CFD)in the evaluation and optimization of the reconstructed intake system base...To find out and improve the flow characteristics inside the intake system of cylinder head,the application of computational fluid dynamics(CFD)in the evaluation and optimization of the reconstructed intake system based on slicing reverse method was proposed.The flow characteristics were found out through CFD,and the velocity vector field,pressure field and turbulent kinetic energy field for different valve lifts were discussed,which were in good agreement with experimental data,and the quality of reconstruction was evaluated.In order to improve its flow characteristic,an optimization plan was proposed.The results show that the flow characteristics after optimization are obviously improved.The results can provide a reference for the design and optimization of the intake system of cylinder head.展开更多
River bank erosion models are an important prerequisite for understanding the development of river meanders and for estimating likely land-loss and potential danger to floodplain infrastructure. Although bank erosion ...River bank erosion models are an important prerequisite for understanding the development of river meanders and for estimating likely land-loss and potential danger to floodplain infrastructure. Although bank erosion models have been developed that consider large-scale mass failure, the contribution of fluvial erosion (the process of particle-by-particle erosion due to the shearing action of the river flow) to bank retreat has not received as much consideration. In principle, such fluvial bank erosion rates can be quantified using excess shear stress formulations, but in practice, it has proven difficult to estimate the parameters involved. In this study, a series of three-dimensional Computational Fluid Dynamics (CFD) simulations for a meander loop on the River Asker (200 m long) at Bridport in southern England were undertaken to elucidate the overall flow structures and in particular to provide estimates of the applied fluid shear stress exerted on the riverbanks. The CFD models, which simulated relatively low and relatively high flow conditions, were established using Fluent 6.2 software. The modelling outcomes show that the key qualitative features of the flow endure even as flow discharge varies. At bank full, the degrees of velocity and simulated shear stresses within the inner bank separation zones are shown to be higher than those observed under low flow conditions, and that these elevated shear stresses may be sufficient to result in the removal of accumulated sediments into the main downstream flow.展开更多
文摘Many fishes use undulatory fin to propel themselves in the underwater environment. These locomotor mechanisms have a popular interest to many researchers. In the present study, we perform a three-dimensional unsteady computation of an undulatory mechanical fin that is driven by Shape Memory Alloy （SMA）. The objective of the computation is to investigate the fluid dynamics of force production associated with the undulatory mechanical fin. An unstructured, grid-based, unsteady Navier-Stokes solver with automatic adaptive remeshing is used to compute the unsteady flow around the fin through five complete cycles. The pressure distribution on fin surface is computed and integrated to provide fin forces which are decomposed into lift and thrust. The velocity field is also computed throughout the swimming cycle. Finally, a comparison is conducted to reveal the dynamics of force generation according to the kinematic parameters of the undulatory fin （amplitude, frequency and wavelength）.
基金National Natural Science Foundation of China (No.50435030)
文摘Computational fluid dynamics（CFD） simulations are adopted to investigate rectangular microchannel flows with various periodic micro-structured wall by introducing velocity slip boundary condition at low Reynolds number. The purpose of the current study is to numerically find out the effects of periodic micro-structured wall on the flow resistance in rectangular microchannel with the different spacings between microridges ranging from 15 to 60 pm. The simulative results indicate that pressure drop with different spacing between microridges increases linearly with flow velocity and decreases monotonically with slip velocity; Pressure drop reduction also increases with the spacing between microridges at the same condition of slip velocity and flow velocity. The results of numerical simulation are compared with theoretical predictions and experimental results in the literatures. It is found that there is qualitative agreement between them.
基金Project supported by the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No.XDA25051000)the National Natural Science Foundation of China (Grant No.11574390)。
文摘This paper introduces and establishes a quasi-three-dimensional physical model of the interaction between a laser and a slab target.In contrast to previous one-dimensional analytical models,this paper innovatively fits the real laser conditions based on an isothermal,homogeneous expansion similarity solution of the ideal hydrodynamic equations.Using this simple model,the evolution law and analytical formulae for key parameters(e.g.,temperature,density and scale length)in the corona region under certain conditions are given.The analytical solutions agree well with the relevant results of computational hydrodynamics simulation.For constant laser irradiation,the analytical solutions provide a meaningful power-law scaling relationship.The model provides a set of mathematical and physical tools that give theoretical support for adjusting parameters in experiments.
基金supported by the National Natural Science Foundation of China(Grant No.52078010)Beijing Natural Science Foundation(Grant No.JQ19029).
文摘A 5-MW wind turbine has been modeled and analyzed for fluid-structure interaction and aerodynamic performance.In this study, a full-scale model of a 5-MW wind turbine is first developed based on a computational fluid dynamics(CFD) approach, in which the unsteady, noncompressible Reynolds Averaged Navier-Stokes(RANS) method is used. The main focus of the study is to analyze the tower shadow effect on the aerodynamic performance of the wind turbine under different inlet flow conditions. Subsequently, the finite element model is established by considering fluid/structure interactions to study the structural stress, displacement, strain distributions and flow field information of the structure under the uniform wind speed. Finally, the fluid-structure interaction model is established by considering turbulent wind and the tower shadow effect. The variation rules of the dynamic response of the one-way and two-way fluid-structure interaction(FSI) models under different wind speeds are analyzed, and the numerical calculation results are compared with those of the centralized mass model. The results show that the tower shadow effect and structural deformation are the main factors affecting the aerodynamic load fluctuation of the wind turbine, which in turn affects the aerodynamic performance and structural stability of the blades. The structural dynamic response of the coupled model shows significant similarity, while the structural displacement response of the former exhibits less fluctuation compared with the conventional centralized mass model. The one-way fluid-structure interaction(FSI)model shows a higher frequency of stress-strain and displacement oscillations on the blade compared with the two-way FSI model.
基金supported in part by the National Natural Science Foundation of China(Grant Nos.52131101 and 52071153)in part by Hubei Natural Science Foundation for Innovation Groups(Grant No.2021CFA026).
文摘To achieve hydrodynamic design excellence in Autonomous Underwater Vehicles(AUVs)largely depends on the accurate prediction of lift and drag forces.The study presents Computational Fluid Dynamics(CFD)-based lift and drag estimations of a novel torpedo-shaped flight-style AUV with bow-wings.The horizontal bow-wings are provided to accommodate the electromagnetic arrays used to perform the cable detection and tracking operations near the seabed.The hydrodynamic performance of the AUV due to addition of these horizontal bow-wings is required to be investigated,particularly at the initial design stage.Hence,CFD techniques are employed to compute the lift and drag forces observed by the flight-style AUV,maneuvering underwater at different angles of attack and varying speeds.The Reynolds-Averaged Navier-Stokes Equations(RANSE)closure is achieved by employing the modified k-ϵ model and Two-Scale Wall Function(2-SWF)approach is used for boundary layer treatment.Further,the study also highlights the unique mesh refinement and solution-adaptive meshing techniques to perform the CFD simulations in Solidworks Flow Simulation(SWFS)environment.The drag polar curve for flight-style AUV with and without bow-wings is generated using the computed lift and drag coefficients.The curve provided essential insights for achieving hydrodynamically efficient and optimized AUV design.From the drag polar curve,it is revealed that due to horizontal bow-wings,the flight-style AUV is capable to generate higher lift with less drag and thus,it gives better lift-to-drag ratio compared to the AUV without bow-wings.Moreover,simulated results of axial drag observed by the AUV have also been compared with free-running experimental results and are found in good agreement.
基金“Strategic Cooperation of Science and Technology between Nanchong City and Southwest Petroleum University 2018” Special Fund Project,China(Nos.18SXHZ0030,18SXHZ0054)
文摘To find out and improve the flow characteristics inside the intake system of cylinder head,the application of computational fluid dynamics(CFD)in the evaluation and optimization of the reconstructed intake system based on slicing reverse method was proposed.The flow characteristics were found out through CFD,and the velocity vector field,pressure field and turbulent kinetic energy field for different valve lifts were discussed,which were in good agreement with experimental data,and the quality of reconstruction was evaluated.In order to improve its flow characteristic,an optimization plan was proposed.The results show that the flow characteristics after optimization are obviously improved.The results can provide a reference for the design and optimization of the intake system of cylinder head.
文摘River bank erosion models are an important prerequisite for understanding the development of river meanders and for estimating likely land-loss and potential danger to floodplain infrastructure. Although bank erosion models have been developed that consider large-scale mass failure, the contribution of fluvial erosion (the process of particle-by-particle erosion due to the shearing action of the river flow) to bank retreat has not received as much consideration. In principle, such fluvial bank erosion rates can be quantified using excess shear stress formulations, but in practice, it has proven difficult to estimate the parameters involved. In this study, a series of three-dimensional Computational Fluid Dynamics (CFD) simulations for a meander loop on the River Asker (200 m long) at Bridport in southern England were undertaken to elucidate the overall flow structures and in particular to provide estimates of the applied fluid shear stress exerted on the riverbanks. The CFD models, which simulated relatively low and relatively high flow conditions, were established using Fluent 6.2 software. The modelling outcomes show that the key qualitative features of the flow endure even as flow discharge varies. At bank full, the degrees of velocity and simulated shear stresses within the inner bank separation zones are shown to be higher than those observed under low flow conditions, and that these elevated shear stresses may be sufficient to result in the removal of accumulated sediments into the main downstream flow.
