期刊文献+
共找到820,041篇文章
< 1 2 250 >
每页显示 20 50 100
气象观测场在汽车试验场中的应用研究
1
作者 陈海建 《时代汽车》 2024年第14期172-174,178,共4页
汽车试验场作为汽车开展道路测试的重要场所,用于验证汽车产品的品质以及可靠性。除了场地道路外,气象条件作为汽车道路测试的重要一环,在《GB/T12534-1990汽车道路试验方法通则》中也有明确要求,如:试验时应是无雨无雾天气,相对湿度小... 汽车试验场作为汽车开展道路测试的重要场所,用于验证汽车产品的品质以及可靠性。除了场地道路外,气象条件作为汽车道路测试的重要一环,在《GB/T12534-1990汽车道路试验方法通则》中也有明确要求,如:试验时应是无雨无雾天气,相对湿度小于95%,气温0-40℃,风速不大于3m/s。同时气象条件也作为试验场道路管控的重要依据,实时风速、雨量、能见度等信息为场地管理者发布限速、限行、封场等通知提供必要参考依据,直接影响道路测试安全管控的及时性。因此,文章从气象观测场的建设、气象服务、异常天气道路管控等方面开展气象观测场在汽车试验场中的应用研究。 展开更多
关键词 products. In addition to the SITE roads METEOROLOGICAL conditions are an important part of AUTOMOTIVE ROAD testing and there are also clear requirements in the GB/T12534-1990 General Rules for AUTOMOTIVE ROAD Test methods. For example the test should be conducted in rain and fog free weather with a relative humidity of less than 95% a temperature of 0-40 and a wind SPEED of no more than 3m/s. At the same time METEOROLOGICAL conditions also serve as an important basis for ROAD control in the test site. Real time information such as wind SPEED rainfall and visibility provides necessary reference for SITE managers to issue notices on SPEED limits SITE closures and trac restrictions directly aecting the timeliness of ROAD testing safety control. Therefore this article conducts research on the application of METEOROLOGICAL observation SITES in AUTOMOTIVE testing SITES from the construction of METEOROLOGICAL observation SITES METEOROLOGICAL services and abnormal weather ROAD control.
下载PDF
A General Calculating Method of Rotor’s Torsional Stiffness Based on Stiffness Influence Coefficient 被引量:1
2
作者 Danmei Xie Wangfan Li +3 位作者 Ling Yang Yong Qian Xianbo Zhao Zhigang Gao 《Engineering(科研)》 2010年第9期698-704,共7页
In order to develop a general calculating rotor’s torsional stiffness based on stiffness influence coefficient for different rotor assembling, the calculation method of the torsional stiffness influence coefficient o... In order to develop a general calculating rotor’s torsional stiffness based on stiffness influence coefficient for different rotor assembling, the calculation method of the torsional stiffness influence coefficient of equal thickness disc is researched in this paper at first. Then the torsional stiffness influence coefficient λ of equal thickness disc is fit to a binary curved face and a calculation equation is obtained based on a large quantity of calculating data, which lays the foundation for research on a general calculating method of rotor torsional stiffness. Thirdly a simplified calculation method for equivalent stiffness diameter of stepped equal thickness disc and cone disc in the steam turbine generators is suggested. Finally a general calculating program for calculating rotor’s torsional vibration features is developed, and the torsional vibration features of a verity of steam turbine rotors are calculated for verification. The calculating results show that stiffness influence coefficient λ of equal-thickness disc depends on parameters of B and H, as well as the stiffness influence coefficient λ;and discs with complex structure can be simplified to equal-thickness discs with little error by using the method suggested in this paper;error can be controlled within 1% when equivalent diameter of stiffness is calculated by this method. 展开更多
关键词 ROTOR DISC GENERAL calculating method Torsional STIFFNESS STIFFNESS Influence COEFFICIENT
下载PDF
Developments of numerical methods for linear and nonlinear fluid-solid interaction dynamics with applications 被引量:9
3
作者 Jing Tang XING 《力学进展》 EI CSCD 北大核心 2016年第1期95-139,共45页
关键词 linear and nonlinear fluid-solid interactions MIXED FE-substructuremethod MIXED FE-BE method MIXED FE-FD method MIXED FE-SP method fluidsloshing acoustic volumestructure coupling breaking WAVE simulations pressurewaves in fluids LNG ship VLFS-water interaction WAVE energy harvesting
下载PDF
IUID Method-Mix: Towards a Systematic Approach for Intercultural User Interface Design (IUID)
4
作者 Rüdiger Heimgartner 《Journal of Computer and Communications》 2019年第7期162-194,共33页
A method-mix for intercultural user interface design (IUID) is explained and exemplified by application examples based on a hybrid approach covering cultural contexts in human-computer interaction (HCI) design using a... A method-mix for intercultural user interface design (IUID) is explained and exemplified by application examples based on a hybrid approach covering cultural contexts in human-computer interaction (HCI) design using a model of culturally influenced HCI. Cultural influence on HCI is described using cultural variables for user interface design. Assumptions and empirical results regarding the influence of culture on HCI, considering the path of the information processing and the interaction style between Chinese and German users are explained based on cultural models. Subsequent indicators represent the relationship between culture and HCI (culturally imprinted by the user). Correlations adopted theoretically between cultural dimensions and variables for HCI design were investigated. These correlations represent relevant constituents of a model for culturally influenced HCI. Considerations applying this model and evidence for the proper application of the IUID method-mix are presented elucidating why and how cultural aspects play a role in HCI design and usability/UX engineering. The IUID method-mix serves to inspire HCI engineers in the requirement analysis phase as well as HCI designers in the design phase. The readers are thereby sensitized to the challenges of intercultural usability/UX engineering and intercultural HCI design and will be equipped with methodological knowledge relevant to the derivation of design recommendations for user interface design for and in their desired cultural contexts. Finally, implications for practitioners are shown, including HCI style scores and practical design recommendations, to prognosticate the effort and the expenditures for considering the cultural context in IUID. 展开更多
关键词 CULTURE Human Factors UX Usability Engineering INTERCULTURAL User Interface DESIGN method MIX HCI Dimensions HCI HMI Cross-Cultural DESIGN INTERCULTURAL Culture-Centered methods Tools Standards State of Research Cultural Differences COMMUNICATION Understanding Empathy INTERCULTURAL COMMUNICATION INTERCULTURAL HCI DESIGN Process Cycle IUID
下载PDF
Nonlinear calculating method of pile settlement
5
作者 贺炜 王桂尧 王泓华 《Journal of Central South University》 SCIE EI CAS 2008年第S2期63-68,共6页
To study calculating method of settlement on top of extra-long large-diameter pile, the relevant research results were summarized. The hyperbola model, a nonlinear load transfer function, was introduced to establish t... To study calculating method of settlement on top of extra-long large-diameter pile, the relevant research results were summarized. The hyperbola model, a nonlinear load transfer function, was introduced to establish the basic differential equation with load transfer method. Assumed that the displacement of pile shaft was the high order power series of buried depth, through merging the same orthometric items and arranging the relevant coefficients, the solution which could take the nonlinear pile-soil interaction and stratum properties of soil into account was solved by power series. On the basis of the solution, by determining the load transfer depth with criterion of settlement on pile tip, the method by making boundary conditions compatible was advised to solve the load-settlement curve of pile. The relevant flow chart and mathematic expressions of boundary conditions were also listed. Lastly, the load transfer methods based on both two-broken-line model and hyperbola model were applied to analyzing a real project. The related coefficients of fitting curves by hyperbola were not less than 0.96, which shows that the hyperbola model is truthfulness, and is propitious to avoid personal error. The calculating value of load-settlement curve agrees well with the measured one, which indicates that it can be applied in engineering practice and making the theory that limits the design bearing capacity by settlement on pile top comes true. 展开更多
关键词 PILE engineering SETTLEMENT NONLINEAR LOAD TRANSFER method HYPERBOLA model
下载PDF
Calculating method of circle radius using genetic algorithms
6
作者 廖平 喻寿益 钟掘 《中国有色金属学会会刊:英文版》 CSCD 2000年第1期127-129,共3页
Some improved methods of the traditional genetic algorithms were proposed and their application in calculating circle radius was discussed. Simulation shows that real number encoding, simulated annealing and saving th... Some improved methods of the traditional genetic algorithms were proposed and their application in calculating circle radius was discussed. Simulation shows that real number encoding, simulated annealing and saving the best individual into the next generation can effectively improve the accuracy and speed up the searching for global optimization. It is also shown that improved genetic algorithms can effectively calculate the circle radius and be realized easily using computer. 展开更多
关键词 GENETIC ALGORITHMS circle RADIUS calculating method ERROR analysis
下载PDF
A Kinetic Study of Anaerobic Biodegradation of Food and Fruit Residues during Biogas Generation Using Initial Rate Method 被引量:2
7
作者 William Wanasolo Samwel Victor Manyele John Makunza 《Engineering(科研)》 2013年第7期577-586,共10页
A kinetic study of biogas production from Urban Solid Waste (USW) generated in Dar es Salaam city (Tanzania) is presented. An experimental bioreactor simulating mesophilic conditions of most USW landfills was develope... A kinetic study of biogas production from Urban Solid Waste (USW) generated in Dar es Salaam city (Tanzania) is presented. An experimental bioreactor simulating mesophilic conditions of most USW landfills was developed. The goal of the study was to generate the kinetic order of reaction with respect to biodegradable organic waste and use it to model biogas production from food residues mixed with fruit waste. Anaerobic biodegradation was employed under temperature range of 28℃ - 38℃. The main controls were leachate recirculation and pH adjustments to minimize acid inhibitory effects and accelerate waste biodegradation. The experimental setup comprised of three sets of bioreactors. A biodegradation rate law in differential form was proposed and the numerical values of kinetic order and rate constant were determined using initial rate method as 0.994 and 0.3093 mol0.006·day-1, respectively. Results obtained were consistent with that found in literature and model predictions were in reasonable agreement with experimental data. 展开更多
关键词 Urban and MUNICIPAL Solid WASTE BIOGAS Production Anaerobic Biodegradation MESOPHILIC Conditions Order of Reaction Kinetic Model INITIAL Rate method Renewable Energy BIOREACTOR Landfill Biodegradable Organic WASTE
下载PDF
Monte Carlo simulation based thinning and calculating method for noninvasive blood glucose sensing by near-infrared spectroscopy
8
作者 Congcong Ma Jia Qin +3 位作者 Qi Zhang Junsheng Lu Kexin Xu Jingying Jiang 《Journal of Innovative Optical Health Sciences》 SCIE EI CAS 2017年第2期40-51,共12页
Previous results show that the floating reference theory(FRT)is an effective tool to reduce the infuence of interference factors on noninvasive blood glucose sensing by near infrared spectros-copy(NIRS).It is the key ... Previous results show that the floating reference theory(FRT)is an effective tool to reduce the infuence of interference factors on noninvasive blood glucose sensing by near infrared spectros-copy(NIRS).It is the key to measure the floating reference point(FRP)precisely for the application of FRT.Monte Carlo(MC)simulation has been introduced to quantitatively in-vestigate the effects of positioning errors and light source drifts on measuring FRP.In this article,thinning and calculating method(TCM)is proposed to quantify the positioning error.Mean-while,the normalization process(NP)is developed to significantly reduce the error induced by light source drift.The results according to TCM show that 7 purm deviations in positioning can generate about 10.63%relative error in FRP.It is more noticeable that 1%fluctuation in light source intensity may lead to 12.21%relative errors.Gratifyingly,the proposed NP model can effectively reduce the error caused by light source drift.Therefore,the measurement system for FRPs must meet that the positioning error is less than 7 purm,and the light source drift is kept within 1%.Furthermore,an improvement for measurement system is proposed in order to take advantage of the NP model. 展开更多
关键词 Thinning and calculating method Monte Carlo simulation noninvasive blood glucose sensing foating reference theory positioning error light source drift.
下载PDF
Numerical Solution of Nonlinear System of Partial Differential Equations by the Laplace Decomposition Method and the Pade Approximation
9
作者 Magdy Ahmed Mohamed Mohamed Shibl Torky 《American Journal of Computational Mathematics》 2013年第3期175-184,共10页
In this paper, Laplace decomposition method (LDM) and Pade approximant are employed to find approximate solutions for the Whitham-Broer-Kaup shallow water model, the coupled nonlinear reaction diffusion equations and ... In this paper, Laplace decomposition method (LDM) and Pade approximant are employed to find approximate solutions for the Whitham-Broer-Kaup shallow water model, the coupled nonlinear reaction diffusion equations and the system of Hirota-Satsuma coupled KdV. In addition, the results obtained from Laplace decomposition method (LDM) and Pade approximant are compared with corresponding exact analytical solutions. 展开更多
关键词 NONLINEAR SYSTEM of Partial Differential EQUATIONS The LAPLACE Decomposition method The Pade Approximation The COUPLED SYSTEM of the Approximate EQUATIONS for Long WATER Waves The Whitham Broer Kaup Shallow WATER Model The SYSTEM of Hirota-Satsuma COUPLED KdV
下载PDF
Exact Traveling Wave Solutions of Nano-Ionic Solitons and Nano-Ionic Current of MTs Using the exp(-φ (ξ ))-Expansion Method
10
作者 Emad H. M. Zahran 《Advances in Nanoparticles》 2015年第2期25-36,共12页
In this work, the exp(-φ (ξ )) -expansion method is used for the first time to investigate the exact traveling wave solutions involving parameters of nonlinear evolution equations. When these parameters are taken to... In this work, the exp(-φ (ξ )) -expansion method is used for the first time to investigate the exact traveling wave solutions involving parameters of nonlinear evolution equations. When these parameters are taken to be special values, the solitary wave solutions are derived from the exact traveling wave solutions. The validity and reliability of the method are tested by its applications to Nano-ionic solitons wave’s propagation along microtubules in living cells and Nano-ionic currents of MTs which play an important role in biology. 展开更多
关键词 The exp(-φ (ξ )) -Expansion method Nano-Solitons of IONIC Waves Propagation along Microtubules in Living Cells Nano-Ionic Currents of MTS Traveling WAVE SOLUTIONS KINK and Anti KINK WAVE SOLUTIONS
下载PDF
Optimization of Open-cast Mining Procedure Based on RSR Method
11
作者 Qingyou AO Zhongfei LI +2 位作者 Shudong LIU Wenjie XIA Lin LIN 《Asian Agricultural Research》 2024年第4期23-26,32,共5页
To explore the optimal evaluation mechanism of open-cast mining procedure,this paper takes the actual operation status of Huolinhe No.1 Open-cast Mine as the research basis,and makes a deep analysis of the four repres... To explore the optimal evaluation mechanism of open-cast mining procedure,this paper takes the actual operation status of Huolinhe No.1 Open-cast Mine as the research basis,and makes a deep analysis of the four representative mining procedures proposed by this mine.A detailed and comprehensive evaluation system is constructed using rank-sum ratio(RSR)method.The system covers 17 key indicators and aims to evaluate the advantages and disadvantages of each scheme in an all-round and multi-angle manner.Through the calculation and analysis by RSR method,the comprehensive evaluation of the four types of mining procedure schemes is carried out,and finally the secondary river improvement project is determined as the optimal mining implementation scheme,and the joint mining scheme of the south and north areas is the alternative strategy.The research results of this paper are objective,clear and definite,can not only reveal the effectiveness and feasibility of RSR method in solving the problem of open-cast mining procedure optimization,but also provide a strong technical support and decision-making basis for the future production development of Huolinhe No.1 Open-cast Mine.Thus,this study is expected to further promote the scientific and refined process of mining operations. 展开更多
关键词 Mining procedure EVALUATION mechanism Rank-sum ratio (RSR) method Comprehensive EVALUATION OPTIMIZATION
下载PDF
A Modified Four Path Method for Calculating Coupling Field of Super-Low Altitude Aircraft Target
12
作者 Gaoxiang Zou Chuangming Tong +2 位作者 Binglin Yu Hualong Sun Tao Song 《Journal of Computer and Communications》 2018年第12期64-73,共10页
A novel modified four path method (FPM) is presented for calculating coupling field of super-low altitude aircraft target. Based on the hybrid method PO + MEC (Physical Optics and Method of Equivalent Currents), the a... A novel modified four path method (FPM) is presented for calculating coupling field of super-low altitude aircraft target. Based on the hybrid method PO + MEC (Physical Optics and Method of Equivalent Currents), the antenna radiation pattern is introduced to consider the multipath interference from side lobe of seeker. The modified FPM is used to calculate the coupling field from super-low altitude aircraft target above different terrestrial environments. The curves of scattering coefficient are analyzed. The influences of height of target, root mean square (RMS), and incident angle on coupling field characteristics are discussed. The simulation results can be used for reference in detection for super-low altitude target and optimization for radar system. 展开更多
关键词 MODIFIED FOUR Path method Antenna Radiation Pattern Super-Low ALTITUDE AIRCRAFT TARGET Coupling Field BREWSTER Angle
下载PDF
A Study of EM Algorithm as an Imputation Method: A Model-Based Simulation Study with Application to a Synthetic Compositional Data
13
作者 Yisa Adeniyi Abolade Yichuan Zhao 《Open Journal of Modelling and Simulation》 2024年第2期33-42,共10页
Compositional data, such as relative information, is a crucial aspect of machine learning and other related fields. It is typically recorded as closed data or sums to a constant, like 100%. The statistical linear mode... Compositional data, such as relative information, is a crucial aspect of machine learning and other related fields. It is typically recorded as closed data or sums to a constant, like 100%. The statistical linear model is the most used technique for identifying hidden relationships between underlying random variables of interest. However, data quality is a significant challenge in machine learning, especially when missing data is present. The linear regression model is a commonly used statistical modeling technique used in various applications to find relationships between variables of interest. When estimating linear regression parameters which are useful for things like future prediction and partial effects analysis of independent variables, maximum likelihood estimation (MLE) is the method of choice. However, many datasets contain missing observations, which can lead to costly and time-consuming data recovery. To address this issue, the expectation-maximization (EM) algorithm has been suggested as a solution for situations including missing data. The EM algorithm repeatedly finds the best estimates of parameters in statistical models that depend on variables or data that have not been observed. This is called maximum likelihood or maximum a posteriori (MAP). Using the present estimate as input, the expectation (E) step constructs a log-likelihood function. Finding the parameters that maximize the anticipated log-likelihood, as determined in the E step, is the job of the maximization (M) phase. This study looked at how well the EM algorithm worked on a made-up compositional dataset with missing observations. It used both the robust least square version and ordinary least square regression techniques. The efficacy of the EM algorithm was compared with two alternative imputation techniques, k-Nearest Neighbor (k-NN) and mean imputation (), in terms of Aitchison distances and covariance. 展开更多
关键词 Compositional Data Linear Regression Model Least Square method Robust Least Square method Synthetic Data Aitchison Distance Maximum Likelihood Estimation Expectation-Maximization Algorithm k-Nearest Neighbor and Mean imputation
下载PDF
The Effect of the MNRI Method on Neurotransmitter Biomarkers of Individuals with Neurodevelopmental Disorders
14
作者 Clayton Bell Jordan Whitney +4 位作者 Trina Deiss Тatiana Tatarinova Lorri Franckle Susan Beaven Jeffrey Davis 《Neuroscience & Medicine》 2019年第3期292-321,共30页
Introduction: The MNRI (Masgutova Neurosensorimotor Reflex Integration) method was developed in 1989 in Russia and has spread world-wide to treat individuals with certain types reflex development deficits, behavior di... Introduction: The MNRI (Masgutova Neurosensorimotor Reflex Integration) method was developed in 1989 in Russia and has spread world-wide to treat individuals with certain types reflex development deficits, behavior disorders, disorders of speech or language development, and learning disabilities. MNRI is based on techniques called “repatterning” or remodulation, meaning re-education, recoding the reflex nerve pathways specific for dynamic and postural reflex schemes. Objectives: Repatterning activates the extra pyramidal nervous system responsible for automatic mechanisms and processes, the extension of links between neurons, the growth of neural nets, myelination, and the creation of new nerve routing. This potential result was tested utilizing urinary measurements of the following neurotransmitters: epinephrine, norepinephrine, dopamine, DOPAC, serotonin, 5-HIAA, glycine, taurine, GABA, glutamate, PEA, and histamine. Methods: Neurological impact of the Masgutova Neurosensorimotor Reflex Method on the magnitude of changes in neurotransmitters was assessed by an external controlled and double-blind method using patients from one of the four diagnosis groups: 1) global developmental disorders;2) cerebral palsy, Traumatic Brain Injury (TBI), Acute Brain Injury (ABI), and seizures;3) ADD/ADHD;and 4) anxiety disorders. Results: The post-MNRI results in participants show a tendency for regulation of the above neurotransmitters resulting in their calming down, decrease of hypervigilance, stress resilience increase, improvements in behavioral and emotional regulation, positive emotions, and cognitive processes control. Conclusion: The application of the Masgutova Neurosensorimotor Reflex Method as a therapy modality offers a novelty paradigm for the treatment using neuro- and immune-modulation technologies presenting a non-pharmaceutical approach, based on use of neurosensorimotor reflex circuit concept. 展开更多
关键词 Neurotransmitters Masgutova Neurosensorimotor REFLEX method (MNRI) Sensory-Motor REFLEX Integration Immunology Global Developmental DISORDERS Cerebral PALSY Traumatic BRAIN INJURY (TBI) Acute BRAIN INJURY (ABI) Seizures ADD/ADHD and Anxiety DISORDERS
下载PDF
Risk assessment of coastal flooding disaster by storm surge based on Elevation-Area method and hydrodynamic models:Taking Bohai Bay as an example
15
作者 Fu Wang Xue-zheng Liu +3 位作者 Yong Li Heng Yu Ming-zheng Wen Yun-zhuang Hu 《China Geology》 CAS CSCD 2024年第3期494-504,共11页
The future inundation by storm surge on coastal areas are currently ill-defined.With increasing global sealevel due to climate change,the coastal flooding by storm surge is more and more frequently,especially in coast... The future inundation by storm surge on coastal areas are currently ill-defined.With increasing global sealevel due to climate change,the coastal flooding by storm surge is more and more frequently,especially in coastal lowland with land subsidence.Therefore,the risk assessment of such inundation for these areas is of great significance for the sustainable socio-economic development.In this paper,the authors use Elevation-Area method and Regional Ocean Model System(ROMS)model to assess the risk of the inundation of Bohai Bay by storm surge.The simulation results of Elevation-Area method show that either a 50-year or 100-year storm surge can inundate coastal areas exceeding 8000 km^(2);the numerical simulation results based on hydrodynamics,considering ground friction and duration of the storm surge high water,show that a 50-year or 100-year storm surge can only inundate an area of over 2000 km^(2),which is far less than 8000 km^(2);while,when taking into account the land subsidence and sea level rise,the very inundation range will rapidly increase by 2050 and 2100.The storm surge will greatly impact the coastal area within about 10-30 km of the Bohai Bay,in where almost all major coastal projects are located.The prompt response to flood disaster due to storm surge is urgently needed,for which five suggestions have been proposed based on the geological background of Bohai Bay.This study may offer insight into the development of the response and adaptive plans for flooding disasters caused by storm surge. 展开更多
关键词 Storm surge ROMS Elevation-Area method Numerical simulation Land subsidence Flooding disaster Sea level rise Marine geological survey engineering Geological disaster survey engineering Bohai Bay
下载PDF
Calculating Method for Influence of Material Flow on Energy Consumption in Steel Manufacturing Process 被引量:8
16
作者 YU Qing-bo LU Zhong-wu CAI Jiu-ju 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2007年第2期46-51,共6页
From the viewpoint of systems energy conservation, the influences of material flow on its energy consumption in a steel manufacturing process is an important subject. The quantitative analysis of the relationship betw... From the viewpoint of systems energy conservation, the influences of material flow on its energy consumption in a steel manufacturing process is an important subject. The quantitative analysis of the relationship between material flow and the energy intensity is useful to save energy in steel industry. Based on the concept of standard material flow diagram, all possible situations of ferric material flow in steel manufacturing process are analyzed. The expressions of the influence of material flow deviated from standard material flow diagram on energy consumption are put forward. 展开更多
关键词 steel manufacturing process material flow energy consumption calculating method
下载PDF
Computational Methods in the Theory of Synthesis of Radio and Acoustic Radiating Systems
17
作者 Petro Savenko 《Applied Mathematics》 2013年第3期523-549,共27页
A brief review of the works of the author and his co-authors on the application of nonlinear analysis, numerical and analytical methods for solving the nonlinear inverse problems (synthesis problems) for optimizing th... A brief review of the works of the author and his co-authors on the application of nonlinear analysis, numerical and analytical methods for solving the nonlinear inverse problems (synthesis problems) for optimizing the different types of radiating systems, is presented in the paper. The synthesis problems are formulated in variational statements and further they are reduced to research and numerical solution of nonlinear integral equations of Hammerstein type. The existence theorems are proof, the investigation methods of nonuniqueness problem of solutions and numerical algorithms of finding the optimal solutions are proved. 展开更多
关键词 NONLINEAR Inverse Problems Synthesis of Radiating SYSTEMS NONLINEAR Equations of HAMMERSTEIN Type Branching of SOLUTIONS NONLINEAR TWO-PARAMETER Spectral Problem Localization of SOLUTIONS Numerical methods and Algorithms Convergence of ITERATIVE Processes
下载PDF
RECIPROCALLY TOPOGRAPHIC PROJECTIONS BETWEEN THE OPTIC TECTUM AND NUCLEUS ISTHMI IN THE TOAD 被引量:1
18
作者 王荫亭 颜坤 王书荣 《Chinese Science Bulletin》 SCIE EI CAS 1983年第1期139-140,共2页
关键词 In this letter neuronal projections BETWEEN the TOAD (Bufo BUFO gargarizans) optic toctum and nucleus isthmi (NI) are studied by means of horseradish peroxidase (HRP) method and HRP-labeled tectal and isthmic cells are classified.After surgical operation the animal was fixed in a stereotaxic apparatus. HRP (Sigma VI) was iontophorezed into different sites over superficial layers of the tectum in 53 TOADS and throughout NI in 13 TOADS one injection each animal. After their survival of 28 days at 1620 using HRP histochemical method the injected and labeled sites as well as the morphology of the labeled cells were shown.The results indicate that reciprocally topographic projections exist BETWEEN the TOAD optictectum and its ipsilateral NI i. e. an isthmic
原文传递
Extended Jacobian Elliptic Function Expansion Method and Its Applications in Biology
19
作者 Emad H. M. Zahran Mostafa M. A. Khater 《Applied Mathematics》 2015年第7期1174-1181,共8页
In this work, an extended Jacobian elliptic function expansion method is proposed for constructing the exact solutions of nonlinear evolution equations. The validity and reliability of the method are tested by its app... In this work, an extended Jacobian elliptic function expansion method is proposed for constructing the exact solutions of nonlinear evolution equations. The validity and reliability of the method are tested by its applications to Dynamical system in a new Double-Chain Model of DNA and a diffusive predator-prey system which play an important role in biology. 展开更多
关键词 Extended JACOBIAN Elliptic Function Expansion method Dynamical SYSTEM in a New DOUBLE-CHAIN Model of DNA A Diffusive PREDATOR-PREY SYSTEM Traveling WAVE SOLUTIONS Solitary WAVE SOLUTIONS
下载PDF
The assessment of time dependent flow of Williamson fluid with radiative blood flow against a wedge 被引量:1
20
作者 K.Subbarayudu S.Suneetha P.Bala Anki Reddy 《Propulsion and Power Research》 SCIE 2020年第1期87-99,共13页
The present pagination reports both Brownian diffusion and thermophoresis aspects subject to magneto hydrodynamic Williamson fluid model.Assuming the flow is unsteady and blood is treated as Williamson fluid over a we... The present pagination reports both Brownian diffusion and thermophoresis aspects subject to magneto hydrodynamic Williamson fluid model.Assuming the flow is unsteady and blood is treated as Williamson fluid over a wedge with radiation.The governing equations are transformed into ordinary differential equations by using similarity variables.The analytical solutions of the transformed governing equations are obtained by using the RK 4th order method along with shooting technique solver.The effects of various physical parameters such as Hartmann number,local Weissenberg number,radiation parameter,unsteadiness parameter,Prandtl number,Lewis number,Brownian diffusion,thermophoresis,wedge angle parameter,moving wedge parameter,on velocity,temperature,concentration,skin friction,heat transfer rate and mass transfer rate have been discussed in detail.The velocity and temperature profile deprives for larger We and an opposite trend is observed for concentration.The radiation parameter is propositional to temperature and a counter behaviour is observed for Pr. 展开更多
关键词 The present pagination reports both Brownian diffusion and thermophoresis aspects subject to magneto hydrodynamic WILLIAMSON fluid model. Assuming the flow IS unsteady and blood IS treated as WILLIAMSON fluid over a WEDGE with radiation. The governing EQUATIONS are transformed into ordinary differential EQUATIONS by using similarity variables. The analytical solutions of the transformed governing EQUATIONS are obtained by using the RK 4th order method along with shooting technique solver. The effects of various physical parameters such as Hartmann NUMBER local Weissenberg NUMBER radiation PARAMETER unsteadiness PARAMETER Prandtl NUMBER Lewis NUMBER Brownian diffusion thermophoresis WEDGE angle PARAMETER moving WEDGE PARAMETER on velocity temperature concentration skin friction heat transfer rate and mass transfer rate have been discussed in detail. The velocity and temperature profile deprives for larger We and an opposite trend IS observed for concentration. The radiation PARAMETER IS propositional to temperature and a counter behaviour IS observed for Pr.
原文传递
上一页 1 2 250 下一页 到第
使用帮助 返回顶部