Hcable for Time-Lapse Seismic Monitoring of Marine Carbon Capture and Storage

To ensure project safety and secure public support, an integrated and comprehensive monitoring program is needed within a carbon capture and storage(CCS) project. Monitoring can be done using many well-established techniques from various fields, and the seismic method proves to be the crucial one. This method is widely used to determine the CO_(2) distribution, image the plume development, and quantitatively estimate the concentration. Because both the CO_(2) distribution and the potential migration pathway can be spatially small scale, high resolution for seismic imaging is demanded. However, obtaining a high-resolution image of a subsurface structure in marine settings is difficult. Herein, we introduce the novel Hcable(Harrow-like cable system) technique, which may be applied to offshore CCS monitoring. This technique uses a highfrequency source(the dominant frequency>100 Hz) to generate seismic waves and a combination of a long cable and several short streamers to receive seismic waves. Ultrahigh-frequency seismic images are achieved through the processing of Hcable seismic data. Hcable is then applied in a case study to demonstrate its detailed characterization for small-scale structures. This work reveals that Hcable is a promising tool for timelapse seismic monitoring of oceanic CCS.

Secondary Silicates as a Barrier to Carbon Capture and Storage in Deccan Basalt

Investigating the immobilization of CO2,previous basalt-water-CO2 interaction studies revealed the formation of carbonates over a short period,but with the extensive formation of secondary silicates(SS).The mechanisms involved in these processes remain unresolved,so the present study was undertaken to understand secondary mineral formation mechanisms.XRPD and Rietveld refinement data for neo-formed minerals show a drastic decrease in the Ca-O bond length,with the calcite structure degenerating after 80 h(hours).However,SEM images and EDS data revealed that a longer interaction time resulted in the formation of chlorite and smectite,adjacent to basalt grains which prevent basaltwater-CO2 interaction to form carbonates,thus restricting carbonate formation.As a result of this,the CO2 mineralization rate is initially high(till 80 h),but it later reduces drastically.It is evident that,for such temperature-controlled transformations,low temperature is conducive to minimizing SS surface coating at the time of mineral carbonation.

The Joule–Thomson effect of (CO_(2)+H_(2)) binary system relevant to gas switching reforming with carbon capture and storage(CCS)

The Joule-Thomson effect is one of the important thermodynamic properties in the system relevant to gas switching reforming with carbon capture and storage(CCS). In this work, a set of apparatus was set up to determine the Joule-Thomson effect of binary mixtures(CO_(2)+ H_(2)). The accuracy of the apparatus was verified by comparing with the experimental data of carbon dioxide. The Joule-Thomson coefficients(μ_(JT)) for(CO_(2)+ H_(2)) binary mixtures with mole fractions of carbon dioxide(x_(CO_(2))= 0.1, 0.26, 0.5,0.86, 0.94) along six isotherms at various pressures were measured. Five equations of state EOSs(PR,SRK, PR, BWR and GERG-2008 equation) were used to calculate the μ_(JT)for both pure systems and binary systems, among which the GERG-2008 predicted best with a wide range of pressure and temperature.Moreover, the Joule-Thomson inversion curves(JTIC) were calculated with five equations of state. A comparison was made between experimental data and predicted data for the inversion curve of CO_(2). The investigated EOSs show a similar prediction of the low-temperature branch of the JTIC for both pure and binary systems, except for the BWRS equation of state. Among all the equations, SRK has the most similar result to GERG-2008 for predicting JTIC.

Carbon capture and storage,geomechanics and induced seismic activity

Injection of large volumes of carbon dioxide(CO) for the purposes of greenhouse-gas emissions reduction has the potential to induce earthquakes.Operators of proposed projects must therefore take steps to reduce the risks posed by this induced seismicity.In this paper,we examine the causes of injection-induced seismicity(IIS),and how it should be monitored and modelled,and thereby mitigated.Many US case studies are found where fluids are injected into layers that are in close proximity to crystalline basement rocks.We investigate this issue further by comparing injection and seismicity in two areas where oilfield wastewater is injected in significant volumes:Oklahoma,where fluids are injected into a basal layer,and Saskatchewan,where fluids are injected into a much shallower layer.We suggest that the different induced seismicity responses in these two areas are at least in part due to these different injection depths.We go on to outline two different approaches for modelling IIS:a statistics based approach and a physical,numerical modelling based approach.Both modelling types have advantages and disadvantages,but share a need to be calibrated with good quality seismic monitoring data if they are to be used with any degree of reliability.We therefore encourage the use of seismic monitoring networks at all future carbon capture and storage(CCS) sites.

Conversion Carbon Capture and Storage Factors in Temperate Human Controlled Wetland

This paper provides guidance for the quantification and reporting of blue carbon removals in the temperate coastal ecosystems,“Italian valli da pesca”or H.C.W.(Human Controlled Wetland,Lat.45°Lon.12°),where some pools as seagrasses,and salt marshes,are highly efficient at capturing and storing carbon dioxide(CO_(2))from the atmosphere.Halophyte salt marsh plants were found to have a%C on Dry Weight(D.W.)of 32.26±3.91(mean±standard deviation),macrophytes 33.65±7.99,seagrasses 29.23±2.23,tamarisk 48.42±2.80,while the first 5 centimetres of wetland mud,on average,had a%C of 8.56±0.94.Like the ISO(International Organization for Standardization)14064 guideline to quantify the GHG(Greenhouse Gas)emission,we have studied the different conversion factors to be used as a practical tool for measurement the CO_(2)sink activity.These factors are essential to calculate the overall carbon reduction in a project located in temperate wetland using a method as the ISO 14064.2,UNI-BNeutral,VCS VERRA or other that will come.

The European Carbon dioxide Capture and Storage Laboratory Infrastructure(ECCSEL)

The transition to a non-emitting energy mix for power generation will take decades. This transition will need to be sustainable, e.g.economically affordable. Fossil fuels which are abundant have an important role to play in this respect, provided that Carbon Capture and Storage(CCS) is progressively implemented. CCS is the only way to reduce emissions from energy intensive industries.Thus, the need for upgraded and new CCS research facilities is widely recognised among stakeholders across Europe, as emphasised by the Zero Emissions Platform(ZEP) [1] and the European Energy Research Alliance on CCS(EERA-CCS) [2].The European Carbon Dioxide Capture and Storage Laboratory Infrastructure, ECCSEL, provides funders, operators and researchers with significant benefits by offering access to world-class research facilities that, in many cases, are unlikely for a single nation to support in isolation.This implies creation of synergy and the avoidance of duplication as well as streamlining of funding for research facilities.ECCSEL offers open access to its advanced laboratories for talented scientists and visiting researchers to conduct cutting-edge research.In the planning of ECCSEL, gap analyses were performed and CCS technologies have been reviewed to underpin and envisage the future experimental setup; 1) Making use of readily available facilities, 2) Modifying existing facilities, and 3) Planning and building entirely new advanced facilities.The investments required for the first ten years(2015-2025) are expected to be in the range of €80-120 miilion. These investments show the current level of ambition, as proposed during the preparatory phase(2011-2014).Entering the implementation phase in 2015, 9 European countries signed Letter of Intent(LoI) to join a ECCSEL legal entity: France, United Kingdom, Netherlands, Italy, Spain, Poland, Greece, Norway and Switzerland(active observer). As the EU ERIC-regulation [3] would offer the most suitable legal framework for ECCSEL, the host country, Norway, will apply for establishing ERIC as the ECCSEL Research Infrastructure(RI)legal entity in 2017. Until the ECCSEL ERIC is approved by the European Commission(probably by summer 2017), an interim MoU agreement for the implementation phase of ECCSEL RI has been signed by 13 research institutions and universities representing the 9 countries. A consortium of these partners were granted 3 million EURO from Horizon 2020 to boost implementation of ECCSEL from September 2015 and two years onwards.?2016, Institute of Process Engineering, Chinese Academy of Sciences. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co., Ltd. This is an open access article under the CC BY-NC-ND license(http://creativecommons.org/licenses/by-nc-nd/4.0/).

Assessing the Viability of Gandhar Field in India’s Cambay Basin for CO_(2) Storage

Our research is centered on the Gandhar oil field, which was discovered in 1983, where daily oil production has declined significantly over the years. The primary objective was to evaluate the feasibility of carbon dioxide(CO_(2)) storage through its injection into the siliciclastic reservoirs of Ankleshwar Formation. We aimed to obtain high-resolution acoustic impedance data to estimate porosity employing model-based poststack seismic inversion. We conducted an analysis of the density and effective porosity in the target zone through geostatistical techniques and probabilistic neural networks. Simultaneously, the work also involved geomechanical analysis through the computation of pore pressure and fracture gradient using well-log data, geological information, and drilling events in the Gandhar field. Our investigation unveiled spatial variations in effective porosity within the Hazad Member of the Ankleshwar Formation, with an effective porosity exceeding 25% observed in several areas, which indicates the presence of well-connected pore spaces conducive to efficient CO_(2) migration. Geomechanical analysis showed that the vertical stress(Sv) ranged from 55 MPa to 57 MPa in Telwa and from 63.7 MPa to 67.7 MPa in Hazad Member. The pore pressure profile displayed variations along the stratigraphic sequence, with the shale zone, particularly in the Kanwa Formation, attaining the maximum pressure gradient(approximately 36 MPa). However, consistently low pore pressure values(30-34 MPa) considerably below the fracture gradient curves were observed in Hazad Member due to depletion. The results from our analysis provide valuable insights into shaping future field development strategies and exploration of the feasibility of CO_(2) sequestration in Gandhar Field.

Criteria for Selecting Carbon Subsurface and Ocean Storage Site in Developing Countries: A Review

Important first phases in the process of implementing CO2 subsurface and ocean storage projects include selecting of best possible location(s) for CO2 storage, and site selection evaluation. Sites must fulfill a number of criteria that boil down to the following basics: they must be able to accept the desired volume of CO2 at the rate at which it is supplied from the CO2 source(s);they must as well be safe and reliable;and must comply with regulatory and other societal requirements. They also must have at least public acceptance and be based on sound financial analysis. Site geology;hydrogeological, pressure, and geothermal regimes;land features;location, climate, access, etc. can all be refined from these basic criteria. In addition to aiding in site selection, site characterization is essential for other purposes, such as foreseeing the fate and impacts of the injected CO2, and informing subsequent phases of site development, including design, permitting, operation, monitoring, and eventual abandonment. According to data from the IEA, in 2022, emissions from Africa and Asias emerging markets and developing economies, excluding Chinas, increased by 4.2%, which is equivalent to 206 million tonnes of CO2 and were higher than those from developed economies. Coal-fired power generation was responsible for more than half of the rise in emissions that were recorded in the region. The difficulty of achieving sustainable socio-economic progress in the developing countries is entwined with the work of reducing CO2 emissions, which is a demanding project for the economy. Organisations from developing countries, such as Bangladesh, Cameroon, India, and Nigeria, have formed partnerships with organisations in other countries for lessons learned and investment within the climate change arena. The basaltic rocks, coal seams, depleted oil and gas reservoirs, soils, deep saline aquifers, and sedimentary basins that developing countries (Bangladesh, Cameroon, India, and Nigeria etc.) possess all contribute to the individual countrys significant geological sequestration potential. There are limited or no carbon capture and storage or clean development mechanism projects running in these countries at this time. The site selection and characterization procedure are not complete without an estimate of the storage capacity of a storage location. Estimating storage capacity relies on volumetric estimates because a site must accept the planned volume of CO2 during the active injection period. As more and more applications make use of site characterization, so too does the body of written material on the topic. As the science of CO2 storage develops, regulatory requirements are implemented, field experience grows, and the economics of CO2 capture and storage improve, so too will site selection and characterisation change.

Carbon Capture Technologies in OAPEC Member Countries and the Circular Carbon Economy: A Roadmap to Zero Emissions by 2050

Several Organization of Arab Petroleum Exporting Countries (OAPEC) member states (OMSs) have updated their nationally determined contributions (NDCs) with the aim of achieving zero carbon emissions by 2050. Carbon neutrality requires shifting from a linear carbon economy (LCE) to a circular carbon economy (CCE). Carbon capture and storage (CCS) technologies, including reduction, recycle, reuse, removal, and storage technologies, represent an important strategy for achieving such a shift. Herein, we investigate the effects of CCS technology adoption in six OMSs—namely the Kingdom of Saudi Arabia (KSA), Qatar, the United Arab Emirates (UAE), Kuwait, Algeria, and Iraq—by examining their Circular Carbon Economy Index (CCEI) scores, which reflect compliance with CCE-transition policies. Total CCEI, current performance CCEI dimension, and future enabler CCEI dimensions scores were compared among the aforementioned six OMSs and relative to Norway, which was used as a global-high CCEI reference standard. Specifically, CCEI general scope and CCEI oil scope dimension scores were compared. The KSA, Qatar, the UAE, and Kuwait had higher CCEI scores than Algeria and Iraq, reflecting their greater adoption of CCE-transition policies and greater emission-reducing modernization investments. The current performance CCEI scores of Algeria and Iraq appear to be buttressed to some extent by their greater natural carbon sink resources. Based on the findings, we recommend specific actions for OMSs to enhance their CCE transitions and mitigate the negative impacts associated with the associated investments, including: taking rapid practical steps to eliminate carbon oil industry emissions;detailed CCS planning by national oil companies;international cooperation and coordination;and increased investment in domestic CCS utilization infrastructure.

Progress and prospect of carbon dioxide capture, utilization and storage in CNPC oilfields

The development history of carbon capture,utilization and storage for enhanced oil recovery(CCUS-EOR)in China is comprehensively reviewed,which consists of three stages:research and exploration,field test and industrial application.The breakthrough understanding of CO_(2) flooding mechanism and field practice in recent years and the corresponding supporting technical achievements of CCUS-EOR project are systematically described.The future development prospects are also pointed out.After nearly 60 years of exploration,the theory of CO_(2) flooding and storage suitable for continental sedimentary reservoirs in China has been innovatively developed.It is suggested that C7–C15 are also important components affecting miscibility of CO_(2) and crude oil.The mechanism of rapid recovery of formation energy by CO_(2) and significant improvement of block productivity and recovery factor has been verified in field tests.The CCUS-EOR reservoir engineering design technology for continental sedimentary reservoir is established.The technology of reservoir engineering parameter design and well spacing optimization has been developed,which focuses on maintaining miscibility to improve oil displacement efficiency and uniform displacement to improve sweep efficiency.The technology of CO_(2) capture,injection and production process,whole-system anticorrosion,storage monitoring and other whole-process supporting technologies have been initially formed.In order to realize the efficient utilization and permanent storage of CO_(2),it is necessary to take the oil reservoir in the oil-water transition zone into consideration,realize the large-scale CO_(2) flooding and storage in the area from single reservoir to the overall structural control system.The oil reservoir in the oil-water transition zone is developed by stable gravity flooding of injecting CO_(2) from structural highs.The research on the storage technology such as the conversion of residual oil and CO_(2) into methane needs to be carried out.

Nanocomposite sodalite/ceramic membrane for pre-combustion CO2 capture： synthesis and morphological characterization

Carbon capture and storage （CCS） is amongst the possible options to reduce CO2 emission. In the application of CCS, CO2 capture techniques such as adsorption and membrane system have been proposed due to less energy requirement and environmental benign than the absorption process. However, membrane system has drawbacks such as poor membrane reproducibility, scale-up difficulty and high cost of the membrane supports. In this study synthesis and characterization of nanocomposite sodalite （HS）/ceramic membrane via ＂pore-plugging＂ hydrothermal synthesis （PPH） protocol for pre- combustion CO2 capture is reported. The morphology and crystallinity of the as-prepared membranes were checked with scanning electron microscopy and X-ray diffraction. Surface chemistry of the membrane was examined with Fourier Transform Infrared spectroscopy. In nanocomposite architecture membranes, zeolite crystals are embedded within the pores of the supports instead of forming thin-film layers of the zeolite crystals on the surface of the supports. Compared to the conventional in situ direct hydrothermal synthesis, membranes obtained from PPH possess higher mechanical strength and thermal stability. In addition, defect control with nanocomposite architecture membranes is possible because the zeolite crystals are embedded within the pores of the support, thereby limiting the maximum defect size to the pore size of the support. Furthermore, the nanocomposite architecture nature of the membranes safeguards the membrane from shocks or abrasion that could promote formation of defects. The aforementioned advantages of the nanocomposite architecture membranes could be beneficial in developing high performance and cost-effective membrane materials for pre-combustion CO2 capture.

A review of interaction mechanisms and microscopic simulation methods for CO_(2)-water-rock system

This work systematically reviews the complex mechanisms of CO_(2)-water-rock interactions,microscopic simulations of reactive transport(dissolution,precipitation and precipitate migration)in porous media,and microscopic simulations of CO_(2)-water-rock system.The work points out the key issues in current research and provides suggestions for future research.After injection of CO_(2) into underground reservoirs,not only conventional pressure-driven flow and mass transfer processes occur,but also special physicochemical phenomena like dissolution,precipitation,and precipitate migration.The coupling of these processes causes complex changes in permeability and porosity parameters of the porous media.Pore-scale microscopic flow simulations can provide detailed information within the three-dimensional pore and throat space and explicitly observe changes in the fluid-solid interfaces of porous media during reactions.At present,the research has limitations in the decoupling of complex mechanisms,characterization of differential multi-mineral reactions,precipitation generation mechanisms and characterization(crystal nucleation and mineral detachment),simulation methods for precipitation-fluid interaction,and coupling mechanisms of multiple physicochemical processes.In future studies,it is essential to innovate experimental methods to decouple“dissolution-precipitation-precipitate migration”processes,improve the accuracy of experimental testing of minerals geochemical reaction-related parameters,build reliable characterization of various precipitation types,establish precipitation-fluid interaction simulation methods,coordinate the boundary conditions of different physicochemical processes,and,finally,achieve coupled flow simulation of“dissolution-precipitation-precipitate migration”within CO_(2)-water-rock systems.

Carbon peak and carbon neutrality in China:Goals,implementation path and prospects

Climate change is a common problem in human society.The Chinese government promises to peak carbon dioxide emissions by 2030 and strives to achieve carbon neutralization by 2060.The proposal of the goal of carbon peak and carbon neutralization has led China into the era of climate economy and set off a green change with both opportunities and challenges.On the basis of expounding the objectives and specific connotation of China’s carbon peak and carbon neutralization,this paper systematically discusses the main implementation path and the prospect of China’s carbon peak and carbon neutralization.China’s path to realizing carbon neutralization includes four directions:(1)in terms of carbon dioxide emission control:energy transformation path,energy conservation,and emission reduction path;(2)for increasing carbon sink:carbon capture,utilization,and storage path,ecological governance,and land greening path;(3)in key technology development:zero-carbon utilization,coal new energy coupling,carbon capture utilization and storage(CCUS),energy storage technology and other key technology paths required to achieve carbon peak and carbon neutralization;(4)from the angle of policy development:Formulate legal guarantees for the government to promote the carbon trading market;Formulate carbon emission standards for enterprises and increase publicity and education for individuals and society.Based on practicing the goal and path of carbon peak and carbon neutralization,China will vigorously develop low carbon and circular economy and promote green and high-quality economic development;speed up to enter the era of fossil resources and promoting energy transformation;accelerate the integrated innovation of green and low-carbon technologies and promote carbon neutrality.

Life-cycle Assessment of Carbon Dioxide Capture for Enhanced Oil Recovery

The development and deployment of Carbon dioxide Capture and Storage （CCS） technology is a cornerstone of the Norwegian government＇s climate strategy. A number of projects are currently evaluated/planned along the Norwegian West Coast, one at Tjeldbergodden. COe from this project will be utilized in part for enhanced oil recovery in the Halten oil field, in the Norwegian Sea. We study a potential design of such a system. A combined cycle power plant with a gross power output of 832 MW is combined with CO2 capture plant based on a post-combustion capture using amines as a solvent. The captured CO2 is used for enhanced oil recovery （EOR）. We employ a hybrid life-cycle assessment （LCA） method to assess the environmental impacts of the system. The study focuses on the modifications and operations of the platform during EOR. We allocate the impacts connected to the capture of CO2 to electricity production, and the impacts connected to the transport and storage of CO2 to the oil produced. Our study shows a substantial reduction of the greenhouse gas emissions from power production by 80% to 75 g·（kW·h）^-1. It also indicates a reduction of the emissions associated with oil production per unit oil produced, mostly due to the increased oil production. Reductions are especially significant if the additional power demand due to EOR leads to power supply from the land.

Experimental salt cavern in offshore ultra-deep water and well designevaluation for CO_(2) abatement

This paper presents a proposal for an experimental salt cavern in offshore ultra-deep water for CO2 abatement,including the instrumentation plan and well conceptual design evaluated for carbon capture and storage(CCS)application.These studies are based on applied computational mechanics associated with field experimentation that has contributed to the technical feasibility of the underground potash mine at the State of Sergipe in Brazil.This knowhow allowed the stability analysis of several salt caverns for brine production at the State of Alagoas in Brazil and to the drilling through stratified thick layers of salt of the pre-salt reservoirs in Santos Basin.Now,this knowledge has been applied in the design of onshore and offshore salt caverns opened by dissolution for storage of natural gas and CO2.The geomechanical study,through the application of computational mechanics,of offshore giant salt caverns of 450 m high by 150 m in diameter,shows that one cavern can store about 4 billion Sm3 or 7.2 million tons of CO2.Before the construction of the giant cavern,which will be the first gas storage offshore in the world,it has been decided to develop an experimental one,with smaller size,to obtained field parameters.The experimental cavern will allow the calibration of parameters to be used in the structural integrity analysis of the cavern and well for storage of natural gas which is rich in CO2 under high pressure.

CCS Research Development and Deployment in a Clean Energy Future： Lessons from Australia over the Past Two Decades

There is widespread, though by no means universal, recognition of the importance of carbon capture and storage （CCS） as a carbon mitigation technology. However, the rate of deployment does not match what is required for global temperatures to stay well below 2℃. Although some consider the hurdles to achieving the widespread application of CCS to he almost insurmountable, a more optimistic view is that a great deal is now known about CCS through research, demonstration, and deployment. We know how to do it; we are confident it can be done safely and effectively; we know what it costs; and we know that costs are decreasing and will continue to do so. We also know that the world will need CCS as long as countries, companies, and communities continue to use fossil fuels for energy and industrial processes. What is lacking are the necessary policy drivers, along with a technology-neutral approach to decrease carbon emissions in a cost-effective and timely manner while retaining the undoubted benefits of ready access to reliable and secure electricity and energy-intensive industrial products. In this paper, Australia is used as an example of what has been undertaken in CCS over the past 20 years, particularly in research and demonstration, hut also in international collaboration. Progress in the large-scale deployment of CCS in Australia has been too slow. However, the world＇s largest storage project will soon be operational in Australia as part of the Gorgon liquefied natural gas （LNG） project, and investigations are underway into several large-scale CCS Flagship program opportunities. The organization and progress of the Cooperative Research Centre for Greenhouse Gas Technologies （CO2CRC） Otway Project, which is currently Australia＇s only operational storage project, is discussed in some detail because of its relevance to the commercial deployment of CCS. The point is made that there is scope for building on this Otway activity to investigate more broadly （through the proposed Otway Stage 3 and Deep Earth Energy and Environment Programme （AusDEEP）） the role of the subsurface in carbon reduction. There are challenges ahead if CCS is to he deployed as widely as bodies such as the International Energy Agency （IEA） and the Intergovernmental Panel on Climate Change （IPCC） consider to be necessary. Closer international collaboration in CCS will be essential to meeting that challenge.

High adsorption and separation performance of CO_(2) over N2 in azo-based(N=N)pillar[6]arene supramolecular organic frameworks

Azo-based pillar[6]arene supramolecular organic frameworks are reported for CO_(2) and N_(2) adsorption and separation by density functional theory and grand canonical Monte–Carlo simulation.Azo-based pillar[6]arene provides suitable environment for CO_(2) adsorption and selectivity.The adsorption and selectivity results show that introducing azo groups can effectively improve CO_(2) adsorption and selectivity over N_(2),and both CO_(2) adsorption and CO_(2) selectivity over N_(2) follow the sequence pillar[6]arene N_(4)>pillar[6]arene N2>pillar[6]arene.Pillar[6]arene N_(4) exhibits CO_(2) adsorption capacity of1.36 mmol/g,and superior selectivity of CO_(2) over N_(2) of116.75 with equal molar fraction at 1 bar(1 bar=105 Pa)and 298 K.Interaction analysis confirms that both the Coulomb and van derWaals interactions between CO_(2) with pillar[6]arene frameworks are greater than that of N_(2).The stronger affinity of CO_(2) with pillar[6]arene N_(4) than other structures and the larger isosteric heat differences between CO_(2) and N2 rendered pillar[6]arene N4 to present the high CO_(2) adsorption capacity and high CO_(2) selectivity over N_(2).Our results highlight the potential of azo-functionalization as an excellent means to improve pillar[6]arene for CO_(2) capture and separation.

Linear Global Temperature Correlation to Carbon Dioxide Level, Sea Level, and Innovative Solutions to a Projected 6°C Warming by 2100

Too many climate committees, conferences, articles and publications continue to suggest a one and a half (1.5°C) to two degrees (2°C) Celsius as an achievable global limit to climate changes without establishment of any causal link to the proposed anti-warming mechanism. A comprehensive review has found instead that observationally informed projections of climate science underlying climate change offer a different outlook of five to six-degree (5°C - 6°C) increase as “most accurate” with regard to present trends, climate history and models, yielding the most likely outcome for 2100. The most causative triad for the present warming trend from 1950 to the present is identified in this paper: 1) the tripling (3×) of world population;2) the quadrupling (4×) of carbon emissions;and 3) the quintupling (5×) of the world energy consumption. This paper presents a quantitative, linear global temperature correlation to carbon dioxide levels that has great predictive value, a short temporal feedback loop, and the finding that it is also reversible. The Vostok ice core temperature and CO2 values for the past 400,000 years, with past sea level estimates have produced the sufficiently evidential “Hansen’s Graph”. Detailed analysis results in an equation for global average temperature change and an indebted, long-term sea level rise, from even a 20 ppm of CO2 change above 290 ppm, commonly taken as a baseline for levels before 1950. Comparison to the well-known 800,000 year old Dome C ice core is also performed. The best-performing climate change models and observational analysis are seen to project more warming than the average model often relied upon. World atmosphere, temperature, and sea level trends for 2100 and beyond are analyzed. A laboratory experiment proves the dramatic heat-entrapment capability of CO2 compared to pure air, which yields insights into the future global atmospheric system. Policy-relevant climate remediation, including gigaton carbon capture, zero and negative emissions and positive individual action, are reviewed and updated, with recommendations.

Global Environmental Forecast and Roadmap Based on 420 kY of Paleoclimatology

As the world’s population has tripled(3x)since 1950,with another 50%increase expected by 2100,global annual carbon dioxide emissions growth rate has quadrupled(4x)since 1950 and global energy demand has quintupled(5x),all in the same time period.This discontinuous combination can be called a“3-4-5 Triad”and the sudden acceleration in all three arenas is too stressful on the environment and the damaging effects will be felt globally for centuries to come unless drastic action is taken.More importantly,the energy demand at 5x is outstripping the other two.This clearly means that as the population explodes at 3x,the emerging middle class wants almost twice as much as their usual share as fossil-fueled generators spread around the globe and modern conveniences become more and more desirable.However,such energy demand at 5x is an artificial human need that is predicted by RMI.org to result in four to five billion new window-mounted air conditioners by 2050 that will add even more to the global warming caused by increasing atmospheric carbon.By an examination of paleoclimatology for the past 420,000 years,it is demonstrable that reducing the concentration of this single most prolific heat-trapping gas by geoengineering back to pre-industrial levels of less than 300 ppm can actually give humankind a collective control over the world’s rapidly rising average global temperature and once more,a temperate climate to live in.

Monitoring and Quantification of Carbon Dioxide Emissions and Impact of Sea Surface Temperature on Marine Ecosystems as Climate Change Indicators in the Niger Delta Using Geospatial Technology

The Niger Delta marine environment has experienced a series of environmental disasters since the inception of oil and gas exploration,which can be attributed to climate change.Carbon dioxide(CO_(2))emissions and sea surface temperature(T)ties associated with burning fossil fuels,such as gas flaring,vehicular traffic,and marine vessel movement along the sea,are increasing.Using data extracted from the NASA Giovanni satellite’s Atmospheric Infrared Sounder(AIRS)and Moderate Resolution Imaging Spectroradiometer(MODIS),this study mapped the carbon footprint and T along the coastline into the deep sea from 2003 to 2011,using ArcGIS software.The spatial distribution of CO_(2) and T concentrations determined by the inverse distance weighting(IDW)method reveals variations in the study area.The results show an increase in the quantity of the mean tropospheric CO_(2) from July 2003 to December 2011,from 374.5129 ppm to 390.7831 ppm annual CO_(2) emissions,which also reflects a continuous increase.The average Monthly sea surface temperature had a general increasing trend from 25.79℃ in July 2003 to 27.8°C in December,with the Pearson correlation coefficient between CO_(2) and T indicating 50%strongly positive,20%strongly negative,20%weakly positive,and 10%weakly negative.CO_(2) levels,like temperature,follow a seasonal cycle,with a decrease during the wet season due to precipitation dissolving and plant uptake during the growing season,and then a rise during the dry season.Carbon capture and storage technologies must be implemented to benefit the marine ecosystem and human well-being.