Offshore Carbon Capture, Utilization, and Storage

Climate change, resulting from human-caused CO_(2) and other greenhouse gas emissions, is an urgent problem that demands immediate action from everyone. The need to decrease emissions has sparked a renewed emphasis on developing and utilizing offshore Carbon Capture,Utilization,and Storage(CCUS) technologies.While these technologies offer potential solutions to mitigate greenhouse gas emissions,many challenges must be addressed to ensure successful implementation.

Hcable for Time-Lapse Seismic Monitoring of Marine Carbon Capture and Storage

To ensure project safety and secure public support, an integrated and comprehensive monitoring program is needed within a carbon capture and storage(CCS) project. Monitoring can be done using many well-established techniques from various fields, and the seismic method proves to be the crucial one. This method is widely used to determine the CO_(2) distribution, image the plume development, and quantitatively estimate the concentration. Because both the CO_(2) distribution and the potential migration pathway can be spatially small scale, high resolution for seismic imaging is demanded. However, obtaining a high-resolution image of a subsurface structure in marine settings is difficult. Herein, we introduce the novel Hcable(Harrow-like cable system) technique, which may be applied to offshore CCS monitoring. This technique uses a highfrequency source(the dominant frequency>100 Hz) to generate seismic waves and a combination of a long cable and several short streamers to receive seismic waves. Ultrahigh-frequency seismic images are achieved through the processing of Hcable seismic data. Hcable is then applied in a case study to demonstrate its detailed characterization for small-scale structures. This work reveals that Hcable is a promising tool for timelapse seismic monitoring of oceanic CCS.

The Joule–Thomson effect of (CO_(2)+H_(2)) binary system relevant to gas switching reforming with carbon capture and storage(CCS)

The Joule-Thomson effect is one of the important thermodynamic properties in the system relevant to gas switching reforming with carbon capture and storage(CCS). In this work, a set of apparatus was set up to determine the Joule-Thomson effect of binary mixtures(CO_(2)+ H_(2)). The accuracy of the apparatus was verified by comparing with the experimental data of carbon dioxide. The Joule-Thomson coefficients(μ_(JT)) for(CO_(2)+ H_(2)) binary mixtures with mole fractions of carbon dioxide(x_(CO_(2))= 0.1, 0.26, 0.5,0.86, 0.94) along six isotherms at various pressures were measured. Five equations of state EOSs(PR,SRK, PR, BWR and GERG-2008 equation) were used to calculate the μ_(JT)for both pure systems and binary systems, among which the GERG-2008 predicted best with a wide range of pressure and temperature.Moreover, the Joule-Thomson inversion curves(JTIC) were calculated with five equations of state. A comparison was made between experimental data and predicted data for the inversion curve of CO_(2). The investigated EOSs show a similar prediction of the low-temperature branch of the JTIC for both pure and binary systems, except for the BWRS equation of state. Among all the equations, SRK has the most similar result to GERG-2008 for predicting JTIC.

Progress and prospect of carbon dioxide capture, utilization and storage in CNPC oilfields

The development history of carbon capture,utilization and storage for enhanced oil recovery(CCUS-EOR)in China is comprehensively reviewed,which consists of three stages:research and exploration,field test and industrial application.The breakthrough understanding of CO_(2) flooding mechanism and field practice in recent years and the corresponding supporting technical achievements of CCUS-EOR project are systematically described.The future development prospects are also pointed out.After nearly 60 years of exploration,the theory of CO_(2) flooding and storage suitable for continental sedimentary reservoirs in China has been innovatively developed.It is suggested that C7–C15 are also important components affecting miscibility of CO_(2) and crude oil.The mechanism of rapid recovery of formation energy by CO_(2) and significant improvement of block productivity and recovery factor has been verified in field tests.The CCUS-EOR reservoir engineering design technology for continental sedimentary reservoir is established.The technology of reservoir engineering parameter design and well spacing optimization has been developed,which focuses on maintaining miscibility to improve oil displacement efficiency and uniform displacement to improve sweep efficiency.The technology of CO_(2) capture,injection and production process,whole-system anticorrosion,storage monitoring and other whole-process supporting technologies have been initially formed.In order to realize the efficient utilization and permanent storage of CO_(2),it is necessary to take the oil reservoir in the oil-water transition zone into consideration,realize the large-scale CO_(2) flooding and storage in the area from single reservoir to the overall structural control system.The oil reservoir in the oil-water transition zone is developed by stable gravity flooding of injecting CO_(2) from structural highs.The research on the storage technology such as the conversion of residual oil and CO_(2) into methane needs to be carried out.

The European Carbon dioxide Capture and Storage Laboratory Infrastructure(ECCSEL)

The transition to a non-emitting energy mix for power generation will take decades. This transition will need to be sustainable, e.g.economically affordable. Fossil fuels which are abundant have an important role to play in this respect, provided that Carbon Capture and Storage(CCS) is progressively implemented. CCS is the only way to reduce emissions from energy intensive industries.Thus, the need for upgraded and new CCS research facilities is widely recognised among stakeholders across Europe, as emphasised by the Zero Emissions Platform(ZEP) [1] and the European Energy Research Alliance on CCS(EERA-CCS) [2].The European Carbon Dioxide Capture and Storage Laboratory Infrastructure, ECCSEL, provides funders, operators and researchers with significant benefits by offering access to world-class research facilities that, in many cases, are unlikely for a single nation to support in isolation.This implies creation of synergy and the avoidance of duplication as well as streamlining of funding for research facilities.ECCSEL offers open access to its advanced laboratories for talented scientists and visiting researchers to conduct cutting-edge research.In the planning of ECCSEL, gap analyses were performed and CCS technologies have been reviewed to underpin and envisage the future experimental setup; 1) Making use of readily available facilities, 2) Modifying existing facilities, and 3) Planning and building entirely new advanced facilities.The investments required for the first ten years(2015-2025) are expected to be in the range of €80-120 miilion. These investments show the current level of ambition, as proposed during the preparatory phase(2011-2014).Entering the implementation phase in 2015, 9 European countries signed Letter of Intent(LoI) to join a ECCSEL legal entity: France, United Kingdom, Netherlands, Italy, Spain, Poland, Greece, Norway and Switzerland(active observer). As the EU ERIC-regulation [3] would offer the most suitable legal framework for ECCSEL, the host country, Norway, will apply for establishing ERIC as the ECCSEL Research Infrastructure(RI)legal entity in 2017. Until the ECCSEL ERIC is approved by the European Commission(probably by summer 2017), an interim MoU agreement for the implementation phase of ECCSEL RI has been signed by 13 research institutions and universities representing the 9 countries. A consortium of these partners were granted 3 million EURO from Horizon 2020 to boost implementation of ECCSEL from September 2015 and two years onwards.?2016, Institute of Process Engineering, Chinese Academy of Sciences. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co., Ltd. This is an open access article under the CC BY-NC-ND license(http://creativecommons.org/licenses/by-nc-nd/4.0/).

Conversion Carbon Capture and Storage Factors in Temperate Human Controlled Wetland

This paper provides guidance for the quantification and reporting of blue carbon removals in the temperate coastal ecosystems,“Italian valli da pesca”or H.C.W.(Human Controlled Wetland,Lat.45°Lon.12°),where some pools as seagrasses,and salt marshes,are highly efficient at capturing and storing carbon dioxide(CO_(2))from the atmosphere.Halophyte salt marsh plants were found to have a%C on Dry Weight(D.W.)of 32.26±3.91(mean±standard deviation),macrophytes 33.65±7.99,seagrasses 29.23±2.23,tamarisk 48.42±2.80,while the first 5 centimetres of wetland mud,on average,had a%C of 8.56±0.94.Like the ISO(International Organization for Standardization)14064 guideline to quantify the GHG(Greenhouse Gas)emission,we have studied the different conversion factors to be used as a practical tool for measurement the CO_(2)sink activity.These factors are essential to calculate the overall carbon reduction in a project located in temperate wetland using a method as the ISO 14064.2,UNI-BNeutral,VCS VERRA or other that will come.

Characterization of Depleted Hydrocarbon Reservoir AA-01 of KOKA Field in the Niger Delta Basin for Sustainable Sub-Sea Carbon Dioxide Storage

This study characterized the AA-01 depleted hydrocarbon reservoir in the KOKA field, Niger Delta, using a multidimensional approach. This investigation involved data validation analysis, evaluation of site suitability for CO_(2) storage, and compositional simulation of hydrocarbon components. The primary objective was to determine the initial components and behavior of the hydrocarbon system required to optimize the injection of CO_(2) and accompanying impurities, establishing a robust basis for subsequent sequestration efforts in the six wells in the depleted KOKA AA-01 reservoir. The process, simulated using industry software such as ECLIPSE, PVTi, SCAL, and Petrel, included a compositional fluid analysis to confirm the pressure volume temperature(PVT) hydrocarbon phases and components. This involved performing a material balance on the quality of the measured data and matching the initial reservoir pressure with the supplied data source. The compositional PVT analysis adopted the Peng–Robinson equation of state to model fluid flow in porous media and estimate the necessary number of phases and components to describe the system accurately. Results from this investigation indicate that the KOKA AA-01 reservoir is suitable for CO_(2)sequestration. This conclusion is based on the reservoir's good quality, evidenced by an average porosity of 0.21 and permeability of 1 111.0 mD, a measured lithological depth of 9 300 ft, and characteristic reservoir – seal properties correlated from well logs. The study confirmed that volumetric behavior predictions are directly linked to compositional behavior predictions, which are essential during reservoir initialization and data quality checks. Additionally, it highlighted that a safe design for CO_(2) storage relies on accurately representing multiphase behaviour across wide-ranging pressure–temperature–composition conditions.

Criteria for Selecting Carbon Subsurface and Ocean Storage Site in Developing Countries: A Review

Important first phases in the process of implementing CO2 subsurface and ocean storage projects include selecting of best possible location(s) for CO2 storage, and site selection evaluation. Sites must fulfill a number of criteria that boil down to the following basics: they must be able to accept the desired volume of CO2 at the rate at which it is supplied from the CO2 source(s);they must as well be safe and reliable;and must comply with regulatory and other societal requirements. They also must have at least public acceptance and be based on sound financial analysis. Site geology;hydrogeological, pressure, and geothermal regimes;land features;location, climate, access, etc. can all be refined from these basic criteria. In addition to aiding in site selection, site characterization is essential for other purposes, such as foreseeing the fate and impacts of the injected CO2, and informing subsequent phases of site development, including design, permitting, operation, monitoring, and eventual abandonment. According to data from the IEA, in 2022, emissions from Africa and Asias emerging markets and developing economies, excluding Chinas, increased by 4.2%, which is equivalent to 206 million tonnes of CO2 and were higher than those from developed economies. Coal-fired power generation was responsible for more than half of the rise in emissions that were recorded in the region. The difficulty of achieving sustainable socio-economic progress in the developing countries is entwined with the work of reducing CO2 emissions, which is a demanding project for the economy. Organisations from developing countries, such as Bangladesh, Cameroon, India, and Nigeria, have formed partnerships with organisations in other countries for lessons learned and investment within the climate change arena. The basaltic rocks, coal seams, depleted oil and gas reservoirs, soils, deep saline aquifers, and sedimentary basins that developing countries (Bangladesh, Cameroon, India, and Nigeria etc.) possess all contribute to the individual countrys significant geological sequestration potential. There are limited or no carbon capture and storage or clean development mechanism projects running in these countries at this time. The site selection and characterization procedure are not complete without an estimate of the storage capacity of a storage location. Estimating storage capacity relies on volumetric estimates because a site must accept the planned volume of CO2 during the active injection period. As more and more applications make use of site characterization, so too does the body of written material on the topic. As the science of CO2 storage develops, regulatory requirements are implemented, field experience grows, and the economics of CO2 capture and storage improve, so too will site selection and characterisation change.

Carbon Capture Technologies in OAPEC Member Countries and the Circular Carbon Economy: A Roadmap to Zero Emissions by 2050

Several Organization of Arab Petroleum Exporting Countries (OAPEC) member states (OMSs) have updated their nationally determined contributions (NDCs) with the aim of achieving zero carbon emissions by 2050. Carbon neutrality requires shifting from a linear carbon economy (LCE) to a circular carbon economy (CCE). Carbon capture and storage (CCS) technologies, including reduction, recycle, reuse, removal, and storage technologies, represent an important strategy for achieving such a shift. Herein, we investigate the effects of CCS technology adoption in six OMSs—namely the Kingdom of Saudi Arabia (KSA), Qatar, the United Arab Emirates (UAE), Kuwait, Algeria, and Iraq—by examining their Circular Carbon Economy Index (CCEI) scores, which reflect compliance with CCE-transition policies. Total CCEI, current performance CCEI dimension, and future enabler CCEI dimensions scores were compared among the aforementioned six OMSs and relative to Norway, which was used as a global-high CCEI reference standard. Specifically, CCEI general scope and CCEI oil scope dimension scores were compared. The KSA, Qatar, the UAE, and Kuwait had higher CCEI scores than Algeria and Iraq, reflecting their greater adoption of CCE-transition policies and greater emission-reducing modernization investments. The current performance CCEI scores of Algeria and Iraq appear to be buttressed to some extent by their greater natural carbon sink resources. Based on the findings, we recommend specific actions for OMSs to enhance their CCE transitions and mitigate the negative impacts associated with the associated investments, including: taking rapid practical steps to eliminate carbon oil industry emissions;detailed CCS planning by national oil companies;international cooperation and coordination;and increased investment in domestic CCS utilization infrastructure.

Secondary Silicates as a Barrier to Carbon Capture and Storage in Deccan Basalt

Investigating the immobilization of CO2,previous basalt-water-CO2 interaction studies revealed the formation of carbonates over a short period,but with the extensive formation of secondary silicates(SS).The mechanisms involved in these processes remain unresolved,so the present study was undertaken to understand secondary mineral formation mechanisms.XRPD and Rietveld refinement data for neo-formed minerals show a drastic decrease in the Ca-O bond length,with the calcite structure degenerating after 80 h(hours).However,SEM images and EDS data revealed that a longer interaction time resulted in the formation of chlorite and smectite,adjacent to basalt grains which prevent basaltwater-CO2 interaction to form carbonates,thus restricting carbonate formation.As a result of this,the CO2 mineralization rate is initially high(till 80 h),but it later reduces drastically.It is evident that,for such temperature-controlled transformations,low temperature is conducive to minimizing SS surface coating at the time of mineral carbonation.

储液式CCS耦合P2G的综合能源系统低碳经济调度

为应对电转气P2G(power-to-gas)和碳捕集系统CCS(carbon capture system)在可再生能源出力不足时耦合失效的问题,考虑对常规CCS引入CO_(2)储液罐以加强P2G和CCS的耦合。首先,构建储液式CCS和P2G的耦合模型,利用储液罐将CCS捕集的CO_(2)时移至可再生能源富足时段,供P2G再利用;其次,构建储液式CCS与P2G耦合的电热气综合能源系统日前优化调度模型;最后,以北方某工业园区为例进行仿真。结果证明所提模型可以充分利用CCS捕集的CO_(2),从而获得更好的经济和环境效益。

Technical Perspective of Carbon Capture,Utilization,and Storage

Carbon dioxide(CO_(2))is the primary greenhouse gas contributing to anthropogenic climate change which is associated with human activities.The majority of CO_(2) emissions are results of the burning of fossil fuels for energy,as well as industrial processes such as steel and cement production.Carbon capture,utilization,and storage(CCUS)is a sustainable technology promising in terms of reducing CO_(2) emissions that would otherwise contribute to climate change.From this perspective,the discussion on carbon capture focuses on chemical absorption technology,primarily due to its commercialization potential.The CO_(2) absorptive capacity and absorption rate of various chemical solvents have been summarized.The carbon utilization focuses on electrochemical conversion routes converting CO_(2) into potentially valuable chemicals which have received particular attention in recent years.The Faradaic conversion efficiencies for various CO_(2) reduction products are used to describe efficiency improvements.For carbon storage,successful deployment relies on a better understanding of fluid mechanics,geomechanics,and reactive transport,which are discussed in details.

西南油气田CCUS/CCS发展现状、优势与挑战

中国石油西南油气田公司(以下简称西南油气田)是中国西南地区首个天然气年产量超400×10^(8) m^(3)的油气生产企业,其天然气新建产能、产量的增量分别占到全国增量的1/4和1/3,预计2030年天然气开发的碳排放量将突破500×10^(4) t。为解决天然气高质量上产过程中碳排放量刚性增长的问题,西南油气田主动围绕“天然气+CCUS”的战略规划,积极部署CCUS/CCS工作,以期打造“绿色能源西南模式”,助力实现“双碳”目标。为此,系统阐述了西南油气田在CCUS/CCS业务规划、标准体系、技术系列等方面的发展现状,梳理了其CCUS/CCS业务在资源、技术方面的优势,并分析了面临的技术成熟度不高、经济效益缺乏、社会接受度不高等挑战,最后作出了展望并有针对性地提出了下一步建议:①攻关形成具有气田特色的CCUS/CCS技术体系,打造气田CCUS/CCS原创技术策源地;②建立气田CCUS/CCS标准体系,推广应用气田CO_(2)驱气提高采收率(CCUS-EGR)和CO_(2)埋存技术;③依托西南油气田自有碳捕集、输送、驱气、封存等技术,进一步延伸拓展传统油气主营业务产业链,建立西南片区CCUS/CCS产业集群和碳库,助力中国石油成为CCUS/CCS产业链链长;④探索页岩气注CO_(2)及混合气体提高采收率技术,支撑在页岩气领域开辟新的CCUS方向。

Progress and prospects of carbon dioxide capture,EOR-utilization and storage industrialization

Carbon dioxide capture,EOR-utilization and storage(CCUS-EOR)are the most practical and feasible large-scale carbon reduction technologies,and also the key technologies to greatly improve the recovery of low-permeability oil fields.This paper sorts out the main course of CCUS-EOR technological development abroad and its industrialization progress.The progress of CCUS-EOR technological research and field tests in China are summarized,the development status,problems and challenges of the entire industry chain of CO_(2) capture,transportation,oil displacement,and storage are analyzed.The results show a huge potential of the large-scale application of CCUS-EOR in China in terms of carbon emission reduction and oil production increase.At present,CCUS-EOR in China is in a critical stage of development,from field pilot tests to industrialization.Aiming at the feature of continental sedimentary oil and gas reservoirs in China,and giving full play to the advantages of the abundant reserves for CO_(2) flooding,huge underground storage space,surface infrastructure,and wide distribution of wellbore injection channels,by cooperating with carbon emission enterprises,critical technological research and demonstration project construction should be accelerated,including the capture of low-concentration CO_(2) at low-cost and on large-scale,supercritical CO_(2) long-distance transportation,greatly enhancing oil recovery and storage rate,and CO_(2) large-scale and safe storage.CCUS-EOR theoretical and technical standard system should be constructed for the whole industrial chain to support and promote the industrial scale application,leading the rapid and profitable development of CCUS-EOR emerging industrial chain with innovation.

Carbon capture and storage,geomechanics and induced seismic activity

Injection of large volumes of carbon dioxide(CO) for the purposes of greenhouse-gas emissions reduction has the potential to induce earthquakes.Operators of proposed projects must therefore take steps to reduce the risks posed by this induced seismicity.In this paper,we examine the causes of injection-induced seismicity(IIS),and how it should be monitored and modelled,and thereby mitigated.Many US case studies are found where fluids are injected into layers that are in close proximity to crystalline basement rocks.We investigate this issue further by comparing injection and seismicity in two areas where oilfield wastewater is injected in significant volumes:Oklahoma,where fluids are injected into a basal layer,and Saskatchewan,where fluids are injected into a much shallower layer.We suggest that the different induced seismicity responses in these two areas are at least in part due to these different injection depths.We go on to outline two different approaches for modelling IIS:a statistics based approach and a physical,numerical modelling based approach.Both modelling types have advantages and disadvantages,but share a need to be calibrated with good quality seismic monitoring data if they are to be used with any degree of reliability.We therefore encourage the use of seismic monitoring networks at all future carbon capture and storage(CCS) sites.

Mapping Highly Cost-Effective Carbon Capture and Storage Opportunities in India

Carbon dioxide (CO2) is the primary anthropogenic greenhouse gas (GHG). India’s CO2 emissions are expected to increase 70% by 2025. Geologic carbon storage (GCS) offers a way to reduce CO2 emissions. Here we present the results of a search for the most cost-effective GCS opportunities in India. Source-Sink matching for large and concentrated CO2 sources near geological storage in India indicates one very high priority target, a fertilizer plant in the city of Narmadanagar in Bharuch District of Gujarat Province, India that is <20 km from old oil and gas fields in the Cambay Basin. Two pure CO2 sources are <20 km from deep saline aquifers and one

淮南煤田各类型地质体CCS源汇潜力评估及其匹配性

开展淮南煤田各类型地质体CCUS源汇潜力评估及其匹配性研究,对于CO_(2)–ECBM技术工程化推广意义深远。以淮南煤田各类型地质体(深部不可采煤层、残留煤体、采空区)为研究对象,首先,探讨了各类型地质体CO_(2)地质封存潜力评估方法;其次,分析了各类型地质体CO_(2)地质封存潜力;然后,基于成本最低目标函数及改进节约里程法,开展了CO_(2)地质封存源汇匹配研究,并优化了其管网设计;最后,基于3步走思路,提出了CCS源汇管网规划设计思路的系统建议。研究结果表明:燃煤电厂年平均CO_(2)排放量为0.588亿t,深部不可采煤层、残留煤体及采空区内CO_(2)地质封存总潜力分别为7.6200亿、0.0517亿、0.8246亿t,可分别封存CO_(2)12.97 a、0.088 a及1.40 a;10 a周期内,深部不可采煤层可封存CO_(2)5.876亿t,累计规划管道217.0960 km,需要资金373亿美元;1.45 a周期内,生产矿井及关闭矿井可封存CO_(2)0.852亿t,累计规划管道464.5161 km,需要资金73.6亿美元;基于改进节约里程法,CCS源汇匹配各地质封存汇点累计节约里程266.6127 km,累计节约成本11.21亿美元,分别占管道运输总里程、总成本的57.40%、79.95%;基于3步走思路,可分阶段、分区域实现淮南煤田各CO_(2)排放源及CO_(2)封存汇的全线贯通,可实现CO_(2)的全部运输及地质封存。

Assessing the Viability of Gandhar Field in India’s Cambay Basin for CO_(2) Storage

Our research is centered on the Gandhar oil field, which was discovered in 1983, where daily oil production has declined significantly over the years. The primary objective was to evaluate the feasibility of carbon dioxide(CO_(2)) storage through its injection into the siliciclastic reservoirs of Ankleshwar Formation. We aimed to obtain high-resolution acoustic impedance data to estimate porosity employing model-based poststack seismic inversion. We conducted an analysis of the density and effective porosity in the target zone through geostatistical techniques and probabilistic neural networks. Simultaneously, the work also involved geomechanical analysis through the computation of pore pressure and fracture gradient using well-log data, geological information, and drilling events in the Gandhar field. Our investigation unveiled spatial variations in effective porosity within the Hazad Member of the Ankleshwar Formation, with an effective porosity exceeding 25% observed in several areas, which indicates the presence of well-connected pore spaces conducive to efficient CO_(2) migration. Geomechanical analysis showed that the vertical stress(Sv) ranged from 55 MPa to 57 MPa in Telwa and from 63.7 MPa to 67.7 MPa in Hazad Member. The pore pressure profile displayed variations along the stratigraphic sequence, with the shale zone, particularly in the Kanwa Formation, attaining the maximum pressure gradient(approximately 36 MPa). However, consistently low pore pressure values(30-34 MPa) considerably below the fracture gradient curves were observed in Hazad Member due to depletion. The results from our analysis provide valuable insights into shaping future field development strategies and exploration of the feasibility of CO_(2) sequestration in Gandhar Field.

Improving Prediction Accuracy of a Rate-Based Model of an MEA-BasedCarbon Capture Process for Large-Scale Commercial Deployment

Carbon capture and storage （CCS） technology will play a critical role in reducing anthropogenic carbondioxide （CO2） emission from fossil-fired power plants and other energy-intensive processes. However, theincrement of energy cost caused by equipping a carbon capture process is the main barrier to its commer-cial deployment. To reduce the capital and operating costs of carbon capture, great efforts have been madeto achieve optimal design and operation through process modeling, simulation, and optimization. Accuratemodels form an essential foundation for this purpose. This paper presents a study on developing a moreaccurate rate-based model in Aspen Plus for the monoethanolamine （MEA）-based carbon capture processby multistage model validations. The modeling framework for this process was established first. The steady-state process model was then developed and validated at three stages, which included a thermodynamicmodel, physical properties calculations, and a process model at the pilot plant scale, covering a wide rangeof pressures, temperatures, and CO2 loadings. The calculation correlations of liquid density and interfacialarea were updated by coding Fortran subroutines in Aspen Plus. The validation results show that the cor-relation combination for the thermodynamic model used in this study has higher accuracy than those ofthree other key publications and the model prediction of the process model has a good agreement with thepilot plant experimental data. A case study was carried out for carbon capture from a 250 MWe combinedcycle gas turbine （CCGT） power plant. Shorter packing height and lower specific duty were achieved usingthis accurate model.

CCS Membrane Development at CIUDEN’s Technology Development Centre for CO₂Capture

CO2 concentration to the atmosphere has risen faster than ever in the last century. This is highly due to fossil fuel combustion which is the major anthropogenic CO2 source. Membrane technology is an important alternative for reliability, flexibility and economically competitiveness for Carbon Capture and Storage (CCS) processes. The use of membranes has applicability to CCS technologies mainly for CO2, O2 or H2 separation, although most of the membrane studies for CO2/O2 production have been carried out at laboratory scale and will require a step further for commercial scale. This paper will present current membranes R & D needs when applied to CCS systems and CIUDEN capabilities for membrane technological development and testing under real conditions. It covers from O2 separation membrane integration in the process, and applied to the oxy-combustion CO2 capture, to post-combustion technologies for membrane CO2 separation, tested under real conditions or H2 production catalytic-membranes through gasification. At CIUDEN CCS facility important membrane evaluations can be carried out for the module integration, testing of materials performance and behavior under real conditions.