High-throughput microfluidic production of carbon capture microcapsules:fundamentals,applications,and perspectives

In the last three decades,carbon dioxide(CO_(2)) emissions have shown a significant increase from various sources.To address this pressing issue,the importance of reducing CO_(2) emissions has grown,leading to increased attention toward carbon capture,utilization,and storage strategies.Among these strategies,monodisperse microcapsules,produced by using droplet microfluidics,have emerged as promising tools for carbon capture,offering a potential solution to mitigate CO_(2) emissions.However,the limited yield of microcapsules due to the inherent low flow rate in droplet microfluidics remains a challenge.In this comprehensive review,the high-throughput production of carbon capture microcapsules using droplet microfluidics is focused on.Specifically,the detailed insights into microfluidic chip fabrication technologies,the microfluidic generation of emulsion droplets,along with the associated hydrodynamic considerations,and the generation of carbon capture microcapsules through droplet microfluidics are provided.This review highlights the substantial potential of droplet microfluidics as a promising technique for large-scale carbon capture microcapsule production,which could play a significant role in achieving carbon neutralization and emission reduction goals.

Indispensable gutter layers in thin-film composite membranes for carbon capture

Industrial thin-film composite(TFC)membranes achieve superior gas separation properties from high-performance selective layer materials,while the success of membrane technology relies on high-performance gutter layers to achieve production scalability and low-cost manufacturing.However,the current literature predominantly focuses on the design of polymer architectures to obtain high permeability and selectivity,while the art of fabricating gutter layers is usually safeguarded by industrial manufacturers and appears lackluster to academic researchers.This is the first report aiming to provide a comprehensive and critical review of state-of-the-art gutter layer materials and their design and modification to enable TFC membranes with superior separation performance.We first elucidate the importance of the gutter layer on membrane performance through modeling and experimental results.Then various gutter layer materials used to obtain high-performance composite membranes are critically reviewed,and the strategies to improve their compatibility with the selective layer are highlighted,such as oxygen plasma treatment,polydopamine deposition,and surface grafting.Finally,we present the opportunities of the gutter layer design for practical applications.

Hcable for Time-Lapse Seismic Monitoring of Marine Carbon Capture and Storage

To ensure project safety and secure public support, an integrated and comprehensive monitoring program is needed within a carbon capture and storage(CCS) project. Monitoring can be done using many well-established techniques from various fields, and the seismic method proves to be the crucial one. This method is widely used to determine the CO_(2) distribution, image the plume development, and quantitatively estimate the concentration. Because both the CO_(2) distribution and the potential migration pathway can be spatially small scale, high resolution for seismic imaging is demanded. However, obtaining a high-resolution image of a subsurface structure in marine settings is difficult. Herein, we introduce the novel Hcable(Harrow-like cable system) technique, which may be applied to offshore CCS monitoring. This technique uses a highfrequency source(the dominant frequency>100 Hz) to generate seismic waves and a combination of a long cable and several short streamers to receive seismic waves. Ultrahigh-frequency seismic images are achieved through the processing of Hcable seismic data. Hcable is then applied in a case study to demonstrate its detailed characterization for small-scale structures. This work reveals that Hcable is a promising tool for timelapse seismic monitoring of oceanic CCS.

Technological advancement and industrialization path of Sinopec in carbon capture,utilization and storage,China

Carbon capture,utilization and storage(CCUS)technology is an important means to effectively reduce carbon emissions from fossil energy combustion and industrial processes.With the crisis of climate change,CCUS has attracted increasing attention in the world.CCUS technology as developed rapidly in China is technically feasible for large-scale application in various industries.The R&D and demonstration of CCUS in China Petroleum&Chemical Corporation(Sinopec)are summarized,including carbon capture,carbon transport,CO_(2)enhanced energy recovery(including oil,gas,and water,etc.),and comprehensive utilization of CO_(2).Based on the source-sink matching characteristics in China,two CCUS industrialization scenarios are proposed,namely,CO_(2)-EOR,CO_(2)-driven enhanced oil recovery using centralized carbon sinks in East China and CO_(2)-EWR,CO_(2)-driven enhanced water recovery(EWR)using centralized carbon sources from the coal chemical industry in West China.Finally,a CCUS industrialization path from Sinopec's perspective is suggested,using CO_(2)-EOR as the major means and CO_(2)-EWR,CO_(2)-driven enhanced gas recovery(CO_(2)-EGR)and other utilization methods as important supplementary means.

Novel in-capsule synthesis of metal-organic framework for innovative carbon dioxide capture system

Metal-Organic Frameworks(MOFs)have been developed as solid sorbents for CO_(2) capture applications and their properties can be controlled by tuning the chemical blocks of their crystalline units.A number of MOFs(e.g.,HKUST-1)have been developed but the question remains how to deploy them for gas-solid contact.Unfortunately,the direct use of MOFs as nanocrystals would lead to serious problems and risks.Here,for the first time,we report a novel MOF-based hybrid sorbent that is produced via an innovative in-situ microencapsulated synthesis.Using a custom-made double capillary microfluidic assembly,double emulsions of the MOF precursor solutions and UV-curable silicone shell fluid are produced.Subsequently,HKUST-1 MOF is successfully synthesized within the droplets enclosed in the gas permeable microcapsules.The developed MOF-bearing microcapsules uniquely allow the deployment of functional nanocrystals without the challenge of handling ultrafine particles,and further,can selectively reject undesired compounds to protect encapsulated MOFs.

Low-Carbon Dispatch of an Integrated Energy System Considering Confidence Intervals for Renewable Energy Generation

Addressing the insufficiency in down-regulation leeway within integrated energy systems stemming from the erratic and volatile nature of wind and solar renewable energy generation,this study focuses on formulating a coordinated strategy involving the carbon capture unit of the integrated energy system and the resources on the load storage side.A scheduling model is devised that takes into account the confidence interval associated with renewable energy generation,with the overarching goal of optimizing the system for low-carbon operation.To begin with,an in-depth analysis is conducted on the temporal energy-shifting attributes and the low-carbon modulation mechanisms exhibited by the source-side carbon capture power plant within the context of integrated and adaptable operational paradigms.Drawing from this analysis,a model is devised to represent the adjustable resources on the charge-storage side,predicated on the principles of electro-thermal coupling within the energy system.Subsequently,the dissimilarities in the confidence intervals of renewable energy generation are considered,leading to the proposition of a flexible upper threshold for the confidence interval.Building on this,a low-carbon dispatch model is established for the integrated energy system,factoring in the margin allowed by the adjustable resources.In the final phase,a simulation is performed on a regional electric heating integrated energy system.This simulation seeks to assess the impact of source-load-storage coordination on the system’s low-carbon operation across various scenarios of reduction margin reserves.The findings underscore that the proactive scheduling model incorporating confidence interval considerations for reduction margin reserves effectively mitigates the uncertainties tied to renewable energy generation.Through harmonized orchestration of source,load,and storage elements,it expands the utilization scope for renewable energy,safeguards the economic efficiency of system operations under low-carbon emission conditions,and empirically validates the soundness and efficacy of the proposed approach.

Carbon Capture Technologies in OAPEC Member Countries and the Circular Carbon Economy: A Roadmap to Zero Emissions by 2050

Several Organization of Arab Petroleum Exporting Countries (OAPEC) member states (OMSs) have updated their nationally determined contributions (NDCs) with the aim of achieving zero carbon emissions by 2050. Carbon neutrality requires shifting from a linear carbon economy (LCE) to a circular carbon economy (CCE). Carbon capture and storage (CCS) technologies, including reduction, recycle, reuse, removal, and storage technologies, represent an important strategy for achieving such a shift. Herein, we investigate the effects of CCS technology adoption in six OMSs—namely the Kingdom of Saudi Arabia (KSA), Qatar, the United Arab Emirates (UAE), Kuwait, Algeria, and Iraq—by examining their Circular Carbon Economy Index (CCEI) scores, which reflect compliance with CCE-transition policies. Total CCEI, current performance CCEI dimension, and future enabler CCEI dimensions scores were compared among the aforementioned six OMSs and relative to Norway, which was used as a global-high CCEI reference standard. Specifically, CCEI general scope and CCEI oil scope dimension scores were compared. The KSA, Qatar, the UAE, and Kuwait had higher CCEI scores than Algeria and Iraq, reflecting their greater adoption of CCE-transition policies and greater emission-reducing modernization investments. The current performance CCEI scores of Algeria and Iraq appear to be buttressed to some extent by their greater natural carbon sink resources. Based on the findings, we recommend specific actions for OMSs to enhance their CCE transitions and mitigate the negative impacts associated with the associated investments, including: taking rapid practical steps to eliminate carbon oil industry emissions;detailed CCS planning by national oil companies;international cooperation and coordination;and increased investment in domestic CCS utilization infrastructure.

The Joule–Thomson effect of (CO_(2)+H_(2)) binary system relevant to gas switching reforming with carbon capture and storage(CCS)

The Joule-Thomson effect is one of the important thermodynamic properties in the system relevant to gas switching reforming with carbon capture and storage(CCS). In this work, a set of apparatus was set up to determine the Joule-Thomson effect of binary mixtures(CO_(2)+ H_(2)). The accuracy of the apparatus was verified by comparing with the experimental data of carbon dioxide. The Joule-Thomson coefficients(μ_(JT)) for(CO_(2)+ H_(2)) binary mixtures with mole fractions of carbon dioxide(x_(CO_(2))= 0.1, 0.26, 0.5,0.86, 0.94) along six isotherms at various pressures were measured. Five equations of state EOSs(PR,SRK, PR, BWR and GERG-2008 equation) were used to calculate the μ_(JT)for both pure systems and binary systems, among which the GERG-2008 predicted best with a wide range of pressure and temperature.Moreover, the Joule-Thomson inversion curves(JTIC) were calculated with five equations of state. A comparison was made between experimental data and predicted data for the inversion curve of CO_(2). The investigated EOSs show a similar prediction of the low-temperature branch of the JTIC for both pure and binary systems, except for the BWRS equation of state. Among all the equations, SRK has the most similar result to GERG-2008 for predicting JTIC.

Research on the bi-layer low carbon optimization strategy of integrated energy system based on Stackelberg master slave game

With increasing reforms related to integrated energy systems(IESs),each energy subsystem,as a participant based on bounded rationality,significantly influences the optimal scheduling of the entire IES through mutual learning and imitation.A reasonable multiagent joint operation strategy can help this system meet its low-carbon objectives.This paper proposes a bilayer low-carbon optimal operational strategy for an IES based on the Stackelberg master-slave game and multiagent joint operation.The studied IES includes cogeneration,power-to-gas,and carbon capture systems.Based on the Stackelberg master-slave game theory,sellers are used as leaders in the upper layer to set the prices of electricity and heat,while energy producers,energy storage providers,and load aggregators are used as followers in the lower layer to adjust the operational strategy of the system.An IES bilayer optimization model based on the Stackelberg master-slave game was developed.Finally,the Karush-Kuhn-Tucker(KKT)condition and linear relaxation technology are used to convert the bilayer game model to a single layer.CPLEX,which is a mathematical program solver,is used to solve the equilibrium problem and the carbon emission trading cost of the system when the benefits of each subject reach maximum and to analyze the impact of different carbon emission trading prices and growth rates on the operational strategy of the system.As an experimental demonstration,we simulated an IES coupled with an IEEE 39-node electrical grid system,a six-node heat network system,and a six-node gas network system.The simulation results confirm the effectiveness and feasibility of the proposed model.

Robust optimal dispatch strategy of integrated energy system considering CHP-P2G-CCS

Integrated energy systems(IESs)can improve energy efficiency and reduce carbon emissions,essential for achieving peak carbon emissions and carbon neutrality.This study investigated the characteristics of the CHP model considering P2G and carbon capture systems,and a two-stage robust optimization model of the electricity-heat-gascold integrated energy system was developed.First,a CHP model considering the P2G and carbon capture system was established,and the electric-thermal coupling characteristics and P2G capacity constraints of the model were derived,which proved that the model could weaken the electric-thermal coupling characteristics,increase the electric power regulation range,and reduce carbon emissions.Subsequently,a two-stage robust optimal scheduling model of an IES was constructed,in which the objective function in the day-ahead scheduling stage was to minimize the start-up and shutdown costs.The objective function in the real-time scheduling stage was to minimize the equipment operating costs,carbon emission costs,wind curtailment,and solar curtailment costs,considering multiple uncertainties.Finally,after the objective function is linearized with a ψ-piecewise method,the model is solved based on the C&CG algorithm.Simulation results show that the proposed model can effectively absorb renewable energy and reduce the total cost of the system.

Technical Perspective of Carbon Capture,Utilization,and Storage

Carbon dioxide(CO_(2))is the primary greenhouse gas contributing to anthropogenic climate change which is associated with human activities.The majority of CO_(2) emissions are results of the burning of fossil fuels for energy,as well as industrial processes such as steel and cement production.Carbon capture,utilization,and storage(CCUS)is a sustainable technology promising in terms of reducing CO_(2) emissions that would otherwise contribute to climate change.From this perspective,the discussion on carbon capture focuses on chemical absorption technology,primarily due to its commercialization potential.The CO_(2) absorptive capacity and absorption rate of various chemical solvents have been summarized.The carbon utilization focuses on electrochemical conversion routes converting CO_(2) into potentially valuable chemicals which have received particular attention in recent years.The Faradaic conversion efficiencies for various CO_(2) reduction products are used to describe efficiency improvements.For carbon storage,successful deployment relies on a better understanding of fluid mechanics,geomechanics,and reactive transport,which are discussed in details.

Progress and prospects of carbon dioxide capture,EOR-utilization and storage industrialization

Carbon dioxide capture,EOR-utilization and storage(CCUS-EOR)are the most practical and feasible large-scale carbon reduction technologies,and also the key technologies to greatly improve the recovery of low-permeability oil fields.This paper sorts out the main course of CCUS-EOR technological development abroad and its industrialization progress.The progress of CCUS-EOR technological research and field tests in China are summarized,the development status,problems and challenges of the entire industry chain of CO_(2) capture,transportation,oil displacement,and storage are analyzed.The results show a huge potential of the large-scale application of CCUS-EOR in China in terms of carbon emission reduction and oil production increase.At present,CCUS-EOR in China is in a critical stage of development,from field pilot tests to industrialization.Aiming at the feature of continental sedimentary oil and gas reservoirs in China,and giving full play to the advantages of the abundant reserves for CO_(2) flooding,huge underground storage space,surface infrastructure,and wide distribution of wellbore injection channels,by cooperating with carbon emission enterprises,critical technological research and demonstration project construction should be accelerated,including the capture of low-concentration CO_(2) at low-cost and on large-scale,supercritical CO_(2) long-distance transportation,greatly enhancing oil recovery and storage rate,and CO_(2) large-scale and safe storage.CCUS-EOR theoretical and technical standard system should be constructed for the whole industrial chain to support and promote the industrial scale application,leading the rapid and profitable development of CCUS-EOR emerging industrial chain with innovation.

Life-cycle Assessment of Carbon Dioxide Capture for Enhanced Oil Recovery

The development and deployment of Carbon dioxide Capture and Storage （CCS） technology is a cornerstone of the Norwegian government＇s climate strategy. A number of projects are currently evaluated/planned along the Norwegian West Coast, one at Tjeldbergodden. COe from this project will be utilized in part for enhanced oil recovery in the Halten oil field, in the Norwegian Sea. We study a potential design of such a system. A combined cycle power plant with a gross power output of 832 MW is combined with CO2 capture plant based on a post-combustion capture using amines as a solvent. The captured CO2 is used for enhanced oil recovery （EOR）. We employ a hybrid life-cycle assessment （LCA） method to assess the environmental impacts of the system. The study focuses on the modifications and operations of the platform during EOR. We allocate the impacts connected to the capture of CO2 to electricity production, and the impacts connected to the transport and storage of CO2 to the oil produced. Our study shows a substantial reduction of the greenhouse gas emissions from power production by 80% to 75 g·（kW·h）^-1. It also indicates a reduction of the emissions associated with oil production per unit oil produced, mostly due to the increased oil production. Reductions are especially significant if the additional power demand due to EOR leads to power supply from the land.

Remarkable carbon dioxide catalytic capture (CDCC) leading to solid-form carbon material via a new CVD integrated process (CVD-IP): An alternative route for CO_2 sequestration

Through our newly-developed ＂chemical vapor deposition integrated process （ISVD-IP）＇＂ using carbon OlOXlae （t..u2） as me raw matenal and only carbon source introduced, CO2 could be catalytically activated and converted to a new solid-form product, i.e., carbon nanotubes （CO2-derived） at a quite high yield （the single-pass carbon yield in the solid-form carbon-product produced from CO2 catalytic capture and conversion was more than 30% at a single-pass carbon-base）. For comparison, when only pure carbon dioxide was introduced using the conventional CVD method without integrated process, no solid-form carbon-material product could be formed. In the addition of saturated steam at room temperature in the feed for CVD, there were much more end-opening carbon nano-tubes produced, at a slightly higher carbon yield. These inspiring works opened a remarkable and alternative new approach for carbon dioxide catalytic capture to solid-form product, comparing with that of CO2 sequestration （CCS） or CO2 mineralization （solidification）, etc. As a result, there was much less body volume and almost no greenhouse effect for this solid-form carbon-material than those of primitive carbon dioxide.

Investigation of the role of Ca(OH)2 in the catalytic Alkaline Thermal Treatment of cellulose to produce H2 with integrated carbon capture

The Alkaline Thermal Treatment(ATT)of biomass is one of the few biomass conversion processes that has a potential for BECCS(bio-energy with carbon capture and storage).Combining in-situ carbon capture withcreates a carbon-neutral process that has the potential to be carbon-negative.This study has shown that the conversion of cellulose tosuppressedcan be achieved through the reforming of gaseous intermediates in a fixed bed of 10%Ni/ZrO2.Reforming occurs at low temperatures≤773 K,which could allow for improved sustainability.

The European Carbon dioxide Capture and Storage Laboratory Infrastructure(ECCSEL)

The transition to a non-emitting energy mix for power generation will take decades. This transition will need to be sustainable, e.g.economically affordable. Fossil fuels which are abundant have an important role to play in this respect, provided that Carbon Capture and Storage(CCS) is progressively implemented. CCS is the only way to reduce emissions from energy intensive industries.Thus, the need for upgraded and new CCS research facilities is widely recognised among stakeholders across Europe, as emphasised by the Zero Emissions Platform(ZEP) [1] and the European Energy Research Alliance on CCS(EERA-CCS) [2].The European Carbon Dioxide Capture and Storage Laboratory Infrastructure, ECCSEL, provides funders, operators and researchers with significant benefits by offering access to world-class research facilities that, in many cases, are unlikely for a single nation to support in isolation.This implies creation of synergy and the avoidance of duplication as well as streamlining of funding for research facilities.ECCSEL offers open access to its advanced laboratories for talented scientists and visiting researchers to conduct cutting-edge research.In the planning of ECCSEL, gap analyses were performed and CCS technologies have been reviewed to underpin and envisage the future experimental setup; 1) Making use of readily available facilities, 2) Modifying existing facilities, and 3) Planning and building entirely new advanced facilities.The investments required for the first ten years(2015-2025) are expected to be in the range of €80-120 miilion. These investments show the current level of ambition, as proposed during the preparatory phase(2011-2014).Entering the implementation phase in 2015, 9 European countries signed Letter of Intent(LoI) to join a ECCSEL legal entity: France, United Kingdom, Netherlands, Italy, Spain, Poland, Greece, Norway and Switzerland(active observer). As the EU ERIC-regulation [3] would offer the most suitable legal framework for ECCSEL, the host country, Norway, will apply for establishing ERIC as the ECCSEL Research Infrastructure(RI)legal entity in 2017. Until the ECCSEL ERIC is approved by the European Commission(probably by summer 2017), an interim MoU agreement for the implementation phase of ECCSEL RI has been signed by 13 research institutions and universities representing the 9 countries. A consortium of these partners were granted 3 million EURO from Horizon 2020 to boost implementation of ECCSEL from September 2015 and two years onwards.?2016, Institute of Process Engineering, Chinese Academy of Sciences. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co., Ltd. This is an open access article under the CC BY-NC-ND license(http://creativecommons.org/licenses/by-nc-nd/4.0/).

Progress and prospect of carbon dioxide capture, utilization and storage in CNPC oilfields

The development history of carbon capture,utilization and storage for enhanced oil recovery(CCUS-EOR)in China is comprehensively reviewed,which consists of three stages:research and exploration,field test and industrial application.The breakthrough understanding of CO_(2) flooding mechanism and field practice in recent years and the corresponding supporting technical achievements of CCUS-EOR project are systematically described.The future development prospects are also pointed out.After nearly 60 years of exploration,the theory of CO_(2) flooding and storage suitable for continental sedimentary reservoirs in China has been innovatively developed.It is suggested that C7–C15 are also important components affecting miscibility of CO_(2) and crude oil.The mechanism of rapid recovery of formation energy by CO_(2) and significant improvement of block productivity and recovery factor has been verified in field tests.The CCUS-EOR reservoir engineering design technology for continental sedimentary reservoir is established.The technology of reservoir engineering parameter design and well spacing optimization has been developed,which focuses on maintaining miscibility to improve oil displacement efficiency and uniform displacement to improve sweep efficiency.The technology of CO_(2) capture,injection and production process,whole-system anticorrosion,storage monitoring and other whole-process supporting technologies have been initially formed.In order to realize the efficient utilization and permanent storage of CO_(2),it is necessary to take the oil reservoir in the oil-water transition zone into consideration,realize the large-scale CO_(2) flooding and storage in the area from single reservoir to the overall structural control system.The oil reservoir in the oil-water transition zone is developed by stable gravity flooding of injecting CO_(2) from structural highs.The research on the storage technology such as the conversion of residual oil and CO_(2) into methane needs to be carried out.

Secondary Silicates as a Barrier to Carbon Capture and Storage in Deccan Basalt

Investigating the immobilization of CO2,previous basalt-water-CO2 interaction studies revealed the formation of carbonates over a short period,but with the extensive formation of secondary silicates(SS).The mechanisms involved in these processes remain unresolved,so the present study was undertaken to understand secondary mineral formation mechanisms.XRPD and Rietveld refinement data for neo-formed minerals show a drastic decrease in the Ca-O bond length,with the calcite structure degenerating after 80 h(hours).However,SEM images and EDS data revealed that a longer interaction time resulted in the formation of chlorite and smectite,adjacent to basalt grains which prevent basaltwater-CO2 interaction to form carbonates,thus restricting carbonate formation.As a result of this,the CO2 mineralization rate is initially high(till 80 h),but it later reduces drastically.It is evident that,for such temperature-controlled transformations,low temperature is conducive to minimizing SS surface coating at the time of mineral carbonation.

A review of in situ carbon mineralization in basalt

Global warming has greatly threatened the human living environment and carbon capture and storage(CCS)technology is recognized as a promising way to reduce carbon emissions.Mineral storage is considered a reliable option for long-term carbon storage.Basalt rich in alkaline earth elements facilitates rapid and permanent CO_(2) fixation as carbonates.However,the complex CO_(2)-fluid-basalt interaction poses challenges for assessing carbon storage potential.Under different reaction conditions,the carbonation products and carbonation rates vary.Carbon mineralization reactions also induce petrophysical and mechanical responses,which have potential risks for the long-term injectivity and the carbon storage safety in basalt reservoirs.In this paper,recent advances in carbon mineralization storage in basalt based on laboratory research are comprehensively reviewed.The assessment methods for carbon storage potential are introduced and the carbon trapping mechanisms are investigated with the identification of the controlling factors.Changes in pore structure,permeability and mechanical properties in both static reactions and reactive percolation experiments are also discussed.This study could provide insight into challenges as well as perspectives for future research.

Carbon Dioxide Capture Using Gas Hydrate Technology

According to IPCC （Intergovemmental Panel on Climate Change） Fourth Report, carbon dioxide emissions from the combustion of fossil fuels have been identified as the major contributor to global warming and climate change. One of the new approaches for capturing carbon dioxide and subsequently lowering the emissions is based on gas hydrate crystallization. Gas hydrates have a large capacity for the storage of gases which also resemble an attractive method for gas filtration. The basis of the separation is the selective partition of the target component between the hydrate phase and the gaseous phase. It is expected that carbon dioxide is preferentially encaged into the hydrate crystal phase compared to the other components. In the present paper, after a comparison of gas hydrates with existing capture technologies, a novel apparatus for gas hydrate production is illustrated and results of a first set of experimental applications of the reactor for CO2 hydrate formation and separation are presented. In particular, the effects of two different promoters were investigated. Results show that the reactor allows a good level of temperature control, resulting in rapid hydrate formation and mild operating conditions. Results are a basis for setting up a procedure for CO2 separation and capture.