INTERACTION MODELS FOR EFFECTIVE THERMAL AND ELECTRIC CONDUCTIVITIES OF CARBON NANOTUBE COMPOSITES

The present article provides supplementary information of previous works of analytic models for predicting conductivity enhancements of carbon nanotube composites. The models, though fairly simple, are able to take account of the effects of conductivity anisotropy, nonstraightness, and aspect ratio of the CNT additives on the conductivity enhancement of the composite and to give predictions agreeing well with existing experimental data. The omitted detailed derivation of this model is demonstrated in the present article with a more systematical analysis, which may help with further development in this direction. Furthermore, the effects of various orientation distributions of CNTs are reported here for the first time. The information may be useful in design or fabrication technology of CNT composites for better or specified conductivities.

Fabrication of aluminum matrix composite reinforced with carbon nanotubes

1.0wt.% carbon nanotube （CNT） reinforced 2024Al matrix composite was fabricated by cold isostatic press and subsequent hot extrusion techniques. The mechanical properties of the composite were measured by a tensile test. Mean-while,the fracture surfaces were examined using field emission scanning electron microscopy. The experimental results show that CNTs are dispersed homogeneously in the composite and that the interfaces of the Al matrix and the CNT bond well. Although the tensile strength and the Young’s modulus of the composite are enhanced markedly,the elongation does not decrease when compared with the matrix material fabricated under the same process. The reasons for the increments may be the extraordinary mechanical properties of CNTs,and the bridging and pulling-out role of CNTs in the Al matrix composite.

Aluminum matrix composites reinforced by molybdenum-coated carbon nanotubes

To extend the application of carbon nanotubes （CNTs） and explore novel aluminum matrix composites,CNTs were coated by molybdenum layers using metal organic chemical vapor deposition,and then Mo-coated CNT （Mo-CNT）/Al composites were prepared by the combination processes of powder mixing and spark plasma sintering.The influences of powder mixing and Mo-CNT content on the mechanical properties and electrical conductivity of the composites were investigated.The results show that magnetic stirring is better than mechanical milling for mixing the Mo-CNTs and Al powders.The electrical conductivity of the composites decreases with increasing Mo-CNT content.When the Mo-CNT content is 0.5wt%,the tensile strength and hardness of Mo-CNT/Al reach their maximum values.The tensile strength of 0.5wt% Mo-CNT/Al increases by 29.9%,while the electrical conductivity only decreases by 7.1%,relative to sintered pure Al.The phase analysis of Mo-CNT/Al composites reveals that there is no formation of Al carbide in the composites.

Stress and buckling analysis of a thick-walled micro sandwich panel with a flexible foam core and carbon nanotube reinforced composite (CNTRC) face sheets

In this paper,the stresses and buckling behaviors of a thick-walled mi-cro sandwich panel with a flexible foam core and carbon nanotube reinforced composite(CNTRC)face sheets are considered based on the high-order shear deformation theory(HSDT)and the modified couple stress theory(MCST).The governing equations of equi-librium are obtained based on the total potential energy principle.The effects of various parameters such as the aspect ratio,elastic foundation,temperature changes,and volume fraction of the canbon nanotubes(CNTs)on the critical buckling loads,normal stress,shear stress,and deflection of the thick-walled micro cylindrical sandwich panel consider-ing different distributions of CNTs are examined.The results are compared and validated with other studies,and showing an excellent compatibility.CNTs have become very use-ful and common candidates in sandwich structures,and they have been extensively used in many applications including nanotechnology,aerospace,and micro-structures.This paper also extends further applications of reinforced sandwich panels by providing the modified equations and formulae.

Mechanical, electrical, and thermal expansion properties of carbon nanotube-based silver and silver–palladium alloy composites

The mechanical, electrical, and thermal expansion properties of carbon nanotube（CNT）-based silver and silver–palladium（10：1, w/w） alloy nanocomposites are reported. To tailor the properties of silver, CNTs were incorporated into a silver matrix by a modified molecular level-mixing process. CNTs interact weakly with silver because of their non-reactive nature and lack of mutual solubility. Therefore, palladium was utilized as an alloying element to improve interfacial adhesion. Comparative microstructural characterizations and property evaluations of the nanocomposites were performed. The structural characterizations revealed that decorated type-CNTs were dispersed, embedded, and anchored into the silver matrix. The experimental results indicated that the modification of the silver and silver–palladium nanocomposite with CNT resulted in increases in the hardness and Young＇s modulus along with concomitant decreases in the electrical conductivity and the coefficient of thermal expansion（CTE）. The hardness and Young＇s modulus of the nanocomposites were increased by 30%？40% whereas the CTE was decreased to 50%-60% of the CTE of silver. The significantly improved CTE and the mechanical properties of the CNT-reinforced silver and silver–palladium nanocomposites are correlated with the intriguing properties of CNTs and with good interfacial adhesion between the CNTs and silver as a result of the fabrication process and the contact action of palladium as an alloying element.

Chemical, mechanical, and thermal expansion properties of a carbon nanotube-reinforced aluminum nanocomposite

In the present study,the chemical and mechanical properties and the thermal expansion of a carbon nanotube（CNT）-based crystalline nano-aluminum（nano Al） composite were reported.The properties of nanocomposites were tailored by incorporating CNTs into the nano Al matrix using a physical mixing method.The elastic moduli and the coefficient of thermal expansion（CTE） of the nanocomposites were also estimated to understand the effects of CNT reinforcement in the Al matrix.Microstructural characterization of the nanocomposite reveals that the CNTs are dispersed and embedded in the Al matrix.The experimental results indicate that the incorporation of CNTs into the nano Al matrix results in the increase in hardness and elastic modulus along with a concomitant decrease in the coefficient of thermal expansion The hardness and elastic modulus of the nanocomposite increase by 21%and 20%,respectively,upon CNT addition.The CTE of CNT/A1 nanocomposite decreases to 70%compared with that of nano Al.

Synthesis, Characterization and Gas Sensing Properties of Graphene Oxide-Multiwalled Carbon Nanotube Composite

Graphene oxide （GO）-multiwalled carbon nanotube （MWCNT） composite was synthesized and characterized by X-ray diffraction, atomic force microscopy, scanning electron microscopy, micro Raman, Fourier transform infrared and ultraviolet-visible near infrared spectroscopy techniques. Spectral characteris- tics of cladding modified fiber optic gas sensors were studied for various concentrations of ammonia, ethanol and methanol at 27 ℃. Thickness of the gas sensing layer was controlled by varying the concentration of composite in ethanol medium （0.5 and 1 mg/mL） for three times dipping process. The O.S mg/ mL concentrated GO-MWCNT coated sensor showed 1.20, 1.40 and 1.15 times higher sensitivity than the GO coated sensor for ammonia, ethanol and methanol vapors, respectively. Furthermore, it exhibited 1.50, 1.80 and 1.80 times better sensitivity than 1 mg/mL concentrated GO-MWCNT coated sensor for ammonia, ethanol and methanol vapors, respectively. The presence of functional groups in GO increased the sen- sitivity. This is mainly attributed to the effective electron charge transfer between the composite materials and analytes.

Microwave Absorption Properties of Polyester Composites Incorporated with Heterostructure Nanofillers with Carbon Nanotubes as Carriers

Carbonaceous nanomaterials such as carbon nanotubes （CNTs）, magnetic metal nanomaterials and semicon- ductor nanomaterials are superior candidates for microwave absorbers. Taking full advantage of the features of CNTs, nanophase cobalt and nanophase zinc oxide, whose main microwave absorption mechanisms are based on resistance loss, magnetic loss and dielectric loss, we fabricate CNT/Co and CNT/ZnO heterostructure nanocom- posites, respectively. By using the CNTs, CNT/Co nanocomposites and CNT/ZnO nanocomposites as nanofillers, composites with polyester as matrix are prepared by in situ polymerization, and their microwave absorption per- formance is studied. It is indicated that the synergetic effects of the physic properties of different components in nano-heterostructures result in greatly enhanced microwave absorption performance in a wide frequency range. The absorption peak is increased, the absorption bandwidth is broadened, and the maximum peak shifts to a lower frequency.

Nonlinear stability of advanced sandwich cylindrical shells comprising porous functionally graded material and carbon nanotube reinforced composite layers under elevated temperature

The nonlinear stability of sandwich cylindrical shells comprising porous functionally graded material(FGM) and carbon nanotube reinforced composite(CNTRC)layers subjected to uniform temperature rise is investigated. Two sandwich models corresponding to CNTRC and FGM face sheets are proposed. Carbon nanotubes(CNTs) in the CNTRC layer are embedded into a matrix according to functionally graded distributions. The effects of porosity in the FGM and the temperature dependence of properties of all constituent materials are considered. The effective properties of the porous FGM and CNTRC are determined by using the modified and extended versions of a linear mixture rule, respectively. The basic equations governing the stability problem of thin sandwich cylindrical shells are established within the framework of the Donnell shell theory including the von K’arm’an-Donnell nonlinearity. These equations are solved by using the multi-term analytical solutions and the Galerkin method for simply supported shells.The critical buckling temperatures and postbuckling paths are determined through an iteration procedure. The study reveals that the sandwich shell model with a CNTRC core layer and relatively thin porous FGM face sheets can have the best capacity of thermal load carrying. In addition, unlike the cases of mechanical loads, porosities have beneficial effects on the nonlinear stability of sandwich shells under the thermal load. It is suggested that an appropriate combination of advantages of FGM and CNTRC can result in optimal efficiency for advanced sandwich structures.

Effects of Carbon Nanotubes by Electrophoretic Deposition on Interlaminar Properties of Two Dimensional Carbon/carbon Composites

Carbon nanotubes（CNTs） were deposited uniformly on carbon cloth by electrophoretic deposition（EPD）. Thereafter, CNT-doped clothes were stacked and densified by pyrocarbon via chemical vapor infiltration to fabricate two-dimensional（2 D） carbon/carbon（C/C） composites. Effects of EPD CNTs on interlaminar shear performance and mode Ⅱ interlaminar fracture toughness（GⅡc） of 2 D C/C composites were investigated. Results showed that EPD CNTs were uniformly covered on carbon fibers, acting as a porous coating. Such a CNT coating can obviously enhance the interlaminar shear strength and GⅡc of 2 D C/C composites. With increaing EPD CNTs, the interlaminar shear strength and GⅡc of 2 D C/C composites increase greatly and then decrease, both of which run up to their maximum values, i e, 13.6 MPa and 436.0 J·m-2, when the content of EPD CNTs is 0.54 wt%, 2.27 and 1.45 times of the baseline. Such improvements in interlaminar performance of 2 D C/C composites are mainly beneficial from their increased cohesion of interlaminar matrix, which is caused not only by the direct reinforcing effect of EPD CNT network but also by the capacity of EPD CNTs to refine pyrocarbon matrix and induce multilayered microstructures that greatly increase the crack propagation resistance through ＂crack-blocking and-deflecting mechanisms＂.

Effect of Surfactant Stabilizers on the Distribution of Carbon Nanotubes in Aqueous Media

The results of a study on the homogeneity of suspensions are described considering the effect of different types of surfactant stabilizers and their concentrations on the uniform distribution of a carbon nanotubes（CNTs）-based modifying additive to construction materials in an aqueous medium. This problem was solved herein by using surfactants and ultrasound. The sonication treatment of CNTs particle agglomerates allowed for dispersing their globules and achieving a 15-20-fold decrease in their average size, for which it became possible to make better use of the CNTs as cement modifier. As a result of the experimental studies carried out, the effect of the surfactant type and concentration promoting uniform distribution of the CNTs in the bulk of the suspension and, correspondingly, in the structural composite matrix was revealed. The CNTs-based additive improved the physical-mechanical and operational characteristics of the material.

Preparation and thermal properties of layered porous carbon nanotube/epoxy resin composite films

A floating-catalyst spray pyrolysis method was used to synthesize carbon nanotube(CNT)thin films.With the use of ammonium chloride as a pore-former and epoxy resin(EP)as an adhesive,CNT/EP composite films with a porous structure were prepared through the post-heat treatment.These films have excellent thermal insulation(0.029–0.048 W·m^−1·K^−1)at the thickness direction as well as a good thermal conductivity(40–60 Wm^−1·K^−1)in the film plane.This study provides a new film material for thermal control systems that demand a good thermal conductivity in the plane but outstanding thermal insulation at the thickness direction.

Electrochemical detection and degradation of ibuprofen from water on multi-walled carbon nanotubes-epoxy composite electrode

This work describes the electrochemical behaviour of ibuprofen on two types of multi-walled carbon nanotubes based composite electrodes, i.e., multi-walled carbon nanotubes-epoxy （MWCNT） and silver-modified zeolite-multi-wailed carbon nanotubes-epoxy （AgZMWCNT） composites electrodes. The composite electrodes were obtained using two-roll mill procedure. SEM images of surfaces of the composites revealed a homogeneous distribution of the composite components within the epoxy matrix. AgZMWCNT composite electrode exhibited the better electrical conductivity and larger electroactive surface area. The electrochemical determination of ibuprofen （IBP） was achieved using AgZMWCNT by cyclic voltammetry, differential-pulsed voltammetry, square-wave voltammetry and chronoamperometry. The IBP degradation occurred on both composite electrodes under controlled electrolysis at 1.2 and 1.75 V vs. Ag/AgCl, and IBP concentration was determined comparatively by differential-pulsed voltammetry, under optimized conditions using AgZMWCNT electrode and UV-Vis spectrophotometry methods to determine the IBP degradation performance for each electrode. AgZMWCNT electrode exhibited a dual character allowing a double application in IBP degradation process and its control.

An Analytical Approach for Nonlinear Buckling Analysis of Torsionally Loaded Sandwich Carbon Nanotube Reinforced Cylindrical Shells with Auxetic Core

The main aim of this paper is to present an analytical approach on the postbuckling for torsionally loaded sandwich carbon nanotube(CNT)reinforced cylindrical shells with the auxetic core.The considered shells consist of three layers,external and internal CNT reinforced layers,and the auxetic lattice core made by isotropic material.The homogenization model for honeycomb auxetic lattice core is utilized,and the equilibrium equations are formulated based on the nonlinear Donnell’s thin shell theory with von Karman geometrical nonlinearities.The three terms of deflection are considered,the Airy’s stress function and Galerkin’s method are utilized,the explicit expression of critical buckling of torsionally loaded shells and load-deflection expression of postbuckling states are achieved.The effects of two carbon nanotube reinforced layers,the auxetic core layer,the volume fraction of carbon nanotube on the torsional buckling behavior are examined and remarked.

A Novel Multiscale Reinforcement by In-Situ Growing Carbon Nanotubes on Graphene Oxide Grafted Carbon Fibers and Its Reinforced Carbon/Carbon Composites with Improved Tensile Properties

In-situ growing carbon nanotubes （CNTs） directly on carbon fibers （CFs） always lead to a degraded tensile strength of CFs and then a poor fiber-dominated mechanical property of carbon/carbon composites （C/ Cs）. To solve this issue, here, a novel carbon fiber-based multiscale reinforcement is reported. To synthesize it, carbon fibers （CFs） have been first grafted by graphene oxide （GO）, and then carbon nanotubes （CNTs） have been in-situ grown on GO-grafted CFs by catalytic chemical vapor deposition. Characterizations on this novel reinforcement show that GO grafting cannot only nondestructively improve the surface chemical activity of CFs but also protect CFs against the high-temperature corrosion of metal catalyst during CNT growth, which maintains their tensile properties. Tensile property tests for unidirectional C/Cs with different preforms show that this novel reinforcement can endow C/C with improved tensile properties, 32% and 87% higher than that of pure C/C and C/C only doped with in-situ grown CNTs. This work would open up a possibility to fabricate multiscale C/Cs with excellent global performance.

Template-Free Synthesis of Ordered Mesoporous NiO/Poly (Sodium-4-Styrene Sulfonate) Functionalized Carbon Nanotubes Composite for Electrochemical Capacitors

We report the first example of a practical and efficient template-free strategy for synthesizing ordered mesoporous NiO/poly(sodium-4-styrene sulfonate)(PSS)functionalized carbon nanotubes(FCNTs)composites by calcining a Ni(OH)_(2)/FCNTs precursor prepared by refl uxing an alkaline solution of Ni(NH_(3))x^(2)+and FCNTs at 97 oC for 1 h.The morphology and structure were characterized by X-ray diffraction,scanning electron microscopy,and transmission electron microscopy.Thermal decomposition of the precursor results in the formation of ordered mesoporous NiO/FCNTs composite(ca.48 wt%NiO)with large specifi c surface area.Due to its enhanced electronic conductivity and hierarchical(meso-and macro-)porosity,composite simultaneously meets the three requirements for energy storage in electrochemical capacitors at high rate,namely,good electron conductivity,highly accessibleelectrochemical surface areas owing to the existence of mesopores,and efficient mass transport from the macropores.Electrochemical data demonstrated that the ordered mesoporous NiO/FCNTs composite is capable of delivering a specifi c capacitance(SC)of 526 F/g at 1 A/g and a SC of 439 F/g even at 6 A/g,and show a degradation of only ca.6%in SC after 2000 continuous charge/discharge cycles.

Carbon nanotubes/TiO_2 nanotubes composite photocatalysts for efficient degradation of methyl orange dye

A series of carbon nanotubes/TiO2 nanotubes （CNTs/TNTs） composite photocatalysts were successfully prepared by incorporation of CNTs in HNO3 washing process. These photocatalysts were characterized by XRD, N2 physical adsorption, UV-vis diffuse reflectance spectroscopy, TEM and Raman spectroscopy, respectively, and their photocatalytic activities were tested by using methyl orange （MO） as a model compound. Also, the effects of amount of CNTs incorporated, calcination temperature and amount of catalyst on the photocatalytic activity of the composite photocatalyst were systematically investigated. The results show that the CNTs/TNTs composite exhibits much higher photocatalytic activity than that of the TNTs or CNTs alone.

A Novel Melt Processing for Mg Matrix Composites Reinforced by Multiwalled Carbon Nanotubes

Carbon nanotubes（CNTs） reinforced Mg matrix composites were fabricated by a novel melt processing.The novel processing consisted of two courses：CNTs pre-dispersion and ultrasonic melt processing.Mechanical ball-milling was employed to pre-disperse CNTs on Zinc（Zn） flakes.Serious CNT entanglements were well dispersed to single CNT or tiny clusters on Zn flakes.The ultrasonic melt processing further dispersed CNTs in the Mg melt,especially tiny CNT clusters.Thus,a uniform dispersion of CNTs was achieved in the as-cast composites.Hot extrusion further improved the distribution of CNTs.CNTs increased both the strength and elongation of the matrix alloy.Notably,the elongation of the matrix alloy was enhanced by 40%.Grain refinement and the pulling-out of CNTs resulted in the evident improvement of ductility for the composites.

Solar photocatalytic decomposition of two azo dyes on multiwalled carbon nanotubes(MWCNTs)/TiO_(2)composites

Multi-walled carbon nanotubes(MWCNTs)/TiO_(2)composite photocatalysts with high photoactivity were prepared by sol-gel process and further characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),Fourier transform infrared(FT-IR),and UV-vis absorption spectra.Compared to pure TiO_(2),the combination of MWCNTs with titania could cause a significant absorption shift toward the visible region.The photocatalytic performances of the MWCNTs/TiO_(2)composite catalysts were evaluated for the decomposition of Reactive light yellow K-6G(K-6G)and Mordant black 7(MB 7)azo dyes solution under solar light irradiation.The results showed that the addition of MWCNTs enhanced the adsorption and photocatalytic activity of TiO_(2)for the degradation of azo dyes K-6G and MB 7.The effect of MWCNTs content,catalyst dosage,pH,and initial dye concentration were examined as operational parameters.The kinetics of photocatalytic degradation of two dyes was found to follow a pseudo-first-order rate law.The photocatalyst was used for seven cycles with photocatalytic degradation efficiency still higher than 98%.A plausible mechanism is also proposed and discussed on the basis of experimental results.

Molecular and crystal assembly inside the carbon nanotube:encapsulation and manufacturing approaches

Encapsulation of different guestspecies such as molecules and ions inside carbon nanotubes （CNTs） has been reported in the literatures during the last 15 years and repre sents an exciting development of nanoengineering of novel materials and composites. The reported nanocomposite mate rials show the semiconducting properties with potential applications in nanosensors, nanounits and nanocircuits as well as advanced energy transfer and storage properties, and encompass manufacturing for novel nanowires, nanoelectronic devices with properties designed with optoelectronic, spin tronic and nanomagnetic qualities. This review reports on a wide range of encapsulation references with particular focus on single molecules, atomic chains, metal halides and polymers encapsulated inside CNTs. The encapsulation methods and the chemical and physical qualities of these novel materials are crucial for the future manufacturing of novel innovations in nanotechnology, and represent therefore the current stateof theart of encapsulation methods in advanced manufacturing.