Research status of carbonaceous matter in carbonaceous gold ores and bio-oxidation pretreatment

Carbonaceous gold mines are important refractory gold ores. The previous results demonstrate that the carbonaceous matter is mainly composed of elemental carbon, organic acid and hydrocarbons. The dissolved aurocyanide complex is robbed by adsorption of carbonaceous matter, which is similar to activated carbon in cyanide leaching of gold. The pretreatment methods of carbonaceous gold ores were introduced, including high temperature roasting, bio-oxidation, chemical oxidation, competitive adsorption, barrier inhibition and microwave roasting. Recently, bio-oxidation was developed rapidly due to its advantages such as mild conditions, simple processes, low energy consumption and friendly environment. The known microorganisms related with bio-oxidation pretreatment mainly are chemolithotroph bacteria such as Thiobacillus ferrooxidans, Thiobacillus thiooxidans and Leptospirillum ferrooxidans. The researches on decomposing and passivating carbonaceous matter were commenced by Phanerochaete chrysosporium, Pseudomonadaceae and Streptomyces setonii. Finally, the main problems were analyzed and the application prospect of this technique was looked forward.

Chemical Composition of PM_(2.5) at an Urban Site of Chengdu in Southwestern China

PM2.5 aerosols were sampled in urban Chengdu from April 2009 to January 2010, and their chemical compositions were characterized in detail for elements, water soluble inorganic ions, and carbonaceous mat- ter. The annual average of PM2.5 was 165 btg m a, which is generally higher than measurements in other Chinese cities, suggesting serious particulate pollution issues in the city. Water soluble ions contributed 43.5% to the annual total PM2.5 mass, carbonaceous aerosols including elemental carbon and organic car- bon contributed 32.0%, and trace elements contributed 13.8~0. Distinct daily and seasonal variations were observed in the mass concentrations of PM2.5 and its components, reflecting the seasonal variations of dif- ferent anthropogenic and natural sources. Weakly acidic to neutral particles were found for PMz5. Major sources of PM2.u identified from source apportionment analysis included coal combustion, traffic exhaust, biomass burning, soil dust, and construction dust emissions. The low nitrate： sulfate ratio suggested that stationary emissions were more important than vehicle emissions. The reconstructed masses of ammonium sulfate, ammonium nitrate, particulate carbonaceous matter, and fine soil accounted for 79% of the total measured PM2.5 mass; they also accounted for 92% of the total measured particle scattering.

Differences of cyanide leaching between calcine and dust from refractory gold concentrates

Differences of cyanide leaching between the calcine and the dust from a refractory gold concentrate were investigated by comparative method. Results showed that gold leaching efficiencies of the calcine and the dust were 85.31% and 54.30%, respectively, with direct cyanidation. Contents and existing forms of arsenic and carbon were the main reasons for those differences. The maximum gold leaching efficiencies of the calcine and the dust were 87.70% and 58.60%, respectively, with cyanidation after NaOH pre-leaching. Harmful elements removal, gold loss in NaOH pre-leaching and iron oxides hindrance codetermined gold leaching efficiencies of the calcine and the dust. After H2SO4 pre-leaching, the maximum gold leaching efficiencies of the calcine and the dust achieved 94.96% and 80.40%, respectively. The effect of carbonaceous matter was the main reason for differences for leaching efficiencies of the calcine and the dust. Based on those differences, two proper gold extraction processes were put forward, and gold leaching efficiencies for the calcine and the dust achieved 94.91% and 91.90%, respectively.

Carbonaceous matter in glacier at the headwaters of the Yangtze River:Concentration,sources and fractionation during the melting process

Carbonaceous matter has an important impact on glacial retreat in the Tibetan Plateau,further affecting the water resource supply.However,the related studies on carbonaceous matter are still scarce in Geladaindong(GLDD)region,the source of the Yangtze River.Therefore,the concentration,source and variations of carbonaceous matter at Ganglongjiama(GLJM)glacier in GLDD region were investigated during the melting period in 2017,which could deepen our understanding on carbonaceous matter contribution to glacier melting.The results showed that dissolved organic carbon(DOC)concentration of snowpit samples(283±200μg/L)was much lower than that of precipitation samples(624±361μg/L),indicating that large parts of DOC could be rapidly leached from the snowpit during the melting process.In contrast,refractory black carbon(rBC)concentration measured by Single Particle Soot Photometer of snowpit samples(4.27±3.15μg/L)was much higher than that of precipitation samples(0.97±0.49μg/L).Similarly,DOC with high mass absorption cross-section measured at 365 nm value was also likely to enrich in snowpit during the melting process.In addition,it was found that both r BC and DOC with high light-absorbing ability began to leach from the snowpit when melting process became stronger.Therefore,rBC and DOC with high light-absorbing ability exhibited similar behavior during the melting process.Based on relationship among DOC,rBC and K^+ in precipitation,the main source of carbonaceous matter in GLJM glacier was biomass burning during the study period.

Reactivity of Pyrogenic Carbonaceous Matter (PCM) in mediating environmental reactions: Current knowledge and future trends

Pyrogenic Carbonaceous Matter(PCM;e.g.,black carbon,biochar,and activated carbon)are solid residues from incomplete combustion of fussil fuel or biomass.They are traditionally viewed as inert adsorbents for sequestering contaminants from the aqueous phase or providing surfaces for microbes to grow.In this account,we reviewed the recently discovered reactivity of PCM in promoting both chemical and microbial synergies that are important in pollutant transformation,biogeochemical processes of redox-active elements,and climate change mitigation with respect to the interaction between biochar and nitrous oxide(N2O).Moreover,we focused on our group's work in the PCM-enhanced abiotic transformation of nitrogenous and halogenated pollutants and conducted in-depth analysis of the reaction pathways.To understand what properties of PCM confer its reactivity,our group pioneered the use of PCM-like polymers,namely conjugated microporous polymers(CMPs),to mimic the performance of PCM.This approach allows for the controlled incorporation of specific surface properties(e.g.,quinones)into the polymer network during the polymer synthesis.As a result,the relationship between specific characteristics of PCM and its reactivity in facilitating the decay of a model pollutant was systematically studied in our group's work.The findings summarized in this account help us to better understand an overlooked environmental process where PCM synergistically interacts with various environmental reagents such as hydrogen sulfide and water.Moreover,the knowledge gained in these studies could inform the design of a new generation of reactive carbonaceous materials with tailored properties that are highly efficient in contaminant removal.

Influence of fuel moisture, charge size, feeding rate and air ventilation conditions on the emissions of PM, OC, EC, parent PAHs, and their derivatives from residential wood combustion

Controlled combustion experiments were conducted to investigate the influence of fuel charge size, moisture, air ventilation and feeding rate on the emission factors （EFs） of carbonaceous particulate matter, parent polycyclic aromatic hydrocarbons （pPAHs） and their derivatives from residential wood combustion in a typical brick cooking stove. Measured EFs were found to be independent of fuel charge size, but increased with increasing fuel moisture. Pollution emissions from the normal burning under an adequate air supply condition were the lowest for most pollutants, while more pollutants were emitted when an oxygen deficient atmosphere was formed in the stove chamber during fast burning. The impacts of these factors on the size distribution of emitted particles was also studied. Modified combustion efficiency and the four investigated factors explained 68%, 72%, and 64% of total variations in EFs of PM, organic carbon, and oxygenated PAHs, respectively, but only 36%, 38% and 42% of the total variations in EFs of elemental carbon, pPAHs and nitro-PAHs, respectively.