CARBONIZED FIBROUS RESIN AS A NEW SORBENT FOR SAMPLING POLYCYCLIC AROMATIC HYDROCARBONS (PAHS) IN AMBIENT AIR

A new sampling method of ambient air analysis using carbonized fibrous resin as a sorbent for polycyclic aromatic hydrocarbons (PAHs) was reported. The physical and chemical properties of the carbonized fibrous resins were measured. The sample pretreatment with ultrasonic extraction and subsequent clean-up elution through a silica gel column was optimized. The suitable ultrasonic extraction conditions were selected as follows: resin weight was 1.5 g, ultrasonic extraction time 20 min, volume of extraction solvent 100 ml and extraction operation times 2~3. The concentrated extractable organic matter was submitted to next step of clean-up procedure of adsorption chromatography on silica gel column/n-hexane and a mixture of dichloromethene:n-hexane solution 2:3 (v/v). The PAHs fractions in the real samples from Changzhou, China were particularly analyzed using GC-MS data system and the data of mass spectra, retention times and scan numbers of the real samples were compared with that of the standards of 16 PAHs listed by the US EPA as 損riority pollutants?of the environment. The analysis of the real samples indicates that the carbonized fibrous resin is a good sorbent. The pretreatment of samples of ambient air with carbonized fibrous resin as a sorbent for PAHs is proved to be reliable and might be used for the procedure of the determination of PAHs in atmospheric environment.

Determination of Water Diffusion Coefficients and Dynamics in Adhesive/Carbon Fiber Reinforced Epoxy Resin Composite Joints

To determinate the water diffusion coefficients and dynamics in adhesive/carben fiber reinforced epoxy resin composite joints, energy dispersive X-ray spectroscopy analysis（EDX） is used to establish the content change of oxy- gen in the adhesive in adhesive/carbon fther reinforced epoxy resin composite joints. As water is made up of oxygen and hydrogen, the water diffusion coefficients and dynamics in adhesive/carben fiber reinforced epoxy resin composite joints can be obtained from the change in the content of oxygen in the adhesive during humidity aging, via EDX analy-sis. The authors have calculated the water diffusion coefficients and dynamics in the adhesive/carbon fiber reinforced epoxy resin composite joints with the aid of beth energy dispersive X-ray spectroscopy and elemental analysis. The de- termined results with EDX analysis are almost the same as those determined with elemental analysis and the results al- so show that the durability of the adhesive/carbon fther reinforced epoxy resin composite joints subjected to silane cou- pling agent treatment is better than those subjected to sand paper burnishing treatment and chemical oxidation treat- ment.

Synergistic regulation of current-carrying wear performance of resin matrix carbon brush composites with tungsten copper composite powder

Resin matrix carbon brush composites(RMCBCs)are critical materials for high-powered electric tools.However,effectively improving their wear resistance and heat dissipation remains a challenge.RMCBCs prepared with flake graphite powders that were evenly loaded with tungsten copper composite powder(RMCBCs-W@Cu)exhibited a low wear rate of 1.63 mm^(3)/h,exhibiting 48.6%reduction in the wear rate relative to RCMBCs without additives(RMCBCs-0).In addition,RMCBCs-W@Cu achieved a low friction coefficient of 0.243 and low electric spark grade.These findings indicate that tungsten copper composite powders provide particle reinforcement and generate a gradation effect for the epoxy resin(i.e.,connecting phase)in RMCBCs,which weakens the wear of RMCBCs caused by fatigue under a cyclic current-carrying wear.

Effective dielectric attenuation for excellent microwave absorption with broadband response of carbon hollow microspheres derived from resin

Carbon hollow microspheres as microwave absorption materials(MAMs)are of great significance in the research focuses owing to their lightweight,good impedance matching,and modifiable dielectric proper-ties.However,it is still a huge challenge to distinguish the contribution of dielectric attenuation between carbon intrinsic feature and hollow structure due to the lack of appropriate model materials.Then,the inadequate analysis of effective dielectric attenuation resulted in the construction of carbon hollow mi-crospheres semiempirical and often lacked precise modification of microstructure.Herein,a series of car-bon hollow microspheres with controllable graphitization and thickness of shell derived from phenolic resin coated on polystyrene microspheres that fully decomposed were synthesized,which is free of the impact of template residue.The carbon fragments ground from hollow microspheres exhibit the same broadband response as hollow microspheres,with effective bandwidth(RL<-10 dB)of 7.6 GHz,while their electromagnetic wave loss mechanisms are distinct.The high dielectric loss of carbon fragments with the same intrinsic characteristics as carbon hollow microspheres is mainly caused by dipole po-larization relaxation and enhancement of electrical conductivity ascribed to overlapping between carbon sheets.For the hollow structure,in addition to dipole polarization relaxation attributed to carbon intrin-sic feature,the effective dielectric loss is also comprised of the interfacial polarization in advantage due to the effective heterogeneous interface between air and carbon shell.This work provides a simplified model to clarify the effect of carbon intrinsic feature and microstructure on the dielectric loss of carbon hollow microspheres.

基于激光热弹效应的碳纤维增强树脂复合材料缺陷检测机理研究

碳纤维增强树脂基复合材料(carbon fiber reinforced resin polymer, CFRP)在周期载荷作用下产生的基体裂纹、纤维断裂等微损伤的累积会严重影响CFRP的力学性能,微损伤尺寸较小且位置分散,传统的无损检测方法难以准确识别。激光超声检测技术具有非接触、检测速度快、测量范围广等优点,特别是结合激光的远距离激励和大角度入射的优势,在大尺寸、曲面形式结构材料的损伤检测方面有巨大的潜力。本文基于激光热弹效应,在分析激光作用到CFRP后的温度、应力和位移场分布的基础上,对CFRP内部超声波的产生过程和传播特性进行了系统研究。并通过对CFRP中不同处存在缺陷时的超声波回波信号的分析比较,得到缺陷位置与回波信号特性之间的对应关系,从而实现从回波信号特征反演出CFRP中缺陷位置的关键信息。

Removal of perfluorinated surfactants from wastewater by adsorption and ion exchange--Influence of material properties,sorption mechanism and modeling

Perfluorooctane sulfonate（PFOS） has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the adsorptive elimination of PFOS from wastewater by activated carbons, polymer adsorbents and anion exchange resins was investigated with regard to their isotherms and kinetics. The batch and column tests were combined with physicochemical characterization methods, e.g., N2 physisorption, mercury porosimetry, infrared spectroscopy, differential scanning calorimetry, titrations, as well as modeling. Sorption kinetics was successfully modelled applying the linear driving force（LDF） approach for surface diffusion after introducing a load dependency of the mass transfer coefficient βs.The big difference in the initial mass transfer coefficient βs,0, when non-functionalized adsorbents and ion-exchange resins are compared, suggests that the presence of functional groups impedes the intraparticle mass transport. The more functional groups a resin possesses and the longer the alkyl moieties are the bigger is the decrease in sorption rate.But the selectivity for PFOS sorption is increasing when the character of the functional groups becomes more hydrophobic. Accordingly, ion exchange and hydrophobic interaction were found to be involved in the sorption processes on resins, while PFOS is only physisorptively bound to activated carbons and polymer adsorbents. In agreement with the different adsorption mechanisms, resins possess higher total sorption capacities than adsorbents. Hence, the latter ones are rendered more effective in PFOS elimination at concentrations in the low μg/L range, due to a less pronounced convex curvature of the sorption isotherm in this concentration range.

Synergetic Improvement of Interlaminar Fracture Toughness in Carbon Fiber/Epoxy Composites Interleaved with PES/PEK‑C Hybrid Nanofiber Veils

In this study,two types of soluble thermoplastic resins were added to epoxy resin at a fixed weight ratio to prepare a three-phase cast body.The cast was then manufactured into hybrid nanofiber as interleaves for interlaminar toughening of carbon fiber/epoxy resin(CF/EP)composites using a co-solvent method.The results revealed that when the hybrid components reached 15 wt%,Polyethersulfone(PES)and polyaryletherketone cardo(PEK-C)exhibited the best synergistic toughening effect,and the fracture toughness increased by 99.8%and 39.8%,respectively,compared with the reference or the same proportion of the single PES toughened sample.We used PES/PEK-C hybrid nanofibers with an areal density of 19.2 g per square meter(gsm)as composite toughening layers.Apart from the lack of significant influence of PES nanofiber on CF/EP composites,the interlaminar fracture toughness of mode I and mode II layers increased by 88.3%and 46.9%,respectively,compared to the reference sample.Scanning Electron Microscopy of the fracture surface and cross-section micromorphology of the laminate displayed that the thermoplastic microspheres of different sizes contribute differently to crack resistance:PEK-C consumes more energy due to the debonding and extraction of microspheres and resin,whereas the presence of the PES phase can induce more plastic deformation and crack deflection.

Comparison of different combined treatment processes to address the source water with high concentration of natural organic matter during snowmelt period

The source water in one forest region of the Northeast China had very high natural organic matter（NOM） concentration and heavy color during snowmelt period. The efficiency of five combined treatment processes was compared to address the high concentration of NOM and the mechanisms were also analyzed. Conventional treatment can hardly remove dissolved organic carbon（DOC） in the source water. KMn O4pre-oxidization could improve the DOC removal to 22.0%. Post activated carbon adsorption improved the DOC removal of conventional treatment to 28.8%. The non-sufficient NOM removal could be attributed to the dominance of large molecular weight organic matters in raw water, which cannot be adsorbed by the micropore upon activated carbon. O3＋ activated carbon treatment are another available technology for eliminating the color and UV254 in water. However, its performance of DOC removal was only 36.4%, which could not satisfy the requirement for organic matter. The limited ozone dosage is not sufficient to mineralize the high concentration of NOM. Magnetic ion-exchange resin combined with conventional treatment could remove 96.2%of color, 96.0% of UV254 and 87.1% of DOC, enabling effluents to meet the drinking water quality standard. The high removal efficiency could be explained by the negative charge on the surface of NOM which benefits the static adsorption of NOM on the anion exchange resin. The results indicated that magnetic ion-exchange resin combined with conventional treatment is the best available technology to remove high concentration of NOM.