Enabling heterogeneous catalysis to achieve carbon neutrality: Directional catalytic conversion of CO_(2) into carboxylic acids

The increase in anthropogenic carbon dioxide(CO_(2))emissions has exacerbated the deterioration of the global environment,which should be controlled to achieve carbon neutrality.Central to the core goal of achieving carbon neutrality is the utilization of CO_(2) under economic and sustainable conditions.Recently,the strong need for carbon neutrality has led to a proliferation of studies on the direct conversion of CO_(2) into carboxylic acids,which can effectively alleviate CO_(2) emissions and create high-value chemicals.The purpose of this review is to present the application prospects of carboxylic acids and the basic principles of CO_(2) conversion into carboxylic acids through photo-,electric-,and thermal catalysis.Special attention is focused on the regulation strategy of the activity of abundant catalysts at the molecular level,inspiring the preparation of high-performance catalysts.In addition,theoretical calculations,advanced technologies,and numerous typical examples are introduced to elaborate on the corresponding process and influencing factors of catalytic activity.Finally,challenges and prospects are provided for the future development of this field.It is hoped that this review will contribute to a deeper understanding of the conversion of CO_(2) into carboxylic acids and inspire more innovative breakthroughs.

Using Electrodeposition of Carboxylated Chitosan for Green Preparation of Copper Nanoclusters and Nanocomposite Films

On the basis of coordinated electrodeposition of carboxylated chitosan(CCS),we presented a green method to prepare Cu NCs and Cu NCs/CCS nanocomposite films.The method shows a range of benefits,such as the convenient and eco-friendly process,mild conditions,and simple post-treatment.The experimental results reveal that a homogeneous deposited film(Cu NCs/CCS nanocomposite film)is generated on the Cu plate(the anode)after electrodeposition,which exhibits an obvious red florescence.The results from TEM observation suggest there are nanoparticles(with the average particle size of 2.3 nm)in the deposited film.Spectral analysis results both demonstrate the existence of Cu NCs in the deposited film.Moreover,the Cu NCs/CCS film modified electrode is directly created through electrodeposition of CCS,which enables promising application in the electrochemical sensing.By means of fluorescence properties of Cu NCs,the Cu NCs/CCS film also owns the potential in fluorescence detection.Therefore,this work builds a novel method for the green synthesis of Cu NCs,meanwhile it offers a convenient and new electrodeposition strategy to prepare polysaccharide-based Cu NCs nanocomposites for uses in functional nanocomposites and bioelectronic devices.

AAV mediated carboxyl terminus of Hsp70 interacting protein overexpression mitigates the cognitive and pathological phenotypes of APP/PS1 mice

The E3 ubiquitin ligase,carboxyl terminus of heat shock protein 70(Hsp70)interacting protein(CHIP),also functions as a co-chaperone and plays a crucial role in the protein quality control system.In this study,we aimed to investigate the neuroprotective effect of overexpressed CHIP on Alzheimer’s disease.We used an adeno-associated virus vector that can cross the blood-brain barrier to mediate CHIP overexpression in APP/PS1 mouse brain.CHIP overexpression significantly ameliorated the performance of APP/PS1 mice in the Morris water maze and nest building tests,reduced amyloid-βplaques,and decreased the expression of both amyloid-βand phosphorylated tau.CHIP also alleviated the concentration of microglia and astrocytes around plaques.In APP/PS1 mice of a younger age,CHIP overexpression promoted an increase in ADAM10 expression and inhibitedβ-site APP cleaving enzyme 1,insulin degrading enzyme,and neprilysin expression.Levels of HSP70 and HSP40,which have functional relevance to CHIP,were also increased.Single nuclei transcriptome sequencing in the hippocampus of CHIP overexpressed mice showed that the lysosomal pathway and oligodendrocyte-related biological processes were up-regulated,which may also reflect a potential mechanism for the neuroprotective effect of CHIP.Our research shows that CHIP effectively reduces the behavior and pathological manifestations of APP/PS1 mice.Indeed,overexpression of CHIP could be a beneficial approach for the treatment of Alzheimer’s disease.

Amine-functionalized metal organic framework@graphene oxide as filler in PAEK-containing carboxyl group membrane for ultrafiltration with ultra-high permeability and strong fouling resistance

Achieving high fouling resistance and permeability using membrane separation technology in water treatment processes remains a challenge.In this work,a novel mixed-matrix membrane(MMM)(poly(arylene ether ketone)[PAEK]-containing carboxyl groups[PAEK-COOH]/UiO-66-NH_(2)@graphene oxide[GO])with superb fouling resistance and high permeability was prepared by the nonsolvent-induced phase separation method,by in-situ growth of UiO-66-NH_(2) on the GO layer,and by preparing hydrophilic PAEK-COOH.On the basis of the structure and performance analysis of the MMM,the maximum water flux reached 591.25 L·m^(-2)·h^(-1) for PAEK-COOH/UiO-66-NH_(2)@GO,whereas the retention rate for bovine serum albumin increased from 85.40%to 94.87%.As the loading gradually increased,the hydrophilicity of the MMMs increased,significantly enhancing their fouling resistance.The strongest anti-fouling ability observed was 94.74%,which was 2.02 times greater than that of the pure membrane.At the same time,the MMMs contained internal amide and hydrogen bonds during the preparation process,forming a cross-linked structure,which further enhanced the mechanical strength and chemical stability.In summary,the MMMs with high retention rate,strong permeability,and anti-fouling ability were successfully prepared.

Carboxylic bacterial cellulose fiber-based hydrogel electrolyte with imidazole-type ionic liquid for dendrite-free zinc metal batteries

Aqueous zinc metal batteries are regarded as the most promising energy storage system due to their advantages of high safety,low cost,and high theoretical capacity.However,the growth of dendrites and the occurrence of side reactions hinder the development of zinc metal batteries.Despite previous attempts to design advanced hydrogel electrolytes,achieving high mechanical performance and ionic conductivity of hydrogel electrolytes has remained challenging.In this work,a hydrogel electrolyte with an ionic crosslinked network is prepared by carboxylic bacterial cellulose fiber and imidazole-type ionic liquid,following by a covalent network of polyacrylamide.The hydrogel electrolyte possesses a superior ionic conductivity of 43.76 mS cm^(−1),leading to a Zn^(2+)migration number of 0.45,and high mechanical performance with an elastic modulus of 3.48 GPa and an elongation at breaking of 38.36%.More importantly,under the anion-coordination effect of the carboxyl group in bacterial cellulose and[BF4]−in imidazole-type ionic liquid,the solvation sheath of hydrated Zn^(2+)ions and the nucleation overpotential of Zn plating are regulated.The results of cycled testing show that the growth of zinc dendrites is effectively inhibited and the generation of irreversible by-products is reduced.With the carboxylic bacterial cellulose-based hydrogel electrolyte,the Zn||Zn symmetric batteries offer good cyclability as well as Zn||Ti batteries.

Electrocarboxylation of CO_(2) with Organic Substrates:Toward Cathodic Reaction

Electrocarboxylation of carbon dioxide(CO_(2))using organic substrates has emerged as a promising method for the sustainable synthesis of value-added carboxylic acids due to its renewable energy source and mild reaction conditions.The reactivity and product selectivity of electrocarboxylation are highly dependent on the cathodic behavior,involving a sequence of electron transfers and chemical reactions.Hence,it is necessary to understand the cathodic reaction mechanisms for optimizing reaction performance and product distribution.In this work,a review of recent advancements in the electrocarboxylation of CO_(2)with organic substrates based on different cathodic reaction pathways is presented to provide a reference for the development of novel methodologies of CO_(2)electrocarboxylation.Herein,cathodic reactions are particularly classified into two categories based on the initial electron carriers(i.e.,CO_(2)radical anion and substrate radical anion).Furthermore,three cathodic pathways(ENE(N),ENED,and EDEN)of substrate radical anion-induced electrocarboxylation are discussed,which differ in their electron transfer sequence,substrate dissociation,and nucleophilic reaction,to highlight their implications on reactivity and product selectivity.

Effect of linear carboxylic ester on low temperature performance of LiMn_2O_4-graphite cells

To improve the low-temperature performances of Li-ion cells, three types of linear carboxylic ester-based electrolyte, such as EC/EMC/EA（1：1：2, mass ratio）, EC/EMC/EP（1：1：2, mass ratio） and EC/EMC/EB（1：1：2, mass ratio）, were prepared to substitute for industrial electrolyte（EC/EMC/DMC）. Then, 18650-type Li Mn2O4-graphite cells（nominal capacity of 1150 mA ·h） were assembled and studied. Results show that the cells containing three types of electrolyte are able to undertake 5C discharging current with above 93% capacity retention at-20 °C. Electrochemical impedance spectra show that the discharge capacity fading of Li-ion cells at low temperature is mainly ascribed to the charge transfer resistance increasing with temperature decreasing. In comparison, the cells containing electrolyte of 1.0 mol/L LiPF6 in EC/EMC/EA（1：1：2, mass ratio） have the highest capacity retention of 90% at-40 °C and 44.41% at-60 °C, due to its lowest charge-transfer resistance.

Influence of Polycarboxylate Superplasticizer on Rheological Behavior in Cement Paste

Molecular structures of polycarboxylate（PCE） superplasticizer significantly affect the rheological properties of cement paste. Consequently, we employed self-synthesized PCE copolymers with different carboxylic densities to investigate their influence on the rheological behavior of cement paste. Three typical rheological models were applied to analyze the rheological properties, including Power-law model, Bingham model as well as Herschel-Buikley model. In addition, the thixotropical performances of cement paste in the presence of PCE with different carboxylic densities were investigated. The results show that the carboxylic density of PCE greatly influences the dispersing performance of PCE superplasticizers. As carboxylic density increases, the dispersing capability of PCE improves, and P（PEG1-AA6） possesses the strongest dispersing capability, the initial fluidity and 1 h fluidity of cement paste are both the highest, and cement paste has the lowest viscosity and the smallest hysteresis loop.

Two New Phenolic Carboxylic Acid Esters from Opuntia vulgaris

Two new phenolic carboxylic acid esters n-butyl eucomate(1) and methyl eucomate (2) and six known compounds eucomic acid(3), 3-β-acetyl-taraxerol (4), friedelin(5),lupenone(6),methyl linoleate(7) and methyl oleate(8) were isolated from the stems of Opuntia vulgaris Mill(Cactaceae). Their structures were determined on the basis of spectral methods. Compounds 3,4,6,7,8 were isolated for the first time from this plant.

Ni-catalyzed direct carboxylation of unactivated alkyl electrophiles with carbon dioxide

Carbon dioxide is a cheap, abundant and renewable C1 building block. Over the last two decades, considerable re- search efforts have been devoted to developing new reactions for the efficient incorporation of carbon dioxide into a broad range of compounds for the production of value-added materi- als [1]. Notably, these efforts have culminated in the develop- ment of several transition-metal-catalyzed methods capable of providing access to numerous synthetically important carbox- ylic acids and derivatives using carbon dioxide as a carboxyla- tive reagent [2].

Electrocarboxylation of Anthrone to Anthracene-9-carboxylic Acid in the Presence of CO_2

Electrocarboxylation of anthrone in the presence of CO2 to anthrance-9-carboxylic acid directly was carried out. The electroreduction behavior of anthrone was examined by cyclic voltammetry in the absence and presence of CO2. Then the influences of the supporting electrolytes, temperature, electrode material and anthrone concentration on the carboxylation yield were investigated. Under the optimized conditions, anthrancene-9-carboxylic acid was obtained in a good yield（96.1%）.

Synthesis,Crystal Structure and Biological Activities of Novel Di-n-butyl Tin Di-carboxylate

A novel macrocyclic complex 2{[（n-Bu2Sn）4O2-L2]2DMF} was synthesized by the reaction of 4-（1,2- dithioethylene）methylene-3,5-disoxo-1,6-heptadiene-1,7-dis-（o-formy~）-dis-p-phenoxyacetic acid（LH2, compound 1） with di-n-butyltin oxide. Compound 1 and complex 2 were characterized by elemental analysis, FTIR spectroscopy, and ~H NMR spectroscopy. The crystal structure of complex 2 was determined by single crystal X-ray diffraction analysis. There are two crystallographic independent molecules in complex 2, and each molecule structure is centro-symmetric and features a central rhombus cyclic Bu4Sn2O2 unit with two exocyclic Sn atoms linked at the O atoms of the four-membered ring. In molecule A, the four Sn atoms are five-coordinated. However, in molecule B, the four Sn atoms have two different coordination geometries, the endocyclic Sn atoms are five-coordinated and the exocyclic Sn atoms are four-coordinated. The dicarboxylate ligands in molecules A and B bridge exocylic or endocyclic tin atoms, forming two macroheterocycles with 26 atoms. Pilot studies have indicated that complex 2 has good anti- bacterial and antitumour activities.

Biomimetic Decarboxylation of Carboxylic Acids with PhI(OAc)_2 Catalyzed by Manganese Porphyrin [Mn(TPP)OAc]

Manganese（Ⅲ） meso-tetraphenylporphyrin acetate [Mn（TPP）OAc] served as an effective catalyst for the oxidative decarboxylation of carboxylic acids with （diacetoxyiodo）benzene [PhI（OAc）2] in CH2CI2-H2O（95：5, volume ratio）. The aryl substituted acetic acids are more reactive than the less electron rich linear carboxylic acids in the presence of catalyst Mn（TPP）OAc. In the former case, the formation of carbonyl products was complete within just a few minutes with 〉97% selectivities, and no further oxidation of the produced aldehydes was achieved under these catalytic conditions. This method provides a benign procedure owing to the utilization of low toxic（diacetoxyiodo） benzene, biologically relevant manganese porphyrins, and carboxylic acids.

Doebner condensation in ionic liquids [Bmim]BF_4 and [Bpy]BF_4 to synthesize α,β-unsaturated carboxylic acid

Ionic liquids [Bmim]BF4 and [Bpy]BF4 were employed as environmentally benign media in Doebner condensation to synthesize α, β-unsaturated carboxylic acid. The good results showed that [Bmim]BF4 and [Bpy]BF4 were efficient media for Doebner condensation, which could be recycled easily. The highest yields could reach 93% and 90% in [Bmim]BF4 and [Bpy]BF4, respectively.

Efficient hydrocarboxylation of alkynes based on carbodiimide‐regulated in situ CO generation from HCOOH:An alternative indirect utilization of CO_(2)

The role of carbodiimide as dehydrant in the chemo‐,regio‐and stereoselective Pd(Ⅱ/0)‐catalyzed hydrocarboxylation of various alkynes with HCOOH releasing CO in situ is reported for the first time to obtainα,β‐unsaturated carboxylic acids.Both symmetrical and unsymmetrical monoalkynes show good reactivity.Importantly,2,2’‐(1,4‐phenylene)diacrylic acid can also be synthesized in high yield through the dihydrocarboxylation of 1,4‐diethynylbenzene.Besides,an excellent result in gram scale experiment and TON up to 900 can be obtained,displaying the efficiency of this protocol.Notably,regulating the types and concentrations of dehydrant can control the CO generation,avoiding directly operating toxic CO and circumventing sensitivity issue to the CO amount.On the basis of the attractive features of formic acid including easy preparation through CO_(2) hydrogenation and efficient liberation of CO,this protocol using formic acid as bridging reagent between CO_(2) and CO can be perceived as an indirect utilization of CO_(2),offering an alternative method for preparing acrylic acid analogues.

Regioselective Direct Carboxylation of 2-Naphthol with Supercritical CO₂in the Presence of K₂CO₃

A direct regioselective preparation of 2-hydroxynaphthalene-6-carboxylic acid, a useful industrial intermediate of aro-matic polyester from 2-naphthol was conducted by use of excess amount of K2CO3 (10-fold molar to 2-naphthol) under supercritical CO2 at 10 MPa and 473 K. The obtained yield under this condition was ca. 20 mol% to 2-naphthol. The further investigations may provide an alternative process to the conventional Kolbe-Schmitt reaction, because of no use of strong alkali and recoverability of K2CO3. Theoretical explanation about the regioselectivity was achieved by means of DFT calculations.

Organocatalyzed Decarboxylation of Naturally Occurring Cinnamic Acids: Potential Role in Flavoring Chemicals Production

The mechanism and the final outcome of the Knoevenagel-Doebner reaction are discussed. The condensation reaction between different hydroxy-substituted aromatic aldehydes and malonic acid is performed using piperidine as organocatalyst. The key role of the catalyst is clearly pointed out during the decarboxylation of ferulic acid, without the use of a strong decarboxylating agent, leading to a 4-vinylphenol derivative. Based on the results obtained, the studied pathway may be important in the understanding of vinylphenol production during malting and brewing of wheat and barley grains. Finally, changing the solvent of the reaction from pyridine to water in the Knoevenagel-Doebner reaction of 4-hydroxybenzaldehydes, dimerization of resulting styrene derivatives is observed. These results can be of interest also in the field of food chemistry, since cinnamic acids are frequently found in fruits and vegetables used for human consumption.

How Effective Is the Single-point Energy Calculation in Investigating the Reaction Mechanisms?New Decarboxylation Mechanism of Pyrrole-2-carboxylic Acid by Full Optimization with CPCM Solvation Model

The decarboxylation of pyrrole-2-carboxylic acid in acid solutions was elucidated by full optimization with the CPCM solvation model at the B3LYP/6-31 l＋＋G（d,p） level. Compared with the single-point energy calculation, CPCM full optimization is better to model solvent environments to gain reasonable reaction mechanisms. The π interactions play a significant role in the decarboxylation of pyrrole-2-carboxylic acid （R）. Firstly, the a hydrogen is protonated, but all of the carbonyl hydration pathways bear relatively higher energy barriers. The carbonyl group can rove over the pyrrole ring, but it does not lead to the speciation of pyrrole and protonated carbon dioxide for the latter is an energy-rich species. The decarboxylation mechanism proposed here is that, the protonated pyrrole-2-carboxylic acid （RH） decarboxylates via direct C-C bond cleavage with the aid of a water molecule to accommodate the proton on the carbonyl group.

Synthesis and Crystal Structure of Methyl 2-(Diphenylamino)-4-phenyl-1,3-thiazole-5-carboxylate

The title compound, methyl 2-（diphenylamino）-4-phenyl-1,3-thiazole-5-carboxylate, was synthesized and studied by single-crystal X-ray diffraction method. The structure of the product was confirmed by IR, 1H- and 13C-NMR spectroscopy and elemental analysis. These experimental studies were supported by quantum mechanical calculations. The structure was solved in monoclinic, space group P21/c with a = 9.573（3）, b = 19.533（7）, c = 9.876（3）, β = 92.35（4）°, V = 1845.2（10）3, T = 85（2） K, Z = 4, R = 0.040 and wR = 0.089 for 6424 observed reflections with I2σ（I）.

一个新的三维超分子配位聚合物[Ni(pyridine-2-carboxylate)2]n·2nH2O的水热合成及晶体结构

采用水热法合成了一个新的金属-有机配位聚合物[Ni(pyridine-2-carboxylate)2]n.2nH2O,对其进行元素分析、红外光谱和X射线单晶衍射测定.结构分析表明:该晶体属于三斜晶系,P-1空间群,晶胞参数a=5.1284(6)nm,b=7.6346(9)nm,c=9.2295(11)nm,α=74.902(2)°,β=84.347(2)°,γ=71.442(2)°,V=330.70(7)nm3,化学式为C12H12NiN2O6,Mr=338.95,Dc=1.702g/cm3,μ(Mo,Kα)=1.497mm-1,F(000)=174,Z=1,R=0.0333,wR=0.0384((I>2σ(I)).并且该配合物通过O—H…O和C—H…O氢键形成了三维超分子网状结构.