Fabrication of Porous Polycaprolactone/Carboxymethylcellulose Scaffolds by using Salt Leaching Technique

The purpose of this work was to fabricate three-dimensional porous scaffolds by using the salt leaching technique.This technique is simple and it does not need the pressure or dislike expensive equipment.The study selected polycaprolactone blended with carboxymethylcellulose that is the additive.The ratios of them were derived from mixture design in Minitab program that was 98/2(P1),93.5/6.5(P2),89/11(P3),84.5/15.5(P4),and 80/20(P5),respectively.The scanning electron microscopy(SEM)was applied to assess the physical properties and the pore size dimension of the scaffold from SEM micrographs.The results of SEM present the scaffolds happened interconnected porous structures that are found in all of the P1-P5 samples.The pore size dimension of all sample scaffolds is in the range of 264.11-348.28μm.Whereas the largest and the smallest of pore size are the sample of P3 and P2,respectively,while the porosity ranges from 98.06%-98.88%that the sample of P5 is the greatest and the sample of P4 is the slightly lowest.In conclusion,the blended PCL/CMC scaffolds P1-P5 were formed by salt leaching technique suitable to use in tissue engineering application.However,the amount of CMC blended with PCL should be reasonable in order to adjust the hydrophilic of the scaffold.

Comparison of cytotoxicity and wound healing effect of carboxymethylcellulose and hyaluronic acid on human corneal epithelial cells

AIM: To investigate the cytotoxic effect on human corneal epithelial cells(HCECs) and the ability to faciliate corneal epithelial wound healing of carboxymethylcellulose(CMC) and hyaluronic acid(HA).METHODS: HCECs were exposed to 0.5% CMC(Refresh plus, Allergan, Irvine, California, USA) and 0.1% and 0.3%HA(Kynex , Alcon, Seoul, Korea, and Hyalein mini,Santen, Osaka, Japan) for the period of 30 min, and 4, 12,and 24 h. Methyl thiazolyl tetrazoiun(MTT)-based calorimetric assay was performed to assess the metabolic activity of cellular proliferation and lactate dehydrogenase(LDH) leakage assay to assess the cytotoxicity. apoptotic response was evaluated with flow cytometric analysis and fluorescence staining with Annexin V and propiodium iodide. Cellular morphology was evaluated by inverted phase-contrast light microscopy and electron microscopy. The wound widths were measured 24 h after confluent HCECs were scratch wounded.RESULTS: The inhibitory effect of human corneal epithelial proliferation and cytotoxicity showed the time-dependent response but no significant effect. Apoptosis developed in flow cytometry and apoptotic cells weredemonstrated in fluorescent micrograph. The damaged HCECs were detached from the bottom of the dish and showed the well-developed vacuole formations. Both CMC and HA stimulated reepithehlialization of HCECs scratched, which were more observed in CMC.CONCLUSION: CMC and HA, used in artificial tear formulation, could be utilized without any significant toxic effect on HCECs. Both significantly stimulated HCEC reepithelialization of corneal wounds.

Preparation of hybridizing zeolitic imidazolate frameworks with carboxymethylcellulose for adsorption separation of n-hexane/3-methylpentane

A novel ZIF-8-CMC hybrid material was fabricated from the hybridization of ZIF-8 and carboxymethylcellulose(CMC) by impregnation method for n-hexane/3-methylpentane separation.The surface properties of ZIF-8 were tailored by introducing CMC into ZIF-8 nanoparticles.In this work,adsorption separation of n-hexane(nHEX) and 3-methylpentane(3 MP) on ZIF-8-CMC were investigated by batch vapor-phase adsorption and liquid-phase breakthrough adsorption.The adsorption selectivity of nHEX/3 MP reversed from preferable adsorption of nHEX to preferable adsorption of 3 MP upon the increasing of CMC containing in the hybrid materials.As the temperature increases,the adsorption amounts of nHEX and 3 MP decrease.With the increasing of CMC contents,the nHEX uptake decreased,the uptake capacity of 3 MP increased gradually.For liquid-phase breakthrough adsorption,the dynamic adsorption capacity of nHEX also decreased with the increasing of temperature.

Electrochemical Formation of Polypyrrole-carboxymethylcellulose Conducting Polymer Composite Films

The electrochemical preparation of polypyrrole-carboxymethylcellulose （PPY-CMC） conducting polymer composite films on indium tin oxide （ITO） glass electrode from an aqueous solution containing pyrrole monomer, ptoluenesulfonate electrolyte and carboxymethylcellulose insulating polymer is reported. The characterization by Fourier transform infrared spectroscopy （FT-IR） shows that carboxymethylcellulose （CMC） has been successfully incorporated into polypyrrole structure forming PPY-CMC polymer composite films. The conductivity of the prepared composite films was found to increase with increaseing CMC concentration in pyrrole solution, The optical microscopic results show the influence of CMC concentration in the pyrrole solution over the morphological changes of the prepared films. The dynamic mechanical analysis （DMA） on the prepared PPY-CMC film reveals the higher plastic property of the PPY-CMC composite film.

Effects of Carboxymethylcelluloses (CMC) on Some Hydraulic Properties of Sandy Soil

The property of hydrophilic polymers capable absorbing huge volumes of water led to many practical applications of these new materials in arid regions for improving the water retention in sandy soils. Effects of four carboxymethylcelluloses （CMC） mixed at various rates with the sandy soil, on the water-holding capacity and hydraulic conductivity （Ks） when leached with distilled water （simulating rain）, tap water, and saline water were evaluated. The maximum water absorption of CMCs ranged between 80 and 100 kg. kg^-1 of polymer; however, the absorbent swelling capacity decreased significantly with increasing the salt concentration in the solution. The water absorption capacity of CMCs decreased significantly when incorporated in the sandy soil compared to that of the absorbent alone. Application of CMC increased significantly the available water content up to 3 ± 0.5 times. All soils treated with CMCs showed a significant lower in Ks compared to the control soil. Meanwhile, Ks was found increased with increasing the salt concentration in the leaching solution. This understanding of characteristics of the absorbents and the interactions among absorbents, soil, and irrigation water quality would be of help in water management of sandy soil

Synthesis and Surface-Active Properties of Carboxymethylcellulose Esters Obtained by Microwave Assisted Transesterification of Vinyl Laurate

Polymeric biosurfactants were prepared by the transesterification reaction between vinyl laurate （VILA） and carboxymethylcellulose （CMC）. The reaction was performed in two different reaction media （（A） DMF/pTSA and （B） DMF/K2CO3） at various reaction conditions and using microwave radiation with controlled power as heating source. The obtained water-soluble VILA-CMC derivatives were characterized by FT-IR spectroscopy and their surface-active properties evaluated. All derivatives showed a very low esterification extent and moderate surface tension lowering effect. Nevertheless, they exhibited significant emulsifying efficiency comparable to that of the synthetic surfactant, Tween 20. The results suggested that suitable surface-active VILA-CMC derivatives can be prepared under microwave heating at low microwave power and reaction times in the range of few minutes, which represents a great advantage in comparison to transesterification reactions lasting up to 6 h at conventional heating.

Topical application of glycyrrhizin preparation ameliorates experimentally induced colitis in rats

AIM:To examine the efficacy of glycyrrhizin preparation(GL-p) in the treatment of a rat model of ulcerative colitis(UC).METHODS:Experimental colitis was induced by oral administration of dextran sodium sulfate.Rats with colitis were intrarectally administered GL-p or saline.The extent of colitis was evaluated based on body weight gain,colon wet weight,and macroscopic damage score.The expression levels of pro-inflammatory cytokines and chemokines in the inflamed mucosa were measured by cytokine antibody array analysis.The effect of GL-p on myeloperoxidase(MPO) activity in the inflamed mucosa and purified enzyme was assayed.RESULTS:GL-p treatment significantly ameliorated the extent of colitis compared to sham treatment with saline.Cytokine antibody array analysis showed that GL-p treatment significantly decreased the expression levels of pro-inflammatory cytokines and chemokines,including interleukin(IL)-1β,IL-6,tumor necrosis factor-α,cytokine-induced neutrophil chemoattractant-2,and monocyte chemoattractant protein-1 in the inflamed mucosa.Furthermore,GL-p inhibited the oxidative activity of mucosal and purified MPO.CONCLUSION:GL-p enema has a therapeutic effect on experimental colitis in rats and may be useful in the treatment of UC.

Preparation of CS-CMC Bipolar Membrane and its Application in Electro-generated FeO_4^(2-)

CS-CMC bipolar membrane was prepared and the cross-section photograph of CS-CMC BM was observed by SEM. FT-IR spectrum indicated that CS-CMC BM contained -N=CRH2^＋ and -COO^- functional groups. The charge density of -N--CRH2^＋ in CS membrane was about 14.13 mmol/g and the charge density of -COO in CMC membrane was about 9.01 mmol/g. The electrochemistry properties of CS-CMC BM were also studied. CS-CMC BM not only can effectively stop FeO4^2- from diffusing into the cathode chamber, but also plays an important role in the supply of OH＂ consumed during the electro-generated FeO4^2- process.

Development of triple-layered tablets containing laxatives with a hydrophilic polymer

Constipation is a common functional gastrointestinal disorder which has caused much discomfort affecting the quality of life. The prevalence of constipation in the general population is approximately 20%(1)Various kinds of laxatives were introduced such as bulking agent, stool softener, stimulant, and osmotic agent (2)Fixed dose combination with bisacodyl as a stimulant and docusate sodium as a stool softener, Ducolax STM, was developed as enteric coated tablets targeting colon.

THE UNIFORMITY OF DISTRIBUTION OF SUBSTITUENTS ALONG THE CHAIN OF CARBOXYMETHYL CELLULOSE SYNTHESIZED IN TWO-PHASE MEDIUM C_6H_6——C_2H_5OH

Based on the property that carboxymethylcellulose (CMC ) can be de-graded to anhydroglucose residues by cellulase, the rate constant (K) of enzymatic degra-dation of CMC synthesized in the benzene-ethanol medium has been determined. Further-morel experimental equation K = 2.71× 10^(-2)(DS)^(-1.2) reflecting the relationship betweenK and the degree of substitution (DS) is correlated and used to describe chemical mi-crostructure uniformity of the distribution of substituents along chains effectively. Chainstructure parameters of enzymatic degradation products of CMC-the number of chainbreaks and the percentage of glucose released have been also measured. Average length ofsubstituted and unsubstituted chain segments are calculated simultaneously. Through thestudy of static and dynamic procedures of enzymatic degradation, the method to charac-terize the distribution of substituents of CMC along the chain has been improved.

STUDY ON THE CHARACTERIZATION OF DISTRIBUTION OF SUBSTITUENTS ALONG THE CHAINOF CARBOXYMETHYL CELLULOSE

Four new paranmeters, and , and have been proposed to describe the average length of the sequence of substituted anhydroglucose units and that of unsubstituted ones respectively along the CMC chain. The methods for determining those parameters have also been presented . Six CMC samples have been characterized in terms of intrinsic viscosity, degree of substitution （DS）, index of substitution（SI）;and . It has been proved experimentally that, not only can describe the sequence distribution along the CMC chain, but also can be used for calculating SI and estimating the average degree of substitution in the substituted glucose rings.

Development of Composite Textile Structures for Wound Dressing Applications

The main objective of this research work was the development of novel and responsive nonwoven composite structures containing gelling materials for wound management. The development of novel all inclusive collagen booster(CB) therapeutic nonwoven wound dressings was mainly focused on. It provides essential functional properties such as high absorption,vertical and lateral wicking,and antibacterial and acidic pH properties. The developed composite wound dressing consisted of carboxymethylcellulose(CMC) fibre and also it was reinforced with polylactic acid( PLA) fibre. The produced composite wound dressings were treated with two different CBs at 4% by using the spray method. The details of the CBs have not been disclosed in this paper due to the Intellectual Property Rights( IPR) issues. The important benefit of using CB treatment is that it allows the maintenance of an acidic pH environment at the wound area. It is well known that acidic pH reduces the wound healing time and enhances the wound healing process. Furthermore,one of the CBs not only promotes the proliferation of the epithelial cells in wounds but also can provide antibacterial action. The PLA fibre reinforced CMC composite dressing has enhanced wicking properties which help to minimise the pooling of exudate on the wound bed and as a result maceration is prevented. The CBs treated dressings maintain the wound bed in an acidic pH condition which also improves the wound healing process. In addition to the above-mentioned properties,the CB treatment imparts antimicrobial activity against Gram-positive and Gram-negative bacteria,thus resulting in the reduction in the propensity for wound infection. Ultimately,the research has proved that the 4% CB treatment enhances the antimicrobial activity and the acidic pH characteristics of the developed CMC /PLA composite wound dressings.

Non-Exclusion Effects in Aqueous Size-Exclusion Chromatography of Polysaccharides

This paper concerned to investigation of aggregate formation processes in aqueous Size-exclusion chromatography (SEC) of Na-carboxymethylcellulose (Na-CMC).

Experimental evaluation of eco-friendly flocculants prepared from date palm rachis

Sodium carboxymethylcellulose （CMCNa） is an anionic water soluble polyelectrolyte widely used in many industrial sectors including food, textiles, papers, adhesives, paints, pharmaceuticals, cosmetics and mineral processing. CMCNa was produced by chemical modification of cellulose, and represents many advantages： natural, renewable, non-toxic and biodegradable. In this study, different kinds of CMCNa, prepared from an agricultural waste date palm rachis, were tested as eco-friendly flocculants for drinking water treatment and their performances as flocculants in turbidity removal enhancement were assessed. The prepared materials were characterized by the degree of substitution （DS） and polymerisation （DP）. The study of the effect of some experimental parameters on the coagulation-flocculation performance, using the prepared materials combined with aluminium sulphate （as coagulant）, showed that the best conditions for turbidity treatment were given for pH 8, coagulant dose 20 mg/L, flocculant concentration of 100 mg/L and stirring velocity （during the flocculation step） of 30 r/min. Under the optimum conditions, the turbidity removal using CMCNa, prepared from raw material, was about 95%. A comparison study between the flocculation performance of a commercial anionic flocculant （A100PWG： polyacrylamide） and that of the prepared CMCNa showed that the performance of the waste-based flocculant with a DS of 1.17 and a DP of 480 was 10% better than that achieved by the commercial one.

Microcapsules with compact wall from hydrocarbon/fluorocarbon composite surfactants for electrophoretic display

The components and their concentration ratio of surfactant mixture in aqueous solution of gelatin and sodium carboxymethylcellulose (NaCMC) are very important during the preparation of stable microcapsules for electrophoretic display.In this work,hydrocarbon/fluorocarbon composite surfactant was introduced for the first time into the capsule wall to improve the chemical resistance and barrier property of the microcapsules.By investigating surface tension and zeta potential of NaCMC with the mixture of sodium dodecyl sulfate (SDS)/perfluoro-nonene oxy benzene sulfonate (OBS),we found that both the presence of hydrophobic interaction and the hydrogen bonding between NaCMC and SDS/OBS enhanced the adsorption of NaCMC at the oil/water interface and thus facilitated the formation of capsule wall.The morphology,particle size,surface free energy and thermal stability of the obtained microcapsules were characterized.The results showed that optically transparent microcapsules with uniform size,smooth surface and compact wall can be obtained by adjusting the pH value of the reaction system and the concentration ratio of SDS/OBS.Based on the prepared microcapsules,a matrix display prototype operated at 9 V direct current in static driven mode was fabricated.