This paper presents analytical solutions for the stress and displacement field in elastic layered geo-materials induced by an arbitrary point load in the Cartesian coordinate system. The point load solutions can be ob...This paper presents analytical solutions for the stress and displacement field in elastic layered geo-materials induced by an arbitrary point load in the Cartesian coordinate system. The point load solutions can be obtained by referring to the integral transform and the transfer matrix technique. However, former solutions usually exist in the cylindrical coordinate system subjected, to axisymmetric loading. Based on the proposed solutions in the Cartesian coordinate, it is very easy to solve asymmetric problems and consider the condition with internal loads in multi-layered geo-materials. Moreover, point load solutions can be used to construct solutions for analytical examination of elastic problems and incorporated into numerical schemes such as boundary element methods. The results discussed in this paper indicate that there is no problem in the evaluation of the point load solutions with high accuracy and efficiency, and that the material non-homogeneity has a significant effect on the elastic field due to adjacent loading.展开更多
Automatic control technology is the basis of road robot improvement,according to the characteristics of construction equipment and functions,the research will be input type perception from positioning acquisition,real...Automatic control technology is the basis of road robot improvement,according to the characteristics of construction equipment and functions,the research will be input type perception from positioning acquisition,real-world monitoring,the process will use RTK-GNSS positional perception technology,by projecting the left side of the earth from Gauss-Krueger projection method,and then carry out the Cartesian conversion based on the characteristics of drawing;steering control system is the core of the electric drive unmanned module,on the basis of the analysis of the composition of the steering system of unmanned engineering vehicles,the steering system key components such as direction,torque sensor,drive motor and other models are established,the joint simulation model of unmanned engineering vehicles is established,the steering controller is designed using the PID method,the simulation results show that the control method can meet the construction path demand for automatic steering.The path planning will first formulate the construction area with preset values and realize the steering angle correction during driving by PID algorithm,and never realize the construction-based path planning,and the results show that the method can control the straight path within the error of 10 cm and the curve error within 20 cm.With the collaboration of various modules,the automatic construction simulation results of this robot show that the design path and control method is effective.展开更多
Based on an analysis of connotation and extension of the concept of the orthogonal curvilinear coordinates, we have deduced a platform of strain tensor expression of Cartesian coordinates, which turns out to be a func...Based on an analysis of connotation and extension of the concept of the orthogonal curvilinear coordinates, we have deduced a platform of strain tensor expression of Cartesian coordinates, which turns out to be a function of Lame coefficient and unit vector. By using transform matrix between Cartesian coordinates and orthogonal eurvilinear coordinates, we have deduced a mathematical expression for correcting displacement vector differential in orthogonal curvilinear coordinates, and given a general expression of strain tensor in orthogonal curvilinear coordinates.展开更多
Deployment of buoy systems is one of the most important procedures for the operation of buoy system. In the present study, a single-point mooring buoy system which contains surface buoy, cable segments with components...Deployment of buoy systems is one of the most important procedures for the operation of buoy system. In the present study, a single-point mooring buoy system which contains surface buoy, cable segments with components, anchor and so on is modeled by applying multi-body dynamics method. The motion equations are developed in discrete node description and fully Cartesian coordinates. Then numerical method is used to solve the ordinary differential equations and dynamics simulations are achieved while anchor is casting from board. The trajectories and velocities of different nodes without current and with current in buoy system are obtained. The transient tension force of each part of the cable is analyzed in the process of deployment. Numerical results indicate that the transient payload increases to a peak value when the anchor is touching the seabed and the maximum tension force will vary with different floating configuration. This work is helpful for design and deployment planning of buoy system.展开更多
Numerous authors studied polarities in incidence structures or algebrization of projective geometry <a href="#1">[1]</a> <a href="#2">[2]</a>. The purpose of the present wor...Numerous authors studied polarities in incidence structures or algebrization of projective geometry <a href="#1">[1]</a> <a href="#2">[2]</a>. The purpose of the present work is to establish an algebraic system based on elementary concepts of spherical geometry, extended to hyperbolic and plane geometry. The guiding principle is: “<em>The point and the straight line are one and the same</em>”. Points and straight lines are not treated as dual elements in two separate sets, but identical elements within a single set endowed with a binary operation and appropriate axioms. It consists of three sections. In Section 1 I build an algebraic system based on spherical constructions with two axioms: <em>ab</em> = <em>ba</em> and (<em>ab</em>)(<em>ac</em>) = <em>a</em>, providing finite and infinite models and proving classical theorems that are adapted to the new system. In Section Two I arrange hyperbolic points and straight lines into a model of a projective sphere, show the connection between the spherical Napier pentagram and the hyperbolic Napier pentagon, and describe new synthetic and trigonometric findings between spherical and hyperbolic geometry. In Section Three I create another model of a projective sphere in the Cartesian coordinate system of the plane, and give methods and techniques for using the model in the theory of functions.展开更多
A brief survey of fractional calculus and fractional differential forms was firstly given.The fractional exterior transition to curvilinear coordinate at the origin were discussed and the two coordinate transformation...A brief survey of fractional calculus and fractional differential forms was firstly given.The fractional exterior transition to curvilinear coordinate at the origin were discussed and the two coordinate transformations for the fractional differentials for three-dimensional Cartesian coordinates to spherical and cylindrical coordinates are obtained, respectively. In particular, for v=m=1 ,the usual exterior transformations, between the spherical coordinate and Cartesian coordinate, as well as the cylindrical coordinate and Cartesian coordinate, are found respectively, from fractional exterior transformation.展开更多
We investigate task performance and reading characteristics for scatterplots(Cartesian coordinates)and parallel coordinates.In a controlled eye-tracking study,we asked 24 participants to assess the relative distance o...We investigate task performance and reading characteristics for scatterplots(Cartesian coordinates)and parallel coordinates.In a controlled eye-tracking study,we asked 24 participants to assess the relative distance of points in multidimensional space,depending on the diagram type(parallel coordinates or a horizontal collection of scatterplots),the number of data dimensions(2,4,6,or 8),and the relative distance between points(15%,20%,or 25%).For a given reference point and two target points,we instructed participants to choose the target point that was closer to the reference point in multidimensional space.We present a visual scanning model that describes different strategies to solve this retrieval task for both diagram types,and propose corresponding hypotheses that we test using task completion time,accuracy,and gaze positions as dependent variables.Our results show that scatterplots outperform parallel coordinates significantly in 2 dimensions,however,the task was solved more quickly and more accurately with parallel coordinates in 8 dimensions.The eye-tracking data further shows significant differences between Cartesian and parallel coordinates,as well as between different numbers of dimensions.For parallel coordinates,there is a clear trend toward shorter fixations and longer saccades with increasing number of dimensions.Using an area-of-interest(AOI)based approach,we identify different reading strategies for each diagram type:For parallel coordinates,the participants’gaze frequently jumped back and forth between pairs of axes,while axes were rarely focused on when viewing Cartesian coordinates.We further found that participants’attention is biased:toward the center of the whole plot for parallel coordinates and skewed to the center/left side for Cartesian coordinates.We anticipate that these results may support the design of more effective visualizations for multidimensional data.展开更多
基金Project supported by the National Natural Science Foundation of China (No. 51008188)the China Postdoctoral Science Foundation (No. 20100470677)
文摘This paper presents analytical solutions for the stress and displacement field in elastic layered geo-materials induced by an arbitrary point load in the Cartesian coordinate system. The point load solutions can be obtained by referring to the integral transform and the transfer matrix technique. However, former solutions usually exist in the cylindrical coordinate system subjected, to axisymmetric loading. Based on the proposed solutions in the Cartesian coordinate, it is very easy to solve asymmetric problems and consider the condition with internal loads in multi-layered geo-materials. Moreover, point load solutions can be used to construct solutions for analytical examination of elastic problems and incorporated into numerical schemes such as boundary element methods. The results discussed in this paper indicate that there is no problem in the evaluation of the point load solutions with high accuracy and efficiency, and that the material non-homogeneity has a significant effect on the elastic field due to adjacent loading.
文摘Automatic control technology is the basis of road robot improvement,according to the characteristics of construction equipment and functions,the research will be input type perception from positioning acquisition,real-world monitoring,the process will use RTK-GNSS positional perception technology,by projecting the left side of the earth from Gauss-Krueger projection method,and then carry out the Cartesian conversion based on the characteristics of drawing;steering control system is the core of the electric drive unmanned module,on the basis of the analysis of the composition of the steering system of unmanned engineering vehicles,the steering system key components such as direction,torque sensor,drive motor and other models are established,the joint simulation model of unmanned engineering vehicles is established,the steering controller is designed using the PID method,the simulation results show that the control method can meet the construction path demand for automatic steering.The path planning will first formulate the construction area with preset values and realize the steering angle correction during driving by PID algorithm,and never realize the construction-based path planning,and the results show that the method can control the straight path within the error of 10 cm and the curve error within 20 cm.With the collaboration of various modules,the automatic construction simulation results of this robot show that the design path and control method is effective.
文摘Based on an analysis of connotation and extension of the concept of the orthogonal curvilinear coordinates, we have deduced a platform of strain tensor expression of Cartesian coordinates, which turns out to be a function of Lame coefficient and unit vector. By using transform matrix between Cartesian coordinates and orthogonal eurvilinear coordinates, we have deduced a mathematical expression for correcting displacement vector differential in orthogonal curvilinear coordinates, and given a general expression of strain tensor in orthogonal curvilinear coordinates.
基金supported by the National Natural Science Foundation of China (Grant No. 51175484)the Science Foundation of Shandong Province (Grant No. ZR2010EM052)
文摘Deployment of buoy systems is one of the most important procedures for the operation of buoy system. In the present study, a single-point mooring buoy system which contains surface buoy, cable segments with components, anchor and so on is modeled by applying multi-body dynamics method. The motion equations are developed in discrete node description and fully Cartesian coordinates. Then numerical method is used to solve the ordinary differential equations and dynamics simulations are achieved while anchor is casting from board. The trajectories and velocities of different nodes without current and with current in buoy system are obtained. The transient tension force of each part of the cable is analyzed in the process of deployment. Numerical results indicate that the transient payload increases to a peak value when the anchor is touching the seabed and the maximum tension force will vary with different floating configuration. This work is helpful for design and deployment planning of buoy system.
文摘Numerous authors studied polarities in incidence structures or algebrization of projective geometry <a href="#1">[1]</a> <a href="#2">[2]</a>. The purpose of the present work is to establish an algebraic system based on elementary concepts of spherical geometry, extended to hyperbolic and plane geometry. The guiding principle is: “<em>The point and the straight line are one and the same</em>”. Points and straight lines are not treated as dual elements in two separate sets, but identical elements within a single set endowed with a binary operation and appropriate axioms. It consists of three sections. In Section 1 I build an algebraic system based on spherical constructions with two axioms: <em>ab</em> = <em>ba</em> and (<em>ab</em>)(<em>ac</em>) = <em>a</em>, providing finite and infinite models and proving classical theorems that are adapted to the new system. In Section Two I arrange hyperbolic points and straight lines into a model of a projective sphere, show the connection between the spherical Napier pentagram and the hyperbolic Napier pentagon, and describe new synthetic and trigonometric findings between spherical and hyperbolic geometry. In Section Three I create another model of a projective sphere in the Cartesian coordinate system of the plane, and give methods and techniques for using the model in the theory of functions.
文摘A brief survey of fractional calculus and fractional differential forms was firstly given.The fractional exterior transition to curvilinear coordinate at the origin were discussed and the two coordinate transformations for the fractional differentials for three-dimensional Cartesian coordinates to spherical and cylindrical coordinates are obtained, respectively. In particular, for v=m=1 ,the usual exterior transformations, between the spherical coordinate and Cartesian coordinate, as well as the cylindrical coordinate and Cartesian coordinate, are found respectively, from fractional exterior transformation.
基金We would like to thank the Carl-Zeiss-Foundation(Carl-Zeiss-Stiftung)the German Research Foundation(DFG)for financial support within project B01 of SFB/Transregio 161.
文摘We investigate task performance and reading characteristics for scatterplots(Cartesian coordinates)and parallel coordinates.In a controlled eye-tracking study,we asked 24 participants to assess the relative distance of points in multidimensional space,depending on the diagram type(parallel coordinates or a horizontal collection of scatterplots),the number of data dimensions(2,4,6,or 8),and the relative distance between points(15%,20%,or 25%).For a given reference point and two target points,we instructed participants to choose the target point that was closer to the reference point in multidimensional space.We present a visual scanning model that describes different strategies to solve this retrieval task for both diagram types,and propose corresponding hypotheses that we test using task completion time,accuracy,and gaze positions as dependent variables.Our results show that scatterplots outperform parallel coordinates significantly in 2 dimensions,however,the task was solved more quickly and more accurately with parallel coordinates in 8 dimensions.The eye-tracking data further shows significant differences between Cartesian and parallel coordinates,as well as between different numbers of dimensions.For parallel coordinates,there is a clear trend toward shorter fixations and longer saccades with increasing number of dimensions.Using an area-of-interest(AOI)based approach,we identify different reading strategies for each diagram type:For parallel coordinates,the participants’gaze frequently jumped back and forth between pairs of axes,while axes were rarely focused on when viewing Cartesian coordinates.We further found that participants’attention is biased:toward the center of the whole plot for parallel coordinates and skewed to the center/left side for Cartesian coordinates.We anticipate that these results may support the design of more effective visualizations for multidimensional data.