The alcohol synthesis with a good proportion of higher alcohols was studied over promoted Co/CuLaZr catalysts. the molybdenum addition improved greatly the performance. The results of probe molecule tests could be use...The alcohol synthesis with a good proportion of higher alcohols was studied over promoted Co/CuLaZr catalysts. the molybdenum addition improved greatly the performance. The results of probe molecule tests could be used to explain the effects.展开更多
2,5-Furandicarboxylic(FDCA) is a potential substitute for petroleum-derived terephthalic acid, and aerobic oxidation of5-hydroxymethylfurfural(HMF) provides an efficient route to synthesis of FDCA. On an activated car...2,5-Furandicarboxylic(FDCA) is a potential substitute for petroleum-derived terephthalic acid, and aerobic oxidation of5-hydroxymethylfurfural(HMF) provides an efficient route to synthesis of FDCA. On an activated carbon supported ruthenium(Ru/C) catalyst(with 5 wt% Ru loading), HMF was readily oxidized to FDCA in a high yield of 97.3% at 383 K and 1.0 MPa O_2 in the presence of Mg(OH)_2 as base additive. Ru/C was superior to Pt/C and Pd/C and also other supported Ru catalysts with similar sizes of metal nanoparticles(1–2 nm). The Ru/C catalysts were stable and recyclable, and their efficiency in the formation of FDCA increased with Ru loadings examined in the range of 0.5 wt%–5.0 wt%. Based on the kinetic studies including the effects of reaction time, reaction temperature, O_2 pressure, on the oxidation of HMF to FDCA on Ru/C, it was confirmed that the oxidation of HMF to FDCA proceeds involving the primary oxidation of HMF to 2,5-diformylfuran(DFF) intermediate, and its sequential oxidation to 5-formyl-2-furancarboxylic acid(FFCA) and ultimately to FDCA, in which the oxidation of FFCA to FDCA is the rate-determining step and dictates the overall formation rate of FDCA. This study provides directions towards efficient synthesis of FDCA from HMF, for example, by designing novel catalysts more efficient for the involved oxidation step of FFCA to FDCA.展开更多
Adding a small amount of nanocrystalline TiO2@C （TiO2 supported on nano- porous carbon） composite dramatically decreases the operating temperatures and improves the reaction kinetics for hydrogen storage in NaAlH4. ...Adding a small amount of nanocrystalline TiO2@C （TiO2 supported on nano- porous carbon） composite dramatically decreases the operating temperatures and improves the reaction kinetics for hydrogen storage in NaAlH4. The nano- crystalline TiO2@C composite synthesized at 900 ℃ （referred as TiO2@C-900） exhibits superior catalytic activity to other catalyst-containing samples. The onset dehydrogenation temperature of the TiO2@C-900-containing sample is lowered to 90 ℃; this is 65 ℃ lower than that of the pristine sample. The dehydrogenated sample is completely hydrogenated at 115 ℃ and 100 bar of hydrogen pressure with a hydrogen capacity of 4.5 wt.%. Structural analyses reveal that the Ti undergoes a reduction process of Ti^4＋→Ti^3＋→Ti^2＋→Ti during the ball milling and heating processes, and further converts to Ti hydrides or forms Ti-Al species after rehydrogenation. The catalytic activities of Ti-based catalytic species decrease in the order Al-Ti-species 〉 TiH0.71 〉 TiH2 〉 TiO2. This understanding guides further improvement in hydrogen storage properties of metal alanates using nanocrvstalline transition metal-based additives.展开更多
文摘The alcohol synthesis with a good proportion of higher alcohols was studied over promoted Co/CuLaZr catalysts. the molybdenum addition improved greatly the performance. The results of probe molecule tests could be used to explain the effects.
基金supported by the National Natural Science Foundation of China(21373019,21433001,21690081)
文摘2,5-Furandicarboxylic(FDCA) is a potential substitute for petroleum-derived terephthalic acid, and aerobic oxidation of5-hydroxymethylfurfural(HMF) provides an efficient route to synthesis of FDCA. On an activated carbon supported ruthenium(Ru/C) catalyst(with 5 wt% Ru loading), HMF was readily oxidized to FDCA in a high yield of 97.3% at 383 K and 1.0 MPa O_2 in the presence of Mg(OH)_2 as base additive. Ru/C was superior to Pt/C and Pd/C and also other supported Ru catalysts with similar sizes of metal nanoparticles(1–2 nm). The Ru/C catalysts were stable and recyclable, and their efficiency in the formation of FDCA increased with Ru loadings examined in the range of 0.5 wt%–5.0 wt%. Based on the kinetic studies including the effects of reaction time, reaction temperature, O_2 pressure, on the oxidation of HMF to FDCA on Ru/C, it was confirmed that the oxidation of HMF to FDCA proceeds involving the primary oxidation of HMF to 2,5-diformylfuran(DFF) intermediate, and its sequential oxidation to 5-formyl-2-furancarboxylic acid(FFCA) and ultimately to FDCA, in which the oxidation of FFCA to FDCA is the rate-determining step and dictates the overall formation rate of FDCA. This study provides directions towards efficient synthesis of FDCA from HMF, for example, by designing novel catalysts more efficient for the involved oxidation step of FFCA to FDCA.
文摘Adding a small amount of nanocrystalline TiO2@C （TiO2 supported on nano- porous carbon） composite dramatically decreases the operating temperatures and improves the reaction kinetics for hydrogen storage in NaAlH4. The nano- crystalline TiO2@C composite synthesized at 900 ℃ （referred as TiO2@C-900） exhibits superior catalytic activity to other catalyst-containing samples. The onset dehydrogenation temperature of the TiO2@C-900-containing sample is lowered to 90 ℃; this is 65 ℃ lower than that of the pristine sample. The dehydrogenated sample is completely hydrogenated at 115 ℃ and 100 bar of hydrogen pressure with a hydrogen capacity of 4.5 wt.%. Structural analyses reveal that the Ti undergoes a reduction process of Ti^4＋→Ti^3＋→Ti^2＋→Ti during the ball milling and heating processes, and further converts to Ti hydrides or forms Ti-Al species after rehydrogenation. The catalytic activities of Ti-based catalytic species decrease in the order Al-Ti-species 〉 TiH0.71 〉 TiH2 〉 TiO2. This understanding guides further improvement in hydrogen storage properties of metal alanates using nanocrvstalline transition metal-based additives.
