Solvent- and catalyst-free synthesis of dihydropyrimidinthiones in one-pot under focused microwave irradiation conditions

Fifteen dihydropyrimidinthiones have been synthesized by microwave-assisted Biginelli reactions without any solvent or catalyst. The advantages of this novel protocol include the excellent yield, operational simplicity, short time and the avoidance of the use of organic solvents and catalysts.

Navigating the pathways:TAR-DNA-binding-protein-43 aggregation,axonal transport,and local synthesis in amyotrophic lateral sclerosis pathology

Neurons are highly polarized cells with axons reaching over a meter long in adult humans.To survive and maintain their proper function,neurons depend on specific mechanisms that regulate spatiotemporal signaling and metabolic events,which need to be carried out at the right place,time,and intensity.Such mechanisms include axonal transport,local synthesis,and liquid-liquid phase separations.Alterations and malfunctions in these processes are correlated to neurodegenerative diseases such as amyotrophic lateral sclerosis(ALS).

Catalyst-free synthesis and mechanical characterization of TaC nanowires

TaC nanowires are expected to be an ideal reinforcing material in ultra-high-temperature ceramics. However, their growth mechanisms and mechanical properties remain unclear, and low-cost large-scale synthesis has not been realised. In this study,bulk synthesis of [100]-oriented TaC nanowires is accomplished by carbothermal synthesis through a direct vapor-solid mechanism. Thermal resonance test results show that the synthesized square TaC nanowires with cross-sectional side-lengths of 65 to 497 nm have a size-independent Young’s modulus of(510.6±12.6) GPa;very close to the corresponding values of their bulk counterparts, but differing considerably from previously published measurements. Molecular dynamics(MD) simulations show that TaC nanowires with side-lengths of above 15 nm have a constant Young’s modulus of 517 GPa, and size effects on the modulus values should only occur at side-lengths below 15 nm. During bending tests, the TaC nanowires fracture into several segments in a brittle mode, and exhibit an increasing fracture strain from 1.88% to 4.28% as their side-length decreases from 489 to 90 nm. Weibull statistics analyses and TEM observations indicate that the failure of the nanowires should be primarily dependent on the number and size of surface defects. MD simulations further reveal that the defect-free TaC nanowires fail brittlely at a theoretical strain up to 5.76%.

Synthesis and growth mechanism of SiC/SiO2 nanochains by catalyst-free thermal evaporation method in Ar/CO atmosphere

SiC/SiO2 nanochains were synthesized on a carbon fiber substrate by a catalyst-free thermal evaporation method in the Ar/CO atmosphere.X-ray diffraction(XRD),Fourier-transform infrared spectroscopy(FT-IR),scanning electron microscopy(SEM)and transmission electron microscopy(TEM)revealed that the as-synthesized SiC/SiO2 nanochains are composed of single-crystalline SiC nanowires and amorphous SiO2 beads.The introduction of CO can promote the formation of SiO2,so that the SiC/SiO2 nanochains are subsequently formed during cooling.In addition,the photoluminescence spectrum of SiC/SiO2 nanochains showed a broad emission peak at around 350 nm,which is ascribed to the oxygen discrepancy in the SiO2 beads as well as the SiC/SiO2 interfacial effect.These findings can provide guidance for further study of the vapor growth of 1D SiC-based materials.

Solvent-free and catalyst-free method for the synthesis of 2,4,5-triarylimidazoles under microwave irradiation

A facile procedure for the synthesis of 2,4,5-lriarylimidazoles is being reported starting from benzil, aromatic aldehyde and ammonium acetate. The reactions were carried out with catalyst-free, solvent-free and under microwave irradiation conditions in high yield （80-99%） with short time （3-5 min） and environmental benign, as well as convenient operation. The structures of the compounds have been confirmed on the basis of their IR, 1H NMR, and/or 13C NMR, MS, and elemental analyzer.

Catalyst-free and solvent-free method for the synthesis of quinoxalines under microwave irradiation

A facile procedure for the synthesis, of quinoxalines is being reported starting from benzil and 1,2-diaminobenzene. The reactions were carried out catalyst-free, solvent-free and under microwave irradiation conditions in high yield （84-98%） with short time （3-6 min） and environmental benign, as well as convenient operation. The structures of all the compounds have been confirmed on the basis of their IR, 1H NMR, and/or 13C NMR, mass spectral data.

Expedient chemoselective and catalyst-free synthesis of 3,3-difluorochroman-4-ones from o-hydroxyarylenaminones and Selectfluor

An expedient and mild strategy for the synthesis of unconventional 2-（dimethylamino）-3,3-difluorochroman-4-one derivatives from o-hydroxyarylenaminones and Selectfluor was developed at room temperature under catalyst-free conditions. This method showed excellent chemoselectivity and great functional groups tolerance.

Improved microwave-assisted catalyst-free synthesis of9-aryl-5,9-dihydropyrimido[4,5-d][1,2,4]triazolo[1,5-a]pyrimidine-6,8(4H,7H)-dione derivatives

Agreen regioselective synthesis of some new and known 9-aryl-5,9-dihydropyrimido[4,5-d][l,2,4]triazolo[1,5-a]pyrimidine-6,8（4H,7H）-diones has been described via the microwave-assisted one-pot reaction of 3-amino-1H-1,2,4-triazoles,aromatic aldehydes and barbituric acids under solvent- and catalyst-free conditions.This operationally simple procedure is less laborious and provides a better scope than previously reported procedures.

Templated synthesis of transition metal phosphide electrocatalysts for oxygen and hydrogen evolution reactions

Transition metal phosphides(TMPs)have been regarded as alternative hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)catalysts owing to their comparable activity to those of noble metal-based catalysts.TMPs have been produced in various morphologies,including hollow and porous nanostructures,which are features deemed desirable for electrocatalytic materials.Templated synthesis routes are often responsible for such morphologies.This paper reviews the latest advances and existing challenges in the synthesis of TMP-based OER and HER catalysts through templated methods.A comprehensive review of the structure-property-performance of TMP-based HER and OER catalysts prepared using different templates is presented.The discussion proceeds according to application,first by HER and further divided among the types of templates used-from hard templates,sacrificial templates,and soft templates to the emerging dynamic hydrogen bubble template.OER catalysts are then reviewed and grouped according to their morphology.Finally,prospective research directions for the synthesis of hollow and porous TMP-based catalysts,such as improvements on both activity and stability of TMPs,design of environmentally benign templates and processes,and analysis of the reaction mechanism through advanced material characterization techniques and theoretical calculations,are suggested.

The structure-directing role of heterologous seeds in the synthesis of zeolite

Zeolites have been widely used as catalysts,ion-exchangers,and adsorbents in chemical industries,detergent industry,steel industry,glass industry,ceramic industry,medical and healthfield,and environmentalfield,and recently applied in energy storage.Seed-assisted synthesis is a very effective approach in promoting the crystallization of zeolites.In some cases,the target zeolite cannot be formed in the absence of seed zeolite.In homologous seed-assisted synthesis,the structure of the seed zeolite is the same to that of the target zeolite,while the structure of the seed zeolite is different to that of the target zeolite in the heterologous seed-assisted synthesis.In this review,we briefly summarized the heterologous seed-assisted syntheses of zeolites and analyzed the structure-directing effect of heterologous seeds and surveyed the“common composite building units(CBUs)hypothesis”and the“common secondary building units(SBUs)hypothesis”.However,both hypotheses cannot explain all observations on the heterologous seed-assisted syntheses.Finally,we proposed that the formation of the target zeolite does need nuclei with the structure of target zeolite and the formation of the nuclei of the target zeolite can be promoted by either the undissolved seed crystals with the same CBUs or SBUs to the target zeolite or by the facilitated appropriate distribution of the specific building units due to the presence of the heterologous seed that does not have any common CBUs and SBUs with the target zeolite.

Facile synthesis of hierarchical NaX zeolite from natural kaolinite for efficient Knoevenagel condensation

Zeolite catalysts have found extensive applications in the synthesis of various fine chemicals.However,the micropores of zeolites impose diffusion limitations on bulky molecules,greatly reducing the catalytic efficiency.Herein,we explore an economic and environmentally friendly method for synthesizing hierarchical NaX zeolite that exhibits improved catalytic performance in the Knoevenagel condensation reaction for producing the useful fine chemical 2-cyano-3-phenylacrylate.The synthesis was achieved via a low-temperature activation of kaolinite and subsequent in-situ transformation strategy without any template or seed.Systematic characterizations reveal that the synthesized NaX zeolite has both intercrystalline and intra-crystalline mesopores,smaller crystal size,and larger external specific surface area compared to commercial NaX zeolite.Detailed mechanism investigations show that the inter-crystalline mesopores are generated by stacking smaller crystals formed from in-situ crystallization of the depolymerized kaolinite,and the intra-crystalline mesopores are inherited from the pores in the depolymerized kaolinite.This synthesis strategy provides an energy-saving and effective way to construct hierarchical zeolites,which may gain wide applications in fine chemical manufacturing.

Optimal synthesis of heat-integrated distillation configurations using the two-column superstructure

In the realm of the synthesis of heat-integrated distillation configurations,the conventional approach for exploring more heat integration possibilities typically entails the splitting of a single column into a twocolumn configuration.However,this approach frequently necessitates tedious enumeration procedures,resulting in a considerable computational burden.To surmount this formidable challenge,the present study introduces an innovative remedy:The proposition of a superstructure that encompasses both single-column and multiple two-column configurations.Additionally,a simultaneous optimization algorithm is applied to optimize both the process parameters and heat integration structures of the twocolumn configurations.The effectiveness of this approach is demonstrated through a case study focusing on industrial organosilicon separation.The results underscore that the superstructure methodology not only substantially mitigates computational time compared to exhaustive enumeration but also furnishes solutions that exhibit comparable performance.

Microfluidic-oriented synthesis of enriched iridium nanodots/carbon architecture for robust electrocatalytic nitrogen fixation

Electrocatalytic nitrogen reduction reaction(NRR)is considered as a promising candidate to achieve ammonia synthesis because of clean electric energy,moderate reaction condition,safe operating process and harmless by-products.However,the chemical inertness of nitrogen and poor activated capacity on catalyst surface usually produce low ammonia yield and faradic efficiency.Herein,the microfluidic technology is proposed to efficiently fabricate enriched iridium nanodots/carbon architecture.Owing to in-situ co-precipitation reaction and microfluidic manipulation,the iridium nanodots/carbon nanomaterials possess small average size,uniform dispersion,high conductivity and abundant active sites,producing good proton activation and rapid electrons transmission and moderate adsorption/desorption capacity.As a result,the as-prepared iridium nanodots/carbon nanomaterials realize large ammonia yield of 28.73 μg h^(-1) cm^(-2) and faradic efficiency of 9.14%in KOH solution.Moreover,the high ammonia yield of 11.21 μg h^(-1) cm^(-2) and faradic efficiency of 24.30%are also achieved in H_(2)SO_(4) solution.The microfluidic method provides a reference for large-scale fabrication of nano-sized catalyst materials,which may accelerate the progress of electrocatalytic NRR in industrialization field.

Synthesis and Modulation of Low-Dimensional Transition Metal Chalcogenide Materials via Atomic Substitution

In recent years,low-dimensional transition metal chalcogenide(TMC)materials have garnered growing research attention due to their superior electronic,optical,and catalytic properties compared to their bulk counterparts.The controllable synthesis and manipulation of these materials are crucial for tailoring their properties and unlocking their full potential in various applications.In this context,the atomic substitution method has emerged as a favorable approach.It involves the replacement of specific atoms within TMC structures with other elements and possesses the capability to regulate the compositions finely,crystal structures,and inherent properties of the resulting materials.In this review,we present a comprehensive overview on various strategies of atomic substitution employed in the synthesis of zero-dimensional,one-dimensional and two-dimensional TMC materials.The effects of substituting elements,substitution ratios,and substitution positions on the structures and morphologies of resulting material are discussed.The enhanced electrocatalytic performance and photovoltaic properties of the obtained materials are also provided,emphasizing the role of atomic substitution in achieving these advancements.Finally,challenges and future prospects in the field of atomic substitution for fabricating low-dimensional TMC materials are summarized.

Boosting Fischer-Tropsch Synthesis via Tuning of N Dopants in TiO_(2)@CN-Supported Ru Catalysts

Nitrogen(N)-doped carbon materials as metal catalyst supports have attracted signifi cant attention,but the eff ect of N dopants on catalytic performance remains unclear,especially for complex reaction processes such as Fischer-Tropsch synthesis(FTS).Herein,we engineered ruthenium(Ru)FTS catalysts supported on N-doped carbon overlayers on TiO_(2)nanoparticles.By regulating the carbonization temperatures,we successfully controlled the types and contents of N dopants to identify their impacts on metal-support interactions(MSI).Our fi ndings revealed that N dopants establish a favorable surface environment for electron transfer from the support to the Ru species.Moreover,pyridinic N demonstrates the highest electron-donating ability,followed by pyrrolic N and graphitic N.In addition to realizing excellent catalytic stability,strengthening the interaction between Ru sites and N dopants increases the Ru^(0)/Ru^(δ+)ratios to enlarge the active site numbers and surface electron density of Ru species to enhance the strength of adsorbed CO.Consequently,it improves the catalyst’s overall performance,encompassing intrinsic and apparent activities,as well as its ability for carbon chain growth.Accordingly,the as-synthesized Ru/TiO_(2)@CN-700 catalyst with abundant pyridine N dopants exhibits a superhigh C_(5+)time yield of 219.4 mol CO/(mol Ru·h)and C_(5+)selectivity of 85.5%.

Recent advances in cobalt phosphide-based materials for electrocatalytic water splitting:From catalytic mechanism and synthesis method to optimization design

Electrochemical water splitting has long been considered an effective energy conversion technology for trans-ferring intermittent renewable electricity into hydrogen fuel,and the exploration of cost-effective and high-performance electrocatalysts is crucial in making electrolyzed water technology commercially viable.Cobalt phosphide(Co-P)has emerged as a catalyst of high potential owing to its high catalytic activity and durability in water splitting.This paper systematically reviews the latest advances in the development of Co-P-based materials for use in water splitting.The essential effects of P in enhancing the catalytic performance of the hydrogen evolution reaction and oxygen evolution reaction are first outlined.Then,versatile synthesis techniques for Co-P electrocatalysts are summarized,followed by advanced strategies to enhance the electrocatalytic performance of Co-P materials,including heteroatom doping,composite construction,integration with well-conductive sub-strates,and structure control from the viewpoint of experiment.Along with these optimization strategies,the understanding of the inherent mechanism of enhanced catalytic performance is also discussed.Finally,some existing challenges in the development of highly active and stable Co-P-based materials are clarified,and pro-spective directions for prompting the wide commercialization of water electrolysis technology are proposed.

Metagenomic analysis revealing the metabolic role of microbial communities in the free amino acid biosynthesis of Monascus rice vinegar during fermentation

Free amino acid(FAA)is the important component of vinegar that infl uences quality perception and consumer acceptance.FAA is one of the major metabolites produced by microorganisms;however,the microbial metabolic network on FAA biosynthesis remains unclear.Through metagenomic analysis,this work aimed to elucidate the roles of microbes in FAA biosynthesis during Monascus rice vinegar fermentation.Taxonomic profiles from functional analyses showed 14 dominant genera with high contributions to the metabolism pathways.The metabolic network for FAA biosynthesis was then constructed,and the microbial distribution in different metabolic pathways was illuminated.The results revealed that 5 functional genera were closely involved in FAA biosynthesis.This study illuminated the metabolic roles of microorganisms in FAA biosynthesis and provided crucial insights into the functional attributes of microbiota in vinegar fermentation.

Room Temperature Synthesis of Vertically Aligned Amorphous Ultrathin NiCo-LDH Nanosheets Bifunctional Flexible Supercapacitor Electrodes

Developing a simple scalable method to fabricate electrodes with high capacity and wide voltage range is desired for the real use of electrochemical supercapacitors.Herein,we synthesized amorphous NiCo-LDH nanosheets vertically aligned on activated carbon cloth substrate,which was in situ transformed from Co-metal-organic framework materials nano-columns by a simple ion exchange process at room temperature.Due to the amorphous and vertically aligned ultrathin structure of NiCo-LDH,the NiCo-LDH/activated carbon cloth composites present high areal capacities of 3770 and 1480 mF cm^(-2)as cathode and anode at 2 mA cm^(-2),and 79.5%and 80%capacity have been preserved at 50 mA cm^(-2).In the meantime,they all showed excellent cycling performance with negligible change after>10000 cycles.By fabricating them into an asymmetric supercapacitor,the device achieves high energy densities(5.61 mWh cm^(-2)and 0.352 mW cm^(-3)).This work provides an innovative strategy for simplifying the design of supercapacitors as well as providing a new understanding of improving the rate capabilities/cycling stability of NiCo-LDH materials.

Nucleosynthesis in the little bang

A new approach based on relativistic kinetic equations is proposed to solve the long-standing puzzle of light cluster formation, also called nucleosynthesis, in high-energy heavy-ion collisions. This method addresses the tension between STAR data and previous studies relying on either statistical equilibrium or coalescence approaches.

Cost-Effective Method of Gene Synthesis by Sequencing from Microchip-Derived Oligos for Droplet Cloning

Gene synthesis has provided important contributions in various fields including genomics and medicine. Current genes are 7 - 30 cents depending on the assembly and sequencing methods performed. Demand for gene synthesis has been increasing for the past few decades, yet available methods remain expensive. A solution to this problem involves microchip-derived oligonucleotides (oligos), an oligo pool with a substantial number of oligo fragments. Microchips have been proposed as a tool for gene synthesis, but this approach has been criticized for its high error rate during sequencing. This study tests a possible cost-effective method for gene synthesis utilizing fragment assembly and golden gate assembly, which can be employed for quicker manufacturing and efficient execution of genes in the near future. The droplet method was tested in two trials to determine the viability of the method through the accuracy of the oligos sequenced. A preliminary research experiment was performed to determine the efficacy of oligo lengths ranging from two to four overlapping oligos through Gibson assembly. Of the three oligo lengths tested, only two fragment oligos were correctly sequenced. Two fragment oligos were used for the second experiment, which determined the efficacy of the droplet method in reducing gene synthesis cost and speed. The first trial utilized a high-fidelity polymerase and resulted in 3% correctly sequenced oligos, so the second trial utilized a non-high-fidelity polymerase, resulting in 8% correctly sequenced oligos. After calculating, the cost of gene synthesis lowers down to 0.8 cents/base. The final calculated cost of 0.8 cents/base is significantly cheaper than other manufacturing costs of 7 - 30 cents/base. Reducing the cost of gene synthesis provides new insight into the cost-effectiveness of present technologies and protocols and has the potential to benefit the fields of bioengineering and gene therapy.