HZSM-5 zeolites undergoing the high-temperature process for boosting the bimolecular reaction in n-heptane catalytic cracking

High-temperature treatment is key to the preparation of zeolite catalysts.Herein,the effects of hightemperature treatment on the property and performance of HZSM-5 zeolites were studied in this work.X-Ray diffraction,N2physisorption,27Al magic angle spinning nuclear magnetic resonance(MAS NMR),and temperature-programmed desorption of ammonia results indicated that the hightemperature treatment at 650℃ hardly affected the inherent crystal and texture of HZSM-5zeolites but facilitated the conversion of framework Al to extra-framework Al,reducing the acid site and enhancing the acid strength.Moreover,the high-temperature treatment improved the performance of HZSM-5 zeolites in n-heptane catalytic cracking,promoting the conversion and light olefins yield while inhibiting coke formation.Based on the kinetic and mechanism analysis,the improvement of HZSM-5 performance caused by high-temperature treatment has been attributed to the formation of extra-framework Al,which enhanced the acid strength,facilitated the bimolecular reaction,and promoted the entropy change to overcome a higher energy barrier in n-heptane catalytic cracking.

Research Advances on Cyclohexane Catalytic Cracking

This article elaborates on the research achievements of domestic and foreign researchers in exploring the conversion pathways and reaction mechanisms of cyclohexane catalytic cracking in recent years.It analyzes the effects of different catalysts and process conditions on the conversion laws of cyclohexane,summarizes the conversion pathways of cyclohexane,and discusses the chemical mechanisms of several main reactions of cyclohexane in catalytic cracking,such as cracking,isomerization,hydrogen transfer,dehydrogenation,and alkylation;Several advanced characterization methods and common research methods were listed,and prospects for future development in this field were proposed based on existing research.

Fischer-Tropsch wax catalytic cracking for the production of low olefin and high octane number gasoline: Process optimization and heat effect calculation

To produce low olefin gasoline with high octane number by Fischer-Tropsch (F-T) wax fluid catalytic cracking (FCC) process, operating conditions optimization were carried out in the pilot-scale riser and turbulent fluidized bed (TFB) FCC unit. The experimental results in the riser indicated that under the condition of low reaction temperature and regenerated catalyst temperature, large catalyst-to-oil weight ratio (C/O) and long reaction time, the gasoline olefin content could be reduced to 20.28 wt%, but there is large octane number loss owing to a great loss in high octane number olefin. Therefore, a novel FCC process using the TFB reactor was proposed to strengthen the aromatization reaction. The reaction performance of TFB reactor were investigated. The result demonstrated that the TFB reactor has more significant effect in reducing olefins and improving aromatics. At the expense of certain gasoline yield, the gasoline olefin content reduced to 23.70 wt%, aromatics content could increase to 26.79 wt% and the RON was up to 91.0. The comparison of reactor structure and fluidization demonstrated that the TFB reactor has higher catalyst bed density. The reaction heat and coke combustion heat was calculated indicating the feasibility of its industrial application of the TFB process.

Experiment and modeling of coke formation and catalyst deactivation in n-heptane catalytic cracking over HZSM-5 zeolites

Since paraffins catalytic cracking was of significant importance to light olefins and aromatics production,this work was intended to gain insights into the feature and model of coke formation and catalyst deactivation in n-heptane catalytic cracking over HZSM-5 zeolites. 18 tests of n-heptane catalytic cracking were designed and carried out over HZSM-5 zeolites in a wide range of operating conditions. A particular attention was paid to the measurement of the conversion, product distribution, coke content, and the porosity and acidity of the fresh and spent HZSM-5 zeolites. It was found that alkene and aromatic promoted coke formation, and it reduced the pore volume and acid site of HZSM-5 zeolites, tailoring its performance in n-heptane catalytic cracking. The specific relationship between HZSM-5 zeolites, n-heptane conversion, product distribution and coke formation was quantitively characterized by the exponential and linear function. Based on the reaction network, the coupled scheme of coke formation and catalyst deactivation were specified for n-heptane catalytic cracking. The dual-model was proposed for the process simulation of n-heptane catalytic cracking over HZSM-5 zeolites. It predicted not only the conversion and product distribution but also coke content with the acceptable errors.

Effect of particle size of single-crystalline hierarchical ZSM-5 on its surface mass transfer in n-heptane catalytic cracking

Single-crystalline hierarchical ZSM-5 zeolites with different particle sizes(namely 100,140,and 200 nm)were successfully prepared by adjusting the amount of tetrapropylammonium hydroxide(TPAOH),and investigated in n-heptane catalytic cracking reaction.Diffusional measurements by zero-length column(ZLC)method showed that the apparent diffusivities of n-heptane decreased with the reduction of particle size,indicating the existence of surface barriers.Moreover,with the decrease of particle size,the additional diffusion path length increased,which meant the influence of surface barriers became more apparent.Despite the change of surface barriers,the intracrystalline diffusion still dominated the overall diffusion.Catalytic performance showed that the zeolite with smaller particle size had better stability.

Targeted Catalytic Cracking to Olefins(TCO):Reaction Mechanism,Production Scheme,and Process Perspectives

Light olefins are important organic building blocks in the chemicals industry.The main low-carbon olefin production methods,such as catalytic cracking and steam cracking,have considerable room for improvement in their utilization of hydrocarbons.This review provides a thorough overview of recent studies on catalytic cracking,steam cracking,and the conversion of crude oil processes.To maximize the production of light olefins and reduce carbon emissions,the perceived benefits of various technologies are examined.Taking olefin generation and conversion as a link to expand upstream and downstream processes,a targeted catalytic cracking to olefins(TCO)process is proposed to meet current demands for the transformation of oil refining into chemical production.The main innovations of this process include a multiple feedstock supply,the development of medium-sized catalysts,and a diameter-transformed fluidizedbed reactor with different feeding schemes.In combination with other chemical processes,TCO is expected to play a critical role in enabling petroleum refining and chemical processes to achieve low carbon dioxide emissions.

Influences of regeneration atmospheres on structural transformation and renderability of fluidized catalytic cracking catalyst

The regeneration of fluidized catalytic cracking(FCC)catalysts is an essential process in petroleum processing.The current study focused the regeneration reaction characteristics of spent fluidized catalytic cracking catalyst(SFCC)at different atmospheres with influences on pore evolution and activity,for a potential way to reduce emission,produce moderate chemical product(CO),and maintain catalyst activity.The results show that regeneration in air indicates a satisfaction on removing coke on the catalyst surface while giving a poor effect on eliminating the coke inside micropores.This is attributed that the combustion in air led to a higher temperature and further transformed kaolinite phase to silicaaluminum spinel crystals,which tended to collapse and block small pores or expand large pores,with similar results observed in pure O_(2)atmosphere.Nevertheless,catalysts regenerated in O_(2)/CO_(2)diminished the combustion damage to the pore structure,of which the micro porosity after regeneration increased by 32.4% and the total acid volume rose to 27.1%.The regeneration in pure CO_(2)displayed low conversion rate due to the endothermic reaction and low reactivity.The coexistence of gasification and partial oxidation can promote regeneration and maintain the original structure and good reactivity.Finally,a mechanism of the regeneration reaction at different atmospheres was revealed.

Core-shell-structured Composite ZSM-5@MCM-41 Catalysts:Fabrication,Characterization,and Enhanced Performance in Hexane Catalytic Cracking

A series of core-shell zeolites with a ZSM-5 zeolite core and a MCM-41 shell with varying shell thicknesses were successfully fabricated via a cetyltrimethylammonium bromide(CTAB)-directed sol-gel coating method in an ultradilute solution. Extensive characterization techniques, including XRD, TEM, N_(2) adsorption-desorption, NH_(3)-TPD, and IR measurements, confirmed the successful coating of a microporous ZSM-5 core with a mesoporous MCM-41 shell layer and were further employed to explore the textural properties and acidic properties of the samples. The hexane cracking results revealed a significant enhancement in olefin yields after introducing the MCM-41 shell to ZSM-5. Interestingly, a volcanic trend in olefin yields was observed with the increase in the shell thickness. In particular, the highest olefin yield of 51.5%, exceeding that of the core catalyst by 17.1%, was achieved when the shell thickness was controlled at 40 nm.Moreover, the catalyst lifetime investigation revealed that the core-shell composite catalyst exhibited a minimal reduction in hexane conversion of merely 3.8% over a 120 h reaction period, significantly outperforming the 11.3% reduction exhibited by the core catalyst. This remarkable catalytic performance was attributed to the passivation of external acid sites and the introduction of more developed pore channels by the shell, which effectively mitigated unwanted side reactions. The successful synthesis of these core-shell structured catalysts presents a novel strategy for improving catalytic performance in hexane cracking, in addition to serving as a solid foundation for the design of industrial catalysts for light naphtha cracking.

Effects of Light Rare Earth on Acidity and Catalytic Performance of HZSM-5 Zeolite for Catalytic Cracking of Butane to Light Olefins

The effects of rare earth（RE）on the structure,acidity,and catalytic performance of HZSM-5 zeolite were investigated.A series of RE/HZSM-5 catalysts,containing 7.54% RE（RE=La,Ce,Pr,Nd,Sm,Eu or Gd）,were prepared by the impregnation of the ZSM-5 type zeolites（Si/Al=64：1）with the corresponding RE nitrate aqueous solutions.The catalysts were characterized by means of FT-IR,UV-Vis,NH3-TPD,and IR spectroscopy of adsorbed pyridine.The catalytic performances of the RE/HZSM-5 for the catalytic cracking of mixed butane to light olefins were also measured with a fixed bed microreactor.The results revealed that the addition of light rare earth metal on the HZSM-5 catalyst greatly enhanced the selectivity to olefins,especially to propylene,thus increasing the total yield of olefins in the catalytic cracking of butane.Among the RE-modified HZSM-5 samples,Ce/HZSM-5 gave the highest yield of total olefins,and Nd/HZSM-5 gave the highest yield of propene at a reaction temperature of 600℃.The presence of rare earth metal on the HZSM-5 sample,not only modified the acidic properties of HZSM-5 including the amount of acid sites and acid type,that is,the ratio of L/B（Lewis acid/Brnsted acid）,but also altered the basic properties of it,which in turn promoted the catalytic performance of HZSM-5 for the catalytic cracking of butane.

Effects of Calcination Temperature on the Acidity and Catalytic Performances of HZSM-5 Zeolite Catalysts for the Catalytic Cracking of n-Butane

The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature （excluding 800 ℃）. The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature. The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5 zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.

Application of New Heavy Metals Resistant Porous Binder Material Used in Fluid Catalytic Cracking Reaction

A novel porous binder was obtained from acid-treated kaolin. This new binder possessed abundant meso/macropores, good hydrothermal stability and heavy metal resistance. The prepared catalyst using new binder featured low attrition index and large pore volume. The catalysts were contaminated with Ni, V, and tested in a fixed-fluidized bed reactor unit. In comparison with the reference sample, the oil conversion achieved by the above-mentioned catalyst increased by 3.50 percentage points, and heavy oil yield decreased by 2.86 percentage points, while the total liquid yield and light oil yield increased by 2.82 percentage points and 0.79 percentage points, respectively. The perfect pore structure, good hydrothermal stability and heavy metal resistant performance of new binder were the possible causes leading to its outstanding performance.

Synthesis of La-Modified Ultra Stable Zeolite L and Its Application to Catalytic Cracking Catalyst

A new type of zeolite La-USL （ultra stable zeolite L （zeolite USL） modified by La）, which has superior activity, stability and selectivity in catalytic cracking of hydrocarbons and thus can be used as an active catalyst component, is reported in this paper. The zeolite L with relative crystallinity of above 90% was synthesized by the hydrothermal crystallization method under optimum conditions and characterized by means of XRD, NH3-TPD and isotherm adsorption techniques. The in-situ synthesized zeolite L with a SiO2/Al2O3 mole ratio of 5-6 was modified by cation ion exchange, hydrothermal dealumination and chemical modifications with La in order to prepare La-containing USL with a higher framework SiO2/Al2O3 mole ratio of 15-30. The modified zeolite La-USL was used as an active additive component of fluid catalytic cracking （FCC） catalyst and the resulting catalysts were evaluated by microactivity test （MAT） and fixed-fluidized bed （FFB） experiments using heavy oil as feedstock. The influence of La content in La- USL on cracking product distribution, gasoline group composition and research octane number （RON） was investigated. The results showed that when La content in La-USL was 0.8 wt%, the addition of the corresponding La-USL could result in a FCC catalyst that produced significant improvement in product distribution and gasoline quality.

Catalytic Cracking of Cycloparaffins Admixed with Olefins:1. Single-Event Microkinetic(SEMK) Modeling

Single-event microkinetic(SEMK) model of the catalytic cracking of methylcyclohexane admixed with 1-octene over REUSY zeolites at 693 K—753 K in the absence of coke formation is enhanced. To keep consistency with the wellknown carbenium ion chemistry, hydride transfer forming and consuming allylic carbenium ions in the aromatization of cycloparaffins are further investigated and differentiated. The reversibility of endocyclic β-scission and cyclization reactions is refined by accounting explicitly for the reacting olefins and resulting cycloparaffins in the corresponding thermodynamics. 24 activation energies for the reactions involved in the cracking of cycloparaffins are obtained by the regression of 15 sets of experimental data upon taking the resulting 37 main cracking products, i. e., responses into account. The enhanced SEMK model can adequately describe the catalytic behavior of 37 main products with conversion and temperature.

Studies on the preliminary cracking: The reasons why matrix catalytic function is indispensable for the catalytic cracking of feed with large molecular size

The matrix catalytic function when cracking the feed oil with large molecular size was systematically studied using three different catalyst configurations, including staged bed, partly mixed bed and completely mixed bed. Results showed that molecules in the feed oil with large molecular size indeed preferred to be first precracked on the matrix surface and then entered into the zeolite pores during the practical reaction process. Furthermore, the matrix catalytic function exhibited a great matrix-precracking ability to large feed molecules, which considerably increased the catalyst activity and the light oil selectivity. Besides the much better accessibility, the matrix-precracking ability was also from the similar capability to crack large feed hydrocarbons into the moderate fragments with that of the zeolite component. More interestingly, the interactions between the matrix catalytic function and the zeolite catalytic function made the catalyst not only exhibit much more catalytic advantages of the zeolite component, but also retain the matrix-precracking ability. As a result, the interactions enhanced the catalyst activity and improved the product distribution at the same time. The matrix catalytic function is indispensable for the catalytic cracking of feed with large molecular size, although the matrix component itself presented an inferior catalytic performance than the zeolite component did. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Fluid Catalytic Cracking Technology for Maximum Gasoline Production

Increasing gasoline production in FCC unit can improve the utilization efficiency of petroleum resources and gain economic benefit.This paper discusses the technical principles for increasing FCC gasoline yield from the aspects of feedstock properties,operating conditions,LCO(light cycle oil)recycling,catalyst selection and reactor type,and illustrates the industrial application examples for maximizing gasoline production.The technical measures,such as optimizing the feedstock,properly increasing the catalyst activity and reaction temperature,recycling LCO or hydrotreated LCO,applying high gasoline yield catalyst,and adopting the two-zone riser reactor,are proposed to enhance the gasoline yield.

Distribution of nitrogen and oxygen compounds in shale oil distillates and their catalytic cracking performance

The positive-and negative-ion electrospray ionization(ESI)coupled with Fourier transform-ion cyclotron resonance mass spectrometry(FT-ICR MS)was employed to identify the chemical composition of heteroatomic compounds in four distillates of Fushun shale oil,and their catalytic cracking performance was investigated.There are nine classes of basic nitrogen compounds(BNCs)and eleven classes of non-basic heteroatomic compounds(NBHCs)in the different distillates.The dominant BNCs are mainly basic N1 class species.The dominant NBHCs are mainly acidic O2 and O1 class species in the300-350℃,350-400℃,and 400-450℃distillates,while the neutral N1,N1 O1 and N2 compounds become relatively abundant in the>450℃fraction.The basic N1 compounds and acidic O1 and O2 compounds are separated into different distillates by the degree of alkylation(different carbon number)but not by aromaticity(different double-bond equivalent values).The basic N1 O1 and N2 class species and neutral N1 and N2 class species are separated into different distillates by the degrees of both alkylation and aromaticity.After the catalytic cracking of Fushun shale oil,the classes of BNCs in the liquid products remain unchanged,while the classes and relative abundances of NBHCs vary significantly.

Effects of Hydrotreating Severity on Hydrocarbon Compositions and Deep Catalytic Cracking Product Yields

Residue deep hydrotreating(RDHT)process was developed by the Research Institute of Petroleum Processing(RIPP)to provide high quality feedstock for deep catalytic cracking(DCC)process.In this research work,the effects of RDHT process and reaction severity on heteroatom removal,hydrogen content increase,hydrocarbon composition improvement,and DCC product yields were studied.It was showed that the RDHT process can effectively reduce heteroatoms,increase hydrogen content and improve the hydrocarbon compositions,which can contribute to an increase of light olefins yield in DCC unit.

Study of Carbon Nanotube Supported Co-Mo Selective Hydrodesulphurization Catalysts for Fluid Catalytic Cracking Gasoline

In this paper, carbon nanotube supported Co-Mo catalysts for selective hydrodesulphurization （HDS） of fluid catalytic cracking （FCC） gasoline were studied, using di-isobutylene, cyclohexene, 1-octene and thiophene as model compounds to simulate FCC gasoline. The results show that the Co-Mo/CNT has very high HDS activity and HDS/hydrogenation selectivity comparing with the Co-Mo/γ-Al2O3 and Co-Mo/AC catalyst systems. The saturation ratio of cyclohexene was lower than 50%, and the saturation ratio of 1,3-di-isobutylene lower than 60% for the Co-Mo/CNT catalysts. Co/Mo atomic ratio was found to be one of the most important key factors in influencing the hydrogenation selectivity and HDS activity, and the most suitable Co/Mo atomic ratio was 0.4. Co/CNT and Mo/CNT mono-metallic catalysts showed lower HDS activity and selectivity than the Co-Mo/CNT bi-metallic catalysts.

Conversion of Benzene in the Catalytic Cracking Process

The catalytic cracking of 1-hexene,1-heptene,1-octene,1-nonene,1-decene,and five olefins mixed with benzene,over USY catalysts was conducted in a small fixed fluidized bed reactor to study the conversion of benzene under catalytic cracking conditions.Benzene mainly alkylated with C_(2)-C_(5)light olefins,generating monosubstituted alkylbenzenes,and the concentration of light olefins dramatically affected the alkylbenzene yield.Due to the limitation of thermodynamic equilibrium,the yield of benzene alkylation to alkylbenzene in catalytic cracking was in a relative low level.The equilibrium constant of benzene alkylation decreases with the increasing reaction temperature which resulted in reduction of alkyl benzene yield.

Mechanistic Insights into the Catalytic Cracking of Cyclohexane

Although naphthenes have long been identified as important feedstock components for the production of light olefins and aromatics in fluid catalytic cracking units,their cacking mechanism and microscopic reaction networks,such as activation modes,ring-opening paths,and the production of aromatics,remain debated.In this context,we reported experimental and computational work aimed at elucidating the reaction network of naphthenes in fluid catalytic cracking using cyclohexane as the model naphthene.First,the main reactions for the formation of highly selective and value-added products such as light olefins and aromatics were discussed.Then,the proportions of cyclohexane activation via(i)the non-classical carbonium mechanism and(ii)the classical carbenium mechanism were analyzed by data fitting methods,which revealed that around 32.6%of cyclohexane was initiated by path(i),and the remaining naphthene was activated by path(ii).Moreover,our DFT results showed that the ring opening of cyclohexane through pathway(i)was more difficult than that through path(ii),and ring opening followed by the ring contraction of cyclohexane carbenium ions was the most energetically favorable route among the different ring-opening ways.