Effect of Mn-doping on performance of Li_3V_2(PO_4)_3/C cathode material for lithium ion batteries

Li3V2-2/3xMnx（PO4）3（0≤x≤0.12） powders were synthesized by sol-gel method. The effect of Mn2＋-doping on the structure and electrochemical performances of Li3V2（PO4）3/C was characterized by XRD, SEM, XPS, galvanostatic charge /discharge and electrochemical impedance spectroscopy（EIS）. The XRD study shows that a small amount of Mn2＋-doped does not alter the structure of Li3V2（PO4）3/C materials, and all Mn2＋-doped samples are of pure single phase with a monoclinic structure （space group P21/n）. The XPS analysis indicates that valences state of V and Mn are ＋3 and ＋2 in Li3V1.94Mn0.09（PO4）3/C, respectively, and the citric acid in raw materials was decomposed into carbon during calcination, and residual carbon exists in Li3V1.94Mn0.09（PO4）/C. The results of electrochemical measurements show that Mn2＋-doping can improve the cyclic stability and rate performance of these cathode materials. The Li3V1.94Mn0.09（PO4）3/C cathode material shows the best cyclic stability and rate performance. For example, at the discharge current density of 40 mA/g, after 100 cycles, the discharge capacity of Li3V1.94Mn0.09（PO4）3/C declines from initial 158.8 mA·h/g to 120.5 mA·h/g with a capacity retention of 75.9%; however, that of the Mn-undoed sample declines from 164.2 mA·h/g to 72.6 mA·h/g with a capacity retention of 44.2%. When the discharge current is increased up to 1C, the intial discharge capacity of Li3V1.94Mn0.09（PO4）3/C still reaches 146.4 mA·h/g, and the discharge capacity maintains at 107.5 mA·h/g after 100 cycles. The EIS measurement indicates that Mn2＋-doping with a appropriate amount of Mn2＋ decreases the charge transfer resistance, which is favorable for the insertion/extraction of Li＋.

Effects of chromium doping on performance of LiNi_(0.5)Mn_(1.5)O_4 cathode material

In order to improve the cycle and rate performance of LiNi0.5Mn1.5O4, LiCr2 Ni0.5 Mn1.5 O （0≤Y≤0.15） particles were Y -Y -Y 4 synthesized by the sucrose-aided combustion method. The effects of Cr doping in LiNi0.5Mn1.5O4 on the structures and electrochemical properties were investigated. The samples were characterized by X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, cyclic voltammetry （CV）, galvanostatic charge-discharge test and electrochemical impedance spectrum （EIS）. The results indicate that the LiCr2 Ni0.5 Mn1.5 O possess a spinel structure and small particle size, and LiCr0.2Ni0.4Mn1.4O4exhibits Y -Y -Y 4 the best cyclic and rate performance. It can deliver discharge capacities of 143 and 104 mA·h/g at 1C and 10C, respectively, with good capacity retention of 96.5% at 1C after 50 cycles.

Enhanced Electrochemical Performances of Ni Doped Cr_(8)O_(21)Cathode Materials for Lithium-ion Batteries

Cathode materials,nickel doped Cr_(8)O_(21),were synthesized by a solid-state method.The effects of Ni doping on the electrochemical performances of Cr_(8)O_(21) were investigated.The experimental results show that the discharge capacities of the samples depend on the nickel contents,which increases firstly and then decreases with increasing Ni contents.Optimized Ni_(0.5)Cr_(7.5)O_(21)delivers a first capacity up to 392.6 m Ah·g^(-1)at 0.1C.In addition,Ni doped sample also demonstrates enhanced cycling stability and rate capability compared with that of the bare Cr_(8)O_(21).At 1 C,an initial discharge capacity of 348.7 m Ah·g^(-1)was achieved for Ni_(0.5)Cr_(7.5)O_(21),much higher than 271.4 m Ah·g^(-1)of the un-doped sample,with an increase of more than 28%.Electrochemical impedance spectroscopy results confirm that Ni doping reduces the growth of interface resistance and charge transfer resistance,which is conducive to the electrochemical kinetic behaviors during charge-discharge.

Research on cathode material of Li-ion battery by yttrium doping

Modification of LiFePO4, LiMn2O4 and Li1＋xV3O8 by doping yttrium was investigated. The influences of doping Y on structure, morphology and electrochemical performance of cathode materials were investigated systematically. The results indicated that the mechanisms of Y doping in three cathode materials were different, so the influences on the material performance were different. The crystal structure of the three materials was not changed by Y doping. However, the crystal parameters were influenced. The crystal parameters of LiMn2O4 became smaller, and the interlayer distance of （100） crystal plane of Li1-xV3O8 was lengthened after Y doping. The grain size of Y-doped LiFePO4 became smaller and grain morphology became more regular than that of undoped LiFePO4. It indicated that Y doping had no influence on crystal particle and morphology of LiMn2O4. The morphology of Li1＋xV3O8 became irregular and its size became larger with the increase of Y. For LiFePOaand Li1＋xV3O8, both the initial discharge capacities and the cyclic performance were improved by Y doping. For LiMn2O4, the cyclic performance became better and the initial discharge capacities declined with increasing Y doping.

Effects of Na^+ doping on crystalline structure and electrochemical performances of Li Ni_(0.5)Mn_(1.5)O_4 cathode material

Pristine LiNi0.5Mn1.5O4and Na-doped Li0.95Na0.05Ni0.5Mn1.5O4cathode materials were synthesized by a simple solid-statemethod.The effects of Na+doping on the crystalline structure and electrochemical performance of LiNi0.5Mn1.5O4cathode materialwere systematically investigated.The samples were characterized by XRD,SEM,FT-IR,CV,EIS and galvanostatic charge/dischargetests.It is found that both pristine and Na-doped samples exhibit secondary agglomerates composed of well-defined octahedralprimary particle,but Na+doping decreases the primary particle size to certain extent.Na+doping can effectively inhibit the formationof LixNi1-xO impurity phase,enhance the Ni/Mn disordering degree,decrease the charge-transfer resistance and accelerate the lithiumion diffusion,which are conductive to the rate capability.However,the doped Na+ions tend to occupy8a Li sites,which forces equalamounts of Li+ions to occupy16d octahedral sites,making the spinel framework less stable,therefore the cycling stability is notimproved obviously after Na+doping.

Influence of Doping Rare Earth on Performance of Lithium Manganese Oxide Spinels as Cathode Materials for Lithium-Ion Batteries

Some rare earth doping spinel LiMn_(2-x)RE_xO_4 (RE=La, Ce, Nd) cathode materials for lithium ion batteries were synthesized by the solid-state reaction method. The structure characteristics of these produced samples were investigated by XRD, SEM, and particle size distribution analysis. According to the microstructure and charge-discharge testing, the effect of doping rare earth on stabilizing the spinel structure was analyzed. Through a series of doping experiments, it is shown that when the doping content x within the range of 0.01～0.02 the cycle performance of the materials is greatly improved. The discharge capacity of the sample LiMn_(1.98)La_(0.02)O_4, LiMn_(1.98)Ce_(0.02)O_4 and LiMn_(1.98)Nd_(0.02)O_4 remain 119.1, 114.2 and 117.5 mAh·g^(-1) after 50 cycles.

Nitroxide radical cathode material with multiple electron reactions

Organic materials with redox-active centers are regarded as promising candidates for rechargeable batteries in recent years for their light weight, low cost, environmental friendliness and structural diversity [1–4]. Organic materials, such as conducting polymers (polyacetylene, polypyrrole, polyaniline, etc.)[5], conjugated carbonyl compounds (quinone compounds, imides, etc.)[6–9] and nitroxide radical (N-O.)[10,11] compounds have been attempted as cathode materials in lithium-ion batteries (LIBs).

Influence of Ti^(4+) doping on electrochemical properties of LiFePO_4/C cathode material for lithium-ion batteries

To improve the performance of LiFePO4, single phase Li1-4xTixFePO4/C (x=0, 0.005, 0.010, 0.015) cathodes were synthesized by solid-state method. A certain content of glucose was used as carbon precursor and content of carbon in every final product was about 3.5%. The samples were characterized by X-ray diffraction(XRD), scanning electron microscopy observations(SEM), charge/discharge test, carbon analysis and electrochemical impedance spectroscopy(EIS). The results indicate that the prepared samples have ordered olivine structure and doping of the low concentration Ti^(4+) does not affect the structure of the samples. The electrochemical capabilities evaluated by charge-discharge test show that the sample with 1% Ti^(4+) (molar fraction) has good electrochemical performance delivering about an initial specific capacity of 146.7 mA·h/g at 0.3C rate. Electrochemical impedance spectroscopy measurement results show that the charge transfer resistance of the sample could be decreased greatly by doping an appropriate amount Ti^(4+).

Dual modification of LiNi_(0.83)Co_(0.11)Mn_(0.06)O_(2) cathode materials by K^(+) doping and Li_(3)PO_(4) coating for lithium ions batteries

Li_(3)PO_(4)@Li_(0.99)K_(0.01)Ni_(0.83)Co_(0.11)Mn_(O.06)O_(2)(NCM-KP) cathode powders are synthesized via K^(+)doping in calcination processes and H_3PO_4 coating in sol-gel processes.K^(+) precisely enters into the lattice to widen the(003) plane to 0.4746 nm with a lower cationic disordered degree of 1.87%.Moreover,the surface residual lithium salts are treated by H_3PO_4 to generate a uniform Li_(3)PO_(4) coating layer of approximately 11.41 nm,which completely covers on the surface of secondary spherical particles to improve the interfacial stability.At 25℃,the NCM-KP electrode delivers a discharge specific capacity of 148.9 mAh·g^(-1) with a remarkable capacity retention ratio of 84.1% after 200 cycles at 1.0C and retains a high reversible specific capacity of 154.4 mAh·g^(-1) at 5.0C.Even at 1.0C and 60℃,it can maintain a reversible discharge specific capacity of 114.6 mAh·g^(-1) with 0.21% of capacity decay per cycle after 200 cycles,which is significantly lower than 0.40% for the pristine NCM powders.Importantly,the charge transfer resistance of 238.89 Ω for the NCM-KP electrode is significantly lower than 947.41 Ω for the pristine NCM one by restricting the interfacial side reactions.Therefore,combining K+doping and Li_(3)PO_(4) coating is an effective strategy to enable the significant improvement of the electrochemical property of high-nickel cathode materials,which may be mainly attributed to the widened diffusion pathway and the formed Li_(3)PO_(4) protective layer,thus promoting Li~+diffusion rate and preventing the erosion of HF.

Rare Earth Elements-Doped LiCoO_2 Cathode Material for Lithium-Ion Batteries

Some compounds of LiCo 1- x RE x O 2 (RE=rare earth elements and x =0.01～0.03) were prepared by doping rare earth elements to LiCoO 2 via solid state synthesis. The microstructure characteristics of the LiCo 1- x RE x O 2 were investigated by XRD. It was found that the lattice parameters c are increased and the lattice volumes are enlarged compared to that of LiCoO 2. Moreover, the performance of LiCo 1- x RE x O 2 as the cathode material in lithium ion battery is improved, especially LiCo 1- x Y x O 2 and LiCo 1- x La x O 2. The initial charge/discharge capacities of LiCo 0.99 Y 0.01 O 2 and LiCo 0.99 La 0.01 O 2 are 174/154 (mAh·g -1 ) and 159/149 (mAh·g -1 ) respectively, while those for LiCoO 2 working in the same way are only 139/131 (mAh·g -1 ).

Regeneration of Al-doped LiNi_(0.5)Co_(0.2)Mn_(0.3)O_(2) cathode material by simulated hydrometallurgy leachate of spent lithium-ion batteries

A uniform Al-doped LiNi_(0.5)Co_(0.2)Mn_(0.3)O_(2) cathode material was prepared using a coprecipitation method to take advantage of the positive effect of Al on regenerated NCM(Ni,Co,Mn)cathode materials and ameliorate cumbersome and high-cost impurity removal processes during lithium-ion battery recycling.When the Al^(3+) content in the leachate was 1 at.%with respect to the total amount of transition metals(Ni,Co,and Mn),the produced Al-doped NCM cathode material increased concentrations of lattice oxygen and Ni^(2+).The initial specific capacity at 0.1C was 167.4 mA·h/g,with a capacity retention of 79.1%after 400 cycles at 1C.Further,this Al-doped sample showed improved rate performance and a smaller electrochemical impedance.These findings provide a reference for developing industrial processes to resynthesize cathode materials with improved electrochemical performance by incorporating Al^(3+) impurities produced during lithium-ion battery recycling.

Synthesis and characterization of spinel Li_(1.05)Cr_(0.1)Mn_(1.9)O_(4-z)F_z as cathode materials for lithium-ion batteries

Samples with the nominal stoichiometry Li1.05Cr0.1Mn1.9O4-zFz（z=0,0.05,0.1,0.15,and 0.2） were synthesized via the solid-state reaction method and characterized by X-ray powder diffraction（XRD）,scanning electron microscopy（SEM）,galvanostatic charge/discharge, and slow rate cyclic voltammetry（SSCV） techniques.The results show that the pure spinel phase indexed to Fd3m can be obtained when z=0, 0.05,and 0.1.The substitution of F for O with z≤0.1 contributes to the increase of initial capacity compared with Li1.05Cr0.1Mn1.9O4 spinels. However,when the F-dopant content is designed to be 0.15 and 0.2,the Li1.05Cr0.1Mn1.9O4-zFZ samples deliver relatively low capacity and poor cycling properties at 55℃.

Ribbon-like Cu doped V6O13 as Cathode Material for High-performance Lithium Ion Batteries

Ribbon-like Cu doped V6O（13） was synthesized via a simple solvothermal approach followed by heat treatment in air.As an cathode material for lithium ion battery,the ribbon-like Cu doped V6O（13 ）electrode exhibited good capacity retention with a reversible capacity of over 313 m Ah·g^-1 for up to 50 cycles at 0.1C,as well as a high charge capacity of 306 m Ah·g^-1 at a high current rate of 1 C,in comparison to undoped V6O（13 ）electrode（267 m Ah·g^-1 at 0.1C and 273 m Ah·g^-1 at 1 C）.The high rate capability and better cycleability of the doped electrode can be attributed to the influence of the Cu ions on the mophology and the electronic conductivity of V6O（13） during the lithiation and delithiation process.

Structure and electrochemical properties of LiLa_xMn_(2-x)O_4 cathode material by the ultrasonic-assisted sol-gel method

Powders of spinel LiLaxMn2-xO4 were successfully synthesized by the ultrasonic-assisted sol-gel （UASG） method. The structure and properties of LiLaxMn2-xO4 were examined by X-ray diffraction （XRD）, Fourier transform infrared （FT-IR） spectroscopy, scanning electronic microscopy （SEM）, galvanostatic charge-discharge test, and cyclic voltammetry （CV）. XRD results show that the La^3＋ can partially reptace Mn^3＋ in the spinel and the doped materials with La^3＋ have a larger lattice constant compared with pristine LiMn2O4. FT-IR indicates that the absorption peak of Mn^3＋-O and Mn^4＋- O bonds has a red and blue shift with the increase of doping lanthanum in LiLaxMn2-xO4, respectively. The charge-discharge test exhibits that the initial discharge capacity of LiLaxMn2-xO4 drops off, and the capacity retention increases gradually at C/5 discharge rate with the increase of doping lanthanum, and LiLa0.01Mn1.99O4 has a higher discharge capacity and a better cycling performance at 1C discharge rate. CV reveals that the doping La^3＋ is beneficial to the reversible extraction and intercalation of Li^＋ ions.

Optimum Preparation Conditions of LiNi_(0.8)Co_(0.2)O_2 and LiNi_(0.95)Ce_(0.05)O_2 as Lithium-Ion Battery Cathode Materials

The preparation of LiNi_(0.8)Co_(0.2)O_2 was discussed by the multiply sintering method for solid reaction, in which the sintered material was smashed, ground and pelletted between two successive sintering steps. The optimum technological condition was obtained through orthogonal experiments by L_9(3~4) and DTA analysis. The result indicates that the factors of effecting the electrochemical properties of synthesized LiNi_(0.8)Co_(0.2)O_2 are molar ratio of Li/Ni/Co, oxygen pressure, homothermal time, the final sintering temperature in turn according to its importance. The oxygen pressure is reviewed independently and the technological condition is further optimized. With the same method, rare earth element Ce was studied as substitute element of Co and the cathode material of LiNi_(0.95)Ce_(0.05)O_2 with excellent electrochemical properties was prepared. The electrochemical testing results of LiNi_(0.8)Co_(0.2)O_2 and LiNi_(0.95)Ce_(0.05)O_2 experimental batteries show that discharge capacities of them reach 165 and 148 mAh·g^(-1) respectively and the persistence is more than 9 h at 3.7 V.

Synthesis and electrochemical properties of Li_(1-x)V_xCr_yFe_(1-x)PO_4/C as a cathode material

Composites Li1-xVxCryFe1-yPO4/C（x=0.01, 0.02; y = 0.01, 0.02） were synthesized by solid-state reaction method. The influence of the content of doping vanadium and chromium on the structure of Li1-xVxCryFe1-yPO4/C was investigated by XRD, while the morphology of powders was observed by SEM. The investigation of the electrochemical performances showed that the Li0.99V0.01Cr0.02Fe0.98PO4/C material has a higher capacity. At 0.1 C discharging rate, it is capable of delivering reversible specific capacity of 163.8 mAh/g with fairly stable cycleability.

Synthesis and Characterization of Li_(1.05)Co_(0.3)Ni_(0.35)Mn_(0.3)M_(0.05)O_2(M=Ge,Sn)Cathode Materials for Lithium Ion Battery

In order to improve the electrochemical performance and thermal stability of Li1.05Co1/3Nil/3Mnl/302 materials, Lil.05CO0.3 Ni0.35Mno.3Mo.0502（M=Ge,Sn） cathode materials were synthesized via co-precipitation method. The structure, electrochemical performance and thermal stability were characterized by X-ray diffraction（XRD）, charge/discharge cycling, cyclic voltammetry（CV）, electrochemical impedance spectroscopy（EIS） and differential scanning calorimetry（DSC）. ESEM showed that Sn-doped and Ge- doped slightly increased the size of grains. XRD and CV showed that Sn-doped and Ge-doped powders were homogeneous and had the better layered structure than the bare one. Sn-doped and Ge-doped improved high rate discharge capacity and cycle-life performance. The reason of the better cycling performance of the doped one was the increasing of lithium-ion diffusion rate and charge transfer rate. Sn-doped and Ge-doped also improved the mateials thermal stability.

Synthesis and electrochemical properties of Al-doped LiVPO_4F cathode materials for lithium-ion batteries

Al-doped LiVPO4F cathode materials LiAlxV1-xPO4F were prepared by two-step reactions based on a car-bothermal reduction （CTR） process. The properties of the Al-doped LiVPO4F were investigated by X-ray diffraction （XRD）,scanning electron microscopy （SEM）,and electrochemical measurements. XRD studies show that the Al-doped LiVPO4F has the same triclinic structure （space group p-↑1 ） as the undoped LiVPO4F. The SEM images exhibit that the particle size of Al-doped LiVPO4F is smaller than that of the undoped LiVPO4F and that the smallest particle size is only about 1 μm. The Al-doped LiVPO4F was evaluated as a cathode material for secondary lithium batteries,and exhibited an improved reversibility and cycleability,which may be attributed to the addition of Al^3＋ ion by stabilizing the triclinic structure.

Preparation and electrochemical properties of Y-doped Li_3V_2(PO_4)_3 cathode materials for lithium batteries

Y-doped Li3V2（PO4）3 cathode materials were prepared by a carbothermal reduction（CTR） process.The properties of the Y-doped Li3V2（PO4）3 were investigated by X-ray diffraction（XRD） and electrochemical measurements.XRD studies showed that the Y-doped Li3V2（PO4）3 had the same monoclinic structure as the undoped Li3V2（PO4）3.The Y-doped Li3V2（PO4）3 samples were investigated on the Li extraction/insertion performances through charge/discharge, cyclic voltammogram（CV）, and electrochemical impedance spectra（EIS）.The optimal doping content of Y was x=0.03 in Li3V2-xYx（PO4）3 system.The Y-doped Li3V2（PO4）3 samples showed a better cyclic ability.The electrode reaction reversibility was enhanced, and the charge transfer resistance was decreased through the Y-doping.The improved electrochemical perormances of the Y-doped Li3V2（PO4）3 cathode materials were attributed to the addition of Y3＋ ion by stabilizing the monoclinic structure.

Synthesis and electrochemical characterization of LiNi_(0.78)Co_(0.2)Al_(0.02)O_2 cathode material in a novel co-precipitation method

LiNi0.78 Co0.2 Al0.02O2 cathode materials were prepared with a novel co-precipitation method followed by heat-treating. The properties of the materials were characterized. XRD patterns showed that no secondary phase appeared and the hexagonal lattice parameter c of LiNi0.rsCoo.2AI^0202 was larger than that of LiNi0.8Co0.2O2. The SEM images indicated that the powders of the material were submicron size. The results of the ICP-AES analysis proved that elemental compositions of the material were similar to those of the targeted one. Cyclic voltammetry （3.0- 4. 2 V） illustrated that the new material had good lithium-ion intercalation/de-intercalation performance. The results of galvanostatic cycling showed that the initial specific discharge capacity of the prepared material was 181.4 mAh/g, and the specific discharge capacity was 177.3 mAh/g after 100 cycles （0. 2C, 3.0 - 4. 2 V, vs. Li^＋/Li） with the capacity retention ratio of 97.7%.