Characteristics of Cationic Red X-GRL Adsorption by Diatomite Tailings

As secondary mineral resources, diatomite tailings（DT） got from the Linjiang region of China were prepared and characterized by SEM, XRF and XRD. Mono-factor experiments were carried out to investigate the effects of the operation factor, including contact time, adsorbent concentration, initial p H value of the dye solutions, adsorption temperature and initial concentration of cationic Red X-GRL（X-GRL） on the adsorption of X-GRL. The adsorption kinetics, isotherms, thermodynamics and mechanisms for X-GRL were also studied. It was efficient for DT to adsorb X-GRL from aqueous solutions, and it was even discovered to have higher adsorptivity for X-GRL than diatomite concentrate（DC） in our previous test. The adsorption processes fit very well with the pseudo-second-order model and the Langmuir isotherm equation. In addition, various thermodynamic parameters, such as standard Gibbs free energy（ΔG°）, standard enthalpy（ΔH°） and standard entropy（ΔS°） have been calculated. From thermodynamic studies, it was seen that the adsorption was spontaneous and endothermic. The main driving forces of the physical adsorption on DT are electrostatic attraction. The reason why DT showed higher adsorptivity for X-GRL than DC was that there were more clay mineral particles within, which has a remarkable ability of dye adsorption due to its high surface area. DT as a cheap absorbent for X-GRL removal would replace or partially replace the activated carbon.

Recyclable hydrolyzed polymers of intrinsic microporosity-1/Fe_(3)O_(4) magnetic composites as adsorbents for selective cationic dye adsorption

Polymers of intrinsic microporosity shows great potential for dye adsorption and magnetic Fe_(3)O_(4) are easy to be separated.In this work,hydrolyzed polymers of intrinsic microporosity-1/Fe_(3)O_(4) composite adsorbents were prepared by phase inversion and hydrolysis process for cationic dye adsorption.The chemical structure and morphology of the composite adsorbents were systematically characterized by several characterization methods.Using methylene blue as the target dye,the influences of solution pH,contact time,initial dye concentration,and system temperature on the methylene blue adsorption process were investigated.The incorporation of Fe_(3)O_(4) particle into hydrolyzed polymers of intrinsic microporosity-1 endow the adsorbent with high magnetic saturation(20.7 emu·g^(–1))which allows the rapid separation of the adsorbent.Furthermore,the adsorption process was simulated by adsorption kinetics,isotherms and thermodynamics to gain insight onto the intrinsic adsorption mechanism.In addition,the composite adsorbents are able to selectively adsorb cationic dyes from mixed dyes solution.Hydrolyzed polymers of intrinsic microporosity/Fe_(3)O_(4) shows only a slight decrease for methylene blue adsorption after 10 adsorption/regeneration cycles,demonstrating the outstanding regeneration performance.The high adsorption capacity,outstanding regeneration ability,together with simple preparation method,endow the composite adsorbents great potential for selective removal of cationic dyes in wastewater system.

Influence of Na^+,K^+,Mg^(2+),Ca^(2+),and Fe^(3+) on filterability and settleability of drilling sludge

Solid–liquid separation is a vital step in drilling sludge disposal, and the filterability and settleability of drilling sludge are the main evaluating indicators for the separation process. The influence of Na^+,K^+,Mg^(2+),Ca^(2+),and Fe^(3+) on drilling sludge filterability and settleability was investigated in our research. The water content,filtration rate, supernatant volume and supernatant turbidity were measured to evaluate the filterability and settleability of drilling sludge. Meanwhile, the zeta potential, specific surface area of sludge flocs, particle size distribution and Fourier-transformed infrared spectra were employed to clarify the influencing mechanism.The experimental results showed that the filterability and settleability of drilling sludge were related to concentration and types of cations. Mg^(2+),Ca^(2+),and Fe^(3+) performed better than Na^+, K^+, and the cations with smaller hydrated radius got superior solid–liquid separation behavior at same valence. Finally, the spectra indicated that no chemical adsorption occurred between inorganic cations and drilling sludge flocs. The variation of surface charge and flocs growth after adding different inorganic cations were the reasons for the changes of the filterability and settleability.

Adsorption of cationic copolymer nanoparticles onto bamboo fiber surfaces measured by conductometric titration

Monosized nanoparticles of 57.3 nm were prepared by cationic emulsion polymerization using a polymerizable emulsifier DMHB.The adsorption of nanoparticles onto bamboo fibers was measured by conductometric titration.The results indicated that the adsorption capacity increased with increasing contact time until 120 min.The equilibrium data for nanoparticles adsorption onto bamboo fibers were well fitted to the Langmuir equation.Moreover,the monolayer adsorption capacity of nanoparticles in the concentration range（from 0.03 g/L to 0.6 g/L） studied,as calculated from Langmuir isotherm model at 25 C,was found to be 38.61 mg/g of fibers.The SEM images showed that the nanoparticles form a uniform monolayer on bamboo fiber surfaces.

Effects of bile salts and divalent cations on the adsorption of norfloxacin by agricultural soils

The effects of bile salts （sodium cholate and sodium deoxycholate, 0-20 mmol/L）, divalent cations （Ca^2＋, Mg^2＋, Cu^2＋ and Zn^2＋, 0-20 mmol/L） or pH （3.0-10.0） on the adsorption of norfloxacin by three selected soils （Paddy_H, Paddy_G and Red_J） were systematically studied. Soil adsorption of norfloxacin follows a pseudo second-order kinetics model, and the maximum adsorption capacity has been determined from the nonlinear fit of the Langmuir isotherm model to be 88.8, 88.1 and 63.0 μmol/g for the adsorption onto Paddy_H, Paddy_G and Red_J, respectively. The results indicate that norfloxacin has a high adsorption affinity for the agricultural soils tested and that the organic content of these soils have at least a slight influence on this adsorption. The adsorption of norfloxacin to soils was strongly dependent on pH and exhibited a maximum at approximately pH 6. The presence of divalent cations prominently suppressed the adsorption of norfloxacin by paddy soils, which followed an order of Cu^2＋ 〉 Mg^2＋ 〉 Ca^2＋ 〉 Zn^2＋, and by red soil, which followed an order of Cu^2＋ 〉 Zn^2＋ 〉 Ca^2＋ 〉 Mg^2＋. The adsorption of norfloxacin （by the soils studied） sharply decreased as the amount of bile salts was increased. For uncharged norfloxacin at environmentally relevant pH values, such factors as soil type, exogenous divalent cations and macromolecules significantly altered the environmental fate and transport of norfloxacin between aquatic and soil interfaces.

Chemical characteristics and water stability evaluation of groundwater in the CKDu Zone of Sri Lanka

Groundwater is the main source of drinking water for the rural population in the chronic kidney disease of unknown etiology(CKDu)zone of the North Central Province(NCP)in Sri Lanka.In this study,a total of 334 groundwater samples(311 dug wells,21 tube wells and 2 springs)during the wet season from two aquifers in the NCP were collected,and inves-tigated their chemical characteristics and evaluate their water quality,including ground-water chemistry,main ion sources,the corrosion and scaling potential of groundwater.The results showed that the two hydrochemical types of groundwater in the NCP were mainly of the Ca-HCO_(3),Na·Ca-HCO_(3)types,with the main HCO_(3)−,Na^(+)and Ca^(2+)ions in both types of groundwater originating from silicate and evaporite salt dissolution and influenced by alternating cation adsorption,while the presence of NO_(3)−was mainly anthropogenic.Eval-uation ofwater stability using namely Langelier saturation index(LSI),Ryznar stability index(RSI),Puckorius scaling index(PSI)and Larson-Skold index(LS),indicated that most ground-water presents corrosion potential and has corrosion behavior tendency of metals to some degrees.The water quality of Polonnaruwa was better than that of Anuradhapura in the NCP,and when the groundwater was worse than the“good”grade,which must be properly treated before it is used as drinking water.

Adsorption of chlorophenols from aqueous solutions by pristine and surface functionalized single-walled carbon nanotubes

The adsorption of six kinds of chlorophenols on pristine, hydroxylated and carboxylated single-walled carbon nanotubes（SWCNTs） has been investigated. Pseudo-first order and pseudo-second order models were used to describe the kinetic data. All adsorption isotherms were well fitted with Langmuir, Freundlich and Polanyi–Manes models, due to surface adsorption dominating the adsorption process. The close linear relationship between log Kowand log Kdsuggested that hydrophobicity played an important role in the adsorption. The SWCNTs＇ adsorption capacity for chlorophenols was weakened by addition of oxygen-containing functional groups on the surface, due to the loss of specific surface area, the increase of hydrophilicity and the reduction of π–π interaction. The best adsorption capacity of pristine SWCNTs, SWCNT-OH and SWCNT-COOH for six chlorophenols varied from 19 to 84 mg/g, from 19 to 65 mg/g and from 17 to 65 mg/g,respectively. The effect of pH on the adsorption of 2,6-dichlorophenol（2,6-DCP）, was also studied. When p H is over the pK aof 2,6-dichlorophenol（2,6-DCP）, its removal dropped sharply. When ionic strength increased（Na Cl or KCl concentration from 0 to 0.02 mmol/L）,the adsorption capacity of 2,6-DCP on pristine SWCNTs decreased slightly. The comparison of chlorophenols adsorption by SWCNTs, MWCNTs and PAC was made, indicating that the adsorption rate of CNTs was much faster than that of PAC. The results provide useful information about the feasibility of SWCNTs as an adsorbent to remove chlorophenols from aqueous solutions.