Fabrication of UV-Curing Linalool-Polysiloxane Hybrid Films with High Refractive Index and Transparency

In this article,a series of high refractive indices(1.50-1.53)thiol phenyl polysiloxane(TPS)were synthesized via hydrolytic sol-gel reaction.The Fourier transform infrared spectra(FT-IR)and nuclear magnetic resonance spectra(NMR)results showed that TPS conformed to the predicted structures.Natural terpene linalool was exploited as photocrosslinker to fabricate UV-curing linalool-polysiloxane hybrid films(LPH)with TPS via photoinitiated thiol-ene reaction.LPH rapidly cured under UV irradiation at the intensity of 80 mW/cm^(2) in 30 s,exhibiting good UV-curing properties.The optical transmittance of LPH in the wavelength of 300-800 nm was over 90%,exhibiting good optical transparency.The water contact angle and water vapor permeability results showed that the introduction of phenyl groups enhance the hydrophobicity and water vapor barrier properties of LPH.The results indicated the potential of LPHs in the applications of optical functional coatings.

Enabling an Inorganic-Rich Interface via Cationic Surfactant for High-Performance Lithium Metal Batteries

An anion-rich electric double layer(EDL)region is favorable for fabricating an inorganic-rich solid-electrolyte interphase(SEI)towards stable lithium metal anode in ester electrolyte.Herein,cetyltrimethylammonium bromide(CTAB),a cationic surfactant,is adopted to draw more anions into EDL by ionic interactions that shield the repelling force on anions during lithium plating.In situ electrochemical surface-enhanced Raman spectroscopy results combined with molecular dynamics simulations validate the enrichment of NO_(3)^(−)/FSI−anions in the EDL region due to the positively charged CTA^(+).In-depth analysis of SEI structure by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry results confirmed the formation of the inorganic-rich SEI,which helps improve the kinetics of Li^(+)transfer,lower the charge transfer activation energy,and homogenize Li deposition.As a result,the Li||Li symmetric cell in the designed electrolyte displays a prolongated cycling time from 500 to 1300 h compared to that in the blank electrolyte at 0.5 mA cm^(-2) with a capacity of 1 mAh cm^(-2).Moreover,Li||LiFePO_(4) and Li||LiCoO_(2) with a high cathode mass loading of>10 mg cm^(-2) can be stably cycled over 180 cycles.

Fabrication and Properties of a New Reactive Diluent for Cationic UV Curing

The reactive diluent prepared by siloxane modified Trimethylene oxide can improve the performance of the UV curing system.Therefore,1,7-bis[(3-ethyl-3-methoxyoxacylobutane)propyl]octadecylosiloxane(BEMOPOMTS)was synthesized from diethyl carbonate,trimethylopropanes,allyl bromide,and 1,1,3,3,5,5,7,7-octadecylosiloxane as the main raw materials.BEMOPOMTS can be used as reactive diluents in the field of cationic UV curing.It has good thermal stability,and the addition of BEMOPOMTS significantly improves the tensile strength and elongation at break of epoxy resin.Compared with the pure epoxy resin,adding 20%BEMOPOMTS increased the elastic modulus by 25%to 677 MPa.

Cationic ordering transition in oxygen-redox layered oxide cathodes

Understanding the structural origin of the competition between oxygen 2p and transition-metal 3d orbitals in oxygen-redox(OR)layered oxides is eminently desirable for exploring reversible and high-energy-density Li/Na-ion cathodes.Here,we reveal the correlation between cationic ordering transition and OR degradation in ribbon-ordered P3-Na_(0.6)Li_(0.2)Mn_(0.8)O_(2) via in situ structural analysis.Comparing two different voltage windows,the OR capacity can be improved approximately twofold when suppressing the in-plane cationic ordering transition.We find that the intralayer cationic migration is promoted by electrochemical reduction from Mn^(4+)to Jahn–Teller Mn^(3+)and the concomitant NaO_(6) stacking transformation from triangular prisms to octahedra,resulting in the loss of ribbon ordering and electrochemical decay.First-principles calculations reveal that Mn^(4+)/Mn^(3+)charge ordering and alignment of the degenerate eg orbital induce lattice-level collective Jahn–Teller distortion,which favors intralayer Mn-ion migration and thereby accelerates OR degradation.These findings unravel the relationship between in-plane cationic ordering and OR reversibility and highlight the importance of superstructure protection for the rational design of reversible OR-active layered oxide cathodes.

A novel cationic collector for silicon removal from collophane using reverse flotation under acidic conditions

We analyzed a novel cationic collector using chemical plant byproducts,such as cetyltrimethylammonium bromide(CTAB)and dibutyl phthalate(DBP).Our aim is to establish a highly effective and economical process for the removal of quartz from collophane.A microflotation test with a 25 mg·L^(−1)collector at pH value of 6-10 demonstrates a considerable difference in the floatability of pure quartz and fluorapatite.Flotation tests for a collophane sample subjected to the first reverse flotation for magnesium removal demonstrates that a rough flotation process(using a 0.4 kg·t−1 new collector at pH=6)results in a collophane concentrate with 29.33wt%P_(2)O_(5)grade and 12.66wt%SiO2 at a 79.69wt%P_(2)O_(5)recovery,providing desirable results.Mechanism studies using Fourier transform infrared spectroscopy,zeta potential,and contact angle measurements show that the adsorption capacity of the new collector for quartz is higher than that for fluorapatite.The synergistic effect of DBP increases the difference in hydrophobicity between quartz and fluorapatite.The maximum defoaming rate of the novel cationic collector reaches 142.8 mL·min−1.This is considerably higher than that of a conventional cationic collector.

One-step crosslinking preparation of tannic acid particles for the adsorption and separation of cationic dyes

In this study,a new tannic acid adsorbent(ethylene glycol diglycidyl ether crosslinked tannic acid,TAEGDE)for adsorptive removal of dyes from water was prepared using EGDE as a cross-linking agent.The resultant TA-EGDE was in particulate form with rough surface morphology and a diameter ranging from 10 to 30μm.The adsorption performance of the TA-EGDE was evaluated in a flow-through mode using water samples contaminated with methylene blue(MB)and two-component mixed dyes,respectively.The TA-EGDE provided adsorption capacity up to 721.8 mg·g^(-1)at 65°C for MB.It showed a high removal efficiency(99%)of MB(50 mg·L^(-1))from the water sample and could recovery 90%of the adsorbed MB by eluting with acidic ethanol aqueous solution.The excellent adsorption of MB and neutral red on the TA-EGDE may be the result of the synergy of electrostatic interaction andπ-πinteraction.Furthermore,the TA-EGDE could separate dyes from water samples contaminated with twocomponent mixed dyes with a separation coefficient ranging from 1.8 to 36.5.The anionic TA-EGDE would be an effective adsorbent to remove and recycle dyes from the contaminated water.

Divalent nitrogen-rich cationic salts with great gas production capacities

Monocyclic nitrogen-rich 3-(aminomethyl)-4,5-diamine-1,2,4-triazole(1)and fused cyclic 3,7-diamine-6-(aminomethyl)-[1,2,4]triazolo[4,3-b][1,2,4]triazole(9)were synthesized through the convenient cyclization reaction from the readily available reactant.Their energetic salts with high nitrogen content were proved to be rare examples of divalent monocyclic/fused cyclic cationic salts according to the single crystal analyses.The structure of intermediate B was also identified and verified by its trivalent cation crystal 17.5H_2O indirectly.Energetic compounds 2-8 and 10-17 were fully characterized by NMR spectroscopy,infrared spectroscopy,differential scanning calorimetry,elemental analysis.These energetic salts exhibit good thermal stability with decomposition temperatures ranged from 182℃to 245℃.The sensitivity of compounds 2,6,10 and 14 is similar or superior to that of RDX while the others were much more insensitive to mechanical stimulate.Furthermore,detonation velocity of 10(8843 m/s)surpass that of RDX(D=8795 m/s).Considering the high gas production volume(≥808 L/kg)of 2,4,10and 12,constant-volume combustion experiments were conduct to evaluate their gas production capacities specifically.These compounds possess much higher maximum gas-production pressures(P_(max):7.88-10.08 MPa)than the commonly used reagent guanidine nitrate(GN:P_(max)=4.20 MPa),which indicate their strong gas production capacity.

Cation effects in electrocatalytic reduction reactions:Recent advances

Electrocatalytic reduction reactions,powered by clean energy sources such as solar energy and wind,offer a sustainable method for converting inexpensive feedstocks(e.g.,CO_(2),N_(2)/NO_(x),organics,and O_(2))into high-value-added chemicals or fuels.The design and modification of electrocatalysts have been widely implemented to improve their performance in these reactions.However,bottle-necks are encountered,making it challenging to further improve performance through catalyst development alone.Recently,cations in the electrolyte have emerged as critical factors for tuning both the activity and product selectivity of reduction reactions.This review summarizes recent advances in understanding the role of cation effects in electrocatalytic reduction reactions.First,we introduce the mechanisms underlying cation effects.We then provide a comprehensive overview of their application in electroreduction reactions.Characterization techniques and theoretical calcula-tion methods for studying cation effects are also discussed.Finally,we address remaining challeng-es and future perspectives in this field.We hope that this review offers fundamental insights and design guidance for utilizing cation effects,thereby advancing their development.

Waste acid recovery utilizing monovalent cation permselective membranes through selective electrodialysis

Selective electrodialysis(SED)has surfaced as a highly promising membrane separation technique in the realm of acid recovery owing to its ability to effectively separate monovalent ions through the utilization of a potential difference.However,the current SED process is limited by conventional commercial monovalent cation permselective membranes(MCPMs).This study systematically investigates the use of an independently developed MCPM in the SED process for acid recovery.Various factors such as current density,volume ratio,initial ion concentration,and waste acid systems are considered.The independently developed MCPM offers several advantages over the commercial monovalent selective cation-exchange membrane(CIMS),including higher recovered acid concentration,better ion flux ratio,improved acid recovery efficiency,increased recovered acid purity,and higher current efficiency.The SED process with the MCPM achieves a recovered acid of 95.9%and a concentration of 2.3 mol·L^(–1) in the HCl/FeCl_(2) system,when a current density of 20 mA·cm^(-2) and a volume ratio of 1:2 are applied.Similarly,in the H_(2)SO_(4)/FeSO_(4) system,a purity of over 99%and a concentration of 2.1 mol·L^(–1) can be achieved in the recovered acid.This study thoroughly examines the impact of operation conditions on acid recovery performance in the SED process.The independently developed MCPM demonstrates outstanding acid recovery performance,highlighting its potential for future commercial utilization.

Lithium cation-doped tungsten oxide as a bidirectional nanocatalyst for lithium-sulfur batteries with high areal capacity

Lithium-sulfur(Li-S) batteries are promising for high energy-storage applications but suffer from sluggish conversion reaction kinetics and substantial lithium sulfide(Li_(2)S) oxidation barrier,especially under high sulfur loadings.Here,we report a Li cation-doped tungsten oxide(Li_(x)WO_(x)) electrocatalyst that efficiently accelerates the S■HLi_(2)S interconversion kinetics.The incorporation of Li dopants into WO_(x) cationic vacancies enables bidirectional electrocatalytic activity for both polysulfide reduction and Li_(2)S oxidation,along with enhanced Li^(+) diffusion.In conjunction with theoretical calculations,it is discovered that the improved electrocatalytic activity originates from the Li dopant-induced geometric and electronic structural optimization of the Li_(x)WO_(x),which promotes the anchoring of sulfur species at favourable adsorption sites while facilitating the charge transfer kinetics.Consequently,Li-S cells with the Li_(x)WO_(x) bidirectional electrocatalyst show stable cycling performance and high sulfur utilization under high sulfur loadings.Our approach provides insights into cation engineering as an effective electrocatalyst design strategy for advancing high-performance Li-S batteries.

Exploring the Cation Regulation Mechanism for Interfacial Water Involved in the Hydrogen Evolution Reaction by In Situ Raman Spectroscopy

Interfacial water molecules are the most important participants in the hydrogen evolution reaction(HER).Hence,understanding the behavior and role that interfacial water plays will ultimately reveal the HER mechanism.Unfortunately,investigating interfacial water is extremely challenging owing to the interference caused by bulk water molecules and complexity of the interfacial environment.Here,the behaviors of interfacial water in different cationic electrolytes on Pd surfaces were investigated by the electrochemistry,in situ core-shell nanostructure enhanced Raman spectroscopy and theoretical simulation techniques.Direct spectral evidence reveals a red shift in the frequency and a decrease in the intensity of interfacial water as the potential is shifted in the positively direction.When comparing the different cation electrolyte systems at a given potential,the frequency of the interfacial water peak increases in the specified order:Li+<Na^(+)<K^(+)<Ca^(2+)<Sr^(2+).The structure of interfacial water was optimized by adjusting the radius,valence,and concentration of cation to form the two-H down structure.This unique interfacial water structure will improve the charge transfer efficiency between the water and electrode further enhancing the HER performance.Therefore,local cation tuning strategies can be used to improve the HER performance by optimizing the interfacial water structure.

Enhancing selectivity in acidic CO_(2) electrolysis:Cation effects and catalyst innovation

The electrochemical reduction of CO_(2)(eCO_(2)R)under ambient conditions is crucial for reducing carbon emissions and achieving carbon neutrality.Despite progress with alkaline and neutral electrolytes,their efficiency is limited by(bi)carbonates formation.Acidic media have emerged as a solution,addressing the(bi)carbonates challenge but introducing the issue of the hydrogen evolu-tion reaction(HER),which reduces CO_(2) conversion efficiency in acidic environments.This review focuses on enhancing the selectivity of acidic CO_(2) electrolysis.It commences with an overview of the latest advancements in acidic CO_(2) electrolysis,focusing on product selectivity and electrocatalytic activity enhancements.It then delves into the critical factors shaping selectivity in acidic CO_(2) electrolysis,with a special emphasis on the influence of cations and catalyst design.Finally,the research challenges and personal perspectives of acidic CO_(2) electrolysis are suggested.

Atomically Adjustable Rhodium Catalyst Synthesis with Outstanding Mass Activity via Surface-Li mi ted Cation Exchange

Rh has been widely studied as a catalyst for the promising hydrazine oxidation reaction that can replace oxygen evolution reactions for boosting hydrogen production from hydrazine-containing wastewater.Despite Rh being expensive,only a few studies have examined its electrocatalytic mass activity.Herein,surface-limited cation exchange and electrochemical activation processes are designed to remarkably enhance the mass activity of Rh.Rh atoms were readily replaced at the Ni sites on the surface of NiOOH electrodes by cation exchange,and the resulting RhOOH compounds were activated by the electrochemical reduction process.The cation exchange-derived Rh catalysts exhibited particle sizes not exceeding 2 nm without agglomeration,indicating a decrease in the number of inactive inner Rh atoms.Consequently,an improved mass activity of 30 A mg_(Rh)^(-1)was achieved at 0.4 V versus reversible hydrogen electrode.Furthermore,the two-electrode system employing the same CE-derived Rh electrodes achieved overall hydrazine splitting over 36 h at a stable low voltage.The proposed surface-limited CE process is an effective method for reducing inactive atoms of expensive noble metal catalysts.

Identification of Mulberry Bacterial Blight Caused by Klebsiella oxytoca in Bazhong,Sichuan,China

To provide a scientific basis for controlling mulberry bacterial blight in Bazhong,Sichuan,China(BSC),this study aimed to isolate and purify pathogenic bacteria from diseased branches of mulberry trees in the region and to clarify their taxonomic status using morphological observation,physiological and biochemical detection,molecular-level identification,and the construction of a phylogenetic tree.A total of 218 bacterial strains were isolated from samples of diseased mulberry branches.Of these,7 strains were identified as pathogenic bacteria based on pathogenicity tests conducted in accordance with Koch’s postulates.Preliminary findings from the analysis of the 16S rRNA sequence indicated that the 7 pathogenic bacteria are members of Klebsiella spp.Morphological observation revealed that the pathogenic bacteria were oval-shaped and had capsules but no spores.They could secrete pectinase,cellulase,and protease and were able to utilize D-glucose,D-mannose,D-maltose,and D-Cellobiose.The 7 strains of pathogenic bacteria exhibited the highest homology with Klebsiella oxytoca.This study identifies Klebsiella oxytoca as the causative agent of mulberry bacterial blight in BSC,laying the foundation for the prevention and control of this pathogen and further investigation into its pathogenic mechanism.

Application of Transgenic Technology in Identification for Gene Function on Grasses

Perennial grasses have developed intricate mechanisms to adapt to diverse environments,enabling their resistance to various biotic and abiotic stressors.These mechanisms arise from strong natural selection that contributes to enhancing the adaptation of forage plants to various stress conditions.Methods such as antisense RNA technology,CRISPR/Cas9 screening,virus-induced gene silencing,and transgenic technology,are commonly utilized for investigating the stress response functionalities of grass genes in both warm-season and cool-season varieties.This review focuses on the functional identification of stress-resistance genes and regulatory elements in grasses.It synthesizes recent studies on mining functional genes,regulatory genes,and protein kinase-like signaling factors involved in stress responses in grasses.Additionally,the review outlines future research directions,providing theoretical support and references for further exploration of(i)molecular mechanisms underlying grass stress responses,(ii)cultivation and domestication of herbage,(iii)development of high-yield varieties resistant to stress,and(iv)mechanisms and breeding strategies for stress resistance in grasses.

Structural Modal Parameter Recognition and Related Damage Identification Methods under Environmental Excitations: A Review

Modal parameters can accurately characterize the structural dynamic properties and assess the physical state of the structure.Therefore,it is particularly significant to identify the structural modal parameters according to the monitoring data information in the structural health monitoring(SHM)system,so as to provide a scientific basis for structural damage identification and dynamic model modification.In view of this,this paper reviews methods for identifying structural modal parameters under environmental excitation and briefly describes how to identify structural damages based on the derived modal parameters.The paper primarily introduces data-driven modal parameter recognition methods(e.g.,time-domain,frequency-domain,and time-frequency-domain methods,etc.),briefly describes damage identification methods based on the variations of modal parameters(e.g.,natural frequency,modal shapes,and curvature modal shapes,etc.)and modal validation methods(e.g.,Stability Diagram and Modal Assurance Criterion,etc.).The current status of the application of artificial intelligence(AI)methods in the direction of modal parameter recognition and damage identification is further discussed.Based on the pre-vious analysis,the main development trends of structural modal parameter recognition and damage identification methods are given to provide scientific references for the optimized design and functional upgrading of SHM systems.

Flotation of low-grade bauxite using organosilicon cationic collector and starch depressant

The flotation of diaspore and three kinds of silicate minerals, including kaolinite, illite and pyrophyllite, using an organosilicon cationic surfactant (TAS101) as collector and starch as depressant was investigated. The results show that both diaspore and aluminosilicate minerals float readily with organosilicon cationic collector TAS101 at pH values of 4 to 10. Starch has a strong depression effect for diaspore in the alkaline pH region but has little influence on the flotation of aluminosilicate minerals. It is possible to separate diaspore from aluminosilicate minerals using the organosilicon cationic collector and starch depressant. Further studies of bauxite ore flotation were also conducted, and the reverse flotation separation process was adopted. The concentrates with the mass ratio of Al2O3 to SiO2 of 9.58 and Al2O3 recovery of 83.34% are obtained from natural bauxite ore with the mass ratio of Al2O3 to SiO2 of 6.1 at pH value of 11 using the organosilicon cationic collector and starch depressant.

Comparative studies on flotation of aluminosilicate minerals with Gemini cationic surfactants BDDA and EDDA

Gemini quaternary ammonium salt surfactants, butane-a, co-bis（dimethyl dodeculammonium bromide） （BDDA） ethane-a, fl-bis（dimethyl dodeculammonium bromide） （EDDA） were adopted to comparatively study the flotation behaviors of kaolinite, pyrophyllite and illite. It was found that three silicate minerals all exhibited good floatability with Gemini cationic surfactants as collectors over a wide pH range, while BDDA showed a stronger collecting power than EDDA. FTIR spectra and zeta potential analysis indicated that the mechanism of adsorption of Gemini collector molecules on three silicate minerals surfaces was almost identical for the electronic attraction and hydrogen bonds effect. The theoretically obtained results of density functional theory （DFT） at B3LYP/6-31G （d） level demonstrated the stronger collecting power of BDDA presented in the floatation test and zeta potential measurement.

Rheological Behavior of Aqueous Solutions of Cationic Guar in Presence of Oppositely Charged Surfactant

The cationic guar （CG） is synthesized and the rheological behavior of aqueous solutions of CG in the presence of sodium dodecyl sulfate （SDS） is studied in detail. The steady viscosity measurements show that the zero shear viscosity enhancement can be almost 3 orders of magnitude as the concentration of SDS increases from 0 to 0.043%. The gel-like formation is observed as the concentration of SDS is greater than 0.016%. The oscillatory rheological measurements of CG solutions in the presence of SDS show that the crossover modulus is almost independent of the concentration of SDS whereas the apparent relaxation time increases swiftly upon increasing the concentration of SDS. The experimental results indicate that the strength rather than the number of the cross-links is greatly affected by SDS molecules. The mechanism concerning the effect of SDS upon the rheology of CG solutions can be coined by the two-stage model. Before the formation of cross-links at the critical concentration, the electrostatic interaction between SDS and cationic site of CG chains plays a key role and the SDS molecules bind to CG chains through the electrostatic interaction. After the formation of cross-links at the concentration greater than the critical concentration, the cooperative hydrophobic interaction become dominant and SDS molecules bind to the cross-links through the hydrophobic interaction. The theological behavior of aqueous solutions of CG in the presence of SDS is chiefly determined by the micelle-like cross-links between CG chains. In fact, the flow activation energy of CG solution, obtained from the temperature dependence of the apparent relaxation time, falls in the range of transferring a hydrophobic tail of SDS from the micelle to an aqueous environment.

In vitro investigation of RGD-modified stabilized cationic liposomes as non-viral vehicle for siRNA delivery

In this study, the novel RGD-modified stabilized cationic liposomes were developed as the delivery vehicle for siRNA targeting human MDR1 gene. The complex of cationic liposomes and siRNA, RGD-Lipo-siRNA, was prepared with a narrow size distribution below 200 nm. It was shown that the encapsulated siRNA in the liposomes could be effectively protected from serum degradation. Also, enhanced cell binding and intracellular uptake of siRNA in the doxorubicin-resistant human ova- rian cancer cell lines SKOV3/A were found in RGD-Lipo-siRNA preparation as compared to that of unmodified cationic lipsomes （Lipo-siRNA）. Using the post-insertion method for RGD modification, lysosome release of siRNA in pRGD-Lipo-siRNA was improved. From flow cytometry, significant increase of doxorubicin accumulation was observed in the SKOV3/A cells treated with pRGD-Lipo-siRNA targeting human MDR1 gene. In vitro cytotoxicity assay showed that the significant cell growth inhibition was achieved in the SKOV3/A cells after treating with the combined use of siRNA and doxorubicin. In conclusions, postinserted RGD modified lipoplex, pRGD-Lipo-siRNA, was successfully used for siRNA transfection and achieved drug resistance reversal in human ovarian cancer SKOV3/A （doxorubicin-resistant） cells. It suggested that this liposomes might be a potential vehicle for siRNA delivery in vivo.