Comparative analysis of thermodynamic and mechanical responses between underground hydrogen storage and compressed air energy storage in lined rock caverns

Underground hydrogen storage(UHS)and compressed air energy storage(CAES)are two viable largescale energy storage technologies for mitigating the intermittency of wind and solar power.Therefore,it is meaningful to compare the properties of hydrogen and air with typical thermodynamic storage processes.This study employs a multi-physical coupling model to compare the operations of CAES and UHS,integrating gas thermodynamics within caverns,thermal conduction,and mechanical deformation around rock caverns.Gas thermodynamic responses are validated using additional simulations and the field test data.Temperature and pressure variations of air and hydrogen within rock caverns exhibit similarities under both adiabatic and diabatic simulation modes.Hydrogen reaches higher temperature and pressure following gas charging stage compared to air,and the ideal gas assumption may lead to overestimation of gas temperature and pressure.Unlike steel lining of CAES,the sealing layer(fibre-reinforced plastic FRP)in UHS is prone to deformation but can effectively mitigates stress in the sealing layer.In CAES,the first principal stress on the surface of the sealing layer and concrete lining is tensile stress,whereas UHS exhibits compressive stress in the same areas.Our present research can provide references for the selection of energy storage methods.

Global stability coefficient of large underground caverns under static loading and earthquake wave condition

Underground energy and resource development,deep underground energy storage and other projects involve the global stability of multiple interconnected cavern groups under internal and external dynamic disturbances.An evaluation method of the global stability coefficient of underground caverns based on static overload and dynamic overload was proposed.Firstly,the global failure criterion for caverns was defined based on its band connection of plastic-strain between multi-caverns.Then,overloading calculation of the boundary geostress and seismic intensity on the caverns model was carried out,and the critical unstable state of multi-caverns can be identified,if the plastic-strain band appeared between caverns during these overloading processes.Thus,the global stability coefficient for the multi-caverns under static loading and earthquake was obtained based on the corresponding overloading coefficient.Practical analysis for the Yingliangbao(YLB)hydraulic caverns indicated that this method can not only effectively obtain the global stability coefficient of caverns under static and dynamic earthquake conditions,but also identify the caverns’high-risk zone of local instability through localized plastic strain of surrounding rock.This study can provide some reference for the layout design and seismic optimization of underground cavern group.

Large-Scale Carbon Dioxide Storage in Salt Caverns:Evaluation of Operation,Safety,and Potential in China

Underground salt cavern CO_(2) storage(SCCS)offers the dual benefits of enabling extensive CO_(2) storage and facilitating the utilization of CO_(2) resources while contributing the regulation of the carbon market.Its economic and operational advantages over traditional carbon capture,utilization,and storage(CCUS)projects make SCCS a more cost-effective and flexible option.Despite the widespread use of salt caverns for storing various substances,differences exist between SCCS and traditional salt cavern energy storage in terms of gas-tightness,carbon injection,brine extraction control,long-term carbon storage stability,and site selection criteria.These distinctions stem from the unique phase change characteristics of CO_(2) and the application scenarios of SCCS.Therefore,targeted and forward-looking scientific research on SCCS is imperative.This paper introduces the implementation principles and application scenarios of SCCS,emphasizing its connections with carbon emissions,carbon utilization,and renewable energy peak shaving.It delves into the operational characteristics and economic advantages of SCCS compared with other CCUS methods,and addresses associated scientific challenges.In this paper,we establish a pressure equation for carbon injection and brine extraction,that considers the phase change characteristics of CO_(2),and we analyze the pressure during carbon injection.By comparing the viscosities of CO_(2) and other gases,SCCS’s excellent sealing performance is demonstrated.Building on this,we develop a long-term stability evaluation model and associated indices,which analyze the impact of the injection speed and minimum operating pressure on stability.Field countermeasures to ensure stability are proposed.Site selection criteria for SCCS are established,preliminary salt mine sites suitable for SCCS are identified in China,and an initial estimate of achievable carbon storage scale in China is made at over 51.8-77.7 million tons,utilizing only 20%-30%volume of abandoned salt caverns.This paper addresses key scientific and engineering challenges facing SCCS and determines crucial technical parameters,such as the operating pressure,burial depth,and storage scale,and it offers essential guidance for implementing SCCS projects in China.

A preliminary site selection system for underground hydrogen storage in salt caverns and its application in Pingdingshan,China

Large‐scale underground hydrogen storage(UHS)provides a promising method for increasing the role of hydrogen in the process of carbon neutrality and energy transition.Of all the existing storage deposits,salt caverns are recognized as ideal sites for pure hydrogen storage.Evaluation and optimization of site selection for hydrogen storage facilities in salt caverns have become significant issues.In this article,the software CiteSpace is used to analyze and filter hot topics in published research.Based on a detailed classification and analysis,a“four‐factor”model for the site selection of salt cavern hydrogen storage is proposed,encompassing the dynamic demands of hydrogen energy,geological,hydrological,and ground factors of salt mines.Subsequently,20 basic indicators for comprehensive suitability grading of the target site were screened using the analytic hierarchy process and expert survey methods were adopted,which provided a preliminary site selection system for salt cavern hydrogen storage.Ultimately,the developed system was applied for the evaluation of salt cavern hydrogen storage sites in the salt mines of Pingdingshan City,Henan Province,thereby confirming its rationality and effectiveness.This research provides a feasible method and theoretical basis for the site selection of UHS in salt caverns in China.

Rock mass response for lined rock caverns subjected to high internal gas pressure

The storage of hydrogen gas in underground lined rock caverns(LRCs)enables the implementation of the first fossil-free steelmaking process to meet the large demand for crude steel.Predicting the response of rock mass is important to ensure that gas leakage due to rupture of the steel lining does not occur.Analytical and numerical models can be used to estimate the rock mass response to high internal pressure;however,the fitness of these models under different in situ stress conditions and cavern shapes has not been studied.In this paper,the suitability of analytical and numerical models to estimate the maximum cavern wall tangential strain under high internal pressure is studied.The analytical model is derived in detail and finite element(FE)models considering both two-dimensional(2D)and three-dimensional(3D)geometries are presented.These models are verified with field measurements from the LRC in Skallen,southwestern Sweden.The analytical model is inexpensive to implement and gives good results for isotropic in situ stress conditions and large cavern heights.For the case of anisotropic horizontal in situ stresses,as the conditions in Skallen,the 3D FE model is the best approach.

Spalling failure of deep hard rock caverns

Spalling is a typical brittle failure phenomenon of hard rock in deep caverns under high geostress.In this study,key issues are systematically studied concerning the spalling failure of deep hard rock caverns.First,the prismatic rock specimens with small thicknesses(i.e.width×thickness×height:20 mm×50 mm×100 mm)are employed in our tests which not only successfully simulate the spalling failure of hard rock in the laboratory but also obtain a reasonable spalling strength similar to that of the rock mass.Then,a series of spalling experiments is carried out to investigate the mechanism of spalling failure of deep hard rock caverns.Our results show that the intermediate principal stress,weak dynamic disturbances,and rock microstructure have significant effects on the spalling failure.The spalling strength is approximately(0.3–0.8)UCS,where UCS is the uniaxial compressive strength of the cylindrical rock sample with a diameter of around 50 mm.The spalling strength increases first and then decreases with increasing intermediate principal stress.Moreover,an empirical spalling strength criterion and a numerical method of spalling failure are proposed.This numerical method can not only simulate the spalling failure zone formed by tangential compressive stress concentration after excavation under different intermediate principal stresses,but also successfully simulate the failure transition from tensile mode to shear mode associated with confinement change in deep hard rock caverns.Furthermore,an acoustic emission-based early warning method using neural network is proposed to predict the spalling failure.Finally,a technical roadmap for preventing and controlling spalling failure of deep hard rock caverns is presented after summarizing the successful experiences in a typical engineering case.

Determination of convergence of underground gas storage caverns using non-invasive methodology based on land surface subsidence measurement

Undergroundgas storage caverns aremonitoredfor environmental safety in termsof equipmentandpotential emissions,particularly methane emissions from the underground and above-ground parts of the storage facility.Periodical measurements of land surface deformations and costly echometric measurements of convergence of individual storage facilities are carried out.The aims of environmental monitoring are:(1)to eliminate potential hazards in the shortest time,(2)assess the overall impact of intensive operation of storage facilities on the environment,(3)developmonitoringmethods relevant to environmental protection,and(4)take actions in case of failure.The paper presents a solution to the problem of determination of the convergence of underground caverns in a salt rock mass based on the results of land surface subsidence measurements carried out using the Gauss-Markov equalization algorithm.Themethod makes it possible for ongoing control of cavern volume convergence after each subsidence measurement on the ground surface and determining the actual impact of the use frequency(injection-mediumconsumption)on the convergence in time.The presentedmethodology is universal and verified on caverns located in a salt rockmass.The Gauss-Markov inversion model is the first used in this area,hence its application is significant.

Effect of rock joints on lined rock caverns subjected to high internal gaspressure

The storage of hydrogen gas in lined rock caverns(LRCs)may enable the implementation of the firstlarge-scale fossil-free steelmaking process in Sweden,but filling such storage causes joints in the rockmass to open,concentrating strains in the lining.The structural interaction between the LRC componentsmust be able to reduce the strain concentration in the sealing steel lining;however,this interaction iscomplex and difficult to predict with analytical methods.In this paper,the strain concentration in LRCsfrom the opening of rock joints is studied using finite element(FE)analyses,where the large-and small-scale deformation behaviors of the LRC are coupled.The model also includes concrete crack initiation anddevelopment with increasing gas pressure and rock joint width.The interaction between the jointed rockmass and the reinforced concrete,the sliding layer,and the steel lining is demonstrated.The results showthat the rock mass quality and the spacing of the rock joints have the greatest influence on the straindistributions in the steel lining.The largest effect of rock joints on the maximum strains in the steellining was observed for geological conditions of“good”quality rock masses.

Analysis on the Characteristics of Tourism Resources of Tiangui Mountain in Yinhe Karst Caverns of Hebei Province

The tourism resource characteristics of Yinhe karst cave in Tiangui mountain were discussed and the formation term and mechanism of every outstanding sight in the cave were discussed.In the process of empoldering the tourism resource in Tiangui Mountain,the humanities and geoscience tourist resources should be conformed and the variety of travel models were established,such as the sightseeing travel,special features travel,scientific knowledge travel,and so on.

Mechanical response and stability analysis of rock mass in high geostress underground powerhouse caverns subjected to excavation

To investigate the stability of rock mass in high geostress underground powerhouse caverns subjected to excavation,a microseismic(MS)monitoring system was established and the discrete element method(DEM)-based numerical simulation was carried out.The tempo-spatial damage characteristics of rock mass were analyzed.The evolution laws of MS source parameters during the formation of a rock collapse controlled by high geostress and geological structure were investigated.Additionally,a three-dimensional DEM model of the underground powerhouse caverns was built to reveal the deformation characteristics of rock mass.The results indicated that the MS events induced by excavation of high geostress underground powerhouse caverns occurred frequently.The large-stake crown of the main powerhouse was the main damage area.Prior to the rock collapse,the MS event count and accumulated energy release increased rapidly,while the apparent stress sharply increased and then decreased.The amount and proportion of shear and mixed MS events remarkably increased.The maximum displacement was generally located near the spandrel areas.The MS monitoring data and numerical simulation were in good agreement,which can provide significant references for damage evaluation and disaster forecasting in high geostress underground powerhouse caverns.

Characteristics of microseismic b-value associated with rock mass large deformation in underground powerhouse caverns at different stress levels

Rock mass large deformation in underground powerhouse caverns has been a severe hazard in hydropower engineering in Southwest China.During the development of rock mass large deformation,a sequence of fractures was generated that can be monitored using microseismic(MS)monitoring techniques.Two MS monitoring systems were established in two typical underground powerhouse caverns featuring distinct geostress levels.The MS b-values associated with rock mass large deformation and their temporal variation are analysed.The results showed that the MS bvalue in course of rock mass deformation was less than 1.0 in the underground powerhouse caverns at a high stress level while larger than 1.5 at a low stress level.Prior to the rock mass deformation,the MS b-values derived from both the high-stress and low-stress underground powerhouse caverns show an incremental decrease over 10%within 10 d.The results contribute to understanding the fracturing characteristics of MS sources associated with rock mass large deformation and provide a reference for early warning of rock mass large deformation in underground powerhouse caverns.

Measures for controlling large deformations of underground caverns under high in-situ stress condition--A case study of JinpingⅠhydropower station

The Jinping I hydropower station is a huge water conservancy project consisting of the highest concrete arch dam to date in the world and a highly complex and large underground powerhouse cavern. It is located on the right bank with extremely high in-situ stress and a few discontinuities observed in surrounding rock masses. The problems of rock mass deformation and failure result in considerable challenges related to project design and construction and have raised a wide range of concerns in the fields of rock mechanics and engineering. During the excavation of underground caverns, high in-situ stress and relatively low rock mass strength in combination with large excavation dimensions lead to large deformation of the surrounding rock mass and support. Existing experiences in excavation and support cannot deal with the large deformation of rock mass effectively, and further studies are needed. In this paper, the geological conditions, layout of caverns, and design of excavation and support are first introduced, and then detailed analyses of deformation and failure characteristics of rocks are presented. Based on this, the mechanisms of deformation and failure are discussed, and the support adjustments for controlling rock large deformation and subsequent excavation procedures are proposed. Finally, the effectiveness of support and excavation adjustments to maintain the stability of the rock mass is verified. The measures for controlling the large deformation of surrounding rocks enrich the practical experiences related to the design and construction of large underground openings, and the construction of caverns in the Jinping I hydropower station provides a good case study of large-scale excavation in highly stressed ground with complex geological structures, as well as a reference case for research on rock mechanics.

Design and operation problems related to water curtain system forunderground water-sealed oil storage caverns

The underground water-sealed storage technique is critically important and generally accepted for the national energy strategy in China. Although several small underground water-sealed oil storage caverns have been built in China since the 1970s, there is still a lack of experience for large-volume underground storage in complicated geological conditions. The current design concept of water curtain system and the technical instruction for system operation have limitations in maintaining the stability of surrounding rock mass during the construction of the main storage caverns, as well as the long-term stability. Although several large-scale underground oil storage projects are under construction at present in China, the design concepts and construction methods, especially for the water curtain system, are mainly based on the ideal porosity medium flow theory and the experiences gained from the similar projects overseas. The storage projects currently constructed in China have the specific features such as huge scale, large depth, multiple-level arrangement, high seepage pressure, complicated geological conditions, and high in situ stresses, which are the challenging issues for the stability of the storage caverns. Based on years’ experiences obtained from the first large-scale （millions of cubic meters） underground water-sealed oil storage project in China, some design and operation problems related to water curtain system during project construction are discussed. The drawbacks and merits of the water curtain system are also presented. As an example, the conventional concept of “filling joints with water” is widely used in many cases, as a basic concept for the design of the water curtain system, but it is immature. In this paper, the advantages and disadvantages of the conventional concept are pointed out, with respect to the long-term stability as well as the safety of construction of storage caverns. Finally, new concepts and principles for design and construction of the underground water-sealed oil storage caverns are proposed.

The Application of Dynamic Programming in Construction Mechanics of the Group of Caverns

ＴｈｅＡｐｐｌｉｃａｔｉｏｎｏｆＤｙｎａｍｉｃＰｒｏｇｒａｍｍｉｎｇｉｎＣｏｎｓｔｒｕｃｔｉｏｎＭｅｃｈａｎｉｃｓｏｆｔｈｅＧｒｏｕｐｏｆＣａｖｅｒｎｓＢｙＺｈｕＷｅｉｓｈｅｎａｎｄＷａｎｇＰｉｎｇ（ＩｎｓｔｉｔｕｔｅｏｆＲｏｃｋａｎｄＳｏｉｌＭｅｃ...

The Development of Rock Caverns in Hydraulic Engineering of China and the Case History of Lubuge Project

ＴｈｅＤｅｖｅｌｏｐｍｅｎｔｏｆＲｏｃｋＣａｖｅｒｎｓｉｎＨｙｄｒａｕｌｉｃＥｎｇｉｎｅｅｒｉｎｇｏｆＣｈｉｎａａｎｄｔｈｅＣａｓｅＨｉｓｔｏｒｙｏｆＬｕｂｕｇｅＰｒｏｊｅｃｔＢｙＦｕＢｉｎｇｊｕｎ；ＬｉｕＹｏｎｇｘｉｅａｎｄＭａＹａｎｘｕｎ（Ｃｈｉ...

Two-and three-dimensional stability analysis of underground storage caverns in soft rock(Cappadocia, Turkey) by finite element method

Engineering design in soft rocks and its stability analysis exerts many challenges to rock engineers. Many engineering works in Turkey’s Cappadocia region must face and tackle the existing sites covered by the soft rocks. This study is aimed to examine the stability condition of a typical underground storage cavern(USC) excavated in a soft rock in this region. For this purpose, two-and threedimensional stability analyses of the USCs were performed using the finite element method(FEM).Because of the inherent difficulty in characterizing soft/weak rock masses in the region using traditional classification systems, the stability of a typical USC was evaluated by representing the rock mass condition with two distinct scenarios in FEM analysis.While these structures were unstable according to the 2D analysis conducted in RS2 software in the worstcase scenario, they were stable in the 3D analysis using RS3 software in both scenarios. Besides,feasible cover depths were examined to assess their possible effects on the factor of safety and deformation measurements. It was found that 15 m seems to be an optimal depth for excavating a typical USC in the soft rocks exposed in the region. The 3D FEM results provide valuable information to optimize the future planning and preliminary design of USCs.

Design,construction and mechanical behavior of relics of complete large Longyou rock caverns carved in argillaceous siltstone ground

This paper presents a comprehensive summary of data, analyses and findings from the investigations over the past twelve years about the relics of large Longyou rock caverns carved about 2 000 years ago at shallow depths in argillaceous siltstone. The paper presents the typical features associated with the rock caverns. They include structures, large spans, portals, extreme shallow-buried depths, imprints, drainages, inclined ceiling, inclined sidewalls, slender rock pillars, rock staircases, site and strata selections, caving lighting, carving method, and underground construction surveying. They are used to reconstruct and highlight the design and construction methods adopted by the ancients. The paper further demonstrates that the relics of the complete large rock caverns are a consequence of coincidental combinations of ancient human effort and natural factors. The full occupation of water with weak acidity in the large rock caverns with the soft surrounding rocks of weak alkalinity is found to be the main factor ensuring and preserving the caverns to have been stable and integral over 2 000 years. However, the five unwatered complete rock cavern relics have been experiencing various deteriorations and small failures including cracks, seepage, small rock falls and delaminating ceiling rocks. Although these deteriorations have been repaired and stabilized effectively, the paper demonstrates that an entire roof collapse failure is highly possible in the near future to each of the five unwatered rock cavern relics. The findings presented in this paper are also invaluable both to the long-term protection and preservation of the large rock cavern relics of national and international interests and importance, and to extend and enrich our experience and knowledge on the long-term stability and integrity of man-made underground rock cavern engineering projects.

Natural Radiation Protection and Analysis in Underground Caverns

Underground caverns have important military and civilian uses, but their internal natural radiation may endanger human health, and it is necessary to implement protection. The protective measures taken for an underground cavern in Chongqing have obvious effects. The results show that cleaning the radiation source in the environment and sealing the gap of the hole can re-duce the natural radiation intensity inside the cavern to a certain extent, reducing the ambient temperature can significantly reduce the natural radiation intensity inside the cavern, the use of press-in ventilation can greatly reduce the natural radiation intensity inside the cavern, the cumulative drop can reach 25.63%, and the protective effect is obvious. These protective measures can be used in underground caverns to improve the safety of military and civilian activities.

Stability analysis and determination of rock pillar between two adjacent caverns in different regions of Asmari formation in Iran

Large underground caverns are commonly used in variety of applications. In many cases, because of the geomechanical limitations of dimensions and requirement of high volume, several parallel caverns are used. Plastic zone integration requires a larger rock pillar distance of theses adjacent caverns while eco- nomic and access reasons require smaller distance. In lran many underground projects are located in West and South West, Asmari formation covers a large part of these regions. The stability of underground spaces that are constructed or will be constructed in this formation has been investigated. A proper cross section based on plastic analysis and a stability criterion has been proposed for each region. Finally, in each case, allowable rock pillar between adjacent caverns with similar dimension was determined with two methods （numerical analysis and fire service law）. Results show that Fire Service Law uses a very con- servative safety factor and it was proposed to use a correction factor for allowable distance based on application of underground space.

Integrated approach of predicting rock stability in high mountain valley underground caverns

High mountain valleys are characterized by the development of intricate ground stress fields due to geological processes such as tectonic stress,river erosion,and rock weathering.These processes introduce considerable stability concerns in the surrounding rock formations for underground engineering projects in these regions,highlighting the imperative need for rigorous stability assessments during the design phase to ensure construction safety.This paper introduces an innovative approach for the pre-evaluation of the stability of surrounding rocks in underground caverns situated within high mountain valleys.The methodology comprises several pivotal steps.Initially,we conduct inverse calculations of the ground stress field in complex geological terrains,combining field monitoring and numerical simulations.Subsequently,we ascertain stress-strength ratios of the surrounding rocks using various rock strength criteria.To assess the stability characteristics of the surrounding rocks in the 1^(#)spillway cave within our project area,we employ numerical simulations to compute stress-strength ratios based on different rock strength criteria.Furthermore,we undertake a comparative analysis,utilizing data from the 5^(#)Underground Laboratory(Lab 5)of Jinping II Hydropower Station,aligning the chosen rock strength criterion with the damage characteristics of Lab 50s surrounding rocks.This analysis serves as the cornerstone for evaluating other mechanical responses of the surrounding rocks,thereby validating the pre-evaluation methodology.Our pre-evaluation method takes into account the intricate geological evolution processes specific to high mountain valleys.It also considers the influence of the initial geostress field within the geological range of underground caverns.This comprehensive approach provides a robust foundation for the analysis and assessment of the stability of surrounding rocks,especially in high mountain valley areas,during the design phase of underground engineering projects.The insights derived from this analysis hold substantial practical significance for the effective guidance of such projects.