A New Shaping Model for Green Ceramic Balls

The shaping quality of green ceramic balls is directly related to the efficiency and cost of later machining for the ceramic balls. Until now the shaping for green ceramic balls is still conducted by handwork. In this paper, a new shaping model for green ceramic balls was designed. In the new model, two grinding wheels with the same generator line as circular arc are mounted on symmetry, and their axes are parallel. The green ball can be put in the enveloping space formed by the two grinding wheels. The radius of generator line must be equal to or slightly greater than the final radius of the green balls, which can ensure that an ideal sphere can be enveloped by the generator of grinding wheel as grinding the green body surface with the wheels. One of the two wheels rotates in upward direction at high speed v 1, conversely, the other wheel rotates in downward direction at low speed v 2, and a cluster of compressed air is exerted on the green ball above for canceling out the force acting upon the green ball created by the action of the grinding wheel revolving at high speed and avoiding that the green ball jumps off its station. Because of the randomness of the distributions of abrasive grains on the surface of grinding wheels, the size and shape of the abrasive grains, and the posture of green body when falling into the grinding space, the values and directions of the resultant forces and torques exerted on the body, caused by the tow wheels, are random, the rotation of green body is irregular under the actions of the compressed air and the wheels. The irregularity of rotation can ensure an ideal sphere in theory. Experiment researches indicate that the new shaping model can improve the spherical deviations and the size distribution of the green ceramic balls, raise the production, and reduce the costs. The spherical deviations can be improved to 0.04 mm easily. It can be observed by SEM that there is no crack in the surface of sintered ceramic balls shaped with the new model in green blank.

Experimental Research on Residual Stress in Surface of Silicon Nitride Ceramic Balls

The influence of the residual stress in surface of ceramic balls on the fatigue life is large, because the life of silicon nitride ball bearings is more sensitive to the load acted on the bearings than the life of all-steel ball bearings. In this paper, the influence of thermal stress produced in sintering and mechanical stress formed in lapping process on residual stress in surface of silicon nitride ceramic balls was discussed. The residual compress stress will be formed in the surface of silicon nitride ceramic balls after sintering. The residual tensile stress will be formed in surface of silicon nitride ceramic balls in lapping process, and the size of abrasive particle is smaller, such trend is stronger. In this paper the residual stress was measured by the xylometric measurement in which the material in surface was peeled with lapping. The distribution of residual stress in surface can be calculated with the variation in specific volume. The technological parameter with which the material was peeled by lapping was given, for minimizing the extra influence of the residual stress forming in peeling on the original residual stress in surface, the abrasive particle size would not be too small and the load impressed would not be too large. Some experimental researches on residual stress in surface of silicon nitride ceramic balls were made. The surface of silicon nitride ceramic balls presented residual compressive stress after sintering and the influence of the ball size on the residual stress is feeble. It is expected that the size of ball blank is same for achieving the same residual compressive stress in surface on balls after final machining. In lapping process, the surface of silicon nitride ceramic balls presented residual tensile stress, the larger the load which is impressed on single ball, the larger the amplitude of residual tensile stress is; the smaller the abrasive particle, the stronger the trend of plastic deformation is and the larger the amplitude of residual tensile stress is.

Preparation of High Performance Grccn Alumina Ceramic Balls by Roller Production Waste

To reuse roller waste as a raw material of high performance green ceramic balls, three kinds of white alumina ceramic balls whose wear resistance were 2-3 times of the best high alumina ceramic ball with 90% Al2O3 were prepared, and the Al2O3 content of the prepared balls was 75%. It is found that the effect of calcia and magnesia on the wear resistance of ceramic balls is contrast to the accepted one： the wear rate of the ceramic balls prepared in CaO-Al2O3-SiO2 system is the lowest and the wear rate of the ceramic balls prepared in MgO-Al2O3-SiO2 is the highest. The main crystal phase of the ceramic ball is mullite and corundum. The ceramic ball granular is uniform and fine with 4-5 μm average size. The pore diameter is about 2 μm. The wear way of the ceramic balls is mainly transcrystalline fracture.

ECCENTRIC CIRCULAR GROOVE LAPPING TECHNIQUE FOR CERAMIC BALLS

A new ball lapping method i s presented.By using the method , there is a distance be- tween the centre Iine of cireular groove and the rotating axis of lapping plate。 The proper dis-tance can make the lapped probability of each point on ball surfaee as consistent as possible。 This method is especially adapted for lapping high hardness ceramic balls due to its high material re- moval rate。

Processing of high-precision ceramic balls with a spiral V-groove plate

As the demand for high-performance bearings gradually increases, ceramic balls with excellent proper- ties, such as high accuracy, high reliability, and high chemical durability used, are extensively used for high- performance bearings. In this study, a spiral V-groove plate method is employed in processing high-precision ceramic balls. After the kinematic analysis of the ball-spin angle and enveloped lapping trajectories, an experimental rig is constructed and experiments are conducted to confirm the feasibility of this method. Kinematic analysis results indicate that the method not only allows for the control of the ball-spin angle but also uniformly distributes the enveloped lapping trajectories over the entire ball surface. Experimental results demonstrate that the novel spiral V- groove plate method performs better than the conventional concentric V-groove plate method in terms of roundness, surface roughness, diameter difference, and diameter decrease rate. Ceramic balls with a G3-1evel accuracy are achieved, and their typical roundness, minimum surface roughness, and diameter difference are 0.05, 0.0045, and 0.105 μm, respectively. These findings confirm that the proposed method can be applied to high-accuracy and high-consistency ceramic ball processing.

Preparation and Effect of Rare Earth Composite Ceramic Materials on Reducing Exhaust Emissions

Rare earth composite ceramic materials (RE/CM) were prepared by the method of firing the mixtures of the rare earth elements, polar crystal mineral materials and clays. The effects of processing method on the reducing exhaust emissions were studied. The results show that after dealt with the ceramic balls, the surface tension of gasoline, and the CO concentration among exhaust emissions during combustion, decrease by 2.7% and 11.5%, respectively; however the temperature of the inner flue increases by 4.8%.

Study on solder joint reliability of ceramic ball grid array component based on design of experiment method

Four process parameters, pad diameter, stencil thickness, ball diameter and stand-off were chosen as four control factors. By using an L25 （5^6 ） orthogonal array the ceramic ball grid array （ CBGA ） solder joints which have 25 different combinations of process parameters were designed. The numerical models of all the 25 CBGA solder joints were developed using the Sugrace Evolver. Utilizing the sugrace coordinate exported from the 25 CBGA solder joints numerical models, the finite element analysis models were set up and the nonlinear finite element analysis of the CBGA solder joints under thermal cycles were pegrormed by ANSYS. The thermal fatigue life of CBGA solder joint was calculated using Coffin-Manson equation. Based on the calculated thermal fatigue life results, the range analysis and the variance analysis were pegrormed. The results show that the fatigue life of CBGA solder joint is affected by the pad diameter, the stencil thickness, the ball diameter and the stand-off in a descending order, the best combination of process parameters results in the longest fatigue life is 0.07 mm stand-off, 0.125 mm stencil thickness of, 0.85 mm ball diameter and 0. 89 mm pad diameter. With 95% confidence the pad diameter has a significant effect on the reliability of CBGA solder joints whereas the stand-off, the stencil thickness and the ball diameter have little effect on the reliability of CBGA solder joints.

Preparation of Alumina Abrasion-Resistant Ceramic Grinding Ball with Spent FCC Equilibrium Catalyst

The chemical composition, structure and thermal stability of the spent FCC equilibrium catalyst from an oil refinery were characterized by XRD, FT-IR, DTA-TG, BET, complete chemical analysis, SEM, and XRF. The spent FCC equilibrium catalyst, clay, barium carbonate, and talc were used as the main raw materials to prepare the alumina abrasion-resistant ceramic balls to be used in the powder grinding mill for manufacture of architecture tiles. The results showed that after proper formulation study, the spent FCC equilibrium catalyst could replace industrial alumina to prepare high performance grinding balls. Meanwhile, the various performance indices of the grinding ball could meet the quality standard for similar products, and additionally, the energy saving effect was achieved in the operation of the grinding section, resulting in a successful comprehensive utilization of solid wastes.

Research on the Critical Speed of a Mixed-Flow Turbocharger with Hybrid Ceramic Ball Bearing

The critical speeds for a vehicle turbocharger with hybrid ceramic ball bearing are researched. The ball bearing-rotor system produces resonance when it working in critical speed and that makes the turbocharger injury working for a long time. The calculation and analysis methods of the critical speed for the vehicle turbocharger are described. The critical speed is computed by two methods including Riccati transfer matrix and DyRoBeS finite element method for a vehicle turbocharger with hybrid ceramic ball bearing. The vibration experiment had been taken to validate the calculating result, Comparison between the results by two calculation methods and the test results show that the first critical speed differences are 6.47 % and 5.66 %, the second critical speed differences are 2.87 % and 2.94 % respectively. And then, the primary factors which influence the critical speed are analyzed, the conclusions will be helpful for the vehicle turbocharger bearing-rotor system design.

Rolling contact fatigue of silicon nitride bearing balls under pure rolling condition

A newly developed pure rolling fatigue test rig with three contact points for bearing bails was used to perform rolling contact fatigue （RCF） tests. The fatigue properties of GCrl5 steel bails and two kinds of Si3N4 ceramic balls （GSN-200 and NBD-200） produced with different technologies were compared. Ball surfaces were examined after failure with optical microscope and scanning electron microscope （SEM）. It was identified by tests that the failure mode of ceramic balls was surface spail. The main factor of ceramic bail failure was principal tensile stress. Life tests data, summarized in accordance with the Weibull theory, showed that the life of GSN-200 balls was close to that of GCrl5 balls, whereas the life of NBD-200 balls was much longer than those of GSN-200 and GCr15. Under the same working condition, the temperature rise of all ceramic bails was lower than that of steel balls, and their crack propagation rates were slower than that of steel balls.

A fast detection algorithm for ceramic ball surface defects based on fringe reflection

A ceramic ball is a basic part widely used in precision bearings.There is no perfect testing equipment for ceramic ball surface defects at present.A fast visual detection algorithm for ceramic ball surface defects based on fringe reflection is designed.By means of image preprocessing,grayscale value accumulative differential positioning,edge detection,pixel-value row difference and template matching,the algorithm can locate feature points and judge whether the spherical surface has defects by the number of points.Taking black silicon nitride ceramic balls with a diameter of 6.35 mm as an example,the defect detection time for a single gray scale image is 0.78 s,and the detection limit is 16.5μm.

ZERO TRANSMISSION AND ITS APPLICATION IN HIGH SPEED CNC MACHINE TOOLS

In order to realize high speed machining,the special requirements for the transmission and sturctrue of CNC machine tool have to be satisfied.A high speed spindle unit driven by a built-in motor is developed.An oil-water heat exchange system is used for cooling the spindle motor.The spindle is supported by Si_4N_3 ceramic ball angular contact bearings. An oil-air lubricator is used to lubricate and cool the spindle bearings.Some special structures are taken for balancing the spindle.

Effect of nozzle inlet parameters on the dry granulation atomization process of Si_(3)N_(4) ceramic bearing balls

In this paper,the atomization characteristics of Si3N4 ceramic dry granulation affect the performance of Si3N4 ceramic bearing balls.In order to improve the dry granulation characteristics and the comprehensive performance of Si3N4 ceramic bearing balls,the atomization mechanism of the spinning nozzle used for Si3N4 dry granulation was studied in detail.The interaction between air and binder in the pressure-swirl nozzle is analyzed based on VOF method,the modified realizable k−εturbulence model is used to simulate the flow field inside and outside the pressure-swirl nozzle,the effects of nozzle inlet parameters including the number of tangential inlets and the deflection angle of tangential inlets on the binder volume fraction,velocity distribution and pressure distribution are analyzed.The results show that when the number of tangential inlets increases from 1 to 4,the swirl strength of gas–liquid two-phase in the nozzle increases,the mean diameter of air core increases from 1.51 mm to 2.01 mm,and the spray cone angle increases from 18.5◦to 26.4◦.Besides,when the deflection angle of tangential inlet increases from 0◦to 15◦,the swirl strength of gas–liquid two-phase in the nozzle with the deflection angle of tangential inlet of 10◦is the largest,and the mean diameter of air core and spray cone angle is 3.04 mm and 30.7◦,respectively.Based on the atomization experiment platform of the electric control fuel system,the mean diameter of air core and spray cone angle are measured,the micromorphology of Si3N4 particles is observed,which verifies the correctness of numerical simulation.When the Si3N4 particles are prepared by dry granulation,taking the atomization performance of nozzle into consideration,the pressure-swirl nozzle with 4 tangential inlets and 10◦deflection angle should be selected.

Development of Sensible Heat Storage Materials Using Sand, Clay and Coal Bottom Ash

In this paper, the mechanical and thermal properties of a sand-clay ceramic with additives coal bottom ash (CBA) waste from incinerator coal power plant are investigated to develop an alternative material for thermal energy storage (TES). Ceramic balls are developed at 1000°C and 1060°C using sintering or firing method. The obtained ceramics were compressed with a compression machine and thermally analyse using Decagon devise KD2 Pro thermal analyser. A muffle furnace was also used for thermal cycling at 610°C. It was found that the CBA increased the porosity, which resulted in the increase of the axial tensile strength reaching 3.5 MPa for sand-clay and ash ceramic. The ceramic balls with the required tensile strength for TES were selected. Their volumetric heat capacity, and thermal conductivity range respectively from 2.4075 MJ·m-3·°C-1 to 3.426 MJ·m-3·°C-1 and their thermal conductivity from 0.331 Wm-1·K-1, to 1.014 Wm-1·K-1 depending on sand origin, size and firing temperature. The selected formulas have good thermal stability because the most fragile specimens after 60 thermal cycles did not present any cracks. These properties allow envisioning the use of the ceramic balls developed as filler material for thermocline thermal energy storage (structured beds) in Concentrating Solar Power plants. And for other applications like solar cooker and solar dryer.