A novel process for synthesis gas production over Circulating Fluidized Bed （CFB） using oxygen storage materials as oxygen carder was reported. First, oxygen in the air was chemically fixed and converted to lattice ...A novel process for synthesis gas production over Circulating Fluidized Bed （CFB） using oxygen storage materials as oxygen carder was reported. First, oxygen in the air was chemically fixed and converted to lattice oxygen of oxygen storage materials over regenerator, and then methane was selectively oxidized to synthesis gas with lattice oxygen of oxygen storage materials over riser reactor. The results from simulation reaction of CFB by sequential redox reaction on a fixed bed reactor using lanthanum-based perovskite LaFeO3 and La0.8Sr0.2Fe0.9CO0.1O3 oxides prepared by sol-gel, suggested that the depleted oxygen species could be regenerated, and methane could be oxidized to synthesis gas by lattice oxygen with high selectivity. The partial oxidation of methane to synthesis gas over CFB using lattice oxygen of the oxygen storage materials instead of gaseous oxygen should be possibly applicable.展开更多
Dynamic oxygen storage and release capability （OSC） measurement apparatus was designed to evaluate the OSC performance of ceria-based oxygen storage material. The optimum measurement condition was at a frequency of ...Dynamic oxygen storage and release capability （OSC） measurement apparatus was designed to evaluate the OSC performance of ceria-based oxygen storage material. The optimum measurement condition was at a frequency of 0.1 Hz with the inlet gas-flow sequence CO （5S）→O2（5S）→CO→O2 and a flow rate of 300 ml·min^-1. Under this condition, similar regular square wave in the inlet and outlet of the reactor was obtained to guarantee the reliability of the dynamic OSC results. The dynamic OSC performance of the CeO2 and Ce0.67Zr0.33O2 mixed oxide prepared using the citric sol-gel method was studied at the optimum measurement condition with focus on both quantitative and qualitative analyses, The results reveal distinctly that Ce0.67Zr0.33O2 had better dynamic OSC performance because of its higher oxygen migration rate than CeO2. Under dynamic conditions, two CO2 production peaks occurred corresponding to the CO pulse and the O2 pulse, respectively, during the entire cycle. The intensity and ratio between the two CO2 productions were highly influenced by temperature and frequency indicating complex surface phenomena during the oxygen storage/release process, As a result, this set-up can be applied to the evaluation of ceria-based material on the OSC performance.展开更多
Nanostructured materials have received tremendous interest due to their unique mechanical/electrical properties and overall behavior contributed by the complex synergy of bulk and interfacial properties for efficient ...Nanostructured materials have received tremendous interest due to their unique mechanical/electrical properties and overall behavior contributed by the complex synergy of bulk and interfacial properties for efficient and effective energy conversion and storage. The booming development of nanotechnology affords emerging but effective tools in designing advanced energy material. We reviewed the significant progress and dominated nanostructured energy materials in electrochemical energy conversion and storage devices, including lithium ion batteries, lithium-sulfur batteries, lithium-oxygen batteries, lithium metal batteries, and supercapacitors. The use of nanostructured electrocatalyst for effective electrocatalysis in oxygen reduction and oxygen evolution reactions for fuel cells and metal-air batteries was also included. The challenges in the undesirable side reactions between electrolytes and electrode due to high electrode/electrolyte contact area, low volumetric energy density of electrode owing to low tap density, and uniform production of complex energy materials in working devices should be overcome to fully demonstrate the advanced energy nanostructures for electrochemical energy conversion and storage. The energy chemistry at the interfaces of nanostructured electrode/electrolyte is highly expected to guide the rational design and full demonstration of energy materials in a working device. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.展开更多
Understanding the crystal phase evolution of bimetallic oxide anodes is the main concern to profoundly reveal the conversion reaction kinetics and sodium-ion storage mechanisms.Herein,an integrated selfsupporting anod...Understanding the crystal phase evolution of bimetallic oxide anodes is the main concern to profoundly reveal the conversion reaction kinetics and sodium-ion storage mechanisms.Herein,an integrated selfsupporting anode of the Cu-decorated Cu-Mn bimetallic oxides with oxygen vacancies(Ov-BMO-Cu)are in-situ generated by phase separation and hydrogen etching using nanoporous Cu-Mn alloy as selfsacrificial templates.On this basis,we have elucidated the relationship between the phase evolution,oxygen vacancies and sodium-ion storage mechanisms,further demonstrating the evolution of oxygen vacancies and the inhibition effect of manganese oxides as an“anchor”on grain aggregation of copper oxides.The kinetic analyses confirm that the expanded lattice space and increased oxygen vacancies of cycled Ov-BMO-Cu synergistically guarantee effective sodium-ion diffusion and storage mechanisms.Therefore,the Ov-BMO-Cu electrode exhibits higher reversible capacities of 4.04 mA h cm^(-2)at 0.2 mA cm^(-2)after 100 cycles and 2.20 m A h cm^(-2)at 1.0 mA cm^(-2)after 500 cycles.Besides,the presodiated Ov-BMO-Cu anode delivers a considerable reversible capacity of 0.79 m A h cm^(-2)at 1.0 mA cm^(-2)after 60 cycles in full cells with Na_(3)V_(2)(PO_(4))_(3)cathode,confirming its outstanding practicality.Thus,this work is expected to provide enlightenment for designing high-capacity bimetallic oxide anodes.展开更多
Metal‐organic frameworks(MOFs)are a series of highly porous crystalline materials,which are built from inorganic metal nodes and organic linkers through coordination bonds.Their unique porous structural features(such...Metal‐organic frameworks(MOFs)are a series of highly porous crystalline materials,which are built from inorganic metal nodes and organic linkers through coordination bonds.Their unique porous structural features(such as high porosity,high surface areas,and highly ordered nanoporous structures)and designable structures and compositions have facilitated their use in gas capture,separation,catalysis,and energy storage and conversion.Recently,the design and synthesis of pure MOFs and their derivatives have opened new routes to develop highly efficient electrocatalysts toward oxygen reduction reactions(ORR)and oxygen evolution reactions(OER),which are the core electrode reactions in many energy storage and conversion techniques,such as metal‐air batteries and fuel cells.This review first discusses recent progress in the synthesis and the electrocatalytic applications of pure MOF‐based electrocatalysts toward ORR or OER,including pure MOFs,MOFs decorated with active species,and MOFs incorporated with conductive materials.The following section focuses on the advancements of the design and preparation of various MOF‐derived materials-such as inorganic nano‐(or micro‐)structures/porous carbon composites,pure porous carbons,pure inorganic nano‐(or micro‐)structured materials,and single‐atom electrocatalysts-and their applications in oxygen electrocatalysis.Finally,we present a conclusion and an outlook for some general design strategies and future research directions of MOF‐based oxygen electrocatalysts.展开更多
As the oxygen redox ability shows great effects on the catalytic performances of ceria-zirconia based materials,many strategies have been utilized to improve the oxygen storage capacity.Here in this study,we report a ...As the oxygen redox ability shows great effects on the catalytic performances of ceria-zirconia based materials,many strategies have been utilized to improve the oxygen storage capacity.Here in this study,we report a simple and facile approach to prepare a SO_(4)^(2-)-modified La,Y-doped ceria-zirconia material(SO/CZLY-f)with high oxygen storage capacity.Due to the additional redox process between SO_(4)^(2-)and S^(2-),oxygen storage capacity of SO/CZLY-f(745.3μmol O_(2)/g)is about 1.6 times higher than that of La,Ydoped ceria-zirconia material without SO_(4)^(2-)modification.Moreover,the catalytic activities and stability of the corresponding Pd-only three-way catalyst were measured.Compared to that of Pd@CZLY-f,the operation window of CO,full conversion temperature of HC and NO over Pd@SO/CZLY-f are obviously widened and lowered,respectively.After aging treatment at 1100℃for 4 h,the superiority of aged Pdloading composite is still maintained.展开更多
The oxygen evolution reaction(OER)plays an essential role in many energy storage and conversion technologies,but its high overpotential and sluggish kinetics seriously restrict its energy efficiency.The development of...The oxygen evolution reaction(OER)plays an essential role in many energy storage and conversion technologies,but its high overpotential and sluggish kinetics seriously restrict its energy efficiency.The development of efficient and inexpensive OER electrocatalysts remains a grand challenge.Twodimensional(2D)materials with their unique structure and electronic properties have wide application prospects for OER.In this review,first introducing OER electrocatalytic mechanisms and some crucial parameters for evaluating OER electrocatalysts,the latest progress in the design and construction of 2D materials for OER is systematically discussed,including layered double hydroxides,2D carbon materials,transition metal dichalcogenides,metal oxide and phosphide nanosheets,metal–organic frameworks,covalent-organic frameworks,and MXenes.Obviously,some effective design and optimization strategies to improve the electrocatalytic activity and durability of 2D materials such as OER electrocatalysts have been comprehensively generalized.The advantages and shortcomings of these 2D materials are analyzed in detail,and their practical applications are explained in depth,which is crucial for the rational design of high-performance OER electrocatalysts.Finally,the challenges and future development opportunities for 2D materials in enhanced OER are discussed.Our review is expected to provide clear guidance for the development of new low-cost 2D materials for advanced OER electrocatalysts.展开更多
A series of materials Ce0.3+xZr0.6-xY0.1O1.95 were prepared by co-precipitation routine and the property of these materials was studied by means of oxygen storage capacity, temperature programming reduction, X-ray dif...A series of materials Ce0.3+xZr0.6-xY0.1O1.95 were prepared by co-precipitation routine and the property of these materials was studied by means of oxygen storage capacity, temperature programming reduction, X-ray diffraction, transmission electronic microscope, and X-ray photoelectron spectroscopy. The results indicate that the materials with a low Ce/Zr molar ratio possess higher cerium atom utilization ratio, reducibility and thermal stability than the materials with a high Ce/Zr ratio, and Ce0.35Zr0.55Y0.1O1.95 possesses the best properties.展开更多
基金Project supported by the National Natural Science Foundation of China (20306016, 20322201)
文摘A novel process for synthesis gas production over Circulating Fluidized Bed （CFB） using oxygen storage materials as oxygen carder was reported. First, oxygen in the air was chemically fixed and converted to lattice oxygen of oxygen storage materials over regenerator, and then methane was selectively oxidized to synthesis gas with lattice oxygen of oxygen storage materials over riser reactor. The results from simulation reaction of CFB by sequential redox reaction on a fixed bed reactor using lanthanum-based perovskite LaFeO3 and La0.8Sr0.2Fe0.9CO0.1O3 oxides prepared by sol-gel, suggested that the depleted oxygen species could be regenerated, and methane could be oxidized to synthesis gas by lattice oxygen with high selectivity. The partial oxidation of methane to synthesis gas over CFB using lattice oxygen of the oxygen storage materials instead of gaseous oxygen should be possibly applicable.
基金Project supported by the National"973"Project (2004CB719503) and the Programfor New Century Excellent Talents in University
文摘Dynamic oxygen storage and release capability （OSC） measurement apparatus was designed to evaluate the OSC performance of ceria-based oxygen storage material. The optimum measurement condition was at a frequency of 0.1 Hz with the inlet gas-flow sequence CO （5S）→O2（5S）→CO→O2 and a flow rate of 300 ml·min^-1. Under this condition, similar regular square wave in the inlet and outlet of the reactor was obtained to guarantee the reliability of the dynamic OSC results. The dynamic OSC performance of the CeO2 and Ce0.67Zr0.33O2 mixed oxide prepared using the citric sol-gel method was studied at the optimum measurement condition with focus on both quantitative and qualitative analyses, The results reveal distinctly that Ce0.67Zr0.33O2 had better dynamic OSC performance because of its higher oxygen migration rate than CeO2. Under dynamic conditions, two CO2 production peaks occurred corresponding to the CO pulse and the O2 pulse, respectively, during the entire cycle. The intensity and ratio between the two CO2 productions were highly influenced by temperature and frequency indicating complex surface phenomena during the oxygen storage/release process, As a result, this set-up can be applied to the evaluation of ceria-based material on the OSC performance.
基金supported by the National Key Research and Development Program (no.2016YFA0202500)National Basic Research Program of China (2015CB932500)the Natural Scientific Foundation of China (nos.21306102 and 21422604)
文摘Nanostructured materials have received tremendous interest due to their unique mechanical/electrical properties and overall behavior contributed by the complex synergy of bulk and interfacial properties for efficient and effective energy conversion and storage. The booming development of nanotechnology affords emerging but effective tools in designing advanced energy material. We reviewed the significant progress and dominated nanostructured energy materials in electrochemical energy conversion and storage devices, including lithium ion batteries, lithium-sulfur batteries, lithium-oxygen batteries, lithium metal batteries, and supercapacitors. The use of nanostructured electrocatalyst for effective electrocatalysis in oxygen reduction and oxygen evolution reactions for fuel cells and metal-air batteries was also included. The challenges in the undesirable side reactions between electrolytes and electrode due to high electrode/electrolyte contact area, low volumetric energy density of electrode owing to low tap density, and uniform production of complex energy materials in working devices should be overcome to fully demonstrate the advanced energy nanostructures for electrochemical energy conversion and storage. The energy chemistry at the interfaces of nanostructured electrode/electrolyte is highly expected to guide the rational design and full demonstration of energy materials in a working device. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.
基金supported by the Natural Science Foundation of China(5207123251871165)。
文摘Understanding the crystal phase evolution of bimetallic oxide anodes is the main concern to profoundly reveal the conversion reaction kinetics and sodium-ion storage mechanisms.Herein,an integrated selfsupporting anode of the Cu-decorated Cu-Mn bimetallic oxides with oxygen vacancies(Ov-BMO-Cu)are in-situ generated by phase separation and hydrogen etching using nanoporous Cu-Mn alloy as selfsacrificial templates.On this basis,we have elucidated the relationship between the phase evolution,oxygen vacancies and sodium-ion storage mechanisms,further demonstrating the evolution of oxygen vacancies and the inhibition effect of manganese oxides as an“anchor”on grain aggregation of copper oxides.The kinetic analyses confirm that the expanded lattice space and increased oxygen vacancies of cycled Ov-BMO-Cu synergistically guarantee effective sodium-ion diffusion and storage mechanisms.Therefore,the Ov-BMO-Cu electrode exhibits higher reversible capacities of 4.04 mA h cm^(-2)at 0.2 mA cm^(-2)after 100 cycles and 2.20 m A h cm^(-2)at 1.0 mA cm^(-2)after 500 cycles.Besides,the presodiated Ov-BMO-Cu anode delivers a considerable reversible capacity of 0.79 m A h cm^(-2)at 1.0 mA cm^(-2)after 60 cycles in full cells with Na_(3)V_(2)(PO_(4))_(3)cathode,confirming its outstanding practicality.Thus,this work is expected to provide enlightenment for designing high-capacity bimetallic oxide anodes.
文摘Metal‐organic frameworks(MOFs)are a series of highly porous crystalline materials,which are built from inorganic metal nodes and organic linkers through coordination bonds.Their unique porous structural features(such as high porosity,high surface areas,and highly ordered nanoporous structures)and designable structures and compositions have facilitated their use in gas capture,separation,catalysis,and energy storage and conversion.Recently,the design and synthesis of pure MOFs and their derivatives have opened new routes to develop highly efficient electrocatalysts toward oxygen reduction reactions(ORR)and oxygen evolution reactions(OER),which are the core electrode reactions in many energy storage and conversion techniques,such as metal‐air batteries and fuel cells.This review first discusses recent progress in the synthesis and the electrocatalytic applications of pure MOF‐based electrocatalysts toward ORR or OER,including pure MOFs,MOFs decorated with active species,and MOFs incorporated with conductive materials.The following section focuses on the advancements of the design and preparation of various MOF‐derived materials-such as inorganic nano‐(or micro‐)structures/porous carbon composites,pure porous carbons,pure inorganic nano‐(or micro‐)structured materials,and single‐atom electrocatalysts-and their applications in oxygen electrocatalysis.Finally,we present a conclusion and an outlook for some general design strategies and future research directions of MOF‐based oxygen electrocatalysts.
基金Project supported by the Beijing Nova Program(Z181100006218030)Major State Research Development Program of Hebei province(20374202D)。
文摘As the oxygen redox ability shows great effects on the catalytic performances of ceria-zirconia based materials,many strategies have been utilized to improve the oxygen storage capacity.Here in this study,we report a simple and facile approach to prepare a SO_(4)^(2-)-modified La,Y-doped ceria-zirconia material(SO/CZLY-f)with high oxygen storage capacity.Due to the additional redox process between SO_(4)^(2-)and S^(2-),oxygen storage capacity of SO/CZLY-f(745.3μmol O_(2)/g)is about 1.6 times higher than that of La,Ydoped ceria-zirconia material without SO_(4)^(2-)modification.Moreover,the catalytic activities and stability of the corresponding Pd-only three-way catalyst were measured.Compared to that of Pd@CZLY-f,the operation window of CO,full conversion temperature of HC and NO over Pd@SO/CZLY-f are obviously widened and lowered,respectively.After aging treatment at 1100℃for 4 h,the superiority of aged Pdloading composite is still maintained.
基金the Youth Talents Program of China,the Key Research and Development Projects in Shaanxi Province(grant no.2021GXLH-Z-072)the State Key Laboratory of Power System and Generation Equipment(grant no.SKLD21KM07)the National Natural Science Foundation of China-NSAF Joint Fund(CN)(grant no.U2230113).
文摘The oxygen evolution reaction(OER)plays an essential role in many energy storage and conversion technologies,but its high overpotential and sluggish kinetics seriously restrict its energy efficiency.The development of efficient and inexpensive OER electrocatalysts remains a grand challenge.Twodimensional(2D)materials with their unique structure and electronic properties have wide application prospects for OER.In this review,first introducing OER electrocatalytic mechanisms and some crucial parameters for evaluating OER electrocatalysts,the latest progress in the design and construction of 2D materials for OER is systematically discussed,including layered double hydroxides,2D carbon materials,transition metal dichalcogenides,metal oxide and phosphide nanosheets,metal–organic frameworks,covalent-organic frameworks,and MXenes.Obviously,some effective design and optimization strategies to improve the electrocatalytic activity and durability of 2D materials such as OER electrocatalysts have been comprehensively generalized.The advantages and shortcomings of these 2D materials are analyzed in detail,and their practical applications are explained in depth,which is crucial for the rational design of high-performance OER electrocatalysts.Finally,the challenges and future development opportunities for 2D materials in enhanced OER are discussed.Our review is expected to provide clear guidance for the development of new low-cost 2D materials for advanced OER electrocatalysts.
文摘A series of materials Ce0.3+xZr0.6-xY0.1O1.95 were prepared by co-precipitation routine and the property of these materials was studied by means of oxygen storage capacity, temperature programming reduction, X-ray diffraction, transmission electronic microscope, and X-ray photoelectron spectroscopy. The results indicate that the materials with a low Ce/Zr molar ratio possess higher cerium atom utilization ratio, reducibility and thermal stability than the materials with a high Ce/Zr ratio, and Ce0.35Zr0.55Y0.1O1.95 possesses the best properties.
