A s a means to carr y out educational ac tivities and cultivate talents on international standardization,the workshop for ISO Chairs and Convenors co-organized by ISO and SAC was held from October 30 to November 8at C...A s a means to carr y out educational ac tivities and cultivate talents on international standardization,the workshop for ISO Chairs and Convenors co-organized by ISO and SAC was held from October 30 to November 8at China Jiliang University in Hangzhou,eastern China’s Zhejiang province.Five ISO experts were invited to give lectures on the exper tise on technical work process,展开更多
The sliding chairs are important components that support the switch rail conversion in the railway turnout.Due to the harsh environmental erosion and the attack from the wheel vibration,the failure rate of the sliding...The sliding chairs are important components that support the switch rail conversion in the railway turnout.Due to the harsh environmental erosion and the attack from the wheel vibration,the failure rate of the sliding chairs accounts for up to 10%of the total failure number in turnout.However,there is little research carried out in the existing literature to diagnose the deterioration states of the sliding chairs.To fill out this gap,by utilizing the images containing the sliding chairs,we propose an improved You Only Look Once version 7(YOLOv7)to identify the state of the sliding chairs.Specifically,to meet the challenge brought by the small inter-class differences among the sliding chair states,we first integrate the Convolutional Block Attention Module(CBAM)into the YOLOv7 backbone to screen the information conducive to state identification.Then,an extra detector for a small object is customized into the YOLOv7 network in order to detect the small-scale sliding chairs in images.Meanwhile,we revise the localization loss in the objective function as the Efficient Intersection over Union(EIoU)to optimize the design of the aspect ratio,which helps the localization of the sliding chairs.Next,to address the issue caused by the varying scales of the sliding chairs,we employ K-means++to optimize the priori selection of the initial anchor boxes.Finally,based on the images collected from real-world turnouts,the proposed method is verified and the results show that our method outperforms the basic YOLOv7 in the state identification of the sliding chairs with 4%improvements in terms of both mean Average Precision@0.5(mAP@0.5)and F1-score.展开更多
Introduction:Rotatory chair testing has been used to evaluate horizontal canal function.Frequently used tests include sinusoidal harmonic acceleration test(SHAT)and velocity step test(VST).Objectives:Assessment of age...Introduction:Rotatory chair testing has been used to evaluate horizontal canal function.Frequently used tests include sinusoidal harmonic acceleration test(SHAT)and velocity step test(VST).Objectives:Assessment of age effect on the SHAT and VST and assessment of test-retest reliability of the parameters of those two tests.Methods:A prospective study was performed on 100 subjects with no ear or vestibular complaints and normal vestibular evaluation.They were divided into two groups;Group A:below 50 years of age and Group B:50 years of age or above.SHAT was presented at frequencies 0.02,0.04,0.08,0.16,0.32,0.64 Hz with a peak velocity of 60°/s.VST was performed using a maximum velocity of 100°/s with acceleration and deceleration of 200°/s2.Thirty subjects were tested twice to assess reliability.Results:Study participants ranged in age from 20 to 67 years.Regarding group A,the mean age was30.92±7.31 and 55.36±4.61 for group B.No significant differences were found in SHAT parameters between the two groups.As well,there was no significant difference in VST per-rotatory time constant,however,post-rotatory time constant was significantly longer for Group B(P value<0.05).Intraclass correlation coefficient(ICC)values showed moderate to good reliability(ICC 0.5800.818)for SHAT parameters for the lower frequencies and indicated moderate reliability for VST time constant(ICC 0.5090.652).Conclusions:Age has no significant effect on the parameters of SHAT and VST.Test-retest reliability is generally good for both tests.展开更多
The development of insertion-type anodes is the key to designing“rocking chair”zinc-ion batteries.However,there is rare report on high mass loading anode with high performances.Here,{001}-oriented Bi OCl nanosheets ...The development of insertion-type anodes is the key to designing“rocking chair”zinc-ion batteries.However,there is rare report on high mass loading anode with high performances.Here,{001}-oriented Bi OCl nanosheets with Sn doping are proposed as a promising insertion-type anode.The designs of cross-linked CNTs conductive network,{001}-oriented nanosheet,and Sn doping significantly enhance ion/electron transport,proved via experimental tests and theoretical calculations(density of states and diffusion barrier).The H^(+)/Zn^(2+)synergistic co-insertion mechanism is proved via ex situ XRD,Raman,XPS,and SEM tests.Accordingly,this optimized electrode delivers a high reversible capacity of 194 m A h g^(-1)at 0.1 A g^(-1)with a voltage of≈0.37 V and an impressive cyclability with 128 m A h g^(-1)over 2500 cycles at 1 A g^(-1).It also shows satisfactory performances at an ultrahigh mass loading of 10 mg cm^(-2).Moreover,the Sn-Bi OCl//MnO_(2)full cell displays a reversible capacity of 85 m A h g^(-1)at 0.2 A g^(-1)during cyclic test.展开更多
I have a nice new bedroom.My bedroom is not big and it is bright.A chair and a bed are in it.A cat is under the chair and some shoes is under the bed.Next to the bed,there is a writing desk.I often writemy homework on...I have a nice new bedroom.My bedroom is not big and it is bright.A chair and a bed are in it.A cat is under the chair and some shoes is under the bed.Next to the bed,there is a writing desk.I often writemy homework on it.展开更多
For the past six decades,Uganda and China have enjoyed remarkable bilateral relations and Uganda being recently elected to chair G77+China mechanism is set to drive the relationship to even greater heights.That’s acc...For the past six decades,Uganda and China have enjoyed remarkable bilateral relations and Uganda being recently elected to chair G77+China mechanism is set to drive the relationship to even greater heights.That’s according to Uganda’s First Deputy Prime Minister Rebecca Kadaga,who made the remarks recently while speaking at an event to mark the 74th anniversary of the founding of the People’s Republic of China.In response,the charge d’affaires at the Chinese Embassy in Uganda,Fan Xuecheng,toasted the long-standing friendship between the peoples of China and Uganda.展开更多
The ＂poly＂ chair is a combination of the excellent elements of traditional arts and crafts and modern materials. Some innovations have been made while respecting the lines and patterns of the traditional chair in th...The ＂poly＂ chair is a combination of the excellent elements of traditional arts and crafts and modern materials. Some innovations have been made while respecting the lines and patterns of the traditional chair in the design of the ＂poly＂ chair. The structure of the chair adopts the traditional pattern fish scale pattern, engraving it on the seat surface, which not only looks beautiful but also plays a supporting role; its transparent feeling gives a visual feast. In each of its structures, some of our traditional elements are properly applied to the chairs. Break the wooden structure of the past, the use of stainless steel material, the perfect combination of traditional and modern elements. So that ＂poly＂ chair is not only an ornamental handicrafts, but also a use of furniture, functional and decorative unity. In giving the feeling of light and transparent at the same time, gives a sense of grace. This design report details the selection of topics from research, to the design of the entire process.展开更多
Infants with congenital deafness caused by severe bilateral inner ear malformations frequently suffer from severe hearing loss and poor balance. Unfortunately, the use of hearing aids is usually ineffective in recover...Infants with congenital deafness caused by severe bilateral inner ear malformations frequently suffer from severe hearing loss and poor balance. Unfortunately, the use of hearing aids is usually ineffective in recovering hearing, necessitating cochlear implants. We report a case of a 6-year-old boy with congenital deafness and bilateral inner ear malformations(right side, incomplete partition type I [IP-I]; left side, common cavity deformity). Hearing aids had a remarkable effect in this patient, enabling sufficient and favorable hearing recovery such as to allow the patient to engage in daily conversations. Per-rotatory nystagmus was recorded on an electronystagmogram for both right and left rotations in a damped rotational chair test. It is rare for deaf children with severe bilateral inner ear malformation to demonstrate favorable development in hearing and good equilibrium function. Our findings suggest that auditoryevestibular hair cells in this patient may have been partially preserved despite IP-I in the right ear and common cavity deformity of the left ear.展开更多
A robotic wheelchair is assumed to be capable of doing tasks like navigation, obstacle detection, etc. using sensors and intelligence. The initial part of the work was development of a cap controlled wheelchair to tes...A robotic wheelchair is assumed to be capable of doing tasks like navigation, obstacle detection, etc. using sensors and intelligence. The initial part of the work was development of a cap controlled wheelchair to test and verify the gesture operation. Following that, a real time operating wheelchair was developed consisting of mode changing option between joystick control mode and head gesture control mode as per as the user’s requirement. The wheelchair consists of MPU6050 sensor, joystick module, RF module, battery, dc motor, toggle switch and Arduino. The movement of the head is detected by MPU6050 and the signal is transmitted to the microcontroller. Then the signal is processed by controller and motion of wheelchair is enabled for navigation. The wheelchair was capable of moving left, right, forward and backward direction. The speed of the wheelchair was 4.8 km/h when tested. Design objective of the wheelchair included cost effectiveness without compromising safety, flexibility and mobility for the users.展开更多
文摘A s a means to carr y out educational ac tivities and cultivate talents on international standardization,the workshop for ISO Chairs and Convenors co-organized by ISO and SAC was held from October 30 to November 8at China Jiliang University in Hangzhou,eastern China’s Zhejiang province.Five ISO experts were invited to give lectures on the exper tise on technical work process,
基金supported by the National Key R&D Program of China(2021YFF0501102)the National Natural Science Foundation of China(52372308,U2368202,U1934219,52202392,52022010,U22A2046,52172322,and 62271486).
文摘The sliding chairs are important components that support the switch rail conversion in the railway turnout.Due to the harsh environmental erosion and the attack from the wheel vibration,the failure rate of the sliding chairs accounts for up to 10%of the total failure number in turnout.However,there is little research carried out in the existing literature to diagnose the deterioration states of the sliding chairs.To fill out this gap,by utilizing the images containing the sliding chairs,we propose an improved You Only Look Once version 7(YOLOv7)to identify the state of the sliding chairs.Specifically,to meet the challenge brought by the small inter-class differences among the sliding chair states,we first integrate the Convolutional Block Attention Module(CBAM)into the YOLOv7 backbone to screen the information conducive to state identification.Then,an extra detector for a small object is customized into the YOLOv7 network in order to detect the small-scale sliding chairs in images.Meanwhile,we revise the localization loss in the objective function as the Efficient Intersection over Union(EIoU)to optimize the design of the aspect ratio,which helps the localization of the sliding chairs.Next,to address the issue caused by the varying scales of the sliding chairs,we employ K-means++to optimize the priori selection of the initial anchor boxes.Finally,based on the images collected from real-world turnouts,the proposed method is verified and the results show that our method outperforms the basic YOLOv7 in the state identification of the sliding chairs with 4%improvements in terms of both mean Average Precision@0.5(mAP@0.5)and F1-score.
文摘Introduction:Rotatory chair testing has been used to evaluate horizontal canal function.Frequently used tests include sinusoidal harmonic acceleration test(SHAT)and velocity step test(VST).Objectives:Assessment of age effect on the SHAT and VST and assessment of test-retest reliability of the parameters of those two tests.Methods:A prospective study was performed on 100 subjects with no ear or vestibular complaints and normal vestibular evaluation.They were divided into two groups;Group A:below 50 years of age and Group B:50 years of age or above.SHAT was presented at frequencies 0.02,0.04,0.08,0.16,0.32,0.64 Hz with a peak velocity of 60°/s.VST was performed using a maximum velocity of 100°/s with acceleration and deceleration of 200°/s2.Thirty subjects were tested twice to assess reliability.Results:Study participants ranged in age from 20 to 67 years.Regarding group A,the mean age was30.92±7.31 and 55.36±4.61 for group B.No significant differences were found in SHAT parameters between the two groups.As well,there was no significant difference in VST per-rotatory time constant,however,post-rotatory time constant was significantly longer for Group B(P value<0.05).Intraclass correlation coefficient(ICC)values showed moderate to good reliability(ICC 0.5800.818)for SHAT parameters for the lower frequencies and indicated moderate reliability for VST time constant(ICC 0.5090.652).Conclusions:Age has no significant effect on the parameters of SHAT and VST.Test-retest reliability is generally good for both tests.
基金supported by the Natural Science Foundation of China (52102312,51672234,and 52072325)the Natural Science Foundation of Hunan Province of China (2021JJ40528)+2 种基金the China Postdoctoral Science Foundation (2020M682581)the Macao Young Scholars Program (AM2021011)the College Student Innovation and Entrepreneurship Training Program (S202210530051)。
文摘The development of insertion-type anodes is the key to designing“rocking chair”zinc-ion batteries.However,there is rare report on high mass loading anode with high performances.Here,{001}-oriented Bi OCl nanosheets with Sn doping are proposed as a promising insertion-type anode.The designs of cross-linked CNTs conductive network,{001}-oriented nanosheet,and Sn doping significantly enhance ion/electron transport,proved via experimental tests and theoretical calculations(density of states and diffusion barrier).The H^(+)/Zn^(2+)synergistic co-insertion mechanism is proved via ex situ XRD,Raman,XPS,and SEM tests.Accordingly,this optimized electrode delivers a high reversible capacity of 194 m A h g^(-1)at 0.1 A g^(-1)with a voltage of≈0.37 V and an impressive cyclability with 128 m A h g^(-1)over 2500 cycles at 1 A g^(-1).It also shows satisfactory performances at an ultrahigh mass loading of 10 mg cm^(-2).Moreover,the Sn-Bi OCl//MnO_(2)full cell displays a reversible capacity of 85 m A h g^(-1)at 0.2 A g^(-1)during cyclic test.
文摘I have a nice new bedroom.My bedroom is not big and it is bright.A chair and a bed are in it.A cat is under the chair and some shoes is under the bed.Next to the bed,there is a writing desk.I often writemy homework on it.
文摘For the past six decades,Uganda and China have enjoyed remarkable bilateral relations and Uganda being recently elected to chair G77+China mechanism is set to drive the relationship to even greater heights.That’s according to Uganda’s First Deputy Prime Minister Rebecca Kadaga,who made the remarks recently while speaking at an event to mark the 74th anniversary of the founding of the People’s Republic of China.In response,the charge d’affaires at the Chinese Embassy in Uganda,Fan Xuecheng,toasted the long-standing friendship between the peoples of China and Uganda.
文摘The ＂poly＂ chair is a combination of the excellent elements of traditional arts and crafts and modern materials. Some innovations have been made while respecting the lines and patterns of the traditional chair in the design of the ＂poly＂ chair. The structure of the chair adopts the traditional pattern fish scale pattern, engraving it on the seat surface, which not only looks beautiful but also plays a supporting role; its transparent feeling gives a visual feast. In each of its structures, some of our traditional elements are properly applied to the chairs. Break the wooden structure of the past, the use of stainless steel material, the perfect combination of traditional and modern elements. So that ＂poly＂ chair is not only an ornamental handicrafts, but also a use of furniture, functional and decorative unity. In giving the feeling of light and transparent at the same time, gives a sense of grace. This design report details the selection of topics from research, to the design of the entire process.
文摘Infants with congenital deafness caused by severe bilateral inner ear malformations frequently suffer from severe hearing loss and poor balance. Unfortunately, the use of hearing aids is usually ineffective in recovering hearing, necessitating cochlear implants. We report a case of a 6-year-old boy with congenital deafness and bilateral inner ear malformations(right side, incomplete partition type I [IP-I]; left side, common cavity deformity). Hearing aids had a remarkable effect in this patient, enabling sufficient and favorable hearing recovery such as to allow the patient to engage in daily conversations. Per-rotatory nystagmus was recorded on an electronystagmogram for both right and left rotations in a damped rotational chair test. It is rare for deaf children with severe bilateral inner ear malformation to demonstrate favorable development in hearing and good equilibrium function. Our findings suggest that auditoryevestibular hair cells in this patient may have been partially preserved despite IP-I in the right ear and common cavity deformity of the left ear.
文摘A robotic wheelchair is assumed to be capable of doing tasks like navigation, obstacle detection, etc. using sensors and intelligence. The initial part of the work was development of a cap controlled wheelchair to test and verify the gesture operation. Following that, a real time operating wheelchair was developed consisting of mode changing option between joystick control mode and head gesture control mode as per as the user’s requirement. The wheelchair consists of MPU6050 sensor, joystick module, RF module, battery, dc motor, toggle switch and Arduino. The movement of the head is detected by MPU6050 and the signal is transmitted to the microcontroller. Then the signal is processed by controller and motion of wheelchair is enabled for navigation. The wheelchair was capable of moving left, right, forward and backward direction. The speed of the wheelchair was 4.8 km/h when tested. Design objective of the wheelchair included cost effectiveness without compromising safety, flexibility and mobility for the users.
