Changes in Soil Properties Under the Influences of Cropping and Drip Irrigation During the Reclamation of Severe Salt-Affected Soils

Reclamation of salt-affected land plays an important role in mitigating the pressure of agricultural land due to competition with industry and construction in China. Drip irrigation was found to be an effective method to reclaim salt-affected land. In order to improve the effect of reclamation and sustainability of salt-affected land production, a field experiment （with reclaimed 1-3 yr fields） was carried out to investigate changes in soil physical, chemical, and biological properties during the process of reclamation with cropping maize and drip irrigation. Results showed that soil bulk density in 0-20 cm soil layer decreased from 1.71 g·cm-3 in unreclaimed land to 1.44 g ·cm^-3 in reclaimed 3 yr fields, and saturated soil water content of 0-10 cm layer increased correspondingly from 20.3 to 30.2%. Both soil salinity and pH value in 0-40 cm soil layer dropped markedly after reclaiming 3 yr. Soil organic matter content reduced, while total nitrogen, total phosphorus, and total potassium all tended to increase after cropping and drip irrigation. The quantities of bacteria, actinomycete, and fungi in 0-40 cm soil layer all greatly increased with increase of reclaimed years, and they tended to distribute homogeneously in 0-40 cm soil profile. The urease activity and alkaline phosphatase activity in 0-40 cm soil layers were also enhanced, but the sucrase activity was not greatly changed. These results indicated that after crop cultivation and drip irrigation, soil physical environment and nutrients status were both improved. This was benefit for microorganism＇s activity and plant＇s growth.

Changes in vegetation and soil properties during recovery of a subtropical forest in South China

Secondary forests account for a large amount of subtropical forest due to persistent anthropogenic disturbance in China.The interaction between vegetation and soil during recovery process is rather complex and dependent on forest conditions.Understanding how vegetation and soil properties changes and how their relationship develops in secondary forests is key to effective forest restoration and management.Here we explored the patterns of vegetation and soil properties as well as their correlations during forest recovery process in a subtropical forest in south China.Plots of three forest types,i.e.,broadleaf-conifermixedforest,broadleaved forest and old growth stand,were established to represent the recovery stages.The results showed that diversity patterns in the tree,shrub and herb layers were different:in the tree layer the species diversity peaked at the intermediate stage,while in the understory layers it decreased chronologically.Most of the soil factors showed an increasing trend,and different effects of soil factors were found for the three layers as well as for the two spatial scales.Together,our results suggested that vegetation and soil might be interdependent during the recovery course.Further studies are needed on exploring how vegetation interplays with soil at different scales and how nutrient limitations affects the vegetation development in a chronosequence.

The magnetic properties and magnetocaloric effects in binary R-T(R = Pr,Gd,Tb,Dy,Ho,Er,Tm;T = Ga,Ni,Co,Cu)intermetallic compounds

In this paper, we review the magnetic properties and magnetocaloric effects（MCE） of binary R–T（R = Pr, Gd, Tb,Dy, Ho, Er, Tm; T = Ga, Ni, Co, Cu） intermetallic compounds（including RGa series, RNi series, R_（12）Co_7 series, R_3 Co series and RCu_2series）, which have been investigated in detail in the past several years. The R–T compounds are studied by means of magnetic measurements, heat capacity measurements, magnetoresistance measurements and neutron powder diffraction measurements. The R–T compounds show complex magnetic transitions and interesting magnetic properties.The types of magnetic transitions are investigated and confirmed in detail by multiple approaches. Especially, most of the R–T compounds undergo more than one magnetic transition, which has significant impact on the magnetocaloric effect of R–T compounds. The MCE of R–T compounds are calculated by different ways and the special shapes of MCE peaks for different compounds are investigated and discussed in detail. To improve the MCE performance of R–T compounds,atoms with large spin（S） and atoms with large total angular momentum（J） are introduced to substitute the related rare earth atoms. With the atom substitution, the maximum of magnetic entropy change（？SM）, refrigerant temperature width（Twidth）or refrigerant capacity（RC） is enlarged for some R–T compounds. In the low temperature range, binary R–T（R = Pr, Gd,Tb, Dy, Ho, Er, Tm; T = Ga, Ni, Co, Cu） intermetallic compounds（including RGa series, RNi series,R_（12）Co_7 series, R_3 Co series and RCu_2series） show excellent performance of MCE, indicating the potential application for gas liquefaction in the future.

Structural Evolution and Phase Change Properties of C-Doped Ge_2Sb_2Te_5 Films During Heating in Air

We elucidate the importance of a capping layer on the structural evolution and phase change properties of carbondoped Ge2 Sb2 Te5（C-GST） films during heating in air. Both the C-GST films without and with a thin SiO2 capping layer（C-GST and C-GST/SiO2） are deposited for comparison. Large differences are observed between C-GST and C-GST/SiO2 films in resistance-temperature, x-ray diffraction, x-ray photoelectron spectroscopy,Raman spectra, data retention capability and optical band gap measurements. In the C-GST film, resistancetemperature measurement reveals an unusual smooth decrease in resistance above 110℃ during heating. Xray diffraction result has excluded the possibility of phase change in the C-GST film below 170℃. The x-ray photoelectron spectroscopy experimental result reveals the evolution of Te chemical valence because of the carbon oxidation during heating. Raman spectra further demonstrate that phase changes from an amorphous state to the hexagonal state occur directly during heating in the C-GST film. The quite smooth decrease in resistance is believed to be related with the formation of Te-rich GeTe4-n Gen（n = 0, 1） units above 110℃ in the C-GST film. The oxidation of carbon is harmful to the C-GST phase change properties.

Enhancement of Heat-Resistance of Carbonyl Iron Particles by Coating with Silica and Consequent Changes in Electromagnetic Properties

Silica-coated carbonyl iron particles （CIPs） are fabricated with the Stober method to improve their heat-resistance and wave-aSsorption properties. The morphology, heat-resistance, electromagnetic properties and microwave absorption of raw-CIPs and silica-coated CIPs are investigated using a scanning electron microscope, an energy dispersive spectrometer, a thermal-gravimetric analyzer, and a network analyzer. The results show that the heat-resistance of silica-coated CIPs is better than that of raw CIFs. The reflection losses exceeding -lOdB of silica-coated CIPs are obtained in the frequency range 9.5-12.4 GHz for the absorber thickness of 2.3 mm, and the same reflection losses of uncoated CIPs reach the data in the lower frequency range for the same thickness. The enhanced microwave absorption of silica-coated CIPs can be ascribed to the combination of proper electromagnetic impedance match and the decrease of dielectric permittivity.

Diageneses and Their Influences on Reservoir Properties of Chang 2 Oil Member in Renshan Region, Zhidan Oilfield, Ordos Basin

1 Introduction Yanchang Formation in Upper Triassic,Ordos basin contains the most abundant hydrocarbon resources in North China(Wang et al.,2014).The sandstones are the most important oil-bearing reservoirs in Yanchang

Fabrication and Properties of Microencapsulated n-octadecane and Paraffin

Microencapsulated n-alkanes as energy- storage materials have promising application prospects. The ndcrocapsules containing 100 - 50 wt% of n - octadecane, 0 -20 wt% of paraffin and 0 - 30 wt% of cyclohexane were synthesized by in-situ polymerization using melamine- formaldehyde polymer as shell. Cyclohexane was removed after heat-treated the microcapsules at 100℃. The morphologies, cell parameters, phase change properties, thermal stable temperatures of these microcapsules were examined. The diameters of these microcapsules are lower than 5 μm. The effect of paraffin in the microcapsules on the cell parameters of n-octadecane is negligible. The paraff＇m is effectively used as a nucleating agent to decrease the degree of supercooling. The melting enthalpy is decreased from 132 J/g to 111 J/g due to the increase of the cyclohexane contents. The thermal stable temperature is enhanced 6 - 16℃ after heat-treated the microcapsules at 160℃ for 30 min.

Nitrogen-Induced Change of Magnetic Properties in Antiperovskite-Type Carbide:Mn3InC

The effects of N substitution on the magnetic properties of Mn3InC1-xNx （0.0≤ x ≤0.7） are investigated sys- tematically. Partial substitution of N for C leads to the monotonic reduction in both the Curie temperature Tc and saturated magnetization Ms. The final results obtained from thermo-magnetie curves demonstrate that Mn3InC1-xNx samples show a magnetic phase transition from a paramagnetic （PM） state to a ferrimagnetic （FIM） state consisting of ferromagnetic （FM） and antiferromagnetie （AFM） components. In addition, there is a competition between the AFM component and the FM component in the FIM state with the change of the N-doped content. Magnetic measurements of Mn3InC at 100 Oe and 5000 Oe indicate the metastability and the coexistence of different magnetic phases at lower temperature. The spans of FIM phase broaden gradually with further N doping. The mechanism for the induction of the complicated magnetic state is still in controversy. However, the results clearly show that the doping at the X site in antiperovskite Mn3AX materials is as useful as that of the A and Mn sites.

CHANGES OF STRUCTURE AND PROPERTIES OF POLY (ETHYLENE TEREPHTHALATE) CAUSED BY IN-SITU POLYMERIZATION OF PYRROLE

Conductive polymer composites based on crystalline polymer matrix have been prepared by using an in-situ polymerization process of pyrrole in amorphous poly （ethylene terephthalate） （PET） film. The DSC and WAXD measurement and SEM observation show that liquid-induced crystallization of PET matrix has occurred during the preparation of composite films. Depending upon the equilibrium degree of swelling and crystallinity, the limited depth of penetration of pyrrole molecules results in a skin-core structure of the composite film. The skin layer containing charge transfer intercalated polypyrrole has a surface resistance of 3.5×10;Ω. Rigid and heat-resistant polypyrrole molecules formed in PET film increase the tensile modulus and, especially, the rigidity of PET at elevated temperatures. However, they decrease the tensile strength and elongation at break, and impair the thermal ductility of PET.

Preparation and characterization of hexadecane microcapsule with polyurea-melamine formaldehyde resin shell materials

This paper gives a brief report of the preparation of hexadecane microcapsule with polyurea-melamine formaldehyde resin shell materials(HMPM).The sealing performance and thermal stability of HMPM was enhanced much more effectively than that of microcapsule with polyurea shell material(HPM).The results of microscopical imaging analysis system,DSC,TG,and laser particle analyzer were briefly introduced.

Property changes of anchor grout calcined ginger nuts admixed with fly ash and quartz sand after accelerated ageing tests

Calcined ginger nuts admixed by fly ash and quartz sand (CGN-(F+S)) has been validated to be basically compatible to earthen sites as an anchor grout. Accelerated ageing tests including water stability test, temperature and humidity cycling test, soundness test and alkali resistance test are conducted with the objective to further research the property changes of CGN-(F+S) grout. Density, surface hardness, water penetration capacity, water permeability capacity, soluble salt, scanning electron microscopy (SEM) images and energy dispersive spectrometry (EDS) spectrum of these samples have been tested after accelerated ageing tests. The results show that densities of samples decrease, surface hardness, water penetration capacity and water permeability capacity of samples increase generally. Besides, soluble salt analysis, SEM and EDS results well corroborate the changes. Based on the results it can be concluded that property changes are most serious after temperature and humidity cycling test, followed by water stability, soundness and alkali resistance test in sequence. But in general, CGN-(F+S) still has good durability.

Microencapsulation of stearic acid with polymethylmethacrylate using iron(Ⅲ) chloride as photo-initiator for thermal energy storage

Aiming to identify the validity of fabricating microencapsulated phase change material(PCM) with polymethylmethacrylate(PMMA) by ultraviolet curing emulsion polymerization method using iron(III) chloride as photoinitiator,SA/PMMA microcapsules were prepared and various techniques were employed to determine the ignition mechanism,structural characteristics and thermal properties of the composite.The results shown that the microcapsules containing SA with maximum percentage of 52.20 wt% formed by radical mechanism and only physical interactions existed in the components both in the prepared process and subsequent use.The phase change temperatures and latent heats of the microencapsulated SA were measured as 55.3 °C and 102.1 J·g^(-1) for melting,and 48.8 °C and 102.8 J·g^(-1) for freezing,respectively.Thermal gravimetric analysis revealed that SA/PMMA has good thermal durability in working temperature range.The results of accelerated thermal cycling test are all shown that the SA/PMMA have excellent thermal reliability and chemical stability although they were subjected 1000 melting/freezing cycles.In summary,the comparable thermal storage ability and good thermal reliability facilitated SA/PMMA to be considered as a viable candidate for thermal energy storage.The successful fabrication of SA/PMMA capsules indicates that ferric chloride is a prominent candidate for synthesizing PMMA containing PCM composite.

Inclusions modification by rare earth in steel and the resulting properties: A review

Rare earth(RE) elements are excellent modifiers for non-metallic inclusions that inevitably appear in steel and affect steel properties. This paper reviews the research status of inclusions modification by RE elements and the changes it cause on steel properties. First, the inclusion changes caused by RE modification are described. Generally, after adding pure RE, the main evolution of inclusions occurs as M →M + RE-Al-O → RE-Al-O + RE_(2)O_(2)S → RE_(2)O_(2)S + RE—S/RE_(2)O_(2)S + RE-O with an increase in the RE content(M represents the inclusions before RE addition). The type of final inclusion obtained after RE modification is related to the relative contents of S and O in the steel. Moreover, fine, regular, and uniformly distributed inclusions can be obtained with appropriate RE addition. However, the effectiveness of inclusions modification by adding both RE and non-RE elements is closely related to the order of their addition. Second, the applications and advantages of thermodynamic calculations in the study of RE-modified inclusions are introduced. Third, the changes in the corrosion resistance, impact properties,and other properties of steel caused by the modification of inclusions by RE are reviewed. Finally, the perspectives and trends of inclusions modified by RE elements in the steel industry are presented.

Synthesis of N-Alkane Mixture Microcapsule and Its Application in Low-Temperature Protective Fabric

We investigated synthesis and characterization of melamine-urea-formaldehyde（MUF） microcapsules containing n-alkane mixture as phase change core material for thermal energy storage and low-temperature protection. The phase change microcapsules（microPCMs） were prepared by an in situ polymerization using sodium dodecyl sulfate（SDS） and polyvinyl alcohol（PVA） as emulsifiers. Surface morphology, particle size, chemical structure, and thermal properties of microPCMs were, respectively, characterized by using scanning electron microscopy（SEM）, field emission scanning electron microscopy（FESEM）, Fourier transform infrared spectroscopy（FT-IR）, differential scanning calorimetry（DSC）, and thermal gravimetric analysis（TGA）. Low-temperature resistance performances were measured at-15,-30,-45, and-60 ℃ after microPCMs were coated on a cotton fabric by foaming technology. The results showed that spherical microPCMs had 4.4 μm diameter and 100 nm wall thickness. The melting and freezing temperatures and the latent heats of the microPCMs were determined as 28.9 and 29.6 ℃ as well as 110.0 and 115.7 J/g, respectively. Encapsulation of n-alkane mixture achieved 84.9 %. TGA analysis indicated that the microPCMs had good chemical stability below 250 ℃. The results showed that the microencapsulated n-alkane mixture had good energy storage potential. After the addition of 10 % microPCMs, low-temperature resistance duration was prolonged by 126.9%, 145.5%, 128.6%, and 87.5% in environment of-15,-30,-45 and-60 ℃, respectively as compared to pure fabric. Based on the results, phase change microcapsule plays an effective role in lowtemperature protection field for the human body.

The effect of physical property change on the water flooding development in Changqing oilfield Jurassic low permeability reservoir

Changqing old oilfield Jurassic reservoir's average calibration recovery is 24.7%,with geological reserves recovery of 16.6%,water cut of 65.2%.And most of Jurassic reservoirs are in the middle and later field life,part of them has entered the high water cut and high recovery stage.Traditional water flooding way for improving oil recovery becomes more difficult,and new method has to be considered.Maling oilfield BS district is a typical representative,with high water cut of 90.8%,high recovery percent of 26.1%and low oil recovery rate of 0.25%.To explore the new way to improve oil recovery,the polymer and surfactant(SP for short)important pilot test has been developed.The low permeability reservoir indoor core data in high water cut stage and inspection well results indicate that the reservoir permeability,pore combination characteristics and pore type changed greatly after long-term water flooding development.These changes bring more difficulties to the continue development,especially the high injection pressure,which can cause other problems for well pattern infilling and EOR.This paper takes the high injection pressure problem of Maling BS district Jurassic reservoir for example,analyzes the physical property change law on the following aspects:the development mode in the past,core analysis,formation sensitivity,interstitial matter,well test interpretation results,in order to help to further effective development and provide important parameters for tertiary oil recovery technique for similar reservoirs and others.