Channel Mismatching in Sidelobe Canceler: Limitations and Remedies

After a brief recall of the Sidelobe Canceler (SLC) working principle, including the derivation of a general formula for the Cancellation Ratio (CR), the effects of channel mismatching are investigated. In particular, curves providing CRvalues as a function of amplitude and phase channel mismatching, radar bandwidth, and jammer direction of arrival (JDOA) are provided for the cases of one and two auxiliary antennas. Subsequently, a time -space processor for performance restoration is analyzed in detail. In addition to the above mentioned quantities, the attainable CR value is expressed as a function of the space-time processor parameters. The contribution of the paper is related to the derivation of a number of mathematical equations of CR for several cases of practical interest for the radar engineer. In addition, several curves are presented to assist design of SLC systems.

Robust Blind Separation for MIMO Systems against Channel Mismatch Using Second-Order Cone Programming

To improve the deteriorated capacity gain and source recovery performance due to channel mismatch problem,this paper reports a research about blind separation method against channel mismatch in multiple-input multiple-output(MIMO) systems.The channel mismatch problem can be described as a channel with bounded fluctuant errors due to channel distortion or channel estimation errors.The problem of blind signal separation/extraction with channel mismatch is formulated as a cost function of blind source separation(BSS) subject to the second-order cone constraint,which can be called as second-order cone programing optimization problem.Then the resulting cost function is solved by approximate negentropy maximization using quasi-Newton iterative methods for blind separation/extraction source signals.Theoretical analysis demonstrates that the proposed algorithm has low computational complexity and improved performance advantages.Simulation results verify that the capacity gain and bit error rate(BER) performance of the proposed blind separation method is superior to those of the existing methods in MIMO systems with channel mismatch problem.

A Novel Algorithm for DOA Estimation in Asynchronous DS-CDMA Systems

A novel algorithm for DOA estimation using linear antenna array in the asynchronous DS-CDMA systems is presented in the presence of channel mismatches or signal fading between the sensors. Code-matched filters and parallel MUSIC algorithms are proposed to overcome the restriction that the number of array elements must exceeds the number of the sources for subspace-based direction of arrival. It can be shown that multiple access interference throughout the code-matched filter is asymptotically Gaussian in the asynchronous DS-CDMA systems. A relevant performance analysis is derived. Computer simulation proved the efficiency of the proposed algorithm.

Modeling of channel mismatch in time-interleaved SAR ADC

In a time-interleaved analog-to-digital converter （TI ADC）, several individual ADCs operate in parallel to achieve a higher sampling rate. Low power consumption as well as good linearity can be obtained by applying successive approximation register （SAR） converters as sub-channel ADCs. In spite of the advantages, this structure suffers from three mismatches, which are offset mismatch, gain mismatch, and time skew. This paper focuses on a TI SAR ADC with a number of channels. The mismatch effects in the frequency domain are analyzed and the derived close form formulas are verified based on Matlab. In addition, we clarify that the standard deviation of DNL and INL of an M-channel TI ADC is reduced by a factor of ~ compared to a single channel ADC. The formulas can be used to derive the corresponding requirements when designing a TI ADC. Our analysis process is able to inform the study of calibration algorithms.