The paper presents the results of biometrical study of the seeds and cones of larch taxa from Northeast of China. Fourteen characters are considered and their analyses showed that the seeds and cones of the larch taxa...The paper presents the results of biometrical study of the seeds and cones of larch taxa from Northeast of China. Fourteen characters are considered and their analyses showed that the seeds and cones of the larch taxa were relative greatly variable. Cluster analysis and principal component analysis for all 6 larch taxa were made. The analysis results proved that the dominant larch population in Toudao Farm fell within the range of variation ofLarix olgensis. The key taxonomic characters are the length of seed wing, length of cone, length of seed, the length/width ratio of seed and number of scales.展开更多
Stepwise selection approach was adopted to obtain glyphosate-tolerant upland cotton mutant(R1098) from the embryogenic calli of Coker 312(Gossypium hirsutum L.).The calli were transferred to selection medium and multi...Stepwise selection approach was adopted to obtain glyphosate-tolerant upland cotton mutant(R1098) from the embryogenic calli of Coker 312(Gossypium hirsutum L.).The calli were transferred to selection medium and multi-step selection pressure process was carried out until the展开更多
CaN nanorods are successfully fabricated by adjusting the flow rate ratio of hydrogen （H2）/nitrogen （N2） and growth temperature of the selective area growth （SAG） method with metal organic chemical vapor deposit...CaN nanorods are successfully fabricated by adjusting the flow rate ratio of hydrogen （H2）/nitrogen （N2） and growth temperature of the selective area growth （SAG） method with metal organic chemical vapor deposition （MOCVD）. The SAG template is obtained by nanospherical-lens photolithography. It is found that increasing the flow rate of 1-12 will change the CaN crystal shape from pyramid to vertical rod, while increasing the growth temperature will reduce the diameters of GaN rods to nanometer scale. Finally the CaN nanorods with smooth lateral surface and relatively good quality are obtained under the condition that the H2：N2 ratio is 1：1 and the growth temperature is 1030℃. The good crystal quality and orientation of GaN nanorods are confirmed by high resolution transmission electron microscopy. The cathodoluminescence spectrum suggests that the crystal and optical quality is also improved with increasing the temperature.展开更多
In a recent study by the National Association of Corrosion Engineers （NACE）, the global cost of corrosion was estimated to be US$ 2.5 trillion, equivalent to 3.4% of the global Gross Domestic Product [htto：//imtaca...In a recent study by the National Association of Corrosion Engineers （NACE）, the global cost of corrosion was estimated to be US$ 2.5 trillion, equivalent to 3.4% of the global Gross Domestic Product [htto：//imtacact.nace.org/]. The prevention practices could save between study found that implementing the best corrosion 15%-35% of the cost of damage. One of the important measures to reduce the corrosion damage is using an appropriate material. Selection of a suitable material according to corrosivity of the service environment is essentially important in battle against industrial corrosion. Corrosion detection, damage characterization and surface analysis are critical approaches to fundamental understanding of the root cause and detailed mechanism of corrosion. They lay a foundation for prevention and mitigation of material corrosion in service environments. A technical breakthrough in these fields may result in significantly widened applications of traditional and emerging materials.展开更多
文摘The paper presents the results of biometrical study of the seeds and cones of larch taxa from Northeast of China. Fourteen characters are considered and their analyses showed that the seeds and cones of the larch taxa were relative greatly variable. Cluster analysis and principal component analysis for all 6 larch taxa were made. The analysis results proved that the dominant larch population in Toudao Farm fell within the range of variation ofLarix olgensis. The key taxonomic characters are the length of seed wing, length of cone, length of seed, the length/width ratio of seed and number of scales.
文摘Stepwise selection approach was adopted to obtain glyphosate-tolerant upland cotton mutant(R1098) from the embryogenic calli of Coker 312(Gossypium hirsutum L.).The calli were transferred to selection medium and multi-step selection pressure process was carried out until the
基金Supported by the Key Program of the National Natural Science Foundation of China under Grant No 61334009the National High Technology Research and Development Program of China under Grant No 2014AA032604
文摘CaN nanorods are successfully fabricated by adjusting the flow rate ratio of hydrogen （H2）/nitrogen （N2） and growth temperature of the selective area growth （SAG） method with metal organic chemical vapor deposition （MOCVD）. The SAG template is obtained by nanospherical-lens photolithography. It is found that increasing the flow rate of 1-12 will change the CaN crystal shape from pyramid to vertical rod, while increasing the growth temperature will reduce the diameters of GaN rods to nanometer scale. Finally the CaN nanorods with smooth lateral surface and relatively good quality are obtained under the condition that the H2：N2 ratio is 1：1 and the growth temperature is 1030℃. The good crystal quality and orientation of GaN nanorods are confirmed by high resolution transmission electron microscopy. The cathodoluminescence spectrum suggests that the crystal and optical quality is also improved with increasing the temperature.
文摘In a recent study by the National Association of Corrosion Engineers （NACE）, the global cost of corrosion was estimated to be US$ 2.5 trillion, equivalent to 3.4% of the global Gross Domestic Product [htto：//imtacact.nace.org/]. The prevention practices could save between study found that implementing the best corrosion 15%-35% of the cost of damage. One of the important measures to reduce the corrosion damage is using an appropriate material. Selection of a suitable material according to corrosivity of the service environment is essentially important in battle against industrial corrosion. Corrosion detection, damage characterization and surface analysis are critical approaches to fundamental understanding of the root cause and detailed mechanism of corrosion. They lay a foundation for prevention and mitigation of material corrosion in service environments. A technical breakthrough in these fields may result in significantly widened applications of traditional and emerging materials.
