TEST METHOD OF HIGH-SPEED ON-OFF VALVE DYNAMIC CHARACTERISTICS

According to the valve port features of high speed on-off valve and its actions, the valve port can be simplified into an a-type half bridge construction. A method that tests the dynamic characteristics of the high speed on-off valve by the output pressure signal of the a-type half bridge is proposed. Having analyzed the factors related to the dynamic characteristics of an a-type half bridge, a rule for designing the outlet chamber＇s volume is worked out. According to the rule, a test stand is built to test the self-developed high-speed on-off valve. From the test results, it can be seen that with the outlet chamber＇s volume controlled by the rule the rise time of the pressure signals driven by signals with different frequencies changes very little. The test results conform to the simulation results, which nroves the correctness of the method.

Experimental research on hydrophilic characteristics of natural soft rock at high stress state

In order to study features of rock–water interaction, a self-developed experimental system called Intelligent Testing System for Water Absorption in Deep Soft Rocks(ITSWADSR) was utilized to analyze the hydrophilic behaviors of natural soft rock at high stress state. Combining X-ray diffraction and mercury injection test, main influencing factors on hydrophilic characteristics were studied. According to the results, it could be concluded as the following:(1) the effective porosity, and the content of illite, illite/smectite formation(S = 5%) and kaolinite have positive correlation with the water absorption capacity of rock; meanwhile, the initial moisture content, fractal dimension of effective pores, illite/smectite formation(S = 30%) and chlorite present negative correlation;(2) among the positive factors, the ascending order is kaolinite, illite/smectite formation(S = 5%) and illite;(3) the descending order among the negative factors are chlorite, illite/smectite formation(S = 30%) and fractal dimension of the effective pores;(4) influence of effective porosity on the pressurized water absorbing capacity of rock is minimal, while it is maximal in the process of no pressurized water absorption.

Nozzle test system for droplet deposition characteristics of orchard air-assisted sprayer and its application

In order to obtain nozzle droplet deposition characteristics for sprayer mechanical design and variable spraying control algorithms,a nozzle droplet deposition characteristics test system for air-assisted spraying was designed.The test system can supply a stable wind site with precisely controlled air speed whose speed control ranges from 2 m/s to 16 m/s with maximum relative error of 4.5%.It can spray out a certain amount of liquid pesticide with adjustable spraying pressure which can be controlled with high precision while the maximum relative error is only 1.33%.The distribution of droplet deposition can be collected and measured by using the acquisition device and a pesticide deposition optical measurement system.The experiment of two-dimensional nozzle flow measurement was carried out.The results show that nozzle flow distribution is uniform and symmetric with“double-hump”shape in the spray range.Multi-nozzle overlapped droplet deposition ranges from 85%to 116%relative to the average.The nozzle droplet deposition experiment was completed.The experiment results show that in air-assisted spraying,the higher the wind speed,the less droplet deposition is affected by gravity.When the wind speed is higher than 12 m/s and spraying distance is 0.80 m,droplet deposition is concentrated on the originally designated point and hardly affected by gravity.The horizontal spray width becomes smaller with higher wind speed.When the wind speed is high,it can be considered that nozzle deposition only focuses on the nozzle center,if the position requirement is not very high in orchard spraying.

Research on characters of surrounding rock in complex geology conditions and supporting time

The methods combined by test, field monitoring and theoretical analysis were adopted to do the systemic research on the rock mass from micro-structure to macro-deformation, and rheological model of Jinchuan rock mass was established to discuss the reasonable supporting time. Resuhs show that supporting after suitable stress and displacement release can benefit for the long-term stability of surrounding rock.

Plastic deformation behavior of Fe_(40)Ni_(40)P_(14)B_6 bulk metallic glass investigated by nanoindentation

Fe40Ni40P14B6 bulk metallic glass rods have been prepared by water quenching the fluxed alloy. The deformation behavior was investigated by nanoindentation tests and compressing tests. The average hardness and elastic modulus of the as-prepared Fe40Ni40P14B6 BMG (bulk metallic glass) measured by nanoindentation tests are 8.347 and 176.61 GPa respectively. The displace- ment-load curve shows “pop-in” characteristics which correspond to the loading rate bursts. Many shear bands around the indent were observed. The as-prepared Fe-based BMG exhibits a compressive plastic strain of 5.21%, which is much larger than that of other Fe-based glassy alloys and most of other BMGs.

Accuracy of Helicobacter pylori serology in two peptic ulcer populations and in healthy controls

AIM： To estimate the test characteristics of Heli- cobacter pylori （H pylori） serology and of C14-urea breath test （C14-UBT） in two different peptic ulcer populations and in community controls. Second, the aim was to explore the association between the level of Hpylori IgG antibodies and severity of inflammation as to active peptic ulceration in the same populations. METHODS： Vagotomized （n = 83）, medically treated peptic ulcer patients （n = 73） and one reference group of community controls （n = 88） were gastroscoped. H pylori status was determined by histology, bacterial growth, C14-UBT and serology. Based on the updated Sydney System, cumulative scores from biopsies from the prepyloruos, incisura angularis, corpus and fundus were calculated. RESULTS： The prevalence of Hpylori infection varied from 70% to 79%. The C14-UBT had high accuracy compared to the serology test. The sensitivity of the serology test was good, but the specificity was low （41%-71%）. The association between H pylori IgG antibodies and scores of gastric mucosal inflammation and current or previous peptic ulcer were weak. CONCLUSION： The accuracy of CI4-UBT to diagnose Hpylori infection was good, and the clinical utility of a negative H pylori serology test was substantial, while the gain in clinical information of a positive test was meagre. Positive H pylori titres could not distinguish between subjects with or those without active peptic ulceration.

Multiple Choice Items in Testing

Language testing is very important and necessary,and moreover as we all know,nowadays,in English language testing, the muhiple-choice item is most widely used and many users regard the multiple-choice item as the most flexible and probably the most effective of the objective item types.The multiple-choice item has its characteristics,advantages and disadvantages.We should bring out its strengths to make up for its weaknesses and use it appropriately.Although it has its limitations,it is suitable for large-scale tests and tests dealing with wide-range knowledge.We should correctly ap- ply testing principles and methods in order to make testing more effective and reliable.

Research on Modeling and Fuzzy Control of Magneto-Rheological Intelligent Buffer System for Impact Load

So far the magneto-rheological(MR) effect mechanism of MR damper has not been known completely, especially in the impact load,and the problem becomes more complicated and difficult for analyzing.A set of characteristic tests and parameters' identification are made to the MR damper by the experimental platform. The dynamical model of the damper is constructed based on the Bingham plastic model,and the buffer control strategy of aircraft undercarriage based on MR technology is established.Finally,the fuzzy control algorithm is applied to the process of automatic control for landing buffer of aircraft undercarriage.The simulation results show that the proposed MR damper pulley buffer can effectively recognize the impact energy.The research has a better application in the engineering.