Because of their unique mechanical and electrical properties,zinc oxide(ZnO)nanowires are used widely in microscopic and nanoscopic devices and structures,but characterizing them remains challenging.In this paper,two ...Because of their unique mechanical and electrical properties,zinc oxide(ZnO)nanowires are used widely in microscopic and nanoscopic devices and structures,but characterizing them remains challenging.In this paper,two pick-up strategies are proposed for characterizing the electrical properties of ZnO nanowires using SEM equipped with a nanomanipulator.To pick up nanowires efficiently,direct sampling is compared with electrification fusing,and experiments show that direct sampling is more stable while electrification fusing is more efficient.ZnO nanowires have cut-off properties,and good Schottky contact with the tungsten probes was established.In piezoelectric experiments,the maximum piezoelectric voltage generated by an individual ZnO nanowire was 0.07 V,and its impedance decreased with increasing input signal frequency until it became stable.This work offers a technical reference for the pick-up and construction of nanomaterials and nanogeneration technology.展开更多
Flower-like ZnO microstructures were successfully produced using a hydrothermal method employing ZnSO_(4)/(NH_(4))_(2)SO_(4) as a raw material.The effect of the operating parameters of the hydrothermal temperature, OH...Flower-like ZnO microstructures were successfully produced using a hydrothermal method employing ZnSO_(4)/(NH_(4))_(2)SO_(4) as a raw material.The effect of the operating parameters of the hydrothermal temperature, OH^(-)/Zn^(2+) molar ratio, time, and amount of dispersant on the phase structure and micromorphology of the ZnO particles were investigated.The synthesis conditions of the flower-like ZnO microstructures were: hydrothermal temperature of 160℃, OH^(-)/Zn^(2+) molar ratio of 5:1, reaction time of 4 h, and 4 mL of dispersant.The flower-like ZnO microstructures were comprised of hexagon-shaped ZnO rods arranged in a radiatively.Degradation experiments of Rhodamine B with the flower-like ZnO microstructures demonstrated a degradation efficiency of 97.6% after 4 h of exposure to sunshine, indicating excellent photocatalytic capacity.The growth mechanism of the flower-like ZnO microstructures was presented.展开更多
The ferrites of Cuo-ZnO-Fe2o3 solid solution series near the molar ratio of ZnxCu1-x were prepared by direct heating of their coprecipitated hydroxides using NH4OH as precipitating agent where x=0.0, 0.2, 0.5, 0.8 and...The ferrites of Cuo-ZnO-Fe2o3 solid solution series near the molar ratio of ZnxCu1-x were prepared by direct heating of their coprecipitated hydroxides using NH4OH as precipitating agent where x=0.0, 0.2, 0.5, 0.8 and 1.0. Additional amounts of Cu and Zn sulphates were added to compensate the loss during the coprecipitation of the hydroxides. The ferritized samples were characterized by chemical analysis, XRD. DTA, TGA and SEM. XRD of both Zn0.2Cu0.8Fe2O4 and Zn0.5Cu0.5 Fe2O4 that indicates the formation of a heterogeneous ferrite material of ZnFe2O4 and CuFe2O4 mixed with variable amounts of α-Fe2O3. Zn and Cu ferrites were observed only in Zn0.8Cu0.2Fe2O4.From TGA-time relation, the activation energy of the different transformation phases were calculated. It is found that, the activation energy of ZnFe2O4 is slightly equal to 3/2 of that for CuFe2O4. Dielectric measurements show that the electrical behaviour depends on the ordering and disordering of the phases.展开更多
Due to the high specific capacity and energy density, lithium–sulfur battery is regarded as a potential energy storage conversion system. However, the serious shuttle effect and the sluggish electrochemical reaction ...Due to the high specific capacity and energy density, lithium–sulfur battery is regarded as a potential energy storage conversion system. However, the serious shuttle effect and the sluggish electrochemical reaction kinetics impede the practical use of lithium–sulfur battery. In the interests of breaking through the above knotty problems, herein we propose to use the polar flower-like Zn O modified by Bi OI nanoparticles as bifunctional host with catalytic and adsorption ability for polysulfides in lithium–sulfur battery.It can be found that this adsorption/catalytic host integrates the functions of adsorption and mutual catalytic conversion of polysulfides, in which the polar flower-like Zn O can effectively capture the polysulfides through strong polar-polar interaction, simultaneously the BiOI nanoparticles can accelerate the mutual conversion of polysulfides to Li2 S through reducing the activation energy and conversion energy barrier required for the electrochemical reaction. As a result, under a sulfur loading of 2.5 mg cm^(-2), the lithium–sulfur battery with Zn O/Bi OI/CNT/S as cathode reveals a considerable initial specific capacity of1267 mAh g^(-1) at a current density of 0.1 C. Even the current density increased to 1 C, the capacity can reach as 873.4 mAh g^(-1), together with a good capacity retention of 67.1% after 400 cycles. Therefore,after systematically study the positive effects of the flower-like ZnO modified by catalytic BiOI nanoparticles on the adsorption and catalytic conversion of polysulfides, this work provides a new idea for the development and application of high-performance lithium–sulfur batteries.展开更多
Uniform circinate aggregates of sheet ZnO nanoparticles with a specific surface area of 24 m^2·g^-1 were prepared by the direct precipitation method.The circinate aggregates were hexagonal ZnO,with the wall thick...Uniform circinate aggregates of sheet ZnO nanoparticles with a specific surface area of 24 m^2·g^-1 were prepared by the direct precipitation method.The circinate aggregates were hexagonal ZnO,with the wall thickness ranging from 0.5 to 1 μm and the diameter ranging from 5 to 10 μm.The backs of the circinate aggregates were regularly arranged by numerous sheet ZnO nanoparticles with a thickness of 30-80 nm and a diameter of 300-400 nm.The precursors were aggregates of sheet Zn5（CO3）2（OH）6 nanoparticles,which were decomposed into ZnO by calcining in air in the range of 200-285°C,and the ZnO retained the similar special structure.The C2H5OH content had a significant effect on the formation of sheet ZnO.The centripetal force,the Van der Waals force,and the hydrogen bond were deduced as the driving forces of the formation of circinate.展开更多
ZnO nanoparticles(ZnO-NP)present innovative optical,electrical,and magnetic properties that depend on spe-cific characteristics,e.g.,size,distribution,and morphology.Thus,these properties are essential to address vari...ZnO nanoparticles(ZnO-NP)present innovative optical,electrical,and magnetic properties that depend on spe-cific characteristics,e.g.,size,distribution,and morphology.Thus,these properties are essential to address various applications in areas such as electronics,medicine,energy,and others.In addition,the performance of this ZnO-NP depends of their preparation which can be done by chemical,physical,and biological methods.Meanwhile,nowadays,the main interest in developing ZnO-NP synthesis through biological methods bases on the decrease of use of toxic chemicals or energy applied to the procedures,making the process more cost-effective and environ-mentally friendly.However,the large-scale production of nanoparticles by green synthesis remains a big challenge due to the complexity of the biological extracts used in chemical reactions.That being the case,the preparation of ZnO-NP using Moringa oleifera extract as an alternative biological agent for capping and reduction in synthesis was evaluated in this work.Then,the results based on the analysis of the optical and structural characterization of the ZnO-NP obtained by employing UV-Vis,DLS,zeta potential,XRD,ATR-FTIR,and FE-SEM indicate mostly the presence of spherical nanosized material with a mean hydrodynamic diameter of 47.2 nm measured by DLS and a mean size diameter of 25 nm observed with FE-SEM technique.Furthermore,in FE-SEM images a homo-geneous dispersion and distribution is observed in the absence of agglutination,agglomeration,or generation of significant lumps of the ZnO-NP.The XRD analysis showed that heat annealing induced the crystallite size favor-ing their monocrystallinity.Those obtained data confirm the synthesis of ZnO-NP and the absence of impurities associated with organic compounds in the annealed samples.Finally,those results and low-cost production pre-sent to the synthesized ZnO-NP by this biological method as a useful material in several applications.展开更多
The ZnO-Ag core-shell ultrafine particle in ethanol was prepared by photoreduction and colloidal methods. The experimental results obtained from aboorption spectroscopy. fluorescence sopectroscopy and electron microsc...The ZnO-Ag core-shell ultrafine particle in ethanol was prepared by photoreduction and colloidal methods. The experimental results obtained from aboorption spectroscopy. fluorescence sopectroscopy and electron microscopy revealed that the structure of the hybrid wide ig ZnO core covered with Ag shell. The thickness of the silver layer can ho controlled by the concentration of Ag+ ions and the time of UV irradiation. The structure of the electric double layer of the ZnO seed greatly affects the formation of ZnO-Ag hybtid particle.展开更多
基金supported by the Research Fund Program of the Guangdong Provincial Key Laboratory of Fuel Cell Technology。
文摘Because of their unique mechanical and electrical properties,zinc oxide(ZnO)nanowires are used widely in microscopic and nanoscopic devices and structures,but characterizing them remains challenging.In this paper,two pick-up strategies are proposed for characterizing the electrical properties of ZnO nanowires using SEM equipped with a nanomanipulator.To pick up nanowires efficiently,direct sampling is compared with electrification fusing,and experiments show that direct sampling is more stable while electrification fusing is more efficient.ZnO nanowires have cut-off properties,and good Schottky contact with the tungsten probes was established.In piezoelectric experiments,the maximum piezoelectric voltage generated by an individual ZnO nanowire was 0.07 V,and its impedance decreased with increasing input signal frequency until it became stable.This work offers a technical reference for the pick-up and construction of nanomaterials and nanogeneration technology.
基金financially supported by the Funding of Shenyang Ligong University’s Research Support Program for High-level Talents (No.1010147000802)the National Natural Science Foundation of China (Nos.52004165 and 51774070)。
文摘Flower-like ZnO microstructures were successfully produced using a hydrothermal method employing ZnSO_(4)/(NH_(4))_(2)SO_(4) as a raw material.The effect of the operating parameters of the hydrothermal temperature, OH^(-)/Zn^(2+) molar ratio, time, and amount of dispersant on the phase structure and micromorphology of the ZnO particles were investigated.The synthesis conditions of the flower-like ZnO microstructures were: hydrothermal temperature of 160℃, OH^(-)/Zn^(2+) molar ratio of 5:1, reaction time of 4 h, and 4 mL of dispersant.The flower-like ZnO microstructures were comprised of hexagon-shaped ZnO rods arranged in a radiatively.Degradation experiments of Rhodamine B with the flower-like ZnO microstructures demonstrated a degradation efficiency of 97.6% after 4 h of exposure to sunshine, indicating excellent photocatalytic capacity.The growth mechanism of the flower-like ZnO microstructures was presented.
文摘The ferrites of Cuo-ZnO-Fe2o3 solid solution series near the molar ratio of ZnxCu1-x were prepared by direct heating of their coprecipitated hydroxides using NH4OH as precipitating agent where x=0.0, 0.2, 0.5, 0.8 and 1.0. Additional amounts of Cu and Zn sulphates were added to compensate the loss during the coprecipitation of the hydroxides. The ferritized samples were characterized by chemical analysis, XRD. DTA, TGA and SEM. XRD of both Zn0.2Cu0.8Fe2O4 and Zn0.5Cu0.5 Fe2O4 that indicates the formation of a heterogeneous ferrite material of ZnFe2O4 and CuFe2O4 mixed with variable amounts of α-Fe2O3. Zn and Cu ferrites were observed only in Zn0.8Cu0.2Fe2O4.From TGA-time relation, the activation energy of the different transformation phases were calculated. It is found that, the activation energy of ZnFe2O4 is slightly equal to 3/2 of that for CuFe2O4. Dielectric measurements show that the electrical behaviour depends on the ordering and disordering of the phases.
基金supported financially by the National Key Research and Development Program of China (2018YFB0104200)the Key Project of Strategic New Industry of Hunan Province (No. 2019GK2032)。
文摘Due to the high specific capacity and energy density, lithium–sulfur battery is regarded as a potential energy storage conversion system. However, the serious shuttle effect and the sluggish electrochemical reaction kinetics impede the practical use of lithium–sulfur battery. In the interests of breaking through the above knotty problems, herein we propose to use the polar flower-like Zn O modified by Bi OI nanoparticles as bifunctional host with catalytic and adsorption ability for polysulfides in lithium–sulfur battery.It can be found that this adsorption/catalytic host integrates the functions of adsorption and mutual catalytic conversion of polysulfides, in which the polar flower-like Zn O can effectively capture the polysulfides through strong polar-polar interaction, simultaneously the BiOI nanoparticles can accelerate the mutual conversion of polysulfides to Li2 S through reducing the activation energy and conversion energy barrier required for the electrochemical reaction. As a result, under a sulfur loading of 2.5 mg cm^(-2), the lithium–sulfur battery with Zn O/Bi OI/CNT/S as cathode reveals a considerable initial specific capacity of1267 mAh g^(-1) at a current density of 0.1 C. Even the current density increased to 1 C, the capacity can reach as 873.4 mAh g^(-1), together with a good capacity retention of 67.1% after 400 cycles. Therefore,after systematically study the positive effects of the flower-like ZnO modified by catalytic BiOI nanoparticles on the adsorption and catalytic conversion of polysulfides, this work provides a new idea for the development and application of high-performance lithium–sulfur batteries.
基金supported by the National Natural Science Foundation of China(No.50374021).
文摘Uniform circinate aggregates of sheet ZnO nanoparticles with a specific surface area of 24 m^2·g^-1 were prepared by the direct precipitation method.The circinate aggregates were hexagonal ZnO,with the wall thickness ranging from 0.5 to 1 μm and the diameter ranging from 5 to 10 μm.The backs of the circinate aggregates were regularly arranged by numerous sheet ZnO nanoparticles with a thickness of 30-80 nm and a diameter of 300-400 nm.The precursors were aggregates of sheet Zn5（CO3）2（OH）6 nanoparticles,which were decomposed into ZnO by calcining in air in the range of 200-285°C,and the ZnO retained the similar special structure.The C2H5OH content had a significant effect on the formation of sheet ZnO.The centripetal force,the Van der Waals force,and the hydrogen bond were deduced as the driving forces of the formation of circinate.
基金Authors are grateful to Concytec-Peru and The World Bank for the financial support of this project under the call“Mejoramiento y Ampliacion de los Servicios del Sistema Nacional de Ciencia Tecnologia e Innovación Tecnologica”8682-PE,through Fondecyt Grant 017-2019 FONDECYT BM INC.INV.
文摘ZnO nanoparticles(ZnO-NP)present innovative optical,electrical,and magnetic properties that depend on spe-cific characteristics,e.g.,size,distribution,and morphology.Thus,these properties are essential to address various applications in areas such as electronics,medicine,energy,and others.In addition,the performance of this ZnO-NP depends of their preparation which can be done by chemical,physical,and biological methods.Meanwhile,nowadays,the main interest in developing ZnO-NP synthesis through biological methods bases on the decrease of use of toxic chemicals or energy applied to the procedures,making the process more cost-effective and environ-mentally friendly.However,the large-scale production of nanoparticles by green synthesis remains a big challenge due to the complexity of the biological extracts used in chemical reactions.That being the case,the preparation of ZnO-NP using Moringa oleifera extract as an alternative biological agent for capping and reduction in synthesis was evaluated in this work.Then,the results based on the analysis of the optical and structural characterization of the ZnO-NP obtained by employing UV-Vis,DLS,zeta potential,XRD,ATR-FTIR,and FE-SEM indicate mostly the presence of spherical nanosized material with a mean hydrodynamic diameter of 47.2 nm measured by DLS and a mean size diameter of 25 nm observed with FE-SEM technique.Furthermore,in FE-SEM images a homo-geneous dispersion and distribution is observed in the absence of agglutination,agglomeration,or generation of significant lumps of the ZnO-NP.The XRD analysis showed that heat annealing induced the crystallite size favor-ing their monocrystallinity.Those obtained data confirm the synthesis of ZnO-NP and the absence of impurities associated with organic compounds in the annealed samples.Finally,those results and low-cost production pre-sent to the synthesized ZnO-NP by this biological method as a useful material in several applications.
文摘The ZnO-Ag core-shell ultrafine particle in ethanol was prepared by photoreduction and colloidal methods. The experimental results obtained from aboorption spectroscopy. fluorescence sopectroscopy and electron microscopy revealed that the structure of the hybrid wide ig ZnO core covered with Ag shell. The thickness of the silver layer can ho controlled by the concentration of Ag+ ions and the time of UV irradiation. The structure of the electric double layer of the ZnO seed greatly affects the formation of ZnO-Ag hybtid particle.
