Layered lanthanum silver antimonide LaAgSb_(2)exhibits both charge density wave(CDW)order and Dirac-cone-like band structure at ambient pressure.Here,we systematically investigate the pressure evolution of structural ...Layered lanthanum silver antimonide LaAgSb_(2)exhibits both charge density wave(CDW)order and Dirac-cone-like band structure at ambient pressure.Here,we systematically investigate the pressure evolution of structural and electronic properties of LaAgSb_(2)single crystal.We show that the CDW order is destabilized under compression,as evidenced by the gradual suppression of magnetoresistance.At P_(C)~22 GPa,synchrotron x-ray diffraction and Raman scattering measurements reveal a structural modification at room-temperature.Meanwhile,the sign change of the Hall coefficient is observed at 5 K.Our results demonstrate the tunability of CDW order in the pressurized LaAgSb_(2)single crystal,which can be helpful for its potential applications in the next-generation devices.展开更多
The hydrogen distribution curve along cross-section of high pressure hydrogen charged spec- imens of 21Cr-7Ni-9Mn-N austenitic steel was obtained quantitatively by IMMA(Ion Microprobe Mass Analyzer).Thus the hydrogen ...The hydrogen distribution curve along cross-section of high pressure hydrogen charged spec- imens of 21Cr-7Ni-9Mn-N austenitic steel was obtained quantitatively by IMMA(Ion Microprobe Mass Analyzer).Thus the hydrogen solubility and diffusivity may be measured, and the hydrogen permeability and other parameters may be calculated indirectly.The hydrogen distribution in specimens either long-term aged in air or in electron beam weld seam after high pressure hydrogen charging was also examined.展开更多
The corrosion behavior of C110 bushing at high temperature and high pressure with a high H2S / CO2 was studied, and a basis for the materials selection of sour gas well bushing was provided in H2S, CO2 and saline coex...The corrosion behavior of C110 bushing at high temperature and high pressure with a high H2S / CO2 was studied, and a basis for the materials selection of sour gas well bushing was provided in H2S, CO2 and saline coexisting environment. Under acidic condiction, hydrogen atoms greatly entered into the material and caused the material properties changed. Weight loss method was used to study the corrosion rate of hydrogen charging samples and original untreated samples in simulated oil field environment. PAR2273 electrochemical workstation was used to examine the electrochemical performance of samples untreated, hydrogen charging after reacting in autoclave. The corrosion product film was observed through SEM. The experimental results show that sample with hydrogen charging has a much more obvious partial corrosion and pitting corrosion than the untreated blank sample even the downhole corrosion speed of bushing is increased after being used for a period of time. Polarization curve shows the corrosion tendency is the same between sample with or without hydrogen charging and corrosion tendency is reduced by corrosion product film. A layer of dense product film formed on the surface of samples provides a certain protective effect to the matrix, but cracked holes which will accelerate partial corrosion of the sample were also observed.展开更多
By means of a coaxial apparatus, microsecond charging have been carried out with ferent ethylene glycol concentrations of ethylene pressurized water breakdown experiments with different surface roughness of electrodes...By means of a coaxial apparatus, microsecond charging have been carried out with ferent ethylene glycol concentrations of ethylene pressurized water breakdown experiments with different surface roughness of electrodes and difglycol/water mixture. The experimental results about the breakdown stress and the effective time are presented. The breakdown stress is normalized to the situation that the effective time is transformed to 1 μs and analyzed. The conclusions are as follows： （1） the breakdown stress formula is modified to E = 0.561MA^-1/10teff^-1/^NP^1/8 ;（2） the coefficient M is significantly increased by surface polishing and ethylene glycol additive; （3） it is accumulative for the capacity of improving electrical breakdown strength for surface polishing, ethylene glycol additive, and pressurization, of which pressurization is the most effective method; （4） the highest stress of 235.5 kV/cm is observed in ethylene glycol/water mixture with an ethylene glycol concentration of 80% at a hydrostatic pressure of 1215.9 kPa and is about one time greater than that in pure water at constant pressure; （5） for pressurization and surface polishing, the primary mechanism to improve the breakdown strength of water dielectric is the increase in the breakdown time delay. Research results indicate great potential in the application of the high power pulse conditioning system of water dielectric.展开更多
Regulators are important components in pneumatic system, and their flow-rate characteristics are the key parameters for designers. According to the correlatively international standard and national standard of China, ...Regulators are important components in pneumatic system, and their flow-rate characteristics are the key parameters for designers. According to the correlatively international standard and national standard of China, which describe the flow-rate characteristics measurement method of pneumatic regulators, the pressure and the flow are measured point by point, and then the flow-rate characteristics curve is plotted point to point. This method has some disadvantages, such as equipment complexity, much air consumption, and low efficiency. To settle the problems presented above, this paper puts forward a new high efficient and energy saving flow-rate characteristics measurement method of regulators, which is based on the pressure response when charging and discharging to an isothermal tank without any flow meters. The measurement principle, the system and the steps are introduced. And the tracking differentiator is used for the data processing of the pressure difference. Two typical kinds of regulators were experimentally investigated, and their flow-rate characteristics curves were obtained with the new and the conventional method, respectively. Comparatively, it＇s proved that this new method is feasible because it is not only able to meet the demand of the measurement precision, but also to save energy and improve efficiency. Compared to the conventional method, the new method takes only about 1/10 amount of time and consumes about only 1/30 amount of air. Hopefully it will be able to serve as an international standard of flow-rate characteristics measurement method of regulators.展开更多
Recently, many seminal papers deal with the syntheses, stability and superconducting properties of super-hydrides like LaH10 or YH10 under high pressure, reporting critical temperatures near room temperature. In the f...Recently, many seminal papers deal with the syntheses, stability and superconducting properties of super-hydrides like LaH10 or YH10 under high pressure, reporting critical temperatures near room temperature. In the first run one will assume that the involved metal atoms contribute a number of 3 electrons to the pairing pool corresponding to their valence. However, another possibility may be that the cationic valence is somewhat smaller, for instance only 2.29, resulting in a nominal electron number per cation of σ0 = 0.229 ≈ 3/13 instead of 0.3. Then, we will have a numerical equality to the optimum hole number in the cuprate high-Tc superconductors, a number that reflects the fractal nature of electronic response in superconductors. However, if one still keeps up the oxidation state of +3 of lanthanum, one will need 13 hydrogen atoms to match the optimum σ0. Such composition may be found at the phase boundary between the observed LaH10 and LaH16 phases. Partial ionic replacement is suggested to shift the super-hydride composition into the σ0 optimum. Micro-structural phenomena such as multiple twinning and ferroelastic behavior as observed with cuprates may also influence the superconductivity of super-hydrides. Finally, epitaxial growth of super-hydrides onto a specially cut diamond substrate is proposed.展开更多
The intricate correlation between charge degrees of freedom and physical properties is a fascinating area of research in solid state chemistry and condensed matter physics.Herein,we report on the pressureinduced succe...The intricate correlation between charge degrees of freedom and physical properties is a fascinating area of research in solid state chemistry and condensed matter physics.Herein,we report on the pressureinduced successive charge transfer and accompanied resistive evolution in honeycomb layered ruthenate AgRuO_(3).Structural revisiting and spectroscopic analyses affirm the ilmenite type R-3 structure with mixed valence cations as Ag^(+1/+2)Ru^(+4/+5)O_(3) at ambient pressure.In-situ pressure-and temperature-dependent resistance variation reveals a successive insulatormetal-insulator transition upon pressing,accompanied by unprecedented charge transfer between Ag and Ru under applied pressure,and a further structural phase transition in the insulator region at higher pressure.These phenomena are also corroborated by in-situ pressure-dependent Raman spectra,synchrotron X-ray diffraction,bond valence sums,and electronic structure calculations,emphasizing the dominated rare Ag2+,and near zero thermal expansion in the ab-plane in the metallic zone mostly due to the Jahn-Teller effect of d9-Ag2+.The multiple electronic instabilities in AgRuO_(3) may offer new possibilities toward novel and unconventionally physical and chemical behaviors in strongly correlated honeycomb lattices.展开更多
基金the National Key Research and Development Program of China(Grant Nos.2018YFA0305700,2017YFA0403600,and2016YFA0401804)the National Natural Science Foundation of China(Grant Nos.U1632275,U19A2093,U1932152,U1632162,12004004,11874362,11804344,11704387,and 11674325)+4 种基金the Natural Science Foundation of Anhui Province,China(Grant Nos.1908085QA18,2008085QA40,and1808085MA06)the Users with Excellence Project of Hefei Science Center CAS(Grant Nos.2018HSC-UE012,2020HSC-CIP014,2020HSC-UE015,and2021HSC-UE008)the Major Program of Development Foundation of Hefei Center for Physical Science and Technology(Grant No.2018ZYFX002)supported by the High Magnetic Field Laboratory of Anhui Province(Grant No.AHHM-FX-2020-02)supported by the Youth Innovation Promotion Association of Chinese Academy of Sciences(Grant No.2020443)。
文摘Layered lanthanum silver antimonide LaAgSb_(2)exhibits both charge density wave(CDW)order and Dirac-cone-like band structure at ambient pressure.Here,we systematically investigate the pressure evolution of structural and electronic properties of LaAgSb_(2)single crystal.We show that the CDW order is destabilized under compression,as evidenced by the gradual suppression of magnetoresistance.At P_(C)~22 GPa,synchrotron x-ray diffraction and Raman scattering measurements reveal a structural modification at room-temperature.Meanwhile,the sign change of the Hall coefficient is observed at 5 K.Our results demonstrate the tunability of CDW order in the pressurized LaAgSb_(2)single crystal,which can be helpful for its potential applications in the next-generation devices.
文摘The hydrogen distribution curve along cross-section of high pressure hydrogen charged spec- imens of 21Cr-7Ni-9Mn-N austenitic steel was obtained quantitatively by IMMA(Ion Microprobe Mass Analyzer).Thus the hydrogen solubility and diffusivity may be measured, and the hydrogen permeability and other parameters may be calculated indirectly.The hydrogen distribution in specimens either long-term aged in air or in electron beam weld seam after high pressure hydrogen charging was also examined.
基金Funded by the National Natural Science Foundation of China(No. 50904050)the Basic Projects of Sichuan Province(2011JY0106)the Postdoctoral Science Foundation(20110490810)
文摘The corrosion behavior of C110 bushing at high temperature and high pressure with a high H2S / CO2 was studied, and a basis for the materials selection of sour gas well bushing was provided in H2S, CO2 and saline coexisting environment. Under acidic condiction, hydrogen atoms greatly entered into the material and caused the material properties changed. Weight loss method was used to study the corrosion rate of hydrogen charging samples and original untreated samples in simulated oil field environment. PAR2273 electrochemical workstation was used to examine the electrochemical performance of samples untreated, hydrogen charging after reacting in autoclave. The corrosion product film was observed through SEM. The experimental results show that sample with hydrogen charging has a much more obvious partial corrosion and pitting corrosion than the untreated blank sample even the downhole corrosion speed of bushing is increased after being used for a period of time. Polarization curve shows the corrosion tendency is the same between sample with or without hydrogen charging and corrosion tendency is reduced by corrosion product film. A layer of dense product film formed on the surface of samples provides a certain protective effect to the matrix, but cracked holes which will accelerate partial corrosion of the sample were also observed.
基金National 863 Project of China (No. 807-2020, 803-5051)
文摘By means of a coaxial apparatus, microsecond charging have been carried out with ferent ethylene glycol concentrations of ethylene pressurized water breakdown experiments with different surface roughness of electrodes and difglycol/water mixture. The experimental results about the breakdown stress and the effective time are presented. The breakdown stress is normalized to the situation that the effective time is transformed to 1 μs and analyzed. The conclusions are as follows： （1） the breakdown stress formula is modified to E = 0.561MA^-1/10teff^-1/^NP^1/8 ;（2） the coefficient M is significantly increased by surface polishing and ethylene glycol additive; （3） it is accumulative for the capacity of improving electrical breakdown strength for surface polishing, ethylene glycol additive, and pressurization, of which pressurization is the most effective method; （4） the highest stress of 235.5 kV/cm is observed in ethylene glycol/water mixture with an ethylene glycol concentration of 80% at a hydrostatic pressure of 1215.9 kPa and is about one time greater than that in pure water at constant pressure; （5） for pressurization and surface polishing, the primary mechanism to improve the breakdown strength of water dielectric is the increase in the breakdown time delay. Research results indicate great potential in the application of the high power pulse conditioning system of water dielectric.
文摘Regulators are important components in pneumatic system, and their flow-rate characteristics are the key parameters for designers. According to the correlatively international standard and national standard of China, which describe the flow-rate characteristics measurement method of pneumatic regulators, the pressure and the flow are measured point by point, and then the flow-rate characteristics curve is plotted point to point. This method has some disadvantages, such as equipment complexity, much air consumption, and low efficiency. To settle the problems presented above, this paper puts forward a new high efficient and energy saving flow-rate characteristics measurement method of regulators, which is based on the pressure response when charging and discharging to an isothermal tank without any flow meters. The measurement principle, the system and the steps are introduced. And the tracking differentiator is used for the data processing of the pressure difference. Two typical kinds of regulators were experimentally investigated, and their flow-rate characteristics curves were obtained with the new and the conventional method, respectively. Comparatively, it＇s proved that this new method is feasible because it is not only able to meet the demand of the measurement precision, but also to save energy and improve efficiency. Compared to the conventional method, the new method takes only about 1/10 amount of time and consumes about only 1/30 amount of air. Hopefully it will be able to serve as an international standard of flow-rate characteristics measurement method of regulators.
文摘Recently, many seminal papers deal with the syntheses, stability and superconducting properties of super-hydrides like LaH10 or YH10 under high pressure, reporting critical temperatures near room temperature. In the first run one will assume that the involved metal atoms contribute a number of 3 electrons to the pairing pool corresponding to their valence. However, another possibility may be that the cationic valence is somewhat smaller, for instance only 2.29, resulting in a nominal electron number per cation of σ0 = 0.229 ≈ 3/13 instead of 0.3. Then, we will have a numerical equality to the optimum hole number in the cuprate high-Tc superconductors, a number that reflects the fractal nature of electronic response in superconductors. However, if one still keeps up the oxidation state of +3 of lanthanum, one will need 13 hydrogen atoms to match the optimum σ0. Such composition may be found at the phase boundary between the observed LaH10 and LaH16 phases. Partial ionic replacement is suggested to shift the super-hydride composition into the σ0 optimum. Micro-structural phenomena such as multiple twinning and ferroelastic behavior as observed with cuprates may also influence the superconductivity of super-hydrides. Finally, epitaxial growth of super-hydrides onto a specially cut diamond substrate is proposed.
基金supported by the National Science Foundation of China(grant nos.NSFC-22090041,21875287,U1932217,11974246,12004252,12025408,11921004,11974432,and 92165204)the Program for Guangdong Introducing Innovative and Entrepreneurial Teams(grant no.2017ZT07C069)NKRDPC-2017YFA0206203,NKRDPC-2018YFA0306001.
文摘The intricate correlation between charge degrees of freedom and physical properties is a fascinating area of research in solid state chemistry and condensed matter physics.Herein,we report on the pressureinduced successive charge transfer and accompanied resistive evolution in honeycomb layered ruthenate AgRuO_(3).Structural revisiting and spectroscopic analyses affirm the ilmenite type R-3 structure with mixed valence cations as Ag^(+1/+2)Ru^(+4/+5)O_(3) at ambient pressure.In-situ pressure-and temperature-dependent resistance variation reveals a successive insulatormetal-insulator transition upon pressing,accompanied by unprecedented charge transfer between Ag and Ru under applied pressure,and a further structural phase transition in the insulator region at higher pressure.These phenomena are also corroborated by in-situ pressure-dependent Raman spectra,synchrotron X-ray diffraction,bond valence sums,and electronic structure calculations,emphasizing the dominated rare Ag2+,and near zero thermal expansion in the ab-plane in the metallic zone mostly due to the Jahn-Teller effect of d9-Ag2+.The multiple electronic instabilities in AgRuO_(3) may offer new possibilities toward novel and unconventionally physical and chemical behaviors in strongly correlated honeycomb lattices.
