The Li3V2（PO4）3/C composite cathode material was synthesized via sol-gel method using three different chelating agents （citric acid, salicylic acid and polyacrylic acid） at pH value of 3 or 7. The crystal structur...The Li3V2（PO4）3/C composite cathode material was synthesized via sol-gel method using three different chelating agents （citric acid, salicylic acid and polyacrylic acid） at pH value of 3 or 7. The crystal structure, morphology, specific surface area and electrochemical performance of the prepared samples were investigated by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, cyclic voltammetry （CV）, electrochemical impedance spectroscopy （EIS） and galvanostatic charge/discharge test. The results show that the effects of pH value on the performance of the prepared materials are greatly related to the chelating agents. With salicylic acid or polyacrylic acid as the chelating reagent, the structure, morphology and electrochemical performance of the samples are greatly influenced by the pH values. However, the structure of the materials with citric acid as the chelating agent does not change as pH value changes, and the materials own uniform particle size distribution and good electrochemical performance. It delivers an initial discharge capacity of 113.58 mA·h/g at 10C, remaining as high as 108.48 mA·h/g after 900 cycles, with a capacity retention of 95.51%.展开更多
用溶胶-凝胶法制得Cu/Fe2O3-TiO2光催化材料。用XRD、Ram an、TPR、IR、TEM、UV-V is DRS测试技术和光催化反应等对固体材料的结构和性能进行了表征。结果表明,Fe2O3的质量分数为10%时,在TiO2表面以单分子层分散,Fe2O3的引入使TiO2吸光...用溶胶-凝胶法制得Cu/Fe2O3-TiO2光催化材料。用XRD、Ram an、TPR、IR、TEM、UV-V is DRS测试技术和光催化反应等对固体材料的结构和性能进行了表征。结果表明,Fe2O3的质量分数为10%时,在TiO2表面以单分子层分散,Fe2O3的引入使TiO2吸光限蓝移。Fe2O3含量超过单分子层分散时,有晶相Fe2O3生成,光吸收性能下降。Fe—O—Ti键的形成加强了半导体之间的相互作用,有利于光生载流子在半导体间的输送。少量Cu的引入,使复合材料的吸光域向可见光范围扩展。光催化反应性能与材料的光响应能力密切相关。在光催化CO2和CH3NH2直接合成NH2CH2COOH的反应中,负载质量分数为10%Fe2O3的光催化反应性能最优。在120℃、常压、空速200 h-1、CO2与CH3NH2摩尔比为1∶1和6.5×10-4W/cm2的紫外灯照射下,CH3NH2转化率为1.35%,NH2CH2COOH选择性达92.0%。展开更多
基金Project(2007BAQ01055)supported by the National Key Technology R&D Program of ChinaProject(2011SCU11081)supported by the Sichuan University Funds for Young Scientists,ChinaProject(20120181120103)supported by Ph.D.Programs Foundation of the Ministry of Education of China
文摘The Li3V2（PO4）3/C composite cathode material was synthesized via sol-gel method using three different chelating agents （citric acid, salicylic acid and polyacrylic acid） at pH value of 3 or 7. The crystal structure, morphology, specific surface area and electrochemical performance of the prepared samples were investigated by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, cyclic voltammetry （CV）, electrochemical impedance spectroscopy （EIS） and galvanostatic charge/discharge test. The results show that the effects of pH value on the performance of the prepared materials are greatly related to the chelating agents. With salicylic acid or polyacrylic acid as the chelating reagent, the structure, morphology and electrochemical performance of the samples are greatly influenced by the pH values. However, the structure of the materials with citric acid as the chelating agent does not change as pH value changes, and the materials own uniform particle size distribution and good electrochemical performance. It delivers an initial discharge capacity of 113.58 mA·h/g at 10C, remaining as high as 108.48 mA·h/g after 900 cycles, with a capacity retention of 95.51%.
文摘用溶胶-凝胶法制得Cu/Fe2O3-TiO2光催化材料。用XRD、Ram an、TPR、IR、TEM、UV-V is DRS测试技术和光催化反应等对固体材料的结构和性能进行了表征。结果表明,Fe2O3的质量分数为10%时,在TiO2表面以单分子层分散,Fe2O3的引入使TiO2吸光限蓝移。Fe2O3含量超过单分子层分散时,有晶相Fe2O3生成,光吸收性能下降。Fe—O—Ti键的形成加强了半导体之间的相互作用,有利于光生载流子在半导体间的输送。少量Cu的引入,使复合材料的吸光域向可见光范围扩展。光催化反应性能与材料的光响应能力密切相关。在光催化CO2和CH3NH2直接合成NH2CH2COOH的反应中,负载质量分数为10%Fe2O3的光催化反应性能最优。在120℃、常压、空速200 h-1、CO2与CH3NH2摩尔比为1∶1和6.5×10-4W/cm2的紫外灯照射下,CH3NH2转化率为1.35%,NH2CH2COOH选择性达92.0%。
