期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
岩溶水系统的水化学曲线及其在水文地质研究中的应用 被引量:20
1
作者 姜光辉 郭芳 于奭 《吉林大学学报(地球科学版)》 EI CAS CSCD 北大核心 2015年第3期899-907,共9页
为了认识水文地质条件与岩溶泉水化学之间的关系,以西南地区的6个典型岩溶水系统丫吉试验场S31号泉、毛村地下河、官村地下河、陈旗岩溶泉、青木关地下河以及金佛山水房泉为例进行研究。通过对比发现,在这些强烈非均质的山区裸露型岩溶... 为了认识水文地质条件与岩溶泉水化学之间的关系,以西南地区的6个典型岩溶水系统丫吉试验场S31号泉、毛村地下河、官村地下河、陈旗岩溶泉、青木关地下河以及金佛山水房泉为例进行研究。通过对比发现,在这些强烈非均质的山区裸露型岩溶水系统中,仪器能够实现自动化监测的电导率、温度和pH值等指标的水化学曲线存在差异。分析可知控制水化学变化的主要因素如下:首先是降雨补给引起系统的水量与碳酸盐岩溶解过程的变化;其次是CO2气体随降雨进入含水层,促进碳酸盐岩的溶解;最后是地表污染物的淋滤。当电导率、水温、pH曲线出现降低和碳酸盐岩矿物饱和指数下降时,反映的是岩溶水的稀释作用;当电导率曲线出现高峰时,反映的是岩溶水补给的CO2效应,此时水中二氧化碳分压(pCO2)升高;当场雨中水化学曲线的变化滞后于水文动态曲线时,反映的是岩溶管道的活塞流效应;与人类活动有关的NO-3等污染物质量浓度在降雨后出现高峰,反映土壤的降雨淋滤作用,并可能影响电导率的变化趋势。某个系统的水化学曲线趋向于经常出现某几种效应,并且彼此的类型不同,表明了降雨补给的面状渗流方式和集中灌入方式对岩溶水影响的强弱不同,以及系统在径流方式和调蓄机制上的差异。一般而言:以面状补给方式为主的系统,水化学曲线多表现为CO2效应,较少出现稀释作用;而岩溶发育强烈的系统,降雨补给受控于溶蚀裂隙和管道,其水化学曲线较多出现稀释作用,较少出现CO2效应;以管道为主要径流方式的系统易出现活塞流效应,而包气带厚度大和含水层储水能力强的系统水化学变化被减弱。 展开更多
关键词 岩溶水系统 水化学曲线 含水层补给 水文地质调查 地下河
下载PDF
A general thermodynamic analysis and treatment of phases and components in the analysis of phase assemblages in multicomponent systems 被引量:1
2
作者 HU JiaWen 《Science China Earth Sciences》 SCIE EI CAS 2012年第8期1371-1382,共12页
Systematic thermodynamic analysis reveals that an essential condition for the thermodynamically valid chemographic projec-tions proposed by Greenwood is completely excessive.In other words,the phases or components fro... Systematic thermodynamic analysis reveals that an essential condition for the thermodynamically valid chemographic projec-tions proposed by Greenwood is completely excessive.In other words,the phases or components from which the projection is made need not be pure,nor have their chemical potentials fixed over the whole chemographic diagram.To facilitate the analy-sis of phase assemblages in multicomponent systems,all phases and components in the system are divided into internal and external ones in terms of their thermodynamic features and roles,where the external phases are those common to all assem-blages in the system,and the external components include excess components and the components whose chemical potentials(or relevant intensive properties of components) are used to define the thermodynamic conditions of the system.This general classification overcomes the difficulties and defects in the previous classifications,and is easier to use than the previous ones.According to the above classification,the phase rule is transformed into a new form.This leads to two findings:(1) the degree of freedom of the system under the given conditions is only determined by the internal components and phases;(2) different external phases can be identified conveniently according to the conditions of the system before knowing the real phase rela-tions.Based on the above results,a simple but general approach is proposed for the treatment of phases and components:all external phases and components can be eliminated from the system without affecting the phase relations,where the external components can be eliminated by appropriate chemographic projections.The projections have no restriction on the states of the phases or the chemical potentials of components from which the projections are made.The present work can give a unified ex-planation of the previous treatments of phases and components in the analysis of phase assemblages under various specific conditions.It helps to avoid potential misunderstandings or errors in the topological analysis of phase relations. 展开更多
关键词 chemographic projection compatibility diagram phase rule excess component excess phase
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部