Review of Iron-Based Catalysts for Carbon Dioxide Fischer-Tropsch Synthesis

Capturing and utilizing CO_(2)from the production process is the key to solving the excessive CO_(2)emission problem. CO_(2)hydrogenation with green hydrogen to produce olefins is an effective and promising way to utilize CO_(2)and produce valuable chemicals. The olefins can be produced by CO_(2)hydrogenation through two routes, i.e., CO_(2)-FTS (carbon dioxide Fischer- Tropsch synthesis) and MeOH (methanol-mediated), among which CO_(2)-FTS has significant advantages over MeOH in practical applications due to its relatively high CO_(2)conversion and low energy consumption potentials. However, the CO_(2)-FTS faces challenges of difficult CO_(2)activation and low olefins selectivity. Iron-based catalysts are promising for CO_(2)-FTS due to their dual functionality of catalyzing RWGS and CO-FTS reactions. This review summarizes the recent progress on iron-based catalysts for CO_(2)hydrogenation via the FTS route and analyzes the catalyst optimization from the perspectives of additives, active sites, and reaction mechanisms. Furthermore, we also outline principles and challenges for rational design of high-performance CO_(2)-FTS catalysts.

A critical review towards the causes of the iron-based catalysts deactivation mechanisms in the selective oxidation of hydrogen sulfide to elemental sulfur from biogas

Hydrogen sulfide(H_(2)S) not only presents significant environmental concerns but also induces severe corrosion in industrial equipment,even at low concentrations.Among various technologies,the selective oxidation of hydrogen sulfide(SOH_(2)S) to elemental sulfur(S) has emerged as a sustainable and environmentally friendly solution.Due to its unique properties,iron oxide has been extensively investigated as a catalyst for SOH_(2)S;however,rapid deactivation has remained a significant drawback.The causes of iron oxide-based catalysts deactivation mechanisms in SOH_(2)S,including sulfur or sulfate deposition,the transformation of iron species,sintering and excessive oxygen vacancy formation,and active site loss,are thoroughly examined in this review.By focusing on the deactivation mechanisms,this review aims to provide valuable insights into enhancing the stability and efficiency of iron-based catalysts for SOH_(2)S.

Effect of Manganese Incorporation Manner on an Iron-Based Catalyst for Fischer-Tropsch Synthesis

A systematic study was undertaken to investigate the effects of the manganese incorporation manner on the textural properties, bulk and surface phase compositions, reduction/carburization behaviors, and surface basicity of an iron-based Fischer-Tropsch synthesis （FTS） catalyst. The catalyst samples were characterized by N2 physisorption, X-ray photoelectron spectroscopy （XPS）, H2 （or CO） temperature-programmed reduction （TPR）, CO2 temperature-programmed desorption （TPD）, and M5ssbauer spectroscopy. The FTS performance of the catalysts was studied in a slurry-phase continuously stirred tank reactor （CSTR）. The characterization results indicated that the manganese promoter incorporated by using the coprecipitation method could improve the dispersion of iron oxide, and decrease the size of the iron oxide crystallite. The manganese incorporated with the impregnation method is enriched on the catalyst＇s surface. The manganese promoter added with the impregnation method suppresses the reduction and carburization of the catalyst in H2, CO, and syngas because of the excessive enrichment of manganese on the catalyst surface. The catalyst added manganese using the coprecipitation method has the highest CO conversion （51.9%） and the lowest selectivity for heavy hydrocarbons （C12＋）.

Effect of Al_2O_3 Binder on the Precipitated Iron-Based Catalysts for Fischer-Tropsch Synthesis

A series of iron-based Fischer-Tropsch synthesis （FTS） catalysts incorporated with Al2O3 binder were prepared by the combination of co-precipitation and spray drying technology. The catalyst samples were characterized by using N2 physical adsorption, temperature-programmed reduction/desorption （TPR/TPD） and MSssbauer effect spectroscopy （MES） methods. The characterization results indicated that the BET surface area increases with increasing Al2O3 content and passes through a maximum at the Al2O3/Fe ratio of 10/100 （weight basis）. After the point, it decreases with further increase in Al2O3 content. The incorporation of Al2O3 binder was found to weaken the surface basicity and suppress the reduction and carburization of iron-based catalysts probably due to the strong K-Al2O3 and Fe-Al2O3 interactions. Furthermore, the H2 adsorption ability of the catalysts is enhanced with increasing Al2O3 content. The FTS performances of the catalysts were tested in a slurry-phase continuously stirred tank reactor （CSTR） under the reaction conditions of 260 ℃, 1.5 MPa, 1000 h^-1 and molar ratio of H2/CO 0.67 for 200 h. The results showed that the addition of small amounts of Al2O3 affects the activity of iron-based catalysts to a little extent. However, with further increase of Al2O3 content, the FTS activity and water gas shift reaction （WGS） activity are decreased severely. The addition of appropriate Al2O3 do not affect the product selectivity, but the catalysts incorporated with large amounts of Al2O3 have higher selectivity for light hydrocarbons and lower selectivity for heavy hydrocarbons.

Effect of Addition Sequence during Neutralization and Precipitation on Iron-based Catalysts for High Temperature Shift Reaction

The preparation of the iron-based catalysts promoted by cobalt with a small amount of copper and aluminum for the high temperature shift reaction （HTS） with different sequences of adding catalyst raw materials during neutralization and precipitation was investigated. XRD, BET and particle size distribution （PSD） were used to characterize the prepared catalysts. It was found that the catalyst crystals were all γ-Fe2O3, and the intermediate of the catalyst after aging was Fe3O4. The crystallographic form of the catalyst and its intermediate was not affected by the addition sequence in the neutralization and precipitation process. The results showed that the specific surface area and the particle size of the catalysts depended on the addition sequence to the mother liquor. Cobalt with a small amount of copper and aluminum could increase the specific surface area and decrease the particle size of catalysts.

Promoter effect on the CO_2-H_2O formation during Fischer-Tropsch synthesis on iron-based catalysts

The effects of Mg,La and Ca promoters on primary and secondary CO2 and H2O formation pathways during Fischer-Tropsch synthesis on precipitated Fe/Cu/SiO2 catalysts are investigated.The chemisorbed oxygen atoms in the primary pathway formed in the CO dissociation steps reacted with co-adsorbed hydrogen or carbon monoxide to produce H2O and CO2,respectively.The secondary pathway was the water-gas shift reaction.The results indicated that the CO2 production led to an increase in both primary and secondary pathways,and H2O production decreased when surface basicity of the catalyst increased in the order Ca 〉 Mg 〉 La.

KINETICS OF IRON-BASED CATALYST IN TEMPERATURE-PROGRAMMED REDUCTION

In this work, Temperature-Programmed Reduction Processes of iron oxide and 12 other kinds of promoted iron oxides were investigated. It is suggested that the reduction activation energy can be expressed as a normal distribution. The distribution parameters were obtained by kinetic data fitting, which depends on the chemical and geometric characteristics of both the iron oxide and the promoter.

Physico-chemical structure evolution characteristics of coal char during gasification in the presence of iron-based waste catalyst

The present study aims to explore the physico-chemical structure evolution characteristic during Yangchangwan bituminous coal(YCW)gasification in the presence of iron-based waste catalyst(IWC).The catalytic gasification reactivity of YCW was measured by thermogravimetric analyzer.Scanning electron microscope–energy dispersive system,nitrogen adsorption analyzer and laser Raman spectroscopy were employed to analyze the char physico-chemical properties.The results show that the optimal IWC loading ratio was 5 wt%at 1000°C.The distribution of IWC on char was uneven and Fe catalyst concentrated on the surface of some chars.The specific surface area of YCW gasified semi-char decreased significantly with the increase of gasification time.i.e.,the specific surface area reduced from 382 m2/g(0 min)to 192 m2/g(3 min),meanwhile,the number of micropores and mesopores decreased sharply at the late gasification stage.The carbon microcrystalline structure of YCW gasified semi-char was gradually destroyed with the increase of gasification time,and the microcrystalline structure with small size was gradually generated,resulting in the decreasing order degree of carbon microcrystalline structure.IWC can catalyze YCW gasification which could provide theoretical guidance for industrial solid waste recycling.

Direct decomposition of nitric oxide in low temperature over iron-based perovskite-type catalyst modified by Ru

Iron-based perovskite-type compounds modified by Ru were prepared through sol-gel process to study its catalytic activity of NOx direct decomposition at low temperature and evaluate the conversion of NO under the experimental conditions. The catalytic activity of La 0.9Ce 0.1Fe 0.8-nCo 0.2RunO3 （n=0.01,0.03,0.05,0.07,0.09）series for the NO, NO-CO two components, CO-HC-NO three components were also analyzed. The catalytic investigation evidenced that the presence of Ru is necessary for making highly activity in decomposition of nitric oxide even at low temperature（400 ℃）and La 0.9Ce 0.9Fe 0.75Co 0.2Ru 0.05O3 （n=0.05） has better activity in all the samples, the conversion of it is 58.5%. With the reducing gas（CO,C3H6）added into the gas, the catalyst displayed very high activity in decomposition of NO and the conversion of it is 80% and 92.5% separately.

POLYMERIZATION MECHANISM OF N-VINYLCARBAZOLE WITH CHIRALLY ORGANIC SALT AS CATALYST

The polymerization mechanism is described by the conductance change with the time during the polymerization. The mechanism can be explained by the equilibrium feature (i.e. main ion-pairs) between the free ions and the ion-pairs dissociated by the organic salt (-) Sp*(+)(+) CSA*(-) (An asterisk represents the chirality) and the scheme of the polymerization process is described mainly by the charge transfer complexes having chiral induction power.

Enantioselective Alternating Copolymerization of Propylene with Carbon Monoxide Using Cationic Palladium-Chiral Diphosphine Catalyst

Enantioselective alternating copolymerization of carbon monoxide with propylene was carried out using palladium catalyst modified by 1,4-3,6-dianhydro-2,5-dideoxy-2,5-bis (diphenylphosphino)-L-iditol (DDPPI). The chiral diphosphine was proved to be effective at enantioselective copolymerization. Optical rotation, elemental analysis, H-1, C-13-NMR and IR spectra showed that the copolymer was optically active, isotactic, alternating poly(1,4-ketone) structure.

Thiazolidine Derivatives as Chiral Catalysts in the Enantioselective Addition of Diethylzinc to Benzaldehyde

Four types of chiral thiazolidine derivatives were synthesized conveniently from natural L-cysteine and showed good enantioselectivity in up to 90% ee in the addition of diethylzine to benzaldehyde. Their enantioselectivity was affected by the bulkiness of R and the thiazolidine ring systems in their molecules.

DESIGN OF POLYMER-SUPPORTEDCHIRAL CATALYSTS

Some structural factors to the design of polymer-supported Chiral Catalysts arediscussed, and some new approaches for designing of polymer-supported catalysts arereviewed in this paper

Towards advanced removal of organics in persulfate solution by heterogeneous iron-based catalyst:A review

Heterogeneous iron-based catalysts have drawn increasing attention in the advanced oxidation of persulfates due to their abundance in nature,the lack of secondary pollution to the environment,and their low cost over the last a few years.In this paper,the latest progress in the research on the activation of persulfate by heterogeneous iron-based catalysts is reviewed from two aspects,in terms of synthesized catalysts(Fe0,Fe_(2)O_(3),Fe_(3)O_(4),FeOOH)and natural iron ore catalysts(pyrite,magnetite,hematite,siderite,goethite,ferrohydrite,ilmenite and lepidocrocite)focusing on efforts made to improve the performance of catalysts.The advantages and disadvantages of the synthesized catalysts and natural iron ore were summarized.Particular interests were paid to the activation mechanisms in the catalyst/PS/pollutant system for removal of organic pollutants.Future research challenges in the context of field application were also discussed.

2-甲酰基-1,1′-联萘手性醛催化剂的合成

目前报道的手性醛催化剂(3)的合成路线总收率较低,不适用于大量合成。通过对3的合成路线进行改进,以(S)-1,1′-联二萘酚((S)-BINOL)为原料,经磺酰化、插羰反应、偶联反应、硼化、氧化、甲氧基甲基保护、还原、氧化、脱除甲氧基甲基以及溴化10步反应合成了手性醛催化剂(3a~3i),其中大部分化合物的总收率大于20%。该合成路线可放大到10 mmol规模来进行,具有一定的应用前景。

Size dependence of carbon-encapsulated iron-based nanocatalysts for Fischer–Trposch synthesis

The conversion from syngas derived from non-petroleum recourses to liquid fuels and chemicals via Fischer–Tropsch synthesis(FTS)is regarded as an alternative and potential route.Developing catalyst with controllable particle size and clarifying size effect are of significance to promote the process.Herein,we engineered carbon-encapsulation structure to restrict particle growth but avoid strong metal–support interactions.The prepared carbon-encapsulated nanoparticles(Fe@C)showed a superior catalytic activity compared with conventional carbon-supported nanoparticles(Fe/C).By tuning particle size from 3.0 to 9.1 nm,a volcano-like trend of iron time yield(FTY)peaked at 2659μmol·gFe^(−1)·s^(−1)is obtained with an optimum particle size of 5.3 nm.According to temperature-programmed reduction and desorption results,a linear relationship between apparent turnover frequency and CO dissociation capacity was established.The enhanced CO dissociative adsorption along with weakened H_(2)activation on larger nanoparticles resulted in higher C_(5+)selectivity.This study provides a strategy to synthesize carbon supported metal catalysts with controllable particle size and insight into size effect on Fe-based catalytic FTS.

Effect of nano-particle size on product distribution and kinetic parameters of Fe/Cu/La catalyst in Fischer-Tropsch synthesis

Effects of nano-particle size on hydrocarbon production rates and distributions for precipitated Fe/Cu/La catalysts in Fischer-Tropsch synthesis were investigated.Nano-structured iron catalyst was prepared by micro-emulsion method.The concept of two superimposed AndersonSchulz-Flory （ASF） distributions has been applied for the representation of the effects of reaction conditions and nano-particles size on kinetics parameters and product distributions.These results reveal that by reducing the particle size of catalyst,the break in ASF distributions was decreased.Also useful different kinetics equations for synthesis of C3 to C9 and C10 to C22 were determined by using α1 and α2 chain growth probabilities.

Fischer-Tropsch synthesis by nano-structured iron catalyst

Effects of nanoscale iron oxide particles on textural structure,reduction,carburization and catalytic behavior of precipitated iron catalyst in Fischer-Tropsch synthesis（FTS） are investigated.Nanostructured iron catalysts were prepared by microemulsion method in two series.Firstly,Fe2O3 ,CuO and La2O3 nanoparticles were prepared separately and were mixed to attain Fe/Cu/La nanostructured catalyst（sep-nano catalyst）;Secondly nanostructured catalyst was prepared by co-precipitation in a water-in-oil microemulsion method（mix-nano catalyst）.Also,conventional iron catalyst was prepared with common co-precipitation method.Structural characterizations of the catalysts were performed by TEM,XRD,H2 and CO-TPR tests.Particle size of iron oxides for sep-nano and mix-nano catalysts,which were determined by XRD pattern（Scherrer equation） and TEM images was about 20 and 21.6 nm,respectively.Catalyst evaluation was conducted in a fixed-bed stainless steel reactor and compared with conventional iron catalyst.The results revealed that FTS reaction increased while WGS reaction and olefin/paraffin ratio decreased in nanostructured iron catalysts.

Deactivation studies of nano-structured iron catalyst in Fischer-Tropsch synthesis

A nano-structured iron catalyst for syngas conversion to hydrocarbons in Fischer-Tropsch synthesis（FTS） was prepared by micro-emulsion method.Compositions of bulk iron phase and phase transformations of carbonaceous species during catalyst deactivation in FTS reaction were characterized by temperature-programmed surface reaction with hydrogen（TPSR-H 2 ）,and XRD techniques.Many carbonaceous species on surface and bulk of the nano-structured iron catalysts were completely identified by combined TPSR-H 2 and XRD spectra and which were compared with those recorded on conventional co-precipitated iron catalyst.The results reveal that the catalyst deactivation results from the formation of inactive carbide phases and surface carbonaceous species like graphite,and it will be increased when the particle size of iron oxides was reduced in FTS iron catalyst.

Fischer–Tropsch synthesis over iron catalysts with corncob-derived promoters

A sustainable strategy for Fischer–Tropsch iron catalysts is successfully achieved by embedding of synergistic promoters from a renewable resource, corncob. The iron-based catalysts, named as 'corncob-driven'catalysts, are composed of iron species supported on carbon as primary active components and various minerals(K, Mg, Ca, and Si, etc.) as promoters. The corncob-driven catalysts are facilely synthesized by a one-pot hydrothermal treatment under mild conditions. The characterization results indicate that the formation of iron carbides from humboldtine is clearly enhanced and the morphology of catalyst particles tends to be more regular microspheres after adding corncob. It is observed that the optimized corncob-driven catalyst exhibits a higher conversion than without promoters' catalyst in Fischer–Tropsch synthesis(ca. 73% vs. ca. 49%). More importantly, a synergistic effect exists in multiple promoters from corncob that can enhance heavy hydrocarbons selectivity and lower CO_2 selectivity, obviously different from the catalyst with promoters from chemicals. The proposed synthesis route of corncob-driven catalysts provides new strategies for the utilization of renewable resources and elimination of environmental pollutants from chemical promoters.