A natural polymer catalyst, silica-supported chitosan palladium complex (abbr. as SiO2-CS-Pd) was found to catalyze the hydrogenation of phenol and cresols to corresponding cyclohexanones in high yield and 100% select...A natural polymer catalyst, silica-supported chitosan palladium complex (abbr. as SiO2-CS-Pd) was found to catalyze the hydrogenation of phenol and cresols to corresponding cyclohexanones in high yield and 100% selectivity at 70 degrees C and 1.01325 x 10(5) Pa mild conditions. N/Pd molar ratio in the complex, temperature and solvents have much influence on the reaction. The reactivity order of reactants was found to be: phenol >m->p->o- The catalyst is stable during the reaction and could be repeatedly used for several times without much decrease in its catalytic activity.展开更多
Chitosan–metal complexes have been widely studied in wastewater treatment, but there are still various factors in complex preparation which are collectively responsible for improving the adsorption capacity need to b...Chitosan–metal complexes have been widely studied in wastewater treatment, but there are still various factors in complex preparation which are collectively responsible for improving the adsorption capacity need to be further studied. Thus, this study investigates the factors affecting the adsorption ability of chitosan–metal complex adsorbents, including various kinds of metal centers, different metal salts and crosslinking degree. The results show that the chitosan–Fe( Ⅲ) complex prepared by sulfate salts exhibited the best adsorption efficiency(100%) for various dyes in very short time duration(10 min), and its maximum adsorption capacity achieved 349.22 mg/g. The anion of the metal salt which was used in preparation played an important role to enhance the adsorption ability of chitosan–metal complex. SO4^(2-) ions not only had the effect of crosslinking through electrostatic interaction with amine group of chitosan polymer, but also could facilitate the chelation of metal ions with chitosan polymer during the synthesis process.Additionally, the p H sensitivity and the sensitivity of ionic environment for chitosan–metal complex were analyzed. We hope that these factors affecting the adsorption of the chitosan–metal complex can help not only in optimizing its use but also in designing new chitosan–metal based complexes.展开更多
文摘A natural polymer catalyst, silica-supported chitosan palladium complex (abbr. as SiO2-CS-Pd) was found to catalyze the hydrogenation of phenol and cresols to corresponding cyclohexanones in high yield and 100% selectivity at 70 degrees C and 1.01325 x 10(5) Pa mild conditions. N/Pd molar ratio in the complex, temperature and solvents have much influence on the reaction. The reactivity order of reactants was found to be: phenol >m->p->o- The catalyst is stable during the reaction and could be repeatedly used for several times without much decrease in its catalytic activity.
基金supported by the National Natural Science Foundation of China (No. 21407021)the Shanghai Yang-Fan Program of Science and Technology Commission of Shanghai (No. 14YF1405000)+1 种基金the National Key Research and Development Program of China (No. 2016YFC0400501)the Fundamental Research Funds for the Central Universities and DHU Distinguished Young Professor Program
文摘Chitosan–metal complexes have been widely studied in wastewater treatment, but there are still various factors in complex preparation which are collectively responsible for improving the adsorption capacity need to be further studied. Thus, this study investigates the factors affecting the adsorption ability of chitosan–metal complex adsorbents, including various kinds of metal centers, different metal salts and crosslinking degree. The results show that the chitosan–Fe( Ⅲ) complex prepared by sulfate salts exhibited the best adsorption efficiency(100%) for various dyes in very short time duration(10 min), and its maximum adsorption capacity achieved 349.22 mg/g. The anion of the metal salt which was used in preparation played an important role to enhance the adsorption ability of chitosan–metal complex. SO4^(2-) ions not only had the effect of crosslinking through electrostatic interaction with amine group of chitosan polymer, but also could facilitate the chelation of metal ions with chitosan polymer during the synthesis process.Additionally, the p H sensitivity and the sensitivity of ionic environment for chitosan–metal complex were analyzed. We hope that these factors affecting the adsorption of the chitosan–metal complex can help not only in optimizing its use but also in designing new chitosan–metal based complexes.