Molecular packing tuning via chlorinated end group enables efficient binary organic solar cells over 18.5%

Designing novel nonfullerene acceptors(NFAs)is of vital importance for the development of organic solar cells(OSC).Modification on the side chain and end group are two powerful tools to construct efficient NFAs.Here,based on the high-performance L8BO,we selected 3-ethylheptyl to substitute the inner chain of 2-ethylhexyl,obtaining the backbone of BON3.Then we introduced different halogen atoms of fluorine and chlorine on 2-(3-oxo-2,3-dihydro-1Hinden-1-ylidene)malononitrile end group(EG)to construct efficient NFAs named BON3-F and BON3-Cl,respectively.Polymer donor D18 was chosen to combine with two novel NFAs to construct OSC devices.Impressively,D18:BON3-Cl-based device shows a remarkable power conversion efficiency(PCE)of 18.57%,with a high open-circuit voltage(V_(OC))of 0.907 V and an excellent fill factor(FF)of 80.44%,which is one of the highest binary PCE of devices based on D18 as the donor.However,BON3-F-based device shows a relatively lower PCE of 17.79%with a decreased FF of 79.05%.The better photovoltaic performance is mainly attributed to the red-shifted absorption,higher electron and hole mobilities,reduced charge recombination,and enhanced molecular packing in the D18:BON3-Cl films.Also,we performed stability tests on two binary systems;the D18:BON3-Cl and D18:BON3-F devices maintain 88.1%and 85.5%of their initial efficiencies after 169 h of storage at 85°C in an N2-filled glove box,respectively.Our work demonstrates the importance of selecting halogen atoms on EG and provides an efficient binary system of D18:BON3-Cl for further improvement of PCE.

Residual Levels and New Inputs of Chlorinated POPs in Agricultural Soils from Taihu Lake Region

Selected persistent organochlorine pesticides (OCPs), including 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) and its principal metabolites 1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene (DDE) and 1,1-dichloro-2,2-bis(p-chlorophenyl)e- thane (DDD), hexachlorocyclohexane (HCH) and its isomers (α-,β-, γ-, and δ-HCH), hexachlorobenzene (HCB), endo- sulfan, dieldrin, and endrin were quantified to determine current levels of organochlorine pesticides, to assess the eco- toxicological potential, and to distin…

Chlorinated butyl rubber/two-step modified montmorillonite nanocomposites:Mechanical and damping properties

Montmorillonite(MMT) was modified by ultrasound and castor oil quaternary ammonium salt intercalation method to prepare a new type of organic montmorillonite(OMMT). The surface structure, particle morphology, interlayer distance, and thermal behavior of the samples obtained were characterized. The modified OMMT was then added to chlorinated butyl rubber(CIIR) by mechanical blending, and a composite material with excellent damping properties was obtained. The mechanical experiment results of CIIR nanocomposites showed that the addition of OMMT improved their tensile strength, hardness,and stress relaxation rate. Compared with pure CIIR, when the content of OMMT was 5 phr(part per hundred of rubber), the tensile strength of the nanocomposite was increased by 677% and the elongation at break was also increased by 105.4%. The enhancement of this performance was mainly due to the dispersion of the nanosheets in CIIR rubber and the chemical interaction between the organoclay and the polymer matrix, which was confirmed by morphology and spectral analysis. OMMT also endowed a positive effect on the damping properties of CIIR nanocomposites. After adding 5 phr of OMMT, the nanocomposite owned the best damping performance, and the damping factor, tanδmax, was 37.9% higher than that of pure CIIR. Therefore, the good damping and mechanical properties of these CIIR nanocomposites provided some novel and promising methods for preparing high-damping rubber in a wide temperature range.

Prescreening teratogenic potential of chlorinated drinking water disinfection by-products by using Hydra regeneration assay

Practicability of method for the Hydra regeneration assay on the prescreening teratogenic potential of chlorinated drinking water disinfection by products was studied through both the assays of toxicity of adult Hydra (T) and inhibition of the growth of regeneration Hydra (I) by using chloroform, dichloromethane and chloroacetic acid. The results showed that T 50 / I 50 ratios of chloroform and chloroacetic acid were 2 77 and 6 16 respectively, with teratogenic potential. T 50 / I 50 ratio of dichloromethane was 1.69, with weaker teratogenic potential. These experimental results indicated preliminarily that the Hydra regeneration assay has certainly applied value as a prescreening assay for developmental toxicity.

Dechlorination of Chlorinated Aliphatic Compounds by Micro-scale Al-Zn-Mg/Fe Powders as Advanced Zero-valent Iron

Micro-scale Al-Zn-Mg/Fe composite powders (MAF) with high reactivity and good storage properties were prepared by reducing iron onto the surface of Al-Zn-Mg alloy powders. Experimental results show that MAF as advanced zero-valent iron are highly effective for degradation of chlorinated organic compounds. The efficiency of degradation for carbon tetrachloride and perchloroethylene is higher than 99% within a period of 2 h. The efficiency of degradation for trichloroethylene by MAF after storing for one month is equivalent to that by freshly prepared nano-size zero-valent iron particles.

UV enhanced gas–solid synthesis of chlorinated poly vinyl chloride characterized by a UV–Vis online analysis method

Dynamic characteristics of UV enhanced gas–solid PVC chlorination process were revealed by a UV–Vis spectral online analysis method. Experimental results showed an instantaneous increase of the chlorination rate as soon as UV light was affiliated, which demonstrated the intensified effect of UV radiation on PVC chlorination directly.Different affiliation methods of UV light were then studied, proving that continuous UV radiation could enhance the chlorination process significantly while intermittent UV radiation was able to initiate the chlorination reaction once it was conducted. Besides, experiments were carried out to study the influences of parameters on the chlorination process such as UV wavelength, chlorination temperature, partial pressure of chlorine gas and PVC raw materials. Among all the parameters, chlorination temperature and partial pressure of chlorine gas were testified as two key factors to determine the chlorination performance. Thermal analysis of CPVC products showed that their corresponding properties such as the glass transition temperature(Tg) and the homogeneity of chlorine distribution in polymer phase were improved with the increase of chlorine content.

Biodegradability of Chlorinated Anilines in Waters

Objective To identify the bacteria tolerating chlorinated anilines and to study the biodegradability of o-chloroaniline and its coexistent compounds. Methods Microbial community of complex bacteria was identified by plate culture observation techniques and Gram stain method. Bacterial growth inhibition test was used to determine the tolerance of complex bacteria to toxicant. Biodegradability of chlorinated anilines was determined using domesticated complex bacteria as an inoculum by shaking-flask test. Results The complex bacteria were identified, consisting of Xanthomonas, Bacillus alcaligenes, Acinetobacter, Pseudomonas, and Actinomycetaceae nocardia. The obtained complex bacteria were more tolerant to o-chloroaniline than mixture bacteria in natural river waters. The effects of exposure concentration and inoculum size on the biodegradability of o-chloroaniline were analyzed, and the biodegradation characteristics of single o-chloroaniline and 2, 4-dichloroaniline were compared with the coexistent compounds. Conclusion The biodegradation rates can be improved by decreasing concentration of compounds and increasing inoculum size of complex bacteria. When o-chloroaniline coexists with aniline, the latter is biodegraded prior to the former, and as a consequence the metabolic efficiency of o-chloroaniline is improved with the increase of aniline concentration. Meanwhile, when o-chloroaniline coexists with 2,4-dichloroaniline, the metabolic efficiency of 2,4-dichloroaniline is markedly improved.

TOXICITY OF CHLORINATED BENZENES TO MARINE ALGAE

Growth of Chlorella marine, Nannochloropsis oculata, Pyramidomonas sp, Platymonas subcordiformis and Phaeodactylum tricornutum exposed to monochlorobezene (MCB), 1, 2-dichlorobenzene (1, 2-DCB), 1, 2, 3, 4-tetrachlorobenzene (1, 2, 3, 4-TeCB) and pentachlorobenzene (PeCB) was tested. Tests of 72 h-EC50 values showed that the toxicity ranged in the order: MCB<1,2-DCB<1,2,3,4-TeCB<PeCB,and that toxjcity of chlorinated benzene (CB) alone to marine algae was almost in the order: Pyramidomonas sp.< Platymonas subcordiformis<Nannochloropsis oculata < Chlorella marine< Phaeodactylum tricomutum. Study of the QSAR (Quantitative Structure-Activity Relationship) between Kow and toxicity of CBs to marine algae showed good relationships between-logEC50 and logKow.

Colorectal cancers and chlorinated water

Published reports have revealed increased risk of colorectal cancers in people exposed to chlorinated drinking water or chemical derivatives of chlorination. Oestrogen plays a dual positive functions for diminishing the possibilities of such risk by reducing the entrance, and increasing the excretion, of these chemicals. In addition, there are supplementary measures that could be employed in order to reduce this risk further, such as boiling the drinking water, revising the standard concentrations of calcium, magnesium and iron in the public drinking water and prescribing oestrogen in susceptible individuals. Hypo-methylation of genomic DNA could be used as a biological marker for screening for the potential development of colorectal cancers.

Determination of trace amounts of chlorinated insecticides and fungicides in ginseng using capillary gas chromatography and ^(63)Ni electron capture detector

A method for the simultaneous determination of a series of chlorinated insecticides and fungicides as residues in ginseng is presented in this article. Pulverized samples are subjected to Soxhlet extraction with acetone-petroleum ether and the extract is partitioned between petroleum ether and aqueous sodium sulfate solution (2:98). The combined petroleum ether phase is cleaned up by sulfuric acid and analyzed by capillary gas chromatography using 63Ni electron capture detector. Recoveries from the different concentrations for 11 kinds of chlorinated insecticides and fungicides are between 92.40 and 103.7% with coefficients of variations ranged 1.22 and 9.53% without samples, and between 89.00% and 104.10% with coefficients of variations between 1.16% and 9.16% with samples. The detection limits are 0.2- 7.0 ng/kg.

Removal of Thiophenic Sulfur Compounds from Oil Using Chlorinated Polymers and Lewis Acid Mixture via Adsorption and Friedel-Crafts Alkylation Reaction

For efficient removal of thiophenic sulfur （S-） compounds from oils, a novel method is proposed here, i.e. one-pot alkylation desulfurization （OADS）, in which oil insoluble chlorinated polymer such as polyvinyl chlo- ride （PVC） is used as the alkylating regent with Lewis acid as catalyst. The aromatic S-compounds are grafted to the polymer through Friedel-Crafts reaction and removed facilely along with the polymer. The OADS mechanism is identified by scanning electron microscope and analyzer with surface area and pore size of the polymer. The influ- ence of some factors on the OADS is studied, e.g. the type and amount of chlorinated polymers and Lewis acids. It is nroved that thionhene and benzothioDhene can be removed efficiently from oil by PVC＋AlCl3 mixture even in the presence of 25% （by mass） of benzene due to the synergetic effects of the adsorptive desulfurization of AlCl3 and the alkylation desulfurization of PVC.

Quantitative structure retention relationship studies for predicting relative retention times of chlorinated phenols on gas chromatography

A new method of quantitative structure retention relationship(QSRR) studies was reported for predicting gas chromatography(GC) relative retention times(RRTs) of chlorinated phenols (CPs) using a DB 5 column. Chemical descriptors were calculated from the molecular structure of CPs and related to their gas chromatographic RRTs by using multiple linear regression analysis. The proposed model had a multiple square correlation coefficient R 2=0.970, standard error SE =0.0472, and significant level P =0.0000. The QSRR model also reveals that the gas chromatographic relative retention times of CPs are associated with physicochemical property interactions with the stationary phase,and influenced by the number of chlorine and oxygen in the CP melecules.

Assessment of semi-empirical mass transfer correlations for pervaporation treatment of wastewater contaminated with chlorinated hydrocarbons

Assessment of mass transfer characteristics of pervaporation （PV） treatment of wastewater contaminated with chlorinated hydrocarbons is of great importance for water treatment plant operators conducting initial evaluation, process optimization, and process economics. While a membrane plays a central role in pervaporation processes and separation efficiency, the mass transfer in the liquid layer next to the membrane surface is of equal, if not greater importance. It is one of the few process parameters that can be adjusted in situ to manipulate the outcome of a pervaporation process. In this study, a bench scale pervaporation experiment of removing a common chlorinated hydrocarbon from water was carried out and the results of it were compared to the ones based on well-known semi-empirical correlations. The mass transfer coefficients from the experiments, ranging from 0.8× 10^-5-2.5× 10^-5 m/s under the operating conditions, are higher than those predicted by the correlation. The corresponding separation factors under varying flow velocities are determined to be between 310-950.

Aerobic Biodegradation of Chlorinated Hydrocarbons by Bacillus circulans WZ-12 CCTCC M 207006 under Saline Conditions

A novel saline-tolerant bacterium Bacillus circulans WZ-12 was evaluated for its potential to degrade four chlorinated hydrocarbons under saline conditions. CHECl2 was effectively degraded by Bacillus circulans WZ-12 cells in the medium containing NaCl concentrations ranging from 5 g.L^-1 to 10 g-L^-1, and the maximum degradation efficiency （85%） was achieved at NaCl concentration of 10 g.L^-1. Similarly, Bacillus circulans WZ-12 was able to degrade CH2BrCl, C2H4Cl2, and C2H2Cl2 in the presence of 10 g NaCl per liter within 24 h. Cells of Bacillus circulans WZ-12 grown in minimal salt medium contained low levels of glycine betaine （GB）, but GB levels were 3- to 5-fold higher in cells grown in media with high salt. Kinetic analysis revealed that biodegradation of the four chlorinated hydrocarbons was concentration dependent and a linear inverse correlation （R2= 0.85-0.94） was observed between the rate of biodegradation （V） and salt concentration from 5 g.L〈 to 60 g.L-1. The growing cells （in minimal salt medium） degraded approximately 50% of the CH2C12 within 24 h, whereas the resting cells （in physiological saline） degraded only 25% of the CH2C12 within 24 h and were inactive after 36 h cultivation. Biodegradation could be repeatedly performed for more than 192 h with more than 50% removal efficiency. Bacillus circulans WZ-12 grows well in an aqueous/oil system, hence, it is effective for the treatment of industriai efflu- ents that contain chlorinated hydrocarbons with high salt concentrations.

EFFECTS OF MOLECULE AGGREGATION STATE OF HINDERED PHENOL ON DYNAMIC MECHANICAL PROPERTIES OF CHLORINATED POLYETHYLENE

Hindered phenol compound 3,9-bis{1,1-dimethyl-2[β-(3-tert-butyl-4-hydroxy-5-methylphenyl)propionyloxy]ethyl}- 2,4,8,10-tetraoxaspiro[5,5]-undecane (AO-80) is a polymorphous material with different physical structures. The initial AO- 80 is highly crystalline, whereas AO-80 obtained by cooling from its molten state is an amorphous material. Annealing treatment below the melting point of AO-80 results in structural development. The mixture of chlorinated polyethylene (CPE) and vitrified AO-80 particles exhibits a dramatic change in the dynamic mechanical properties during heat treatment at 130'C. This change can be attributed to the decomposition of the vitrified AO-80 particles and the hybridization of two constituents. The vitrified AO-80 particles can crystallize again in a CPE matrix by annealing at 100'C, but this crystal is different from that of the initial AO-80 in its microstructure. In addition, the incorporation of CPE chains caused a dramatic increase in the modulus. As a result, the AO-80 crystal particles that contain some CPE chains act as multifunctional cross- links and the CPE/AO-80 hybrid was found to be a new type of elastomer.

STUDY ON MUTAGENICITY OF RAW COAGULATION-SEDIMENIED AND CHLORINATED DRINKING WATER FROM CHAO LAKE

During the period of algal growth of Chao Lake.We collectedits raw,coagulation-sedimented and chlorinated water and studiedthe mutagenicity of these water samples by using four bioassaymethods.The results showed that the organic concentrate of

MECHANICAL PROPERTIES OF CHLORINATED POLYPROPYLENE——POLYPYRROLE FILM

The chlorinated polypropylene (PPC1)-polypyrrole (PPy) conducting films were successfully synthesized by a novel method for the first time. The mechanical properties of PPC1-PPy conducting films were investigated by means of stress-strain test and DMA. It was shown that the rupture strength and initial modulus increase with the increase of polypyrrole content , but the elongation at rupture decrease. Besides, the glass transition temperature (Tg) is increasing to a plateau when polypyrrole content attains 6%. Moreover, a new mechanical model to describe the mechanical properties of PPC1-PPy blend system is established by changing the correction factor in Mooney model. It was found that the theoretic value of the model is well coincident with the experimental results.

STUDY OF MODIFIED AROMATIC POLYAMIDE SYNTHESIS AND CHARACTERISTICS OF CHLORINATED PPTA

Super pure 2,5-dichloroterephthaloyl dichloride (DDC) was prepared by chlorination andcontrolled by Gas Chromatography(GC) method. As a third monomer, DDC waspolycondensated into chlorinated PPTA together with terephthaloyldichloide (TPDC) andparaphenylene diamine (PPDA). The polycondensation conditions and the relationship betweenthe thermal behavior, viscosity, solubility, phase transition temperature of the modifiedpolyamide and the third monomer content discussed in this paper.

Research on the Preparation of Crosslinked Starch Chlorinated with Sodium Hypochlorite

Optimization of reaction variables such as catalyst type and amount, reaction temperature and time, formaldehyde amount, and oxidation extent of starch was studied for the crosslinking reaction of chlorinated cornstarch with formaldehyde. The reaction was carried out in aqueous suspension dispersed granular chlorinated cornstarch. Catalysts such as hydrochloric acid, sulfuric acid, and nitric acid were individually evaluated. The results show that the type and amount of the inorganic acid, formaldehyde amount, and oxidation extent of the chlorinated starch strongly affect the reaction efficiency. Hydrochloric acid shows the best catalyst effect on the reaction. Increasing the amount of the catalyst favourably raises the reaction efficiency. It is also demonstrated that the reaction efficiency is enhanced with the decrease of the oxidation extent of granular chlorinated starch.

THE STUDY ON CHLORINATED POLYPROPYLENE (PPCI)-POLYPYRROLE (PPy) COMPOSITE FILM

The chlorinated polypropylene-polypyrrole composite film was synthesized by means of a newmethod for the first time. The effects of various conditions on polymerization and the electric con-ductivity of PPCl-PPy composite film were investigated. It was found that PPCl-FeCl3 mixturehad an excellent film-forming ability and PPCl-PPy composite film could attain high conductivityat low content of polypyrrole and was stable for heat and atmosphere.