Circularly polarized microstrip antenna is frequently realized by cutting the slot inside the patch and feeding it along the diagonal axis. In the reported literature, procedure to design them at any given frequency i...Circularly polarized microstrip antenna is frequently realized by cutting the slot inside the patch and feeding it along the diagonal axis. In the reported literature, procedure to design them at any given frequency is not available. In proposed work, circularly polarized slot cut circular microstrip antenna at 900 MHz is discussed. By studying the surface current distributions at two orthogonal modes, formulations in their resonant length are proposed. The frequencies calculated using them closely agree with simulated results. Using proposed formulation, procedure to design circular polarized antennas at different frequencies is presented that gives circular polarized response. Thus, proposed work will be helpful to design similar circular polarized circular microstrip antenna at any desired frequency.展开更多
This paper presents the tri-band slot loaded patch antenna for mobile communication. The antenna consists of parallel slots loaded circular disk with defected ground structure antenna (DGS). The antenna without DGS, a...This paper presents the tri-band slot loaded patch antenna for mobile communication. The antenna consists of parallel slots loaded circular disk with defected ground structure antenna (DGS). The antenna without DGS, acts like wide band antenna and bandwidth is 34.45% (3.47 - 4.92 GHz) with maximum gain of 4.97 dBi, which can be used in WiMax application. This structure has the following advantages: 1) co-axial feeding technique, which is very simple as compared to other feeding technique, 2) simple and cost effective and 3) it is more efficient than the antenna without DGS. This antenna has been analyzed using IE3D simulation software.展开更多
Based on the analysis of printed elliptical slot (PES) UWB antenna,a dual-banded PES antenna is designed for WLAN and UWB bands at 2.4 GHz.The design cooperates two important wireless commutation system antennas into ...Based on the analysis of printed elliptical slot (PES) UWB antenna,a dual-banded PES antenna is designed for WLAN and UWB bands at 2.4 GHz.The design cooperates two important wireless commutation system antennas into one printed antenna.In the design,a circular slot structure is presented,which is suitable for the band ejection.Characteristics of the designed antenna are analyzed and key parameters,such as S11,S21 and VSWR are measured.E-field distribution of the surface is simulated and analyzed.展开更多
为预估和延长双圆弧谐波减速器刚轮插齿刀有效长度,论文建立了双圆弧刚轮齿廓数学模型,根据运动学法,建立了插刀加工数学仿真模型;根据齿廓法线法,建立了砂轮磨削加工数学模型,推导了刃磨后插刀的等效齿形与加工误差,确定了插刀的有效...为预估和延长双圆弧谐波减速器刚轮插齿刀有效长度,论文建立了双圆弧刚轮齿廓数学模型,根据运动学法,建立了插刀加工数学仿真模型;根据齿廓法线法,建立了砂轮磨削加工数学模型,推导了刃磨后插刀的等效齿形与加工误差,确定了插刀的有效长度。在此基础上,论文通过优化砂轮齿形与插刀齿数,延长了插刀有效长度。结果表明:优化前55齿插刀有效长度为2.1 mm, 0截面插刀加工出刚轮齿形误差为2μm;优化后0截面插刀加工出刚轮齿形误差的最大值为0.14μm。优化后插刀齿数越多,插刀有效长度越长;优化后42齿、55齿、68插刀有效长度分别增加了4.8%、52%、81%。展开更多
文摘Circularly polarized microstrip antenna is frequently realized by cutting the slot inside the patch and feeding it along the diagonal axis. In the reported literature, procedure to design them at any given frequency is not available. In proposed work, circularly polarized slot cut circular microstrip antenna at 900 MHz is discussed. By studying the surface current distributions at two orthogonal modes, formulations in their resonant length are proposed. The frequencies calculated using them closely agree with simulated results. Using proposed formulation, procedure to design circular polarized antennas at different frequencies is presented that gives circular polarized response. Thus, proposed work will be helpful to design similar circular polarized circular microstrip antenna at any desired frequency.
文摘This paper presents the tri-band slot loaded patch antenna for mobile communication. The antenna consists of parallel slots loaded circular disk with defected ground structure antenna (DGS). The antenna without DGS, acts like wide band antenna and bandwidth is 34.45% (3.47 - 4.92 GHz) with maximum gain of 4.97 dBi, which can be used in WiMax application. This structure has the following advantages: 1) co-axial feeding technique, which is very simple as compared to other feeding technique, 2) simple and cost effective and 3) it is more efficient than the antenna without DGS. This antenna has been analyzed using IE3D simulation software.
基金Sponsored by the National Basic Research Program of China(Grant No.2007CB3106XX) and Qualcomm
文摘Based on the analysis of printed elliptical slot (PES) UWB antenna,a dual-banded PES antenna is designed for WLAN and UWB bands at 2.4 GHz.The design cooperates two important wireless commutation system antennas into one printed antenna.In the design,a circular slot structure is presented,which is suitable for the band ejection.Characteristics of the designed antenna are analyzed and key parameters,such as S11,S21 and VSWR are measured.E-field distribution of the surface is simulated and analyzed.
文摘为预估和延长双圆弧谐波减速器刚轮插齿刀有效长度,论文建立了双圆弧刚轮齿廓数学模型,根据运动学法,建立了插刀加工数学仿真模型;根据齿廓法线法,建立了砂轮磨削加工数学模型,推导了刃磨后插刀的等效齿形与加工误差,确定了插刀的有效长度。在此基础上,论文通过优化砂轮齿形与插刀齿数,延长了插刀有效长度。结果表明:优化前55齿插刀有效长度为2.1 mm, 0截面插刀加工出刚轮齿形误差为2μm;优化后0截面插刀加工出刚轮齿形误差的最大值为0.14μm。优化后插刀齿数越多,插刀有效长度越长;优化后42齿、55齿、68插刀有效长度分别增加了4.8%、52%、81%。
