An analysis technique of steady state and stability for closed-loop PWM DC/DC switching converters is presented. Using this method, the closed-loop switching converter is transformed into an open-loop system. By means...An analysis technique of steady state and stability for closed-loop PWM DC/DC switching converters is presented. Using this method, the closed-loop switching converter is transformed into an open-loop system. By means of the fact that in steady state, the two boundary values are equal in one switching period. The exponential matrix is evaluated by precise time-domain-integration method, and then the related curve between feedback duty cycle and the input one is obtained. Not only can the steady-state duty cycle be found from the curve, but also the stability and stable domain of the system. Compared with other methods, it features with simplicity and less calculation, and fit for numerical simulation and analysis for closed-loop switching converters. The simulation results of examples indicate the correctness of the presented method.展开更多
In our previous work [Phys. Rev. A 85 （2012） 044102], we studied the Berry phase of the ground state and exited states in the Lipkin model. In this work, using the Hellmann-Feynman theorem, we derive the relation be...In our previous work [Phys. Rev. A 85 （2012） 044102], we studied the Berry phase of the ground state and exited states in the Lipkin model. In this work, using the Hellmann-Feynman theorem, we derive the relation between the energy gap and the Berry phase closed to the excited state quantum phase transition （ESQPT） in the Lipkin model. It is found that the energy gap is approximately linearly dependent on the Berry phase being closed to the ESQPT for large N. As a result, the critical behavior of the energy gap is similar to that of the Berry phase. In addition, we also perform a semiclassical qualitative analysis about the critical behavior of the energy gap.展开更多
The mold pressing process was applied to investigate the formability of closed-cell aluminum foam in solid–liquid–gas coexisting state.Results show that the shape formation of closed-cell aluminum foam in the solid...The mold pressing process was applied to investigate the formability of closed-cell aluminum foam in solid–liquid–gas coexisting state.Results show that the shape formation of closed-cell aluminum foam in the solid–liquid–gas coexisting state was realized through cell wall deformation and cell movement caused by primary α-Al grains that slid,rotated,deformed,and ripened within cell walls.During formation,characteristic parameters of closed-cell aluminum foam were almost unchanged.Under proper forming conditions,shaped products of closed-cell aluminum foam could be fabricated through mold pressing.展开更多
Introduction: Tuberculosis is a major health problem in developing countries including Sudan. Screening for TB cases through Household contacts (HHCs) investigation is an appropriate strategy to interrupt transmission...Introduction: Tuberculosis is a major health problem in developing countries including Sudan. Screening for TB cases through Household contacts (HHCs) investigation is an appropriate strategy to interrupt transmission of TB. Objectives: To determine the prevalence tuberculosis infection and risk factors for tuberculosis infection among household contacts in Wadimadani locality, Central State, Sudan, between November 2015 and April 2016. Methods: An analytical cross-sectional study conducted. During study period, to confirm TB diagnosis, all suspect contacts were tested through sputum samples, tuberculin skin test or chest X-ray. Structured questionnaire was used to collect socio-demographic and environmental factors. Results: One hundred forty six patients of smear-positive pulmonary tuberculosis were included in the study, 657 household contacts were identified and screened. Forty three new TB cases were detected from household contacts, yielding a prevalence of 6.5% (95% confidence interval = 0.05, 0.09) of latent tuberculosis infection (LTBI). Two factors were significantly associated with LTBI among HHCs: duration of contact with a TB patient ≤ 4 months (P = 0.03) and the educational status (P = 0.02). Conclusion: Screening of HHCs of index case of TB will contribute in early detection and treatment of new cases, and considered as a forward step towards eliminating TB.展开更多
Earthquake engineers have made a lot of efforts to derive a comprehensive set of closed form expressions for performance evaluation of frames, which are already presented in guidelines such as SAC/FEMA. These analytic...Earthquake engineers have made a lot of efforts to derive a comprehensive set of closed form expressions for performance evaluation of frames, which are already presented in guidelines such as SAC/FEMA. These analytical expressions have been developed to estimate the annual probability of exceeding a limit state. In the process of such seismic assessments, some essential assumptions are adopted to simplify the process. One of these fundamental assumptions declares that drift demand at any seismic intensity level follows a lognormal distribution around its median. To investigate the validity of this assumption, this paper describes a case study of the types of errors that could be produced by using the sample median as the central tendency. Based on the Maximum Likelihood Estimation method as well as other statistical evidence, this paper proposes the use of the sample geometric mean instead of the sample median for the central tendency. Further, the results of seismic reliability evaluations of 4 sample frames are compared based on utilizing both the geometric mean and the sample median. In this process, both first and second order power law fits of the hazard curve are implemented to compare the effects of hazard estimation and the selection of the central tendency on the final results. It is observed in the application example that the sample geometric mean could lead to more accurate results.展开更多
文摘An analysis technique of steady state and stability for closed-loop PWM DC/DC switching converters is presented. Using this method, the closed-loop switching converter is transformed into an open-loop system. By means of the fact that in steady state, the two boundary values are equal in one switching period. The exponential matrix is evaluated by precise time-domain-integration method, and then the related curve between feedback duty cycle and the input one is obtained. Not only can the steady-state duty cycle be found from the curve, but also the stability and stable domain of the system. Compared with other methods, it features with simplicity and less calculation, and fit for numerical simulation and analysis for closed-loop switching converters. The simulation results of examples indicate the correctness of the presented method.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11204012 and 91321103
文摘In our previous work [Phys. Rev. A 85 （2012） 044102], we studied the Berry phase of the ground state and exited states in the Lipkin model. In this work, using the Hellmann-Feynman theorem, we derive the relation between the energy gap and the Berry phase closed to the excited state quantum phase transition （ESQPT） in the Lipkin model. It is found that the energy gap is approximately linearly dependent on the Berry phase being closed to the ESQPT for large N. As a result, the critical behavior of the energy gap is similar to that of the Berry phase. In addition, we also perform a semiclassical qualitative analysis about the critical behavior of the energy gap.
基金financially supported by the National Natural Science Foundations of China (No.51371104)
文摘The mold pressing process was applied to investigate the formability of closed-cell aluminum foam in solid–liquid–gas coexisting state.Results show that the shape formation of closed-cell aluminum foam in the solid–liquid–gas coexisting state was realized through cell wall deformation and cell movement caused by primary α-Al grains that slid,rotated,deformed,and ripened within cell walls.During formation,characteristic parameters of closed-cell aluminum foam were almost unchanged.Under proper forming conditions,shaped products of closed-cell aluminum foam could be fabricated through mold pressing.
文摘Introduction: Tuberculosis is a major health problem in developing countries including Sudan. Screening for TB cases through Household contacts (HHCs) investigation is an appropriate strategy to interrupt transmission of TB. Objectives: To determine the prevalence tuberculosis infection and risk factors for tuberculosis infection among household contacts in Wadimadani locality, Central State, Sudan, between November 2015 and April 2016. Methods: An analytical cross-sectional study conducted. During study period, to confirm TB diagnosis, all suspect contacts were tested through sputum samples, tuberculin skin test or chest X-ray. Structured questionnaire was used to collect socio-demographic and environmental factors. Results: One hundred forty six patients of smear-positive pulmonary tuberculosis were included in the study, 657 household contacts were identified and screened. Forty three new TB cases were detected from household contacts, yielding a prevalence of 6.5% (95% confidence interval = 0.05, 0.09) of latent tuberculosis infection (LTBI). Two factors were significantly associated with LTBI among HHCs: duration of contact with a TB patient ≤ 4 months (P = 0.03) and the educational status (P = 0.02). Conclusion: Screening of HHCs of index case of TB will contribute in early detection and treatment of new cases, and considered as a forward step towards eliminating TB.
文摘Earthquake engineers have made a lot of efforts to derive a comprehensive set of closed form expressions for performance evaluation of frames, which are already presented in guidelines such as SAC/FEMA. These analytical expressions have been developed to estimate the annual probability of exceeding a limit state. In the process of such seismic assessments, some essential assumptions are adopted to simplify the process. One of these fundamental assumptions declares that drift demand at any seismic intensity level follows a lognormal distribution around its median. To investigate the validity of this assumption, this paper describes a case study of the types of errors that could be produced by using the sample median as the central tendency. Based on the Maximum Likelihood Estimation method as well as other statistical evidence, this paper proposes the use of the sample geometric mean instead of the sample median for the central tendency. Further, the results of seismic reliability evaluations of 4 sample frames are compared based on utilizing both the geometric mean and the sample median. In this process, both first and second order power law fits of the hazard curve are implemented to compare the effects of hazard estimation and the selection of the central tendency on the final results. It is observed in the application example that the sample geometric mean could lead to more accurate results.
