A NEW CLASS OF LOCALLY CONVEX SPACES AND THE GENERALIZATION OF KALTON'S CLOSED GRAPH THEOREM

By introducing the notions of L-spaces and L_r-spaces, a complete generalization of Kalton's closed graph theorem is obtained. It points out the class of L_r-spaces is the maximal class of range spaces for the closed graph theorem when the class of domain spaces is the class of Mackey spaces with weakly * sequentially complete dual.Some examples are constructed showing that the class of L_r-spaces is strictly larger than the class of separable B_r-complete spaces.Some properties of L-spaces and L_r-spaces are discussed and the relations between B-complete (resp. B_r-complete) spaces and L-spaces (resp. L_r-spaces) are given.

Is the Cape Stone Forest in Shantou City formed by wave erosion? A comparison of the pedestal rocks on the coasts and the mountains of Queshi in eastern Guangdong, China

Cape Stone Forest is a group of granite rock pillars(pedestal rocks) towering over Shilin Lake, on the southern shore of Shantou Bay in eastern Guangdong, China. The rock pillars were previously identified as sea stacks because they have marine notch-like concave sidewalls at their base, and more importantly, the lake is immediately adjacent to the bay, which is exposed to the open sea. However, rock pillars similar in shape and size can also be found at the top of Queshi Mountain, which is only about 300 meters northwest of the lake and about 85 meters above sea level. Therefore, the marine origin of Cape Stone Forest is seriously questioned. In this study, 3D imagery and drone technology were used to collect data in the investigations without direct manual measurements in the water or on the mountain. It shows that the concave sidewalls of the rock pillars in the lake and on the mountains occur at different heights and are exposed to different directions, while a natural sea stack on Mayu Island at the mouth of Shantou Bay has a horizontal notch parallel to the sea level, although the granite rock of the sea stack is the same as that of the lake and the mountains. The eastern side of the island, where the sea stack is located, is exposed to the open sea but blocks large waves for the rock pillars in the lake. Therefore, the origin of Cape Stone Forest cannot be explained by wave-based mechanisms. The only satisfactory explanation that takes into account all the field evidence is that the narrow rock pillars of the lake and mountain were formed by chemical weathering that penetrated closely the spaced joints of the granite rock, and the notch-like concave sidewalls were formed by more effective chemical weathering at the base of the pillars.

Simplified Computation of Reflective Overpressure in Closed Cuboid Space Due to Internal Explosion

A simplified method is proposed for analyzing the overpressure history of an optional point on the walls of a closed cuboid due to its internal optional point-explosion. Firstly, the overpressure histories of all nodes on the walls of a cube with a side-length of 2 m are computed under a reference-charge explosion at each node of its inner space using the LS-DYNA software, and then are collected to form a reference database. Next, with the thought of the isoparametric finite element, an interpolating algori...

EXPLORATION OF SUBSTITUTION OF REPEATED MODE SUBSPACES FOR CLOSELY SPACED MODE SUBSPACES

A new quantitative concept is introduced in this paper, which may be used to facilitate the measurement of the controllability of a subspace similar to subspace controllability degree. Then the concrete form of the subspace controllability degree of a flexible structure is derived, and the errors of subspace controllability degree and dynamical response caused by the substitution of a repeated mode subspace for a closely spaced mode subspace are discussed. All the results show that this substitution is rational under some conditions.

Recent progress of green sorbents-based technologies for low concentration CO_(2) capture

The increased concentration of CO_(2) due to continuous breathing and no discharge of human beings in the manned closed space,like spacecraft and submarines,can be a threat to health and safety.Effective removal of low concentration CO_(2) from the manned closed space is essential to meet the requirements of long-term space or deep-sea exploration,which is an international frontier and trend.Ionic liquids(ILs),as a widespread and green solvent,already showed its excellent performance on CO_(2) capture and absorption,indicating its potential application in low concentration CO_(2) capture.In this review,we first summarized the current methods and strategies for direct capture from low concentration CO_(2) in both the atmosphere and manned closed spaces.Then,the multi-scale simulation methods of CO_(2) capture by ionic liquids are described in detail,including screening ionic liquids by COSMO-RS methods,capture mechanism by density functional theory and molecular dynamics simulation,and absorption process by computational fluid dynamics simulation.Lastly,some typical IL-based green technologies for low concentration CO_(2) capture,such as functionalized ILs,co-solvent systems with ILs,and supported materials based on ILs,are introduced,and analyzed the subtle possibility in manned closed spaces.Finally,we look forward to the technology and development of low concentration CO_(2) capture,which can meet the needs of human survival in closed space and proposed that supported materials with ionic liquids have great advantages and infinite possibilities in the vital area.

QPSO-based algorithm of CSO joint infrared super-resolution and trajectory estimation

The midcourse ballistic closely spaced objects（CSO） create blur pixel-cluster on the space-based infrared focal plane,making the super-resolution of CSO quite necessary.A novel algorithm of CSO joint super-resolution and trajectory estimation is presented.The algorithm combines the focal plane CSO dynamics and radiation models,proposes a novel least square objective function from the space and time information,where CSO radiant intensity is excluded and initial dynamics（position and velocity） are chosen as the model parameters.Subsequently,the quantum-behaved particle swarm optimization（QPSO） is adopted to optimize the objective function to estimate model parameters,and then CSO focal plane trajectories and radiant intensities are computed.Meanwhile,the estimated CSO focal plane trajectories from multiple space-based infrared focal planes are associated and filtered to estimate the CSO stereo ballistic trajectories.Finally,the performance（CSO estimation precision of the focal plane coordinates,radiant intensities,and stereo ballistic trajectories,together with the computation load） of the algorithm is tested,and the results show that the algorithm is effective and feasible.

Separation of closely spaced modes by combining complex envelope displacement analysis with method of generating intrinsic mode functions through filtering algorithm based on wavelet packet decomposition

One of the important issues in the system identification and the spectrum analysis is the frequency resolution, i.e., the capability of distinguishing between two or more closely spaced frequency components. In the modal identification by the empirical mode decomposition （EMD） method, because of the separating capability of the method, it is still a challenge to consistently and reliably identify the parameters of structures of which modes are not well separated. A new method is introduced to generate the intrin- sic mode functions （IMFs） through the filtering algorithm based on the wavelet packet decomposition （GIFWPD）. In this paper, it is demonstrated that the CIFWPD method alone has a good capability of separating close modes, even under the severe condition beyond the critical frequency ratio limit which makes it impossible to separate two closely spaced harmonics by the EMD method. However, the GIFWPD-only based method is impelled to use a very fine sampling frequency with consequent prohibitive computational costs. Therefore, in order to decrease the computational load by reducing the amount of samples and improve the effectiveness of separation by increasing the frequency ratio, the present paper uses a combination of the complex envelope displacement analysis （CEDA） and the GIFWPD method. For the validation, two examples from the previous works are taken to show the results obtained by the GIFWPD-only based method and by combining the CEDA with the GIFWPD method.

Bayesian track-before-detect algorithm for nonstationary sea clutter

Radar detection of small targets in sea clutter is a particularly demanding task because of the nonstationary characteristic of sea clutter.The track-before-detect(TBD)filter is an effective way to increase the signal-to-clutter ratio(SCR),thus improving the detection performance of small targets in sea clutter.To cope with the nonstationary characteristic of sea clutter,an easily-implemented Bayesian TBD filter with adaptive detection threshold is proposed and a new parameter estimation method is devised which is integrated into the detection process.The detection threshold is set according to the parameter estimation result under the framework of information theory.For detection of closely spaced targets,those within the same range cell as the one under test are treated as contribution to sea clutter,and a successive elimination method is adopted to detect them.Simulation results prove the effectiveness of the proposed algorithm in detecting small targets in nonstationary sea clutter,especially closely spaced ones.

Multi-objective Collaborative Optimization for Scheduling Aircraft Landing on Closely Spaced Parallel Runways Based on Genetic Algorithms

A scheduling model of closely spaced parallel runways for arrival aircraft was proposed,with multi-objections of the minimum flight delay cost,the maximum airport capacity,the minimum workload of air traffic controller and the maximum fairness of airlines′scheduling.The time interval between two runways and changes of aircraft landing order were taken as the constraints.Genetic algorithm was used to solve the model,and the model constrained unit delay cost of the aircraft with multiple flight tasks to reduce its delay influence range.Each objective function value or the fitness of particle unsatisfied the constrain condition would be punished.Finally,one domestic airport hub was introduced to verify the algorithm and the model.The results showed that the genetic algorithm presented strong convergence and timeliness for solving constraint multi-objective aircraft landing problem on closely spaced parallel runways,and the optimization results were better than that of actual scheduling.

Study on water treatment effect of dispersion discharge plasma based on flowing water film electrode

To improve the utilization rate of plasma active species,in this study,a closed non-uniform air gap is formed by a flowing water film electrode and a sawtooth insulating dielectric layer to realize the diffuse glow discharge in the atmosphere.Firstly,the electric field distribution characteristics of non-uniform air gap in the sawtooth dielectric layer are studied,and the influence of aspect ratio on the characteristics of diffuse discharge plasma is discussed.Subsequently,the effects of wire mesh,the inclination angle of the dielectric plate,and liquid inlet velocity on the flow characteristics of the water film electrode are analyzed.The results show that the non-uniform electric field distribution formed in the sawtooth groove can effectively inhibit the filamentous discharge,and the 1 mm flowing water film is directly used as the electrode,and high-active plasma is formed directly on the lower surface of the water film.In addition,a plasma flowing water treatment device is built to treat the methyl orange solution and observe its decolorization effect.The experimental results show that after 50 min of treatment,the decolorization rate of the methyl orange solution reaches 96%,which provides a new idea for industrial applications of wastewater treatment.

Fruit production and quality improvement in aonla （Emblica Officinalis Gaertn.） through canopy management

In order to maintain the health and vigour and to sustain the productivity, a pruning experiment was conducted on four year old ＂Balwant＂ cultivar of aonla grown in laterite soil, planted at a spacing of 5m×5m. To find out the best pruning method, six levels of pruning was performed i.e., （1） Light judicious pruning, （2） Detopping of primary branches at 8 feet from ground level ＋ removal of all secondary branches, （3） Detopping of primary branches at 8 feet from the ground level ＋ removal of all secondary branches at 2 feet from the base of primary branches, （4） Detopping of primary branches at 8 feet from the ground level ＋ removal of all secondary branches at 1 feet from the base of primary branches, （5） Light judicious pruning ＋ Detopping of plant canopy of at 8 feet from the ground level, （6） No pruning （control）. Results of three consecutive years of investigation revealed that light judicious pruning of thin, overlapping, criss-crossed, dead, unproductive and looping branches gave highest fruit yield in all the three years and resulted 64.4 percent yield increment over control when average of three years was considered. Severe pruning of primary and secondary branches caused drastic reduction of yield for two consecutive years after pruning. Judicious pruning helped to produce better sizeable and quality fruits.

A UNIVERSAL MATRIX PERTURBATION TECHNIQUE FOR COMPLEX MODES

A universal matrix perturbation technique for complex modes is presented. This technique is applicable to all the three cases of complex eigenvalues: distinct, repeated and closely spaced eigenvalues. The lower order perturbation formulas are obtained hy performing two complex eigensubspace condensations, and the higher order perturbation formulas are derived hy a successive approximation process. Three illustrative examples are given to verify the proposed method and satisfactory results are observed.

Variable stiffness control algorithm for high-rising buildings of closely spaced frequencies based on wavelet transforms

To establish the algorithm of SAT-TMD system with the wavelet transform(WT),the modal mass participation ratio is proposed to distinguish if the high-rising structure has the characteristic of closely distributed frequencies.A time varying analytical model of high-rising structure such as TV-tower with the SAT-TMD is developed.The proposed new idea is to use WT to identify the dominant frequency of structural response in a segment time,and track its variation as a function of time to retune the SAT-TMD.The effectiveness of SAT-TMD is investigated and it is more robust to change in building stiffness and damping than that of the TMD with a fixed frequency corresponding to a fixed mode frequency of the building.It is proved that SAT-TMD is particularly effective in reducing the response even when the building stiffness is changed by ±15%;whereas the TMD loses its effectiveness under such building stiffness variations.

Selectivity of Attention as the Creation of Life-World

This article speaks of the creation of the ＂life-world＂ of human beings through focused attention. It treats attention as distinguishing, selective, arbitrary, and unintentional, associated with sense and the will. It considers the creation of spatial characteristics of attention ＂being-in-the-world,＂ where space is understood both as external and internal. Of the wide range of spatial characteristics of the ＂life-world,＂ I choose the first idea of the ＂distant＂ and ＂close＂ and analyze them in terms of positing attention.

Closed Timelike Curves in Type Ⅱ Non-Vacuum Spacetime

Here we present a cyclicly symmetric non-vacuum spacetime, admitting closed timelike curves(CTCs) which appear after a certain instant of time,i.e.,a time-machine spacetime. The spacetime is asymptotically flat, freefrom curvature singularities and a four-dimensional extension of the Misner space in curved spacetime. The spacetime is of type Ⅱ in the Petrov classification scheme and the matter field pure radiation satisfy the energy condition.

Based on point merge for paired approach sequencing on closely spaced parallel runways

The paired approach is a kind of efficiency approach to closely spaced parallel runways(CSPRs),and the point merge system has the powerful interval management function,which is effective to realize the converge of traffic flows from different approach directions.In order to improve the operation efficiency of the airport terminal area,a model of paired approach sequencing based on point merge is proposed to investigate the problem of increasing the operation capacity of the closely spaced parallel runways.Taking the minimum average flight delay time as the objective,the flight distance on sequencing legs,wake turbulence separation and paired approach safety separation as constraints,the genetic algorithm is used to optimize the paired approach sequencing of arrival flights.Taking the closely parallel runways of Shanghai Hongqiao International Airport run south as an example,the point merge program is designed and the effect of model was analyzed.The results show that after optimization,the average delay time and average landing time are reduced by 40.6%and 51.8%respectively,the capacity of the closely spaced parallel runways are 1.1 times higher than the actual,the flight uptime rate can reach 100%.It is concluded that the proposed model is feasible,which can effectively reduce delay times and alleviate congestion in terminal areas.

Effects of Sn-doping on morphology and optical properties of CdTe polycrystalline films

Sn-doped CdTe polycrystalline films were successfully deposited on ITO glass substrates by close space sublimation. The effects of Sn-doping on the microstructure, surface morphology, and optical properties of polycrys- talline films were studied using X-ray diffraction, scanning electron microscopy, and ultraviolet-visible spectrophotometry, respectively. The results show that the lower molar ratio of Sn and CdTe conduces to a strongly preferential orientation of （111） in films and a larger grain size, which indicates that the crystallinity of films can be improved by appropriate Sn-doping. As the molar ratio of Sn and CdTe increases, the preferential orientation of （111） in films becomes weaker, the grain size becomes smaller, and the crystal boundary becomes indistinct, which indicates that the crystallization growth of films is incomplete. However, as the Sn content increases, optical absorption becomes stronger in the visible region. In summary, a strongly preferential orientation of （111） in films and a larger grain size can be obtained by appropriate Sn-doping （molar ratio of Sn ： CdTe = 0.06 ： 1）, while the film retains a relatively high optical absorption in the visible region. However, Sn-doping has no obvious influence on the energy gap of CdTe films.

Numerical study on failure propagation between two closely spaced tunnels

An increasing number of engineering accidents have shown that the failure of a tunnel can propagate to a neighbouring tunnel.However,due to the complex interaction between the failed tunnel structure and the soil medium,the mechanism by which the failure is propagated between two closely spaced tunnels remains unclear.In this study,the coupled EulerianLagrangian(CEL)modelling technique was adopted to investigate the influence of a failed tunnel(FT)on an adjacent tunnel,which was termed an“influenced tunnel”(IT).The safety of the IT was analysed in detail under different circumstances,such as different failure positions of the FT,different failure degrees of the FT,and different spatial relationships between the two tunnels.The simulation results indicated that the most adverse case may occur when the two tunnels are arranged as offsets and the IT is the upper tunnel.Under this circumstance,significant shear deformation may occur in IT because IT is located at the shear band of the FT.

Efect of Thermal Annealing on the Physical Properties of Zn_(1-x)Cu_xSe Thin Films Deposited by Close Spaced Sublimation Technique

Thin films of Zn1-xCuxSe （x= 0.00, 0.05, 0.10, 0.15, 0.20） were grown on glass substrates by closed space sublimation technique. The deposited films were annealed at 200 ~C and 400 ~C in air for 1 h. The annealed samples have been investigated through Rutherford backscattering spectroscopy （RBS）, X-ray diffraction （XRD）, spectroscopic ellipsometer, spectrophotometer and Raman spectroscopy. Through RBS, the composition of the films was calculated and compared with the initial concentration. Structural characteriza- tion including crystal structure, crystal orientation, lattice parameter, grain size, strain and dislocation density were carried out using XRD data. From XRD spectra it was revealed that the as-deposited and annealed films were polycrystalline in nature with zinc-blende structure. However, the crystallinity and the grain size were improved with the increase of annealing temperature. According to Raman spectroscopy, it was observed that as deposited and annealed samples have the same characteristic vibrational modes of ZnSe at low and high frequency optical phonon modes while another mode was observed for 400 ℃ annealed samples at 745 cm-1. Spectroscopic ellipsometer has been used to found annealing effect on the optical properties of ZnSe. The band gap energy has been determined using transmission spectra. It was found that the band gap energy of the film increased with the increase of annealing temperature.

Singular Functions and Characterizations of Field Concentrations:a Survey

In the presence of closely located inclusions of the extreme material property,the physical fields,such as the electric field and the stress tensor,may be concentrated and arbitrarily large in the narrow region between two inclusions.Recently there has been significant progress on the quantitative characterization of the field concentration in the contexts of electrostatics(Laplace equation),linear elasticity(Lam´e system),and viscous flow(Stokes system).This paper is to review such progress in a coherent way.