The influence of selective cutting of mixed Korean pine(Pinus koraiensis Sieb.et Zucc.) and broad-leaf forest on rare species distribution patterns and spatial correlation in Northeast China

This study aimed to demonstrate change in spatial correlation between Korean pine （Pinus koraiensis Sieb. et Zucc.） and three rare species, and change in spatial distribution of four species in response to a range of selective cutting intensities. We sampled three plots of mixed Korean pine and broad-leaf forest in Lushuihe Forestry Bureau of Jilin province, China. Plot 1, a control, was unlogged Korean pine broad-leaf forest. In plots 2 and 3, Korean pine was selectively cut at 15 and 30 % intensity, respectively, in the 1970s. Other species were rarely cut. We used point-pattern analysis to research the spatial distributions of four tree species and quantify spatial correlations between Korean pine and the other three species, Amur linden （Tilia amurensis Rupr.）, Manchurian ash （Fraxinus mandshurica Rupr.）, and Mongolian oak （Quercus mongolica Fisch.） in all three plots. The results of the study show that selective cutting at 15 % intensity did not significantly change either the species spatial patterns or the spatial correlation between Korean pine and broadleaf species. Selective cutting at 30 % intensity slightly affected the growth of Korean pine and valuable species in forest communities, and the effect was considered nondestructive and recoverable.

Intelligent decision support system of operation-optimization in copper smelting converter

An artificial intelligence technique was applied to the optimization of flux adding systems and air blasting systems, the display of on line parameters, forecasting of mass and compositions of slag in the slagging period, optimization of cold material adding systems and air blasting systems, the display of on line parameters, and the forecasting of copper mass in the copper blow period in copper smelting converters. They were integrated to build the Intelligent Decision Support System of the Operation Optimization of Copper Smelting Converter(IDSSOOCSC), which is self learning and self adaptating. Development steps, monoblock structure and basic functions of the IDSSOOCSC were introduced. After it was applied in a copper smelting converter, every production quota was clearly improved after IDSSOOCSC had been run for 4 months. Blister copper productivity is increased by 6%, processing load of cold input is increased by 8% and average converter life span is improved from 213 to 235 furnace times.

The Popularization and Application of Cold Storage Red Blood Cells or Whole Blood at -80 ℃ of the Rh(D) Negative Patients in Surgical Operation

Summary: The efficiency of cold storage red blood cells (CSRBC) or whole blood at -80 ℃ used in 27 Rh(D) negative patients during surgical operation was reported. The Rh(D) negative patients received the transfusion of CSRBC or whole blood stored at -80 ℃ for 180 to 360 days. The changes in the indexes, such as blood TB, DB, K +, Na +, BUN, Cr, urine protein (URPO), UOB, Hb, HCT, serum total protein, relative to hemolytic reaction and blood volume before and after transfusion were observed. The results showed that after transfusion of CSRBC or whole blood 27 cases were negative for urine protein and UOB, and the levels of BUN and Cr were normal (P>0.05). Blood TB, DB, Hb, and HCT were increased, while pH, blood K + and blood Na + was normal with the difference being not significant before and after operation (P>0.05). Plasma protein was decreased, but there was no significant difference before and after operation (P>0.05). It was suggested that CSRBC or whole blood at -80 ℃ could be safely infused to the Rh(D) negative patients without side effects during the surgical operation.

Practice parameters for the use of actigraphy in the military operational context: the Walter Reed Army Institute of Research Operational Research Kit-Actigraphy(WORK-A)

Background: The Walter Reed Army Institute of Research(WRAIR) Operational Research Kit-Actigraphy(WORK-A) is a set of unique practice parameters and actigraphy-derived measures for the analysis of operational military sleep patterns. The WORK-A draws on best practices from the literature and comprises 15 additional descriptive variables. Here, we demonstrate the WORK-A with a sample of United States Army Reserve Officers’ Training Corps(ROTC) cadets(n=286) during a month-long capstone pre-commissioning training exercise.Methods: The sleep of ROTC cadets(n=286) was measured by Philips Actiwatch devices during the 31-day training exercise. The preliminary effectiveness of the WORK-A was tested by comparing differences in sleep measures collected by Actiwatches as calculated by Philips Actiware software against WORK-A-determined sleep measures and self-report sleep collected from a subset of ROTC cadets(n=140).Results: Actiware sleep summary statistics were significantly different from WORK-A measures and self-report sleep(P≤0.001). Bedtimes and waketimes as determined by WORK-A major sleep intervals showed the best agreement with self-report bedtime(22:21±1:30 vs. 22:13±0:40, P=0.21) and waketime(04:30±2:17 vs. 04:31±0:47, P=0.68). Though still significantly different, the discrepancy was smaller between the WORK-A measure of time in bed(TIB) for major sleep intervals(352±29) min and self-report nightly sleep duration [(337±57) min, P=0.006] than that between the WORK-A major TIB and Actiware TIB [(177±42) min, P≤0.001].Conclusions: Default actigraphy methods are not the most accurate methods for characterizing soldier sleep, but reliable methods for characterizing operational sleep patterns is a necessary first step in developing strategies to improve soldier readiness. The WORK-A addresses this knowledge gap by providing practice parameters and a robust variety of measures with which to profile sleep behavior in service members.

Multi-Criteria Decision Making Based on Bipolar Picture Fuzzy Operators and New Distance Measures

This paper aims to introduce the novel concept of the bipolar picture fuzzy set(BPFS)as a hybrid structure of bipolar fuzzy set(BFS)and picture fuzzy set(PFS).BPFS is a new kind of fuzzy sets to deal with bipolarity(both positive and negative aspects)to each membership degree(belonging-ness),neutral membership(not decided),and non-membership degree(refusal).In this article,some basic properties of bipolar picture fuzzy sets(BPFSs)and their fundamental operations are introduced.The score function,accuracy function and certainty function are suggested to discuss the comparability of bipolar picture fuzzy numbers(BPFNs).Additionally,the concept of new distance measures of BPFSs is presented to discuss geometrical properties of BPFSs.In the context of BPFSs,certain aggregation operators(AOs)named as“bipolar picture fuzzy weighted geometric(BPFWG)operator,bipolar picture fuzzy ordered weighted geometric(BPFOWG)operator and bipolar picture fuzzy hybrid geometric(BPFHG)operator”are defined for information aggregation of BPFNs.Based on the proposed AOs,a new multicriteria decision-making(MCDM)approach is proposed to address uncertain real-life situations.Finally,a practical application of proposed methodology is also illustrated to discuss its feasibility and applicability.

Area-Efficient Low Power CMOS Image Sensor Readout Circuit with Fixed Pattern Noise Cancellation

A low cost of die area and power consumption CMOS image sensor readout circuit with fixed pattern noise(FPN) cancellation is proposed.By using only one coupling capacitor and switch in the double FPN cancelling correlative double sampling(CDS),pixel FPN is cancelled and column FPN is stored and eliminated by the sampleand-hold operation of digitally programmable gain amplifier(DPGA).The bandwidth balance technology based on operational amplifier(op-amp) sharing is also introduced to decrease the power dissi...

Visual Study on Flow and Operational Characteristics of Flat Plate Closed Loop Pulsating Heat Pipes

This paper presents an experimental study including visualization on a flat plate closed loop pulsating heat pipes.It consists of a total of 40 channels with square cross section(2 mm×2 mm,165 mm long) machined directly on an aluminum plate(180 mm×120 mm×3 mm) covered by a transparent plate.The working fluid employed is ethanol.As a result,various flow patterns and their transitions are observed and found to be related to the fluid fill ratio,input heat load and the device orientation.Also the operational characteristics and working mechanism are discussed.

Expression Pattern and Target Gene of bbu-miR-103-1 in Buffalo(Bubalus bubalis) at Lactation and Non-lactation Periods

[ Objectivel The paper aimed to investigate the expression pattern of bbu-miR-103-1 in buffalo （Bubalus bubalis） at lactation and non-lactation periods, and to predict its target gene and function. [ Method] Expression pattern of bbu-miR-103-1 at lactation and non-lactation periods were detected by qRT-PCR. The precursor expression plasmid of bbu-miR-103-1 was constructed and named LpEZX-pre-miR-103-1. It was packaged and propagated to produce high-titer lenti- virus in 293T cell lines, which could be used to infect buffalo mammary epithelial cells （BMECs） and over express bbu-miR-103-1. The inhibitor of bbu-miR- 103-1 was chemically synthesized and transfected into BMECs to suppress bbu-miR-103-1 at the same time. The relative expression of pantothenate kinase 3 （ PANK3 ） and milk fat metabolism related genes were detected by qRT-PCR. [ Result] The relative expression of bbu-miR-103-1 at lactation period was 5.29 times higher than that at non-lactation period in buffalo （ P 〈 0.01 ）. The LpEZX-pre-miR-103-1 had been successfully constructed and packaged with the infection titer of 3.47×10^6 PFU/mL. Overexpress or suppress of bbu-miR-103-1 extremely down-regulated or up-regulated the expression level of PANK3 in BMECs （ P 〈 0.01 ）. Over expression of bbu-miR-103~l extremely enhanced the expression of Acetyl-CoA carboxylase alpha（ACACA）, Glycerol-3-phosphate acyhransferase 1 mitochon- drial （GPAM）, Diacylglycerol Oacyhransferase l （DGAT1） and Pyrnvate dehydrogenase lipoamide kinase isozyme 4 （PDK4） （P 〈0.01 ）, and also significantly up-regulated the expression of sterol regulatory element binding protein-1 c （SREBPI c）, Adipose differentiation-related protein （ADFP）, Cluster of differentiation 36 （ CD36）, Acetyl-CoA synthetase short-chain subfamily member 1 （ACSS1） （P 〈0.05）. Over expression of bbu-miR-103-1 down-regulated the expression of PANK3, and improved the mRNA level of SREBPlc by feedback regulation, finally promoting the de novo synthesis of fatty acid beginning with ACACA. [ Conclusion] bbu-miR-103-1 plays an important role in enhancing milk fatty acid synthesis, which provides a molecular base for revealing formation and regulatory mechanism of high-level milk fat in buffalo.

OPTIMIZATION ON ANTENNA PATTERN OF SPACEBORNE SAR WITH IMPROVED NSGA-Ⅱ

Optimization of antenna array pattern used in a spaceborne Synthetic Aperture Radar (SAR) system is considered in this study. A robust evolutionary algorithm, Non-dominated Sorting Genetic Algorithms (the improved NSGA-Ⅱ), is applied on a spaceborne SAR antenna pattern design. The system consists of two objective functions with two constraints. Pareto fronts are generated as a result of multi-objective optimization. After being validated by a test problem ZDT4, the algorithms are used to synthesize spaceborne SAR antenna radiation pattern. The good results with low Ambi- guity-to-Signal Ratio (ASR) and high directivity are obtained in the paper.

SONOGRAPHIC PATTERNS AND DIFFERENTIAL DIAGNOSIS OF CYSTIC RENAL CARCINOMAS

OBJECTIVE: To study the sonographic features and patterns of cystic renal carcinomas. METHODS: Thirteen cases of cystic renal carcinoma confirmed by operation and pathology were examined by ultrasonography, and the cystic walls, septa and solid mural nodules were studied. RESULTS: Solid mural nodules of some cases and irregular thickening of the cystic walls and septa were characteristic findings for the ultrasonic diagnosis of cystic renal carcinomas. According to their pathologic mechanisms and sonographic features, cystic renal carcinomas were classified into 3 patterns: unilocular cystic mass, multiloculated cystic mass and cystic-solid mass. CONCLUSIONS: Typical cystic renal carcinomas can be well diagnosed, while atypical cases may be misdiagnosed as benign renal cysts by ultrasonography. Color Doppler ultrasonography and needle aspiration guided by ultrasonography are helpful in the diagnosis of these atypical cases.

Computer-aided Pattern Design of Multi-bar Warp Knitted Fabrics

To meet the development trend of multi-bar warp knit-ting machine towards high-speed,advanced technologyand computer control and the requirements of variousproducts with small quantity,there are many researcheson the computer-aided pattern design of multi-barwarp knitted fabrics.In terms of the special propertiesof the computer-aided pattern design of multi-barwarp knitted fabrics,the Object Oriented Program(OOP)programming-Object Windows class Library(OWL)programming is selected.According to thecharacters of the OWL programming,various functionsare defined.Pattern design and technical parameters canbe output,which offers a great convenience for the fac-tory.

Study On Pattern Design of Men's Tailored-suit Sleeve

Sleeve pattern design of men’ s tailored - suit is one of the most difficult problems of clothing pattern design. Based on the experimental studies of armhole girth, the difference of armhole width and crown height, crown angle, under sleeve curve’s diagonal line length, crown ease and its distribution rule, this paper mainly deals with the sleeve pattern design of tailored - suit for Chinese men. The influences of these factors are discussed and furthermore, some qualitative, quantifiable conclusions are drawn to design perfect pattern of men’ s tailored - suit sleeve.

Research on the Database Technology under the Operation of the IOT Huge Amounts of Data

In this paper, we conduct research on the database technology under the basic operation of the IOT huge amounts of data. Spatial data service is the process of basic customer application system service request, directory service system according to the request is mapped into physical addresses, according to the data block physical disk server address block of data read from the disk in parallel and sent to the client the process of application system. In addition, spatial data distribution system should possess unloading, transfer, replication, and optimization of spatial data, and other functions, to achieve comprehensive management and maintenance of spatial data. Under this basis, we propose the enhanced database technology that optimizes the operation with better performance.

<i>H</i>(.,.)<i>- φ - η -</i>Accretive Operators and Generalized Variational-Like Inclusions

In this paper, we generalize H(.,.) accretive operator introduced by Zou and Huang [1] and we call it H(.,.)- φ - η - accretive operator. We define the resolvent operator associated with H(.,.)- φ - η - accretive operator and prove its Lipschitz continuity. By using these concepts an iterative algorithm is suggested to solve a generalized variational-like inclusion problem. Some examples are given to justify the definition of H(.,.)- φ - η - accretive operator.

Crack patterns corresponding to the residual strength plateau of ceramics subjected to thermal shock

The formation strength plateau of ceramics is addressed. A set of of 99A1203 are conducted, mechanism of the residual subjected to thermal shock thermal shock experiments where the thin specimens of 1 mm× 10 mm×50 mm exhibit parallel through edge cracks, and thus permit quantitative measurements of the crack patterns. The cracks evolve with the severity of ther- mal shock. It is found that there is a correlation between the length and density of the thermal shock cracks. The increase of crack length weakens the residual strength, whereas the increase of crack density improves it. In a considerably wide temperature range, the two contrary effects just counteract each other; consequently a plateau appears in the variation curve of the residual strength. A comparison between the numerical and experimental results of the residual strength is made, and they are found in good agreement. This work is helpful to a deep understanding of the thermal shock failure of ceramics.

Semi-Commutative Differential Operators Associated with the Dirac Opetator and Darboux Transformation

In the present paper, the semi-commutative differential oparators associated with the 1-dimensional Dirac operator are constructed. Using this results, the hierarchy of the mKdV (-) polynomials are expressed in terms of the KdV polynomials. These formulas give a new interpretation of the classical Darboux transformation and the Miura transformation. Moreover, the recursion operator associated with the hierarchy of the mKdV (-) polynomials is constructed by the algebraic method.

Loosely coordinating diluted highly concentrated electrolyte toward -60℃ Li metal batteries

Lithium metal batteries(LMBs) promise energy density over 400 Wh kg^(-1).However,they suffer severe electrochemical performance deterioration at sub-zero temperatures.Such failure behavior highly correlates to inferior lithium metal anode(LMA) compatibility and sluggish Li^(+) desolvation.Here,we demonstrate that cyclopentylmethyl ether(CPME) based diluted high-concentration electrolyte(DHCE)enables-60℃ LMBs operation.By leveraging the loose coordination between Li^(+) and CPME,such developed electrolyte boosts the formation of ion clusters to derive anion-dominant interfacial chemistry for enhancing LMA compatibility and greatly accelerates Li^(+) desolvation kinetics.The resulting electrolyte demonstrates high Coulombic efficiencies(CE),providing over 99.5%,99.1%,98.5% and 95% at 25,-20,-40,and-60℃respectively.The assembled Li-S battery exhibits remarkable cyclic stability in-20,and-40℃ at 0.2 C charging and 0.5 C discharging.Even at-60℃,Li-S cell with this designed electrolyte retains> 70% of the initial capacity over 170 cycles.Besides,lithium metal coin cell and pouch cell with10 mg cm^(-2) high S cathode loading exhibit cycling stability at-20℃.This work offers an opportunity for rational designing electrolytes toward low temperature LMBs.

Antibiotic Prescribing Patterns and Prevalence of Surgical Site Infections in Caesarean Section Deliveries at Two Tertiary Hospitals in Lusaka, Zambia

Introduction: A caesarean section (CS) is one of the most frequently performed obstetric surgeries in the world and its use has increased dramatically in recent years. The number of caesarean section cases worldwide has been increasing each year, and the World Health Organization (WHO) reported an excess of 10% - 15% of CS procedures for all births. However, some women experience surgical site infections (SSIs) after undergoing CS delivery. This study investigated the prescribing patterns of antibiotics in CS deliveries and the prevalence of SSIs at two tertiary hospitals in Lusaka, Zambia. Materials and Methods: A retrospective cross-sectional study was conducted from January 2020 to December 2020 at the Women and Newborn University Teaching Hospital (UTH) and the Levy Mwanawasa University Teaching Hospital, in Lusaka, Zambia. Results: Of a total of 838 women who delivered via CS, more than half were aged between 21 and 25 years (n = 461, 55.0%), 56.3% were from low-cost residential areas, and 57% had emergency CS delivery. The prevalence of SSIs was 6.0%, with the level of education (OR 0.377, 95% CI 0.150 - 0.946), type of caesarean section (OR 6.253, 95% CI 2.833 - 13.803), and oral antibiotics post-caesarean (OR 0.218, 95% CI 0.049 - 0.963). The duration of IV antibiotic treatment significantly predicted SSI (p Conclusion: This study found that the third-generation cephalosporin (cefotaxime) and triple combination therapy (benzylpenicillin, gentamicin, and metronidazole) were the most frequently prescribed antibiotics before and after CS. The level of education, type of CS, oral antibiotics post-CS, facility, and duration of administering IV antibiotics were all predictors of SSIs.

The combined detection of carcinoembryonic antigen,carcinogenic antigen 125,and carcinogenic antigen 19-9 in colorectal cancer patients

BACKGROUND Hepatic metastases are common and difficult to treat after colorectal cancer(CRC)surgery.The predictive value of carcinoembryonic antigen(CEA),cancer antigen(CA)125 and CA19-9 combined tests for liver metastasis is unclear.AIM To evaluate predictive value of combined tests for CEA,CA125,and CA19-9 levels in patients with liver metastases of CRC.METHODS The retrospective study included patients with CRC alone(50 cases)and patients with CRC combined with liver metastases(50 cases)who were hospitalized between January 2021 and January 2023.Serum CEA,CA125 and CA19-9 levels were compared between the two groups,and binary logistic regression was used to analyze the predictive value of the combination of these tumor markers in liver metastasis.In addition,we performed receiver operating characteristic(ROC)curve analysis to assess its diagnostic accuracy.RESULTS The results showed that the serum CEA,CA125 and CA19-9 levels in the CRC with liver metastasis group were significantly higher than those in the CRC alone group.Specifically,the average serum CEA level in the CRC with liver metastasis group was 162.03±810.01 ng/mL,while that in the CRC alone group was 5.71±9.76 ng/mL;the average serum CA125 levels were 43.47±83.52 U/mL respectively.and 13.5±19.68 U/mL;the average serum CA19-9 levels were 184.46±473.13 U/mL and 26.55±43.96 U/mL respectively.In addition,binary logistic regression analysis showed that CA125 was significant in predicting CRC liver metastasis(P<0.05).ROC curve analysis results showed that the areas under the ROC curves of CEA,CA125 and CA19-9 were 0.607,0.692 and 0.586.CONCLUSION These results suggest that combined detection of these tumor markers may help early detection and intervention of CRC liver metastasis,thereby improving patient prognosis.

基于ST-CSLBP的混合时空背景建模算法

针对背景建模方法对场景光照变化较为敏感,提出融合时间预测和空域纹理信息设计全新的时空-对称ST-CSLBP算子,构建基于ST-CSLBP直方图的混合时空背景模型,融合时域分布统计法和空域背景各自的优势,以同时适应长时光照以及短时的光照变化。实验表明,该算法与现有背景建模算法相比,具有较好的准确率和检索率。