Co-liquefaction of Coal and Used Tire in Supercritical Water

The co-liquefaction of lignite coal and used tire was performed in a 250-ml batch reactor, in supercritical water under a nitrogen atmosphere to investigate the effects of temperature (380-440℃), water/feedstock ratio (4/1-10/1 (wt./wt.)) and the % used tire content in the feedstock (0-100 wt.%) on the conversion efficiency, liquid yield and oil composition attained. The maximum conversion and oil yield were 67 and 50%, respectively, obtained at 400℃ at 1 min, with water/feedstock ratio of 10/1 and 80% used tire content. The distillation characteristics of the oil products, analyzed by simulated distillation gas chromatography, revealed that the oil composition depended significantly on the reaction temperature. The co-liquefaction of coal and used tire yielded a synergistically increased level of oil production. Moreover, the total conversion level obtained with co-liquefaction alone was almost equal to those obtained in the presence of either Fe2O3 or NiMo as catalysts, under the same conditions. Therefore, supercritical water is a good medium for the dissolution of the volatile matter from a coal and used tire matrix.

Co-liquefaction of Cotton Seed and Flos Populi in Sub-critical Water/Ethanol Solvent for Bio-oil with Medical Stone Based Additives

The co-liquefaction behaviors of cotton seed(CS)and flos populi(FP)were investigated in the sub-critical water/ethanol mixed solvent using the medical stone(MS)based additives.Oil products were characterized using FTIR,GC-MS,1HNMR,and 13CNMR techniques.The test results showed that the synergistic effect of co-liquefaction was obvious when the ratio of cotton seed and flospopuli was 1:1 without additives.The additives,such as 12-phosphotungstic acid(PW12),HZSM-5,PW12/HZSM-5 and modified medical stone(MS),PW12/MS,Ni/MS,Co/MS,Mo/MS and Co-Mo/MS,could increase the bio-oil yield;and the modified MS resulted in higher liquefied oil yield than that achieved by MS.Furthermore,additives such as Ni/MS,Mo/MS,and Co-Mo/MS also could increase the yield of aliphatic hydrocarbons in liquefied oil.The addition of Co-Mo/MS could lead to a highest liquefied oil yield of 28.8%,while the additive of PW12/HZSM-5 could result in a highest total conversion of 81.6%.Results also revealed that additives,such as PW12/MS,PW12,PW12/HZSM-5,Ni/MS,Co/MS,Mo/MS,and Co-Mo/MS,could increase the H2 production and decrease the CO2 production in gas products.