What's Your Daily Routine?

Every day,people follow a routine.What is your morning routine?Maybe you wake up at six or seven.You wash your face and brush your hair.You dress for school or work.Maybe you eat breakfast at home.

Routine invasive strategy and frailty burden in non-ST-segment elevation acute myocardial infarction

Objective To assess the prognostic impact of a routine invasive strategy according to the frailty burden in patients with non-ST-segment elevation myocardial infarction(NSTEMI)from the MOSCA-FRAIL clinical trial.Methods The MOSCA-FRAIL trial randomized 167 frail patients,defined by a Clinical Frailty Scale(CFS)≥4,with NSTEMI to an invasive or conservative strategy.The primary endpoint was the number of days alive and out of hospital(DAOH)one year after discharge.For this subanalysis,we compared the impact of an invasive strategy on the outcomes between vulnerable(CFS=4,n=43)and frail(CFS>4,n=124)patients.Results Compared to vulnerable patients,frail patients presented lower values of DAOH(289.8 vs.320.6,P=0.146),more read-missions(1.03 vs.0.58,P=0.046)and higher number of days spent at the hospital during the first year(10.8 vs.3.8,P=0.014).The cau-ses of readmission were mostly non-cardiac(56%).Among vulnerable patients,DAOH were similar regardless of strategy(invasive vs.conservative:325.7 vs.314.7,P=0.684).Among frailest patients,the invasive group tended to have less DAOH(267.7 vs.311.1,P=0.117).Indeed,patients with CFS>4,invasively managed lived 29 days less than their conservative counterparts.In contrast,the-re were no differences in the subgroup with CFS=4.Conclusions Adult patients with frailty and NSTEMI showed different prognosis according to the degree of frailty.A routine in-vasive strategy does not improve outcomes and might be harmful to the frailest patients.

Analysis of Blood Lipids, Blood Glucose, Blood Uric Acid, and Blood Routine Test Results in Retired Employees of a Unit in the Civil Aviation System

Objective:To investigate and analyze the annual physical examination results of retired employees from a unit in the civil aviation system,focusing on blood lipids,blood glucose,blood uric acid,and blood routine results.The study aims to provide relevant references for formulating reasonable disease management measures for preventing and controlling hyperlipidemia,hyperuricemia,and other conditions in retired employees.Methods:The examination results of 231 participants were collected and analyzed.The participants were divided into four groups based on age:middle-aged group,young-old group,middle-old group,and old-old group.The blood test results were compared across these groups,and an assessment of atherosclerotic cardiovascular disease(ASCVD)risk levels was completed in conjunction with medical history.Blood test results were also compared by gender.Results:There were no significant statistical differences in blood test results when grouped by age.However,the prevalence of hyperuricemia was higher in males than in females,while the prevalence of hypercholesterolemia was higher in females than in males.The LDL-C target achievement rate was lower in the moderate-and-high-risk group as well as the very high-risk group as defined by ASCVD risk levels.Conclusion:Management of hyperuricemia and hyperlipidemia in retired employees(elderly patients)should be strengthened to reduce the risk of ASCVD events and alleviate the potential medical burden associated with disease progression.

Effects of synthesis conditions on layered Li[Ni_(1/3)Co_(1/3)Mn_(1/3)]O_2 positive-electrode via hydroxide co-precipitation method for lithium-ion batteries

Layered Li[Ni1/3Co1/3Mn1/3]O2 was synthesized with complex metal hydroxide precursors that were prepared by a co-precipitation method.The influence of coordination between ammonia and transition-metal cations on the structural and electrochemical properties of the Li[Ni1/3Co1/3Mn1/3]O2 materials was studied.It is found that when the molar ratio of ammonia to total transition-metal cations is 2.7：1,uniform particle size distribution of the complex metal hydroxide is observed via scanning electron microscopy.The average particle size of Li[Ni1/3Co1/3Mn1/3]O2 materials was measured to be about 500 nm,and the tap-density was measured to be approximately 2.37 g/cm3,which is comparable with that of commercialized LiCoO2.XRD analysis indicates that the presently synthesized Li[Ni1/3Co1/3Mn1/3]O2 has a hexagonal layered-structure.The initial discharge capacity of the Li[Ni1/3Co1/3Mn1/3]O2 positive-electrode material is determined to be 181.5 mA·h/g using a Li/Li[Ni1/3Co1/3Mn1/3]O2 cell operated at 0.1C in the voltage range of 2.8-4.5 V.The discharge capacity at the 50th cycle at 0.5C is 170.6 mA·h/g.

Recovery of iron from waste ferrous sulphate by co-precipitation and magnetic separation

Magnetite concentrate was recovered from ferrous sulphate by co-precipitation and magnetic separation. In co-precipitation process, the effects of reaction conditions on iron recovery were studied, and the optimal reaction parameters are proposed as follows： n（CaO）/n（Fe2＋） 1.4：1, reaction temperature 80 ℃, ferrous ion concentration 0.4 mol/L, and the final mole ratio of Fe3＋ to FJ＋ in the reaction solution 1.9-2.1. In magnetic separation process, the effects of milling time and magnetic induction intensity on iron recovery were investigated. Wet milling played an important part in breaking the encapsulated magnetic phases. The results showed that the mixed product was wet-milled for 20 min before magnetic separation, the grade and recovery rate of iron in magnetite concentrate were increased from 51.41% and 84.15% to 62.05% and 85.35%, respectively.

Preparation of MnxNi0.5-xZn0.5Fe2O4 Nanorods by the Co-precipitation Method

MnxNi0.5-xZn0.5Fe2O4 nanorods were successfully synthesized by the thermal treatment of rod-like precursors that were fabricated by the co-precipitation of Mn2＋, Ni2＋, and Fe2＋ in the lye. The phase, morphology, and particle diameter were examined by the X-ray diffraction and transmission electron microscopy. The magnetic properties of the samples were studied using a vibrating sample magnetometer. nanorods with a diameter of 35 nm and an The results indicated that pure Ni0.5-xZn0.5Fe2O4 aspect ratio of 15 were prepared. It was found that the diametei of the MnxNi0.5-xZn0.5Fe2O4（0≤x≤0.5） samples increased, the length and the aspect .ratio decreased, with an increase in x value. When x=0.5, the diameter and the aspect ratio of the sample reached up to 50 nm and 7-8, respectively. The coercivity of the samples first increased and then decreased with the increase in the x value. The coercivity of the samples again increased when the x value was higher than 0.4. When x=0.5, the coercivity of the MnxNi0.5-xZn0.5Fe2O4 sample reached the maximal value （134.3 Oe） at the calcination temperature of 600 ℃. The saturation magnetization of the samples first increased and then. decreased with the increase in the x value. When x=0.2, the saturation magnetizat：ion of the sample reached the maximal value （68.5 emu/g） at the calcination temperature of 800 ℃.

Fluorescence and preparation of Sr_2(P_2O_7 ):Ce,Tb phosphate by co-precipitation method

The micron-sized Sr2（P2OT）：Ce,Tb green phosphors were prepared by being annealed at different temperatures with its precursors synthesized by co-pre-cipitates of （NH4）2HPO4 at ambient temperature. The phase structure, grain size, surface morphology, and luminescent properties of phosphors were investigated by X-ray diffraction, scanning electron microscope, trans-mission electron microscope, and fluorescence spectrum. The results show that the product of precursor annealed at 1,100 ℃ is Sr2（P2O7）：Ce,Tb, which belongs to ortho-rhombic phase. The powder is spherical and the size dis-tribution is in micron grade. The sample with the molar ratio of Sr/Tb/Ce of 100.0：0.4：0.6 shows the best fluores-cence effect annealed at 1,100 ℃ for 3 h. The phosphors produce green fluorescence by being excitated with ultra-violet radiation of 254 nm wavelength, and the main emission peak is at 547 nm. The Sr2（P2O7）：Ce,Tb phos-phors synthesized by co-precipitation method of precursors at ambient temperature is a kind of efficient green-emitting phosphors.

Considerations for routine coagulation monitoring with rivaroxaban:A case report and review of the literature

BACKGROUND Rivaroxaban is a non-vitamin K antagonist oral anticoagulant that does not require coagulation monitoring based on current recommendations. Our goal is to explore whether routine coagulation monitoring should not be required for all patients receiving oral rivaroxaban, what relationship between routine coagulation abnormalities and bleeding, and how to deal with the above clinical situations through our case and review of the literature.CASE SUMMARY We report a 67-year-old woman with a history of atrial fibrillation who presented to the hospital with worsening dyspnea and cough. Based on electrocardiogram,venous compression ultrasonography, and computed tomography pulmonary angiography, the diagnosis of atrial fibrillation, deep venous thrombosis, and acute pulmonary embolism was confirmed. Her coagulation assays and renal function were normal on admission; she was not underweight, did not have a history of hemorrhagic disease, and her CHA2 DS2-VAS, HAS-BLED, and simplified Pulmonary Embolism Severity Index scores were 3, 0, and 0,respectively. Oral rivaroxaban(15 mg twice daily) was administered. The following day, she presented gastrointestinal and gum bleeding, combined with coagulation abnormalities. Following cessation of rivaroxaban, her bleeding stopped and tests improved over the next 2 d. Rivaroxaban was begun again 3 d after recovery. However, she again presented with gastrointestinal and gum bleeding and the abnormal tests, and the therapy was discontinued. At 30-d follow-up after discharge, she presented normal coagulation tests without bleeding.CONCLUSION Although current guidelines recommend that using non-vitamin K antagonist oral anticoagulants including rivaroxaban do not require coagulation monitoring,a small number of patients may develop routine coagulation test changes and bleeding during rivaroxaban therapy, especially in the elderly. Clinicians should pay attention to these patients and further obtain evidence in practice.

Electrochemical performance of Ti^(4+)-doped LiFePO_4 synthesized by co-precipitation and post-sintering method

Ti4+-mixed FePO4·xH2O precursor was prepared by co-precipitation method,with which Ti4+ cations were added in the process of preparing FePO4·xH2O to pursue an effective and homogenous doping way.Ti4+-doped LiFePO4 was prepared by an ambient-reduction and post-sintering method using the as-prepared precursor,Li2CO3 and oxalic acid as raw materials.The samples were characterized by scanning electron microscopy (SEM),X-ray diffractometry (XRD),electrochemical impedance spectroscopy (EIS),and electrochemical charge/discharge test.Effects of Ti4+-doping and sintering temperature on the physical and electrochemical performance of LiFePO4 powders were investigated.It is noted that Ti4+-doping can improve the electrochemical performance of LiFePO4 remarkably.The Ti4+-doped sample sintered at 600 ℃ delivers an initial discharge capacity of 150,130 and 125 mA·h/g with 0.1C,1C and 2C rates,respectively,without fading after 40 cycles.

Oxidative coupling of methane over LaAlO3 perovskite catalysts prepared by a co-precipitation method: Effect of co-precipitation pH value

Oxidative coupling of methane(OCM) was conducted over LaAlO3X catalysts that were prepared by a coprecipitation method using different co-precipitation pH values(X = 6–10). The aim is to investigate the effect of p H values on the catalytic activity of La AlO3 catalysts in this reaction. The results showed that the co-precipitation pH value affected greatly on the formation of chemical species of precipitate precursors in the co-precipitation step, leading to different phases of the finally obtained LaAlO3 catalysts.When the co-precipitation pH value increased up to 8, the lanthanum-related phases such as La2 O3 and La(OH)3 were gradually formed as by-products, preventing the formation of LaAlO3 perovskite crystalline structure and facilitating the formation of oxygen vacancies on catalyst surface. However, at pH value of9 or higher, the lanthanum content in the precipitate precursor was increased greatly. Not LaAlO3 perovskite but lanthanum-related phases were developed as main phases, reducing their catalytic activities in this reaction. Among LaAlO3 catalysts, the one prepared at pH = 8 showed the highest C2 yield due to its well-developed oxygen vacancies and electrophilic lattice oxygen. Therefore, the co-precipitation pH value strongly affected the LaAlO3 catalyst activity in OCM reaction. A precious pH control should be required to prepare various perovskite catalysts for the OCM.

Solution-Phase Synthesis and Characterization of Perovskite LaCoO_3 Nanocrystals via A Co-Precipitation Route

A facile co-precipitation route for the synthesis of well-dispersed LaCoO3 nanocrystals was developed. The asprepared products were characterized by X-ray diffraction （XRD）, transmission electron microscopy （TEM）, energy dispersive X-ray spectrometer （EDX）, and laser Raman spectroscopy （LRS）. The resuks showed that modulating the growth parameters, such as the addition of surfactants as well as the adding manner of the precipitator had a significant effect on the overall shape and size of the obtained nanocrystals. The nanorods with the diameter of 20 nm and spherical LaCoO3 nanocrystals with the size of about 25 nm could be obtained at a relatively low calcining temperature of 600℃. Furthermore, the Raman properties of LaCoO3 products obtained at different calcining temperatures were investigated.

Effects of synthesis conditions on the structural and electrochemical properties of layered LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2 cathode material via oxalate co-precipitation method

The uniform layered LiNi1/3Co1/3Mn1/3O2 cathode material for lithium ion batteries was prepared by using （Ni1/3Co1/3Mn1/3）C2O4 as precursor synthesized via oxalate co-precipitation method in air. The effects of calcination temperature and time on the structure and electrochemical properties of the LiNi1/3Co1/3Mn1/3O2 were systemically studied. XRD results revealed that the optimal calcination conditions to prepare the layered LiNi1/3Co1/3Mn1/302 were 950℃ for 15 h. Electrochemical measurement showed that the sample prepared under the such conditions has the highest initial discharge capacity of 160.8 mAh/g and the smallest irreversible capacity loss of 13.5% as well as stable cycling performance at a constant current density of 30 mA/g between 2.5 and 4.3 V versus Li at room temperature.

Detection and Analysis of Routine Blood Indexes in Guike Pig

[Objectives] In this study,routine blood indexes of Guike pig were detected to clarify quantity variation and morphology distribution of different functional cells（ red blood cells,white blood cells and platelets）,thus providing reference data for immunological evaluation and disease resistance research of Guike pig. [Methods] Blood samples were collected from forty-four 49-day-old healthy Guike pigs（ 22 males and 22 females） once a week for seven consecutive weeks to detect routine blood indexes,and the results were compared with routine blood indexes of Landrace pig and Enshi black pig. [Results]Among red blood cell indexes of Guike pig at different day ages,red blood cell count（ RBC） and hemoglobin count（ HGB） both reached the lowest levels（ 6. 85 × 10^12/L and 97. 1 g/L）at 70 days of age,which were significantly lower than the corresponding indexes at 49,56,63,84 and 91 days of age（ P 〈 0. 05,similarly hereinafter）; mean corpuscular hemoglobin（ MCH） and mean corpuscular hemoglobin concentration（ MCHC） demonstrated basically the same variation pattern,which both reached the lowest levels（ 15. 11 pg and 275. 70 g/L） at 70 days of age and reached the highest levels（ 16. 40 pg and 314. 30 g/L） at 91 days of age; hematocrit（ HCT）,mean corpuscular volume（ MCV） and red blood cell distribution width（ RDW） exhibited relatively stable changes with no significant differences among different day ages（ P 〉 0. 05,similarly hereinafter）. Among white blood cell indexes of Guike pig at different day ages,white blood cell count（ WBC） reached the lowest level（ 13. 71 × 10^9/L） at 63 days of age and reached the highest level（ 17. 52 × 10^9/L） at 84 days of age,with significant differences; neutrophil count（ NEUT）reached the lowest level（ 3. 61 × 10^9/L） at 70 days of age,which was significantly lower than that at 49,56 and 77 days of age; lymphocyte count（ LYMPH） exhibited relatively stable changes and was not significantly affected by the increase in day age. Among platelet indexes of Guike pig at different day ages,platelet count（ PLT）,thrombocytocrit（ PCT） and platelet volume distribution width（ PDW） exhibited relatively stable changes among different day ages,which were not significantly affected by the increase in day age. Compared to 35-day-old Landrace pig and 5-month-old Enshi black pig,most routine blood indexes of Guike pig were similar to or ranged between those of Landrace pig and Enshi black pig except HCT,mean platelet volume（ MPV）,PCT and PDW. [Conclusions]Guike pig has a certain uniqueness in routine blood indexes,which has developed a stable immune system at 49-91 days of age.

Synthesis and electrochemical properties of LiNi_(0.8)Al_(0.2-x)Ti_xO_2 cathode materials by an ultrasonic-assisted co-precipitation method

A new co-precipitation route was proposed to synthesize LiNi0.8A10.2-xTixO2 （x=0.0-0.20） cathode materials for lithium ion batteries, with Ni（NO3）2, Al（NO3）3, LiOH·H2O, and TiO2 as the starting materials. Ultrasonic vibration was used during preparing the precursors, and the precursors were protected by absolute ethanol before calcination in the air. The influences of doped-Ti content, calcination temperature and time, additional Li content, and ultrasonic vibration on the structure and properties of LiNi0.8A10.2-xTixO2 were investigated by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, and charge-discharge tests, respectively. The results show that the optimal molar fraction of Ti, calcination temperature and time, and additional molar fraction of Li for LiNi0.8A10.2-xTixO2 cathode materials are 0.1,700℃, 20 h, and 0.05, respectively. Ti doping facilitates the formation of the α-NaFeO2 layered structure, and ultrasonic vibration improves the electrochemical performance of LiNi0.8A10.2-xTixO2.

Co-precipitation/Hydrothermal Synthesis of BiFeO_3 Powder

A coprecipitation/hydrothermal route was utilized to fabricate pure phase BiFeO3 powders using FeCl3·6H2O and Bi（NO3）3·5H2O as starting materials, ammonia as precipitant and NaOH as mineralizer. The synthesized powders were characterized by XRD, SEM and DSC-TG analysis. In the process, single-phase BiFeO3 powders could be obtained at a hydrothermal reaction temperature of 180 ℃, with NaOH of 0.15 mol/L, in contrast to 200 ℃ and 4 mol/L for conventional hydrothermal route. Meanwhile, the micro-morphology of synthesized BiFeO3 powders changed with different reaction temperatures and concentrations of NaOH. The N6el temperature, Curie temperature and decomposition temperature of the synthesized BiFeO3 powders were detected to be 301 ℃, 828 ℃ and 964 ℃, respectively. The hydrothermal reactions mechanism to fabricate BiFeO3 powders were discussed based on the in-situ transformation process.

Effect of Ferric Chloride on the Properties of Biological Sludge in Co-precipitation Phosphorus Removal Process

This paper studied the effect of ferric chloride on waste sludge digestion,dewatering and sedimentation under the optimized doses in co-precipitation phosphorus removal process.The experimental results showed that the concentration of mixed liquid suspended solid(MLSS) was 2436 mg.L-1 and 2385 mg.L-1 in co-precipitation phosphorus removal process(CPR) and biological phosphorous removal process(BPR),respectively.The sludge reduction ratio for each process was 22.6% and 24.6% in aerobic digestion,and 27.6% and 29.9% in anaerobic digestion,respectively.Due to the addition of chemical to the end of aeration tank,the sludge content of CPR was slightly higher than that of BPR,but the sludge reduction rate for both processes had no distinct difference.The sludge volume index(SVI) and sludge specific resistance of BPR were 126 ml.g-1 and 11.7×1012 m.kg-1,respectively,while those of CPR were only 98 ml.g-1 and 7.1×1012 m.kg-1,indicating that CPR chemical could improve sludge settling and dewatering.

Nanostructured yttrium aluminum garnet powders synthesized by co-precipitation method using tetraethylenepentamine

Tetraethylenepentamine(C8H23N5,TEPA) has been used as a novel precipitant to synthesize yttrium aluminum garnet(Y3Al5O12,YAG) precursor from a mixed solution of aluminum and yttrium nitrates via a normal-strike co-precipitation method without controlling the pH value during precipitation process.The original precursor was analyzed by thermogravimetry/differential scanning calorimetry(TG/DSC).The evolution of phase composition and micro-structure of the as-synthesized YAG powders were characterized by X-ray ...

Co-precipitation preparation and burning performance test of delay composition containing barium chromate

In order to optimize the performance of delay composition containing barium chromate,the preparation conditions of barium chromate were optimized,and S/BaCrO 4/KClO 4 delay composition was prepared by co-precipitation using barium chromate as precipitant.Then,the ignition temperature,delay time and other burning performance were tested.The results show that the ignition temperature of S/BaCrO 4/KClO 4 delay composition prepared by co-precipitation method is higher than that by traditional mechanical mixing method;the burning rate is faster and the burning time precision is higher because co-precipitation method can make the components mix more evenly.This co-precipitation method with barium chromate can be extended to the preparation of other mixed explosive agents containing barium chromate.

Effects of Heating Processing on Microstructure and Magnetic Properties of Mn-Zn Ferrites Prepared via Chemical Co-precipitation

The fine powders of Mn-Zn ferrites with uniform size were prepared via chemical co- precipitation method. X-ray diffraction analysis （XRD）, scanning electron microscopy （SEM）, vibrating sample magnetometer （VSM）, frequency dependence of permeability and metallographical microscope were used to investigate the crystal structure, surface topography and magnetic properties of the powders and the sintering samples. The experimental results demonstrate that the precursor powders have formed a pure phase cubic spinel MnxZn1-xfe2O4 while in the reactor and show definite magnetism, which can solve the difficult issue in washing process effectively. When calcined beneath 450 ℃, the powders have intact crystal form and the crystallite size is less than 20 nm. Comparison tests of sintering temperatures show that 1 300 ℃ is the ideal sintering temperature for Mn-Zn ferrites prepared by using the chemical co-precipitation.

Synthesis of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_2 cathode material by chloride co-precipitation method

LiNi0.8Co0.1Mn0.1O2 was prepared by a chloride co-precipitation method and characterized by thermogravimetric analysis, X-ray diffractometry with Rietveld refinement,electron scanning microscopy and electrochemical measurements.Effects of lithium ion content and sintering temperature on physical and electrochemical performance of LiNi0.8Co0.1Mn0.1O2 were also investigated. The results show that the sample synthesized at 750℃with 105%lithium content has fine particle sizes around 200 nm and homogenous sizes distribution.The initial discharge capacity for the powder is 184 mA·h/g between 2.7 and 4.3 V at 0.1C and room temperature.