The Application of KMnO_4 Pre-oxidation in Emergency Treatment of High-algae Source Water

Mobile emergency pilot water plant was used to carry out pilot study of KMnO4 pre-oxidation enhanced coagulation treating high-algae source water. Research showed that the optimal dosages of coagulant and KMnO4 in the process were 6 and 0. 4- 0. 6 mg / L respectively. Under the dosage,removal rate of water turbidity after precipitation rose by 11% than simple coagulation,and removal rate of algae rose by 15%. Removal rates of total amount of odor and GSM by the process were respectively 73% and 59%. The removal rate of total amount of algae by KMnO4 preoxidation was 40%,and removal effect of THM precursors was obvious.

Coagulation behavior and floc properties of compound bioflocculant–polyaluminum chloride dual-coagulants and polymeric aluminum in low temperature surface water treatment

This study was intended to compare coagulation behavior and floc properties of two dualcoagulants polyaluminum chloride–compound bioflocculant（PAC–CBF）（PAC dose first） and compound bioflocculant–polyaluminum chloride（CBF–PAC）（CBF dose first） with those of PAC alone in low temperature drinking water treatment. Results showed that dualcoagulants could improve DOC removal efficiency from 30% up to 34%. Moreover, CBF contributed to the increase of floc size and growth rate, especially those of PAC–CBF were almost twice bigger than those of PAC. However, dual-coagulants formed looser and weaker flocs with lower breakage factors in which fractal dimension of PAC–CBF flocs was low which indicates a looser floc structure. The floc recovery ability was in the following order：PAC–CBF 〉 PAC alone 〉 CBF–PAC. The flocculation mechanism of PAC was charge neutralization and enmeshment, meanwhile the negatively charged CBF added absorption and bridging effect.

Efficacy of two chemical coagulants and three different filtration media on removal of Aspergillus flavus from surface water

Aquatic fungi are common in various aqueous environments and play potentially crucial roles in nutrient and carbon cycling as well as interacting with other organisms. Species of Aspergillus are the most common fungi that occur in water. The present study was undertaken to elucidate the efficacy of two coagulants, aluminum sulfate and ferric chloride, used at different concentrations to treat drinking water, in removing Aspergillusflavus, as well as testing three different filtration media： sand, activated carbon, and ceramic granules, for their removal of fungi from water. The results revealed that both coagulants were effective in removing fungi and decreasing the turbidity of drinking water, and turbidity decreased with increasing coagulant concentration. Also, at the highest concentration of the coagulants, A. flavus was decreased by 99.6% in the treated water. Among ceramic granules, activated carbon, and sand used as media for water filtration, the sand and activated carbon filters were more effective in removing A.flavus than ceramic granules while simultaneously decreasing the turbidity levels in the test water samples. Post-treatment total organic carbon （TOC） and total nitrogen （TN） concentrations in the experimental water did not decrease; on the contrary, TN concentrations increased with the increasing dosage of coagulants. The filtration process had no effect in reducing TOC and TN in tested water.

Comparison of different combined treatment processes to address the source water with high concentration of natural organic matter during snowmelt period

The source water in one forest region of the Northeast China had very high natural organic matter（NOM） concentration and heavy color during snowmelt period. The efficiency of five combined treatment processes was compared to address the high concentration of NOM and the mechanisms were also analyzed. Conventional treatment can hardly remove dissolved organic carbon（DOC） in the source water. KMn O4pre-oxidization could improve the DOC removal to 22.0%. Post activated carbon adsorption improved the DOC removal of conventional treatment to 28.8%. The non-sufficient NOM removal could be attributed to the dominance of large molecular weight organic matters in raw water, which cannot be adsorbed by the micropore upon activated carbon. O3＋ activated carbon treatment are another available technology for eliminating the color and UV254 in water. However, its performance of DOC removal was only 36.4%, which could not satisfy the requirement for organic matter. The limited ozone dosage is not sufficient to mineralize the high concentration of NOM. Magnetic ion-exchange resin combined with conventional treatment could remove 96.2%of color, 96.0% of UV254 and 87.1% of DOC, enabling effluents to meet the drinking water quality standard. The high removal efficiency could be explained by the negative charge on the surface of NOM which benefits the static adsorption of NOM on the anion exchange resin. The results indicated that magnetic ion-exchange resin combined with conventional treatment is the best available technology to remove high concentration of NOM.