Paleo-fires and Atmospheric Oxygen Levels in the Latest Permian:Evidence from Maceral Compositions of Coals in Eastern Yunnan,Southern China

Inertinite maceral compositions of the Late Permian coals from three sections in the terrestrial and paralic settings of eastern Yunnan are analyzed in order to reveal the paleo-fire events and the atmospheric oxygen levels in the latest Permian. Although the macerals in the studied sections are generally dominated by vitrinite, the inertinite group makes up a considerable proportion. Its content increases upward from the beginning of the Late Permian to the coal seam near the Permian- Triassic boundary. Based on the microscopic features and the prevailing theory that inertinite is largely a by-product of paleo-fires, we suggest that the increasing upward trend of the inertinite abundance in the latest Permian could imply that the Late Permian peatland had suffered from frequent wildfires. Since ignition and burning depend on sufficient oxygen, a model-based calculation suggests that the 02 levels near the Wuchiapingian/Changhsingian boundary and the Permian-Triassic boundary are 27% and 28% respectively. This output adds supports to other discoveries made in the temporal marine and terrestrial sediments, and challenges the theories advocating hypoxia as a mechanism for the PermianTriassic boundary crisis.

Maceral evolution of lacustrine shale and its effects on the development of organic pores during low mature to high mature stage:A case study from the Qingshankou Formation in northern Songliao Basin,northeast China

Organic matter(OM)hosted pores are crucial for the storage and migration of petroleum in shale reservoirs.Thermal maturity and macerals type are important factors controlling the development of pores therein.In this study,six lacustrine shale samples with different thermal maturities from the first member of the Qingshankou Formation in the Songliao Basin,of which vitrinite reflectance(R_(o))ranging from 0.58% to 1.43%,were selected for a comparative analysis.Scanning electron microscopy(SEM)and reflected light microscopy were combined to investigate the development of organic pores in different macerals during thermal maturation.The results show that alginite and liptodetrinite are the dominant primary macerals,followed by bituminite.Only a few primary organic pores developed in the alginite at the lowest maturity(R_(o)=0.58%).As a result of petroleum generation,oil-prone macerals began to transform to initial-oil solid bitumen at the early oil window(R_(o)=0.73%)and shrinkage cracks were observed.Initial-oil solid bitumen cracked to oil,gas and post-oil bitumen by primary cracking(R_(o)=0.98%).Moreover,solid bitumen(SB)was found to be the dominant OM when R_(o)>0.98%,which indicates that SB is the product of oil-prone macerals transformation.Many secondary bubble pores were observed on SB,which formed by gas release,while devolatilization cracks developed on migrated SB.Additionally,at the late oil window(Ro?1.16%),migrated SB filled the interparticle pore spaces.With further increase in temperature,the liquid oil underwent secondary cracking into pyrobitumen and gas,and spongy pores developed on the pyrobitumen at higher levels of maturity(Ro=1.43%),which formed when pyrobitumen cracked into gas.Vitrinite and inertinite are stable without any visible pores over the range of maturities,verifying their low petroleum generation potential.In addition,it was concluded that clay minerals could have a catalytic effect on the petroleum generation,which may explain why organicclay mixtures had more abundant pores than single OM particles.However,after R_(o)>0.98%,authigenic minerals occupied the organic pore spaces on the organic-clay mixtures,resulting in fewer pores compared to those observed in samples at the early to peak oil window.

Research on the maceral characteristics of Shenhua coal and efficient and directional direct coal liquefaction technology

In this research,molecular structure models were developed respectively for Shenhua coal vitrinite concentrates(SDV)and inertinite concentrates(SDI),on the basis of information on constitutional unit of Shenhau coal and elemental analysis results obtained from^(13)C-NMR analysis characterization,FTIR analysis characterization,X-ray diffraction XRD and XPS analysis characterization.It can be observed from characterization data and molecular structure models that the structure of SDV and SDI is dominated by aromatic hydrocarbon,with aromaticity of SDI higher than that of SDV;SDV mainly consists of small molecule basic structure unit,while SDI is largely made from macromolecular structure unit.Based on bond-level parameters of the molecular model,the research found through the autoclave experiment that vitrinite liquefaction process goes under thermodynamics control and inertinite liquefaction process under dynamics control.The research developed an efficient directional direct coal liquefaction technology based on the maceral characteristics of Shenhua coal,which can effectively improve oil yield and lower gas yield.

Preparation and coking properties of coal maceral concentrates

The concentrates with different maceral contents were obtained from Kailuan coking coals with different coal ranks(Ro;ranvarying from 0.88%to 1.73%)by float–sink separation in lab.Then these concentrates were characterized by proximate analysis,ultimate analysis,petrography analysis and coking index determination.The results show that the vitrinite is characterized as nature of lower carbon content,higher hydrogen content,higher volatile matter and stronger caking property compared to inertinite.The relationships between variation rate of volatile matter and maximum volatile matter and coal ranks are identified,and a linear model is developed for fast determination of the maceral contents.Compared to inertinite-rich concentrate,the blending ratio of vitrinite-rich concentrate is increased by 13%,which is considered to be a potential technique based on maceral separation for expanding the coking coal resources.

Microstructural relation of macerals with mineral matter in coals from Ib valley and Umaria, Son-Mahanadi basin, India

Coal petrology provides significant inputs for the industrial utilisation of coal and for broad understanding the coal formation and diagenesis. The present paper entails the results of the investigations carded out on the selected coal samples, from Ib valley and Umaria coalfield, using scanning electron microscope （SEM） and X-ray diffraction （XRD） to study the surface microstructures and minerals present in them and the relationship of the finely dispersed mineral matter with the organic constituents. This would further help in evaluating the distribution and chemical character of the mineral matter occurring within the maceral types. Ib valley and Umaria coals are typical Indian （Lower Gondwana） non-coking coals and only scanty data is available on SEM study of these coals. Under SEM examination, it manifests that, the mineral matters of these coal occur as deep intergrowth, massive impregnation, superficial mounting, filling and depletion of micropores, mechanical cavity filling and fusinitic cavity filling.

Numerical analysis on the factors affecting post-peak characteristics of coal under uniaxial compression

The post-peak characteristics of coal serve as a direct reflection of its failure process and are essential parameters for evaluating brittleness and bursting liability.Understanding the significant factors that influence post-peak characteristics can offer valuable insights for the prevention of coal bursts.In this study,the Synthetic Rock Mass method is employed to establish a numerical model,and the factors affecting coal post-peak characteristics are analyzed from four perspectives:coal matrix mechanical parameters,structural weak surface properties,height-to-width ratio,and loading rate.The research identifies four significant influencing factors:deformation modulus,density of discrete fracture networks,height-to-width ratio,and loading rate.The response and sensitivity of post-peak characteristics to single-factor and multi-factor interactions are assessed.The result suggested that feasible prevention and control measures for coal bursts can be formulated through four approaches:weakening the mechanical properties of coal pillars,increasing the number of structural weak surfaces in coal pillars,reducing the width of coal pillars,and optimizing mining and excavation speed.The efficacy of measures aimed at weakening the mechanical properties of coal is successfully demonstrated through a case study on coal burst prevention using large-diameter borehole drilling.

Geological characteristics and exploration breakthroughs of coal rock gas in Carboniferous Benxi Formation,Ordos Basin,NW China

To explore the geological characteristics and exploration potential of the Carboniferous Benxi Formation coal rock gas in the Ordos Basin,this paper presents a systematic research on the coal rock distribution,coal rock reservoirs,coal rock quality,and coal rock gas features,resources and enrichment.Coal rock gas is a high-quality resource distinct from coalbed methane,and it has unique features in terms of burial depth,gas source,reservoir,gas content,and carbon isotopic composition.The Benxi Formation coal rocks cover an area of 16×104km^(2),with thicknesses ranging from 2 m to 25 m,primarily consisting of bright and semi-bright coals with primitive structures and low volatile and ash contents,indicating a good coal quality.The medium-to-high rank coal rocks have the total organic carbon(TOC)content ranging from 33.49%to 86.11%,averaging75.16%.They have a high degree of thermal evolution(Roof 1.2%-2.8%),and a high gas-generating capacity.They also have high stable carbon isotopic values(δ13C1of-37.6‰to-16‰;δ13C2of-21.7‰to-14.3‰).Deep coal rocks develop matrix pores such as gas bubble pores,organic pores,and inorganic mineral pores,which,together with cleats and fractures,form good reservoir spaces.The coal rock reservoirs exhibit the porosity of 0.54%-10.67%(averaging 5.42%)and the permeability of(0.001-14.600)×10^(-3)μm^(2)(averaging 2.32×10^(-3)μm^(2)).Vertically,there are five types of coal rock gas accumulation and dissipation combinations,among which the coal rock-mudstone gas accumulation combination and the coal rock-limestone gas accumulation combination are the most important,with good sealing conditions and high peak values of total hydrocarbon in gas logging.A model of coal rock gas accumulation has been constructed,which includes widespread distribution of medium-to-high rank coal rocks continually generating gas,matrix pores and cleats/fractures in coal rocks acting as large-scale reservoir spaces,tight cap rocks providing sealing,source-reservoir integration,and five types of efficient enrichment patterns(lateral pinchout complex,lenses,low-amplitude structures,nose-like structures,and lithologically self-sealing).According to the geological characteristics of coal rock gas,the Benxi Formation is divided into 8 plays,and the estimated coal rock gas resources with a buried depth of more than 2000 m are more than 12.33×10^(12)m^(3).The above understandings guide the deployment of risk exploration.Two wells drilled accordingly obtained an industrial gas flow,driving the further deployment of exploratory and appraisal wells.Substantial breakthroughs have been achieved,with the possible reserves over a trillion cubic meters and the proved reserves over a hundred billion cubic meters,which is of great significance for the reserves increase and efficient development of natural gas in China.

Study on the pyrolysis behavior of Shendong Shangwan coal and its macerals concentrate

The pyrolysis characteristics of Shendong Shangwan coal and its macerals concentrate were investigated using thermogravimetry （TG） coupled with mass spectrometry （MS）. The evolved gases were analyzed online by MS spectroscopy. The results of TG/DTG （derivative thermogravimetry） show ths vitrinite concentrate has greater weight loss rate and higher volatile yield than the other two samples. More light hydrocarbons C1-C5 are released from the vitfinite concentrate than from the Shendong Shangwan coal and inertinite concentrated in the process of pyrolysis. Three samples have similar shape curves of evolved gases of C2~C5 with different intensities. When the pyrolysis temperature was lower than 418℃, the amount of C6H6 evolved in the process of pyrolysis of inertinite concentrated was higher than that of raw coal and vitrinite concentrate. As the temperature rising, the production rate of C6H6 increased. Below 672℃, C6H6 evolution rate of vitrinite concentrate was far greater than the other two samples; the main evolution temperature range of C7H8 was 400℃ to 700℃ for the three samples. The amount of HE and H20 released first increased and then decreased with the temperature increase while more H2 released for pyrolysis of inertinite concentrated and more H20 released for the pyrolysis of vitrinite concentrate.

Disasters of gas-coal spontaneous combustion in goaf of steeply inclined extra-thick coal seams

In light of the escalating global energy imperatives,mining of challenging-to-access resources,such as steeply inclined extra-thick coal seams(SIEC),has emerged as one of the future trends within the domain of energy advancement.However,there is a risk of gas and coal spontaneous combustion coupling disasters(GCC)within the goaf of SIEC due to the complex goaf structure engendered by the unique mining methodologies of SIEC.To ensure that SIEC is mined safely and efficiently,this study conducts research on the GCC within the goaf of SIEC using field observation,theoretical analysis,and numerical modeling.The results demonstrate that the dip angle,the structural dimensions in terms of width-to-length ratio,and compressive strength of the overlying rock are the key factors contributing to the goaf instability of SIEC.The gangue was asymmetrically filled,primarily accumulating within the central and lower portions of the goaf,and the filling height increased proportionally with the advancing caving height,the expansion coefficient,and the thickness of the surrounding rock formation.The GCC occurs in the goaf of SIEC,with an air-return side range of 41 m and an air-intake side range of 14 m,at the intersection area of the“<”-shaped oxygen concentration distribution(coal spontaneous combustion)and the“>”-shaped gas concentration distribution(gas explosion).The optimal nitrogen flow rate is 1000 m3/h with an injection port situated 25 m away from the working face for the highest nitrogen diffusion efficacy and lowest risk of gas explosion,coal spontaneous combustion,and GCC.It has significant engineering applications for ensuring the safe mining of SIEC threatened by the GCC.

Stability analysis of longwall top-coal caving face in extra-thick coal seams based on an innovative numerical hydraulic support model

The relationship between support and surrounding rock is of great significance to the control of surrounding rock in mining process.In view of the fact that most of the existing numerical simulation methods construct virtual elements and stress servo control to approximately replace the hydraulic support problem,this paper establishes a new numerical model of hydraulic support with the same working characteristics as the actual hydraulic support by integrating numerical simulation software Rhino,Griddle and FLAC3D,which can realize the simulation of different working conditions.Based on this model,the influence mechanism of the supporting strength of hydraulic support on surrounding rock stress regulation and coal stability in front of the top coal caving face in extra thick coal seam were researched.Firstly,under different support intensity,the abutment pressure of the bearing coal and the coal in front of it presents the “three-stage”evolution characteristics.The influence range of support intensity is 15%–30%.Secondly,1.5 MPa is the upper limit of impact that the support strength can have on the front coal failure area.Thirdly,within a displacement range of 2.76 m from the coal wall,a support strength of1.5 MPa provides optimal control of the horizontal displacement of the coal.

Flotation characteristics of Shenfu coal macerals

The flotation characteristics of Shenfu coal macerals was researched. Taking flotation recovery and enrichment of macerals as the evaluation objects, the influence of the agent dosage, pulp concentration, impeller speed and aeration rate on the separating effect was investigated. And the optimum process conditions of flotation were confirmed. The results show that the agent dosage, pulp concentration, impeller speed and aeration rate have a significant impact on flotation recovery and en- richment of macerals. The float recovery was 73.28% and enrichment ratio of vitrinite was 83.89% when CTAB dosage of 1.0 kg/t, pulp concentration of 100 g/L, impeller speed of 1 700 r/min and aeration rate of 0.25 m3/（m2·min） were used. The tailings yield was 60.30% and enrichment ratio of inertinite was 61.44% when CTAB dosage of 0.5 kg/t, pulp concentration of 100 g/L, impeller speed of I 700 r/min and aeration rate of 0.20 m3/（m2·min） were used.

Influence of microwave treatment under a hydrogen or methane atmosphere on the flotability of the macerals in Shenfu coals

The modification of Shenfu coals by a microwave treatment carried out under a hydrogen or a methane atmosphere, and the subsequent maceral separation by flotation, are described in this paper. The surface contact angle and the Zeta potential of the coal macerals were measured both with and without the treat- ment. The results show that the surface wettability of SFF (Shenfu Fusain) and SFV (Shenfu Vitrain) can be changed by the microwave treatment. An increase in the difference in surface wettability of SFF and SFV causes in a subsequent increase in the enrichment of inertinite and vitrinite. The results of the Zeta potential measurements show that the surface potentials of SFF and SFV are also changed by the treatment.

Structural properties of residual carbon in coal gasification fine slag and their influence on flotation separation and resource utilization:A review

Coal gasification fine slag(FS)is a typical solid waste generated in coal gasification.Its current disposal methods of stockpil-ing and landfilling have caused serious soil and ecological hazards.Separation recovery and the high-value utilization of residual carbon(RC)in FS are the keys to realizing the win-win situation of the coal chemical industry in terms of economic and environmental benefits.The structural properties,such as pore,surface functional group,and microcrystalline structures,of RC in FS(FS-RC)not only affect the flotation recovery efficiency of FS-RC but also form the basis for the high-value utilization of FS-RC.In this paper,the characteristics of FS-RC in terms of pore structure,surface functional groups,and microcrystalline structure are sorted out in accordance with gasification type and FS particle size.The reasons for the formation of the special structural properties of FS-RC are analyzed,and their influence on the flotation separation and high-value utilization of FS-RC is summarized.Separation methods based on the pore structural characterist-ics of FS-RC,such as ultrasonic pretreatment-pore-blocking flotation and pore breaking-flocculation flotation,are proposed to be the key development technologies for improving FS-RC recovery in the future.The design of low-cost,low-dose collectors containing polar bonds based on the surface and microcrystalline structures of FS-RC is proposed to be an important breakthrough point for strengthening the flotation efficiency of FS-RC in the future.The high-value utilization of FS should be based on the physicochemical structural proper-ties of FS-RC and should focus on the environmental impact of hazardous elements and the recyclability of chemical waste liquid to es-tablish an environmentally friendly utilization method.This review is of great theoretical importance for the comprehensive understand-ing of the unique structural properties of FS-RC,the breakthrough of the technological bottleneck in the efficient flotation separation of FS,and the expansion of the field of the high value-added utilization of FS-RC.

Theoretical analysis of hydrogen solubility in direct coal liquefaction solvents

The cyclic hydrogenation technology in a direct coal liquefaction process relies on the dissolved hydrogen of the solvent or oil participating in the hydrogenation reaction.Thus,a theoretical basis for process optimization and reactor design can be established by analyzing the solubility of hydrogen in liquefaction solvents.Experimental studies of hydrogen solubility in liquefaction solvents are challenging due to harsh reaction conditions and complex solvent compositions.In this study,the composition and content of liquefied solvents were analyzed.As model compounds,hexadecane,toluene,naphthalene,tetrahydronaphthalene,and phenanthrene were chosen to represent the liquefied solvents in chain alkanes and monocyclic,bicyclic,and tricyclic aromatic hydrocarbons.The solubility of hydrogen X(mol/mol)in pure solvent components and mixed solvents(alkanes and aromatics mixed in proportion to the chain alkanes+bicyclic aromatic hydrocarbons,bicyclic saturated aromatic hydrocarbons+bicyclic aromatic hydrocarbons,and bicyclic aromatic hydrocarbons+compounds containing het-eroatoms composed of mixed components)are determined using Aspen simulation at temperature and pressure conditions of 373–523 K and 2–10 MPa.The results demonstrated that at high temperatures and pressures,the solubility of hydrogen in the solvent increases with the increase in temperature and pressure,with the pressure having a greater impact.Further-more,the results revealed that hydrogen is more soluble in straight-chain alkanes than in other solvents,and the solubility of eicosanoids reaches a maximum of 0.296.The hydrogen solubility in aromatic ring compounds decreased gradually with an increase in the aromatic ring number.The influence of chain alkanes on the solubility of hydrogen predominates in a mixture of solvents with different mixing ratios of chain alkanes and aromatic hydrocarbons.The solubility of hydrogen in mixed aromatic solvents is less than that in the corresponding single solvents.Hydrogen is less soluble in solvent compounds containing heteroatoms than in compounds without heteroatoms.

Explanation for peat-forming environments of coal seam 2 and 9^(-2)based on the maceral composition and aromatic compounds in the Xingtai coalfield,China

Maceral composition and aromatic compounds were determined on columnsamples to study the peat-forming environments of Permian coal seam 2 and Carboniferouscoal seam 9^(-2) from the Xingtai coalfield,China.The macerals were dominated by inertinitein seam 2 and by vitrinite in seam 9^(-2).Three maceral groups were selected as indicatorsof peat-forming environments.Two triangle diagrams were drawn based on the indicatorsto explicate the peat-forming environments of permian seam 2 and Carboniferousseam 9^(-2).The results indicate that the peat of carboniferous seam 9^(-2) formed dominantlyin wet swamps,whereas the peat of Permian seam 2 formed dominantly in dry swampsand open moor environments.

Organic petrographic and mineralogical composition of the No. 6 coal seam of the Soutpansberg Coalfield, South Africa: Insights into paleovegetation and depositional environment

This study investigates the paleodepositional conditions of the No.6 Seam of the Madzaringwe Formation in Makhado and Voorburg south area of the Soutpansberg Coalfield(Limpopo Province,South Africa)utilizing organic petrography and inorganic geochemical proxies.The coals are predominantly high-volatile bituminous B-A rank with high ash yields(avg.36.1 wt%),characterized by high-vitrinite(~41.5 vol%),moderate-to-high inertinite(9.8 vol%–33.7 vol%)and low liptinite(~2.3 vol%).The distribution of inertinite varies among different coal horizons(from bottom-lower to middle-upper),suggesting differential oxidation conditions and/or paleofire occurrence.Vitrinite-to-inertinite(V/I)ratio,tissue preservation–gelification index(TPI–GI),and groundwater–vegetation index(GWI–VI)plots,indicate that the peat-forming forest-swamp vegetation accumulated under mesotrophic-to-rheotrophic hydrological conditions.The presence of structured macerals(i.e.,telinite,collotelinite,fusinite,and semifusinite)suggests well-preserved plant tissues,whereas framboidal pyrite and sulphur content(0.24 wt%–2.16 wt%)point to brackish-water influence at the peat stage.The coals contain quartz,kaolinite,siderite,muscovite,dolomite,calcite,and pyrite minerals,most of which were likely sourced from felsic igneous rocks.The Al/(Al+Fe+Mn)and(Fe+Mn)/Ti ratios for the studied samples range between 0.24–0.97 and 0.57–70.10,respectively.The ratios,Al–Fe–Mn plot,and presence of massive botryoidal-type pyrite imply some influence of meteoric waters or fluids from hydrothermal activity post-deposition.Moreover,the chemical index of alteration(CIA:98.25–99.67),chemical index of weathering(CIW:92.04–97.66),and A–CN–K ternary diagram suggest inorganic matter suffered strong chemical weathering,indicating warm paleoclimatic conditions during the coal formation.

多功能CoAl-LDH/CdS光催化剂的制备及其性能研究

在能源危机和环境污染的双重挑战下,开发集能量转化和环境治理于一体的多功能光催化剂是促进太阳能-化学能转化的有效策略。采用正六边形的CoAl-LDH纳米薄片为载体,通过原位生长CdS纳米颗粒的方法,构建了CoAl-LDH/CdS的Ⅱ型异质结。利用CoAl-LDH纳米薄片在可见光区域的宽普吸收性和良好载体的特性,结合CdS的高光量子产率,再通过异质结构的构建,获得了多功能CoAl-LDH/CdS光催化材料。并通过优化CdS的负载量,获得的CoAl-LDH/CdS-2光催剂降解罗丹明B的降解率最大(在光催化降解时间t=60 min时内,降解率=88.48%),分别是CdS和CoAl-LDH单体的1.18倍和8.62倍。其中CoAl-LDH/CdS-1的CO产量最高为39.02 mol/g,分别是纯CoAl-LDH和纯CdS的4.2倍和2.5倍,这主要归功于复合材料中CoAl-LDH纳米片和CdS纳米颗粒间紧密异质结构的构建,丰富的耦合界面大大降低了光生载流子的复合率,这为多功能光催化剂的开发提供了理论基础。

Chemical looping gasification of maceral from low-rank coal: Products distribution and kinetic analysis on vitrinite

The product distribution and kinetic analysis of low-rank coal vitrinite were investigated during the chemical looping gasification(CLG)process.The acid washing method was used to treat low-rank coal,and the density gradient centrifugation method was adopted to obtain the coal macerals.By combining thermogravimetric analysis and online mass spectrometry,the influence of the heating rate and oxygen carrier(Fe2O3)blending ratio on product distribution was discussed.The macroscopic kinetic parameters were solved by the Kissinger-Akahira-Sunose(KAS)method,and the main gaseous product formation kinetic parameters were solved by the iso-conversion method.The results of vitrinite during slow heating chemical looping gasification showed that the main weight loss interval was 400–600℃,and the solid yield of sample vitrinite-Fe-10 at different heating rates was 64.30%–69.67%.When b=20℃·min^(-1),the maximum decomposition rate of vitrinite-Fe-10 was 0.312%min1.The addition of Fe2O_(3)reduced the maximum decomposition rate,but by comparing the chemical looping conversion characteristic index,it could be inferred that the chemical looping gasification of vitrinite might produce volatile substances higher than the pyrolysis process of vitrinite alone.The average activation energy of the reaction was significantly reduced during chemical looping gasification of vitrinite,which was lower than the average activation energy of 448.69 kJ·mol^(-1) during the pyrolysis process of vitrinite alone.The gaseous products were mainly CO and CO_(2).When the heating rate was 10℃·min^(-1),the highest activation energy for CH4 formation was 21.353 kJ·mol^(-1),and the lowest activation energy for CO formation was 9.7333 kJ·mol^(-1).This study provides basic data for exploring coal chemical looping gasification mechanism and reactor design by studying the chemical looping gasification process of coal macerals。

Compositional and Structural Study of Macerals in Coals and Source Rocks Using SIMS

The authors applied the Secondary Ion Mass Spectrometry (SIMS) technique to the analysis of compositions and structures of vitrinites fusinites, fusinites bitumens and graptolites in the hydrocarbon source rocks with different maturities dscribed their SIMS spectral characteristics and found that different macerals have differnt spectra which, reflected the compositional and structural differences of macerals. Moreover, the change bod of parameter CH2+/CH3+ can be used for the evaluation of thermal evolution regularity of macerals in the hydrocarbon source rocks The study results show that the SIMS technique is a powerful means for microara analysis of macerals in coals and source rocks. It is certain that the study level of macerals can be raised by detailed study of SIMS results of SIMS results of macerals.

Depositional Environment and Origin of Inertinite-rich Coal in the Ordos Basin

Inertinite-rich coal is widely distributed in the Ordos Basin,represented by the No.2 coal seam of the Middle Jurassic Yan'an Formation.This paper combined coal petrology and geochemistry to analyze the origin of inertinite,changes in the coal-forming environment and control characteristics of wildfire.Research has shown that there are two forms of inertinite sources in the study area.Alongside typical fusinization,wildfire events also play a substantial role in inertinite formation.There are significant fluctuations in the coal-forming environment of samples at different depths.Coal samples were formed in dry forest swamp with low water levels and strong oxidation,which have a high inertinite content,and the samples formed in wet forest swamp and limnic showed low inertinite content.Conversely,the inertinite content of different origins does not fully correspond to the depositional environment characterized by dryness and oxidation.Nonpyrogenic inertinites were significantly influenced by climatic conditions,while pyrofusinite was not entirely controlled by climatic conditions but rather directly impacted by wildfire events.The high oxygen level was the main factor causing widespread wildfire events.Overall,the combination of wildfire activity and oxidation generates a high content of inertinite in the Middle Jurassic coal of the Ordos Basin.