A Gasification Technology to Combine Oil Sludge with Coal-Water Slurry:CFD Analysis and Performance Determination

The development of more environment-friendly ways to dispose of oil sludge is currently regarded as a hot topic.In this context,gasification technologies are generally seen as a promising way to combine oil sludge with coal–water slurry(CWS)and generate resourceful fuel.In this study,a novel five-nozzle gasifier reactor was analyzed by means of a CFD(Computational fluid dynamic)method.Among several influential factors,special attention was paid to the height-to-diameter ratio of the gasifier and the mixing ratio of oil sludge,which are known to have a significant impact on the flow field,temperature distribution and gasifier performances.According to the numerical results,the optimal height-to-diameter ratio and oil mixing ratio are about 2.4:1 and 20%,respectively.Furthermore,the carbon conversion rate can become as high as 98.55%with the hydrolysis rate reaching a value of 53.88%.The consumption of raw coal and oxygen is generally reduced,while the effective gas production is increased to 50.93 mol/%.

Effect of the benzene ring of the dispersant on the rheological characteristics of coal-water slurry:Experiments and theoretical calculations

In this study,low-rank coal-water slurry(LCWS)was prepared using polyoxyethylene dodecylphenol ether(PDPE)and polyoxyethylene lauryl ether(PLE),respectively.A combination of experiments and simulations was used to investigate the pulping properties and microscopic mechanism of the LCWS samples prepared using the two agents,so as to explore the influence of benzene ring on the performance of dispersant.The results of the LCWS preparation experiments revealed that the pulp-forming performance of PDPE exceeded that of PLE.When LCWS concentration is 62%,64%,and 66%,the apparent viscosity corresponding to PDPE is 247.80,504.17,and 653.10 mPa·s,and the apparent viscosity corresponding to PLE is 548.10,1470.61,and 1549.98 mPa·s,respectively.The C_(1000)(When the apparent viscosity is 1000 mPa·s,the corresponding concentration of LCWS is defined as C_(1000))values of PDPE and PLE are 67.60%and 62.95%,respectively.In addition to the van der Waals forces and hydrogen bonds between the PDPE and/or PLE molecules and coal,the benzene rings of PDPE presentπ-πstacking effect with the aromatic rings of coal.That could facilitate and strengthen the adsorption of PDPE on coal,which would be conducive to further improving the dispersion of coal particles.The two dispersants have no significant difference in effect on the pyrolysis of LCWS.The simulation results indicated that the times for PDPE and PLE molecules to reach flat adsorption state on coal are approximately 290 and 565 ps,respectively.The self-diffusion coefficient(D)of the PDPE and PLE on coal is 3.16 x 10^(-6)and6.57×10^(-6)m~2/s,respectively,and their interaction energies with coal are 785.71 and 648.60 kcal/mol,respectively.The results of the simulation calculations demonstrated that PDPE adsorbed on coal easier than PLE,and its binding is more stable than that of PLE owing to theπ-πstacking effect,which is conducive to uniform dispersion of coal in solution.The simulation results confirmed the experimental results.

Multi-criteria comparative analysis of the pressure drop on coal gangue fly-ash slurry at different parts along an L-shaped pipeline

Disposing of coal gangue and fly-ash on the surface is a risky method with tremendous potential catastrophic consequences for the environment.Backfill mining is a promising practice for turning those hazardous wastes into functional backfill materi-als.Unfortunately,how to efficiently deliver the slurry to the desired places remains under-researched.To address this issue,the computational fluid dynamics software Fluent was used in the current study in addition to a laboratory rheological test to simulate the impact of various parameters on the evolution of pressure at a particular section of the pipeline.Furthermore,the response surface method was employed to investigate how the various components and their corresponding influencing weights interact to affect the pressure drop.This study demonstrates that the pressure drop of the slurry is highly influenced by slurry concentration,speed,and pipe diameter.While conveying speed is the main component in the bend section,pipe diameter takes over in the horizontal and vertical pipe sections.

Application of coal-water slurry on the rotary calcining kiln of pedgion magnesium reduction process

Energy saving has been an important concept in modern industry especially to the countries and regions with energy shortage such as China and Japan. Utilization of Coal-Water Slurry （CWS） can improve the burning efficiency of coal and reduce the pollutions of soot, sulfide and the nitride by burning lump coal directly. The CWS is a promising energy saving technique and the effectual substitute of oil. The study on the preparation and application of the CWS has made progresses in many aspects. The present paper studied the basal problems for applying the CWS on the rotary kilns during the calcining-dolomite process in the magnesium factory, summarized the key points for the application process of the CWS and gave the corresponding solutions.

Combustion and Sulfur-fixing Performance of Pulping Black Liquor Coal-water Slurry

The effects of adding pulping black liquor and other additives to coal-water slurry(CWS) on the sulfur-fixing performance of the resultant mixture(pulping black liquor coal-water slurry) were evaluated. The experimental results demonstrated that the ash content of the black liquor coalwater slurry decreased as the addition of pulping black liquor in the mixture increased. Nevertheless, the addition amount should be appropriately selected to ensure that the black liquor coal-water slurry had a moderate calorific value. Addition of black liquor improved the combustion performance of CWS by lowering the ignition point and stabilizing the combustion process; moreover, the sulfur-fixation ratio after combustion increased by 12 to 16 percentage points than that of CWS, and the content of high-melting-point salt in the ash from CWS after adding black liquor was low. The sulfur-fixing ratio of CWS after adding a sulfur-fixing agent was effectively increased by 25 to 30 percenatge points, but with compromise of the fluidity and stability of the CWS; thus, the addition amount of a sulfur-fixing agent should be optimized.

Effect of slurry conditioning on flocculant-aided filtration of coal tailings studied by low-field nuclear magnetic resonance and X-ray micro-tomography

The present work aimed to study the effect of slurry conditioning on flocculant-aided filtration of coal tailings by the analysis of filtration kinetics and filter cake structure.Laboratory filtration tests of the coal tailings showed that both the shear rate and agitation time have significant effects on filtration rate and cake moisture.Moderate agitation at the shear rate of 92 s^-1 was favorable for fast filtration,but high cake moisture was encountered.The low-field 1H nuclear magnetic resonance(NMR)measurements of the filter cake showed that the slurry conditioning has a significant effect on the residual water in large pores and a negligible effect on the residual water in small pores.The X-ray micro-tomography(XRM)measurements indicated that the filter cake formed at the shear rate of 92 s^-1 has more macro-pores and higher porosity than that formed at the shear rate of 53 s1,hence more residual water was entrapped in filter cake.The slurry conditioning in the presence of flocculant will change the structure of filter cake and affect the filtration performance.There was a paradox between fast filtration rate and low filter cake moisture.The findings enable better understanding of the effect of slurry conditioning on flocculant-aided filtration of coal tailings.

Settling,consolidation and shear strength behaviour of coal tailings slurry

The volume change and shear strength behaviour of tailings slurry with the changes in gravimetric moisture content is important to effectively utilise the storage volume and analysis of dam failure potential.Consolidation testing of tailings from a slurry-like to soil-like state is a critical task,and conventional consolidation apparatus does not have the capability of doing such testing,as the tailings slurries contain high water content.Settling tests conducted on slurries having a 25%solids concentration showed very low efficiency;final sediment was still slurry-like.An intrinsic point was identified based on pore water pressure dissipation during consolidation tests in a slurry consolidometer that can define two states of the tailings i.e.slurry-like and soil-like.In the slurry-like state,the volume change was greater for Slurry 2 than Slurry 1,while the inverse was observed in the soil-like state.The evolution of peak vane shear strength with the changes in moisture content was almost similar for both samples and obeyed the power function.Regression models have been developed and validated to predict the shear strength of materials at any gravimetric moisture content or void ratio.

Characteristics of coal sludge slurry prepared by a wet-grinding process

Coal sludge slurry(CSS) is an alternative fuel and a potential competitive method for sludge reduction.Based on the researches of coal water slurry, we studied CSSs by using a wet-grinding process with different types of regional municipal sludge(sludge) in an orthogonal experiment. The sludge type,sludge mixing proportion, dosage of dispersant, and grinding time were tested in this study. The results show that water content and its occurrence characteristics in the sludge have primary hindering influences on slurry ability. The range of fixed-viscosity concentrations with raw wet sludge is from 50.78%to 44.40%(by weight), while the range is from 53.35% to 51.51%(by weight) with dry sludge. All of the CSSs exhibit shear-thinning behaviors with different variation trends, especially the CSSs with more than 15%(by weight) raw wet sludge in it. Adding the same proportion of raw wet sludge increases the thixotropic properties of CSSs and the highest area of thixotropy loop is 3065 Pa/s, while the highest value of dry sludge is 1798 Pa/s. Hydrophilic group plays an important role in adsorbing water and building three-dimension networks with other particles, which is the main reason for CSS properties.Therefore, the mechanism can be used to find the way for making high quality CSS.

Effects of fractal surface on rheological behavior and combustion kinetics of modified brown coal water slurries

The paper reports the effects of surface fractal structures on the rheological behavior and combustion kinetics of raw brown coal and three modified coal water slurries （CWSs）. The results show that the fractal structures and physicochemical properties of samples are dependent on various modification processes. The apparent viscosities of the coal water slurries increase with increasing surface fractal dimensions （D）, especially with decreasing shear rates. Fur- thermore, it has been proved that the ignition temperatures and apparent activation energies of modified CWSs are lower than that of raw coal water slurry. Compared with the traditional qualitative analysis of the effect of pore structures on CWSs properties, D can more efficiently indicate the quantificational effect of pore structures on the rheological behavior and combustion kinetics of CWSs.

Blended coals for improved coal water slurries

Three coal samples of different ranks were used to study the effect of coal blending on the preparation of Coal Water Slurry (CWS). The results show that by taking advantage of two kinds of coal, the coal concentration in slurry made from hard-to-pulp coal can be effectively improved and increased by 3%–5% generally. DLT coal (DaLiuTa coal mine) is very poor in slurryability and the stability and rheology of the resulting slurry are not very good. When the amount of easily slurried coal is more than 30%, all properties of the CWS improve and the CWS meets the requirements for use as fuel. Coalification, porosity, surface oxygenic functional groups, zeta potential and grindability have a great effect on the performance of blended coal CWS. This leads to some differences in performance between the slurry made from a single coal and slurry made from blended coal.

Co-processing petroleum catalytic slurry with coal

It is studied that reactivity of petroleum catalytic slurry （PCS） and coal with Fe catalyst in 1 L autoclave, the fol- lowing is mainly discussed, coal conversion and asphalt properties, especially related with petroleum cracking slurry （PCS） properties. The results show that co-processing conversion and asphalt yield increase with the increase of PCS ratio. PCS prop- erties have important effect on coal conversion and asphalt properties. One kind of PCS shows negative effect on coal conver- sion. High aromatic PCS can lead to high ductility asphalt with good colloid properties. Coal and the PCS can lead to a strong matching effect.

Simulation analysis of ammonia distribution in methanol production from coal water slurry gasification

Aspen plus software was employed to simulate process. The system concludes gasification scrubbing system the opposed multi-burner gasifier （OMB） methanol production and purification shift system. The distributions of ammonia con- centration in streams were obtained. The study demonstrates that ammonium crystallization problem caused by ammonia ac- cumulation, and if the process has ammonia exports its concentration will greatly reduced and the ammonia salt problem will effectively alleviate. Aspen plus simulation is a useful tool strengthening the ammonia recycling use and reducing pollutant for improving water quality, maintaining stable production, emissions.

A novel suspension-floating-circulating fluidized combustion technology for coal slurry

A novel suspension-floating-circulating fluidized combustion technology is proposed for burning coal slurry fuel in traditional circulating ftuidized bed boilers （CFBB）. This technology can solve some existing problems in large- capacity CFBB burning coal slurry. The principles of the suspension-floating-circulating fluidized combustion technology were introduced in detail in this paper. A 130 t/h CFBB was retrofitted based on the technology, and the retrofitted system mainly includes a long-distance transport sub-system, a bed-material conveying sub-system with a wind-seal device invented by the authors, a superheater thermoregulation device using a novel temperature regulator, a return loop flu- idization facility, and a pneumatic ash conveying sub-system with sealed pump. The achieved performance of the retro- fitted CFBB shows that the thermal efficiency is 89.83 %, the combustion efficiency is 96.24 %, and the blending proportion of slurry is 94 %.

Form transition of sodium during combustion of black liquor coal slurry

Several typical ash samples from a 0.25 MW test furnace fired black liquor coal slurry were selected for investigation. The phases and compounds containing sodium in ash samples were acquired from X-ray diffraction analyses. As well, detailed analyses of the amounts of major mineral elements along thickness gradients of representative ash samples were carried out. The elements, including Na, Si, A1, S and C1 were analyzed by the advanced electron probe microanalyzer equipment, which provid evidence and interpretation for the analytical results of XRD. The findings indicate that the occurrence form of sodium has experi- enced important changes during the combustion of black liquor coal slurry, which translated into nepheline, thenardite, sodium sulfate, sodium chloride, sodium silicoaluminate, hanyne and other phases containing sodium, from NaOH, Na2CO3 and Na2S in raw fuel. Of all the sodium compounds, nepheline, thenardite and sodium sulfate are the most important forms of Na in solid com- bustion residues. Such a transformation of Na during the combustion of black liquor coal slurry resulted in a considerable impact on ash deposition and is not only different from the raw coal and papermaldng black liquors, but is also affected by local circum- stances in the combustion furnace. Amounts of Na, S and C1 in ash deposits from low temperature zones were larger than those from high temperature zones. Our findings should provide important theoretical instructions for industrial applications of black liquor coal slurry.

Life Cycle Assessment of Ultra-clean Micronized Coal Oil Water Slurry

Life cycle assessment is applied to assess the ultra-clean micronized coal oil water slurry (UCMCOWS) with SimaPro and the environmental impact of UCMCOWS on its whole life cycle is also analyzed. The result shows that the consumption of energy and products are increasing along with the deepening of UCMCOWS processing, UCMCOWS making and combustion are the two periods which have a bigger impact on eco-system and human health. As a new substitute of fuel, UCMCOWS merits to be utilized more efficiently and reasonably.

Theoretical Models of Light Scattering Applied in Sizing Particles in Coal Water Slurry

Advantges and disadvantage of Mie scattering model and Fraunhofer diffraction model are discussed. The result shows that 1) the Fraunhofer diffraction model is simple in design and fast in operation, which is quite suitable for on-line control and 2) the intensity and energy distribution of diffracted light of both the Mie scattering model and the Fraunhofer theoretical model are compared and researched. Feasibility of using the Fraunhofer diffraction model to replace the Mie scattering model in measuring particles in coal water slurry is demonstrated.

Characterization of coal water slurry prepared for PRB coal

Powder River Basin(PRB)coal,which accounts for over 40%of the coal consumed for power generation in the United States,was investigated for preparation of coal water slurry(CWS).The static stability and rheology of the CWS were characterized as a function of loading.The coal loading was varied from 30%to 50%and both ionic(sodium polystyrene sulphonate(PSS))and nonionic(Triton X-100)surfactants were employed as additives.The addition of PSS to PRB slurries was found to yield poor static stability.On the other hand,Triton X-100 was found to be an effective surfactant,reducing the sedimentation by more than 50%compared to the one without surfactant in 45%CWS.Adding Triton X-100 reduces the viscosity of the CWS for coal loadings of30%and 40%.Although the viscosities for coal loading of 42.5%and 45%are higher when Triton X-100 is added,the static stability is significantly better than for samples without surfactant.The highest coal loading for PRB slurry with acceptable viscosity for pumping is 42.5%.

Off-design Characteristics of IGCC System Based on Two-stage Coal-slurry Gasification Technology

整体煤气化联合循环（integrated gasification combinedcycle,IGCC）机组在一定情况下处于非设计工况运行。为了研究IGCC系统变工况特性,采用ThermoFlex软件建立基于两段式水煤浆气化技术的200 MW级整体煤气化联合循环系统模型,主要考查燃气轮机负荷、整体空分系数Xas、大气温度、大气压力对系统性能的影响。研究结果表明,降低燃气轮机负荷或者提高大气温度系统效率均呈先升高而后降低的趋势。整体空分系数Xas增加,机组发电效率降低。大气压力对系统效率影响较小。上述条件下采用两段水煤浆气化技术,系统性能可以得到有效改善。研究结果可为采用两段式水煤浆气化技术的IGCC系统的设计、运行提供参考。

Discussion on Wear Mechanism of High Chrome Brick Used in Coal Slurry Gasifier

The microstructure and phase composition of high chrome brick used in coal slurry gasifier has been analyzed by means of SEM and Energy Spectrum. The results indicate that the used brick can be divided into different zones as slag-adhered zone, reaction zone, penetration zone and unaltered zone. The phase composition and microstructure are different and cracks occurred in different degree at these zones. A dense ring belt was formed with complex spinel (Mg,Fe)(Cr,Al,Fe 2O 4) in the reaction zone near the hot face. The wear mechanism of the brick during its employment has been discussed. It is considered that the reaction and penetration of coal slag and strong reductant bring about the composition change of the brick and destroys its original network inlayed structure and consequently result in its structure spalling and weakening strength, which is the main wear mechanism of the brick and followed by temperature fluctuation and high mechanical impact of flowing fluid with high-speed.

Main Influencing Factors on Service Life of High Chrome Refractories for Coal Water Slurry Gasifiers

The main characteristics of high chrome refractories for coal water slurry gasifiers were introduced. The damage mechanism of the refractories was analyzed by observing the microstructure of the used high chrome refractories with the aid of SEM. The main influencing factors on the service life of the refractories were summarized.