Geological characteristics and exploration breakthroughs of coal rock gas in Carboniferous Benxi Formation,Ordos Basin,NW China

To explore the geological characteristics and exploration potential of the Carboniferous Benxi Formation coal rock gas in the Ordos Basin,this paper presents a systematic research on the coal rock distribution,coal rock reservoirs,coal rock quality,and coal rock gas features,resources and enrichment.Coal rock gas is a high-quality resource distinct from coalbed methane,and it has unique features in terms of burial depth,gas source,reservoir,gas content,and carbon isotopic composition.The Benxi Formation coal rocks cover an area of 16×104km^(2),with thicknesses ranging from 2 m to 25 m,primarily consisting of bright and semi-bright coals with primitive structures and low volatile and ash contents,indicating a good coal quality.The medium-to-high rank coal rocks have the total organic carbon(TOC)content ranging from 33.49%to 86.11%,averaging75.16%.They have a high degree of thermal evolution(Roof 1.2%-2.8%),and a high gas-generating capacity.They also have high stable carbon isotopic values(δ13C1of-37.6‰to-16‰;δ13C2of-21.7‰to-14.3‰).Deep coal rocks develop matrix pores such as gas bubble pores,organic pores,and inorganic mineral pores,which,together with cleats and fractures,form good reservoir spaces.The coal rock reservoirs exhibit the porosity of 0.54%-10.67%(averaging 5.42%)and the permeability of(0.001-14.600)×10^(-3)μm^(2)(averaging 2.32×10^(-3)μm^(2)).Vertically,there are five types of coal rock gas accumulation and dissipation combinations,among which the coal rock-mudstone gas accumulation combination and the coal rock-limestone gas accumulation combination are the most important,with good sealing conditions and high peak values of total hydrocarbon in gas logging.A model of coal rock gas accumulation has been constructed,which includes widespread distribution of medium-to-high rank coal rocks continually generating gas,matrix pores and cleats/fractures in coal rocks acting as large-scale reservoir spaces,tight cap rocks providing sealing,source-reservoir integration,and five types of efficient enrichment patterns(lateral pinchout complex,lenses,low-amplitude structures,nose-like structures,and lithologically self-sealing).According to the geological characteristics of coal rock gas,the Benxi Formation is divided into 8 plays,and the estimated coal rock gas resources with a buried depth of more than 2000 m are more than 12.33×10^(12)m^(3).The above understandings guide the deployment of risk exploration.Two wells drilled accordingly obtained an industrial gas flow,driving the further deployment of exploratory and appraisal wells.Substantial breakthroughs have been achieved,with the possible reserves over a trillion cubic meters and the proved reserves over a hundred billion cubic meters,which is of great significance for the reserves increase and efficient development of natural gas in China.

Three dimensional discrete element modelling of the conventional compression behavior of gas hydrate bearing coal

To analyze the relationship between macro and meso parameters of the gas hydrate bearing coal(GHBC)and to calibrate the meso-parameters,the numerical tests were conducted to simulate the laboratory triaxial compression tests by PFC3D,with the parallel bond model employed as the particle contact constitutive model.First,twenty simulation tests were conducted to quantify the relationship between the macro–meso parameters.Then,nine orthogonal simulation tests were performed using four meso-mechanical parameters in a three-level to evaluate the sensitivity of the meso-mechanical parameters.Furthermore,the calibration method of the meso-parameters were then proposed.Finally,the contact force chain,the contact force and the contact number were examined to investigate the saturation effect on the meso-mechanical behavior of GHBC.The results show that:(1)The elastic modulus linearly increases with the bonding stiffness ratio and the friction coefficient while exponentially increasing with the normal bonding strength and the bonding radius coefficient.The failure strength increases exponentially with the increase of the friction coefficient,the normal bonding strength and the bonding radius coefficient,and remains constant with the increase of bond stiffness ratio;(2)The friction coefficient and the bond radius coefficient are most sensitive to the elastic modulus and the failure strength;(3)The number of the force chains,the contact force,and the bond strength between particles will increase with the increase of the hydrate saturation,which leads to the larger failure strength.

Unconventional Natural Gas Accumulations in Stacked Deposits:A Discussion of Upper Paleozoic Coal-Bearing Strata in the East Margin of the Ordos Basin, China

The Upper Paleozoic(Carboniferous to Permian) succession in the east margin of the Ordos Basin in the North China Craton has a potential to contain significant hydrocarbon resources, though attention have been mainly attracted for its successful development of coalbed methane(CBM). To improve the previous resource estimates and evaluate the hydrocarbon play possibilities, this study incorporated new discoveries of hydrocarbon units and their stratigraphic relation with source rocks, hydrocarbon migration and trapping configurations. Continuous hydrocarbon accumulation units were identified within the Upper Paleozoic, including the Taiyuan, Shanxi and Xiashihezi formations with great tight gas potential, and the Taiyuan and Shanxi formations also containing shale gas and CBM. Different strata combinations are identified with coal deposition and favour for continuous gas accumulations, including the tidal flat, deltaic and fluvial systems distributed in most of the study areas. Methane was not only generated from the thick coal seams in the Taiyuan and Shanxi formations, but also from shale and dark mudstones. The coal, shale and tight sandstones are proved of remarkable gas content and hydrocarbon indications, and the gas saturation of tight sandstones decreases upward. The stacked deposit combinations vary isochronally in different areas, while the coal seams were developed stably showing good gas sources. Two key stages control the hydrocarbon enrichment, the continuous subsidence from coal forming to Late Triassic and the anomalous paleo-geothermal event happened in Early Cretaceous, as indicated by the fluid inclusions evidence. Extensive areas show good hydrocarbon development potential presently, and more works should be focused on the evaluation and selection of good reservoir combinations.

Definition, theory, methods, and applications of the safe and efficient simultaneous extraction of coal and gas

Simultaneous extraction of the coal and gas is an effective method of eliminating coal mine gas disasters while safely exploiting the coal and achieving efficient gas drainage in China, which is widely accepted by the main coal-producing countries around the world. However, the concrete definition of simultaneous extraction is vague and there is little accurate theoretical support for the simultaneous extraction of coal and gas, which makes it difficult to determine an efficient gas drainage method appropriate to the features of coal seams. Based on theoretical analysis, laboratory tests and field observations, a specific definition of simultaneous extraction of coal and gas is proposed after analyzing the characteristics of coal seam occurrences in China, and we developed the mechanism of mining-enhanced permeability and established the corresponding theoretical model. This comprises a process of fracture network formation, in which the original fractures are opened and new fractures are produced by unloading damage. According to the theoretical model, the engineering approaches and their quantitative parameters of ＇unloading by borehole drilling＇ for single coal seams and ＇unloading by protective seam mining＇ for groups of coal seams are proposed, and the construction principles for coal exploitation and gas-drainage systems for different conditions are given. These methods were applied successfully in the Tunlan Coal Mine in Shanxi Province and the Panyi Coal Mine in Anhui Province and could assure safe and efficient simultaneous extraction of coal and gas in these outburst coal mines.

Regional gas drainage techniques in Chinese coal mines

China's rapid economic development has increased the demand for coal.These results in Chinese coal mines being extended to deeper levels.The eastern Chinese,more economical developed,regions have a long history of coal mining and many coal mines have now started deep mining at a depth from 800 to 1500 m.This increase in mining depth,geostresses,pressures,and gas content of the coal seam complicates geologic construction conditions.Lower permeability and softer coal contribute to increasing numbers of coal and gas outburst,and gas explosion,disasters.A search on effective methods of preventing gas disasters has been provided funds from the Chinese government since 1998.The National Engineering Research Center of Coal Gas Control and the Huainan and Huaibei Mining Group have conducted theoretical and experimental research on a regional gas extraction technology.The results included two important findings.First,grouped coal seams allow adoption of a method where a first,key protective layer is mined to protect upper and lower coal seams by increasing permeability from 400 to 3000 times.Desorption of gas and gas extraction in the protected coal seam of up to 60%,or more,may be achieved in this way.Second,a single seam may be protected by using a dense network of extraction boreholes consisting of cross and along-bed holes.Combined with this is increased use of water that increases extraction of coal seam gas by up to 50%.Engineering practice showed that regional gas drainage technology eliminates regional coal and gas outburst and also enables mining under low gas conditions.These research results have been adopted into the national safety codes of production technology.This paper systematically introduces the principles of the technology,the engineering methods and techniques,and the parameters of regional gas drainage.Engineering applications are discussed.

Theory and practice of integrated coal production and gas extraction

The integrated extraction of coal and gas combines coal mining with gas capture. Taking into account the gas deposition and flow conditions in the Chinese coal basins, this paper describes the status of the theory and key technologies of this integrated extraction system, and presents its application and practice in the Shaqu, Zhongxing, Fenghuangshan and Pingmei mines. Areas for further improvements in future studies are discussed, focusing in particular on the fundamentals of the extraction system to make it greener, more scientific, and more advanced in both the exploitation and utilization of coal and the gas in coal.

Development and application of an efficient gas extraction model for low-rank high-gas coal beds

To promote gas extraction in low-rank high-gas coal beds, the pore structure characteristics of the coal and their effect on gas desorption were studied. The results show that micropores are relatively rare in low-rank coal; mesopores are usually semi-open and inkpot-shaped whereas macropores are usually slit-shaped. Gas desorption is relatively easy at high- pressure stages, whereas it is difficult at low-pressure stages because of the ＇bottleneck effect＇ of the semi-open inkpot-shaped mesopores. A ＇two-three-two＇ gas extraction model was established following experimental analysis and engineering practice applied in the Binchang mining area. In this model, gas extraction is divided into three periods： a planning period, a transitional period and a production period. In each period, surface extraction and underground extraction are performed simultaneously, and pressure-relief extraction and conventional extraction are coupled to each other. After applying this model, the gas extraction rate rose to 78.8 %.

A mathematical model of gas flow during coal outburst initiation

A proposed concept of outburst initiation examines the release of a large amount of gas from coal seams resulted from disintegrating thermodynamically unstable coal organic matter(COM).A coal microstructure is assumed to getting unstable due to shear component appearance triggered by mining operations and tectonic activities considered as the primary factor while COM disintegration under the impact of weak electric fields can be defined as a secondary one.The energy of elastic deformations stored in the coal microstructure activates chemical reactions to tilt the energy balance in a“coal–gas”system.Based on this concept a mathematical model of a gas flow in the coal where porosity and permeability are changed due to chemical reactions has been developed.Using this model we calculated gas pressure changes in the pores initiated by gas release near the working face till satisfying force and energy criteria of outburst.The simulation results demonstrated forming overpressure zone in the area of intensive gas release with enhanced porosity and permeability.The calculated outburst parameters are well combined with those evaluated by field measurements.

Characteristics and applications of gas desorption with excavation disturbances in coal mining

According to the deficiency of experiment system for gas adsorption and desorption in coal mass, a large scale experiment system is developed independently by researchers. This experiment system is composed of primary and auxiliary boxes, power transmission system, mining system, loading system, gas charging system, data monitoring and intelligent acquisition system. The maximum experiment coal consumption is 1200 kg, the mining system is developed to conduct experiment for gas desorption under excavating disturbance, and the plane-charging cribriform ventilation device is developed to realize uniform ventilation for experiment coal sample, which is accord with the actual gas source situation of coal bed. The desorption characteristics of gas in coal are experimentally studied under the conditions of nature and mining using the experiment system. The results show that, compare with nature condition, the permeability of coal and the velocity of gas desorption could significantly increase under the influence of coal pressure relief and destruction caused by mining, and the degree of gas desorption could somewhat increase too. Finally, pressure relief gas extraction of current seam and adjacent seams after mining in a certain coal mine of Yangquan mining area are introduced, and the gas desorption experiment results is verified by analyzing the effect of gas extraction.

Experiment of gas diffusion and its diffusion mechanism in coal

In coal,the gas mainly exists in a free or an adsorption state.When the coal containing gas is damaged,gas desorption and diffusion will occur which can result in gas disaster.This research on gas desorption and diffusion provides a theoretical basis for gas disaster mechanism and prevention.The influence of pressure and temperature on gas diffusion is studied by the experiment.And the mechanism of pressure and temperature on gas diffusion is also analysed.The research results indicate that gas diffusion capacity increases with increasing temperature under the same pressure for the same coal sample.This is mainly because the temperature increases,gas molecular hot motion is severer,kinetic energy of gas molecular increases,and gas desorption quickens,therefore gas diffusion capacity changes stronger.Under other unchanged conditions,the greater gas adsorption balance pressure,the more gas adsorption content,and the higher the initial gas concentration.When gas diffusion begins,the greater the gas concentration gradient,the faster the gas diffusion speeds.

Effects of coal damage on permeability and gas drainage performance

Coal permeability is a measure of the ability for fluids to flow through coal structures. It is one of the most important parameters affecting the gas drainage performance in underground coal mines. Despite the extensive research conducted on coal permeability, few studies have considered the effect of coal damage on permeability. This has resulted in unreliable permeability evaluation and prediction. The aim of this study is to investigate the effect of coal damage on permeability and gas drainage performance. The Cui-Bustin permeability model was improved by taking into account the impact of coal damage on permeability. The key damage coefficient of the improved permeability model is determined based on the published permeability data. A finite-element numerical simulation was then developed based on the improved permeability model to investigate the damage areas and the permeability distribution around roadway. Results showed that the tensile failure occurs mainly on the upper and lower sides of the roadway while the shear failure symmetrically occurs on the left and right sides. With the increase in the friction angle value, the damage area becomes small. A good agreement was obtained between the results of the improved permeability model(c = 3) and the published permeability data. This indicated a more accurate permeability prediction by the improved permeability model. It is expected that the findings of this study could provide guidance for in-seam gas drainage borehole design and sealing, in order to enhance the gas drainage performance and reduce gas emissions into underground roadways.

Technical evaluation system of co-extraction of coal and gas

Coal and gas are two important resources in China,and it is an effective way to recycle them with the method of co-extraction of coal and gas.In view of actual situation of China's co-extraction of coal and gas,this research adopts the science evaluation of gas extraction of coal by the method of quantitative evaluation,and preliminarily establishes the technical evaluation system of co-extraction of coal and gas.Technical evaluation system of co-extraction of coal and gas includes safety evaluation,economic evaluation and resource recovery evaluation in the process of mining coal and gas.In addition,this paper results in the selected evaluation parameters and target functions that are used in the three evaluation methods.The establishment of evaluation system for co-extraction of coal and gas plays an important theoretical significance and guiding role in co-extraction of coal and gas for China's coal enterprises.

Organic Geochemical and Petrographic Characteristics of the Coal Measure Source Rocks of Pinghu Formation in the Xihu Sag of the East China Sea Shelf Basin: Implications for Coal Measure Gas Potential

Coal measure source rocks, located in the Xihu Sag of the East China Sea Shelf Basin, were analyzed to define the hydrocarbon generation potential, organic geochemistry/petrology characteristics, and coal preservation conditions. The Pinghu source rocks in the Xihu Sag are mainly gas-prone accompany with condensate oil generation. The coals and shales of the Pinghu Formation are classified from "fair" to "excellent" source rocks with total organic carbon(TOC) contents ranging from 25.2% to 77.2% and 1.29% to 20.9%, respectively. The coals are richer in TOC and S1+S2 than the shales, indicating that the coals have more generation potential per unit mass. Moreover, the kerogen type of the organic matter consists of types Ⅱ-Ⅲ and Ⅲ, which the maturity Ro ranges from 0.59% to 0.83%. Petrographically, the coals and shales are dominated by vitrinite macerals(69.1%–96.8%) with minor proportions of liptinite(2.5%–17.55%) and inertinite(0.2%–6.2%). The correlation between maceral composition and S1+S2 indicates that the main contributor to the generation potential is vitrinite. Therefore, the coals and shales of the Pinghu Formation has good hydrocarbon generation potential, which provided a good foundation for coal measure gas accumulation. Furthermore, coal facies models indicates that the Pinghu coal was deposited in limno-telmatic environment under high water levels, with low tree density(mainly herbaceous) and with low-moderate nutrient supply. Fluctuating water levels and intermittent flooding during the deposition of peat resulted in the inter-layering of coal, shale and sandstone, which potentially providing favorable preservation conditions for coal measure gas.

Comparing potentials for gas outburst in a Chinese anthracite and an Australian bituminous coal mine

Gas outbursts in underground mining occur under conditions of high gas desorption rate and gas content,combined with high stress regime, low coal strength and high Young's modulus. This combination of gas and stress factors occurs more often in deep mining. Hence, as the depth of mining increases, the potential for outburst increases. This study proposes a conceptual model to evaluate outburst potential in terms of an outburst indicator. The model was used to evaluate the potential for gas outburst in two mines, by comparing numerical simulations of gas flow behavior under typical stress regimes in an Australian gassy mine extracting a medium-volatile bituminous coal, and a Chinese gassy coal mine in Qinshui Basin(Shanxi province) extracting anthracite coal. We coupled the stress simulation program(FLAC3D) with the gas simulation program(SIMED II) to compute the stress and gas pressure and gas content distribution following development of a roadway into the targeted coal seams. The data from gas content and stress distribution were then used to quantify the intensity of energy release in the event of an outburst.

Similarity criteria and coal-like material in coal and gas outburst physical simulation

Coal and gas outburst is one of the main gas hazards in coal mines. However, due to the risks of the coal and gas outburst, the field test is difficult to complete. Therefore, an effective approach to studying the mechanism and development of outburst is to conduct the similar physical simulation. However, the similarity criteria and similar materials in outburst are the key factors which restrict the development of physical simulation. To solve those problems, this paper has established similarity criteria base on mechanics model, solid-fluid coupling model and energy model, and presented high similar materials. Combining with three groups of similar number, and considering similar mechanical parameters and deformation and failure regularity, the similarity criteria of outburst is determined on the basis of the energy model. According to those criteria, we put forward a similar material consists of pulverized coal, cement, sand, activated carbon, and water. The similar material has high compressive strength and the accordant characteristics with the raw coal, include density, porosity, adsorption, desorption. The new research is promising for preventing and controlling gas hazards in the future.

Preventing Coal and Gas Outburst Using Methane Hydration

According to the characteristics of the methane hydrate condensing and accumulating methane, authors put forward a new technique thought way to prevent the accident of coal and gas outburst by urging the methane in the coal seams to form hydrate. The paper analyzes the feasibility of forming the methane hydrate in the coal seam from the several sides, such as, temperature,pressure, and gas components, and the primary trial results indicate the problems should be settled before the industrialization appliance realized.

Mechanism investigation on coal and gas outburst: An overview

Coal and gas outburst is a frequent dynamic disaster during underground coal mining activities.After about 150 years of exploration,the mechanisms of outbursts remain unclear to date.Studies on outburst mechanisms worldwide focused on the physicochemical and mechanical properties of outburst-prone coal,laboratory-scale outburst experiments and numerical modeling,mine-site investigations,and doctrines of outburst mechanisms.Outburst mechanisms are divided into two categories:single-factor and multi-factor mechanisms.The multi-factor mechanism is widely accepted,but all statistical phenomena during a single outburst cannot be explained using present knowledge.Additional topics about outburst mechanisms are proposed by summarizing the phenomena that need precise explanation.The most appealing research is the microscopic process of the interaction between coal and gas.Modern physical-chemical methods can help characterize the natural properties of outburst-prone coal.Outburst experiments can compensate for the deficiency of first-hand observation at the scene.Restoring the original outburst scene by constructing a geomechanical model or numerical model and reproducing the entire outburst process based on mining environment conditions,including stratigraphic distribution,gas occurrence,and geological structure,are important.Future studies can explore outburst mechanisms at the microscale.

Assessment of gas and dust explosion in coal mines by means of fuzzy fault tree analysis

During the past decade, coal dust and gas explosions have been the most two serious types of disasters in China, threatening the lives of miners and causing significant losses in terms of national property. In this paper, an evaluation model of coal dust and gas explosions was constructed based on a fuzzy fault tree by taking the Xingli Coal Mine as a research site to identify the risk factors of coal dust and gas explosions.Furthermore, the hazards associated with such explosions were evaluated for this particular coal mine.After completing an on-site investigation, the fuzzy probabilities of basic events were obtained through expert scoring, and these expert opinions were then aggregated as trapezoidal fuzzy numbers to calculate the degrees of importance of all basic events. Finally, these degrees of importance were sorted. According to the resulting order, the basic events with higher probabilities were determined to identify key hazards in the daily safety management of this particular coal mine. Moreover, effective measures for preventing gas and coal dust explosions were derived. The fuzzy fault tree analysis method is of high significance in the analysis of accidental coal mine explosions and provides theoretical guidance for improving the efficiency of coal mine safety management in a scientific and feasible manner.

Coal and gas outburst dynamic system

Coal and gas outburst is an extremely complex dynamic disaster in coal mine production process which will damage casualties and equipment facilities, and disorder the ventilation system by suddenly ejecting a great amount of coal and gas into roadway or working face. This paper analyzed the interaction among the three essential elements of coal and gas outburst dynamic system. A stress-seepage-damage coupling model was established which can be used to simulate the evolution of the dynamical system, and then the size scale of coal and gas outburst dynamical system was investigated. Results show that the dynam- ical system is consisted of three essential elements, coal-gas medium （material basis）, geology dynamic environment （internal motivation） and mining disturbance （external motivation）. On the case of CI 3 coal seam in Panyi Mine, the dynamical system exists in the range of 8-12 m in front of advancing face. The size scale will be larger where there are large geologic structures. This research plays an important guid- ing role for developing measures of coal and gas outburst prediction and prevention.

Discussion on determination of gas content of coal and uncertainties of measurement

Gas content of coal is mostly determined using a direct method, particularly in coal mining where mine safety is of paramount importance. Direct method consists of measuring directly the volume of gas desorbed from coal in several steps, from solid then crushed coal. In mixed gas conditions the composition of the desorbed gas is also measured to account for contribution of various coal seam gas in the mix. The determination of gas content using the direct method is associated with errors of measurement of volume of gas but also the errors associated with measurement of composition of the desorbed gas. These errors lead to uncertainties in reporting the gas content and composition of in-situ seam gas. This paper discusses the current direct method practised in Australia and potential errors and uncertainty associated with this method. Generic methods of estimate of uncertainties are also developed and are to be included in reporting gas content of coal. A method of direct measurement of remaining gas in coal following the completion of standard gas content testing is also presented. The new method would allow the determination of volume of almost all gas in coal and therefore the value of total gas content. This method is being considered to be integrated into a new standard for gas content testing.