Fabrication of pollution-free coal gangue-based catalytic material utilizing ferrous chloride as activator for efficient peroxymonosulfate activation

Novel coal gangue-based persulfate catalyst(CG-FeCl_(2))was successfully synthesized by the means of calcinating under nitrogen atmosphere with the addition of ferrous chloride tetrahydrate(FeCl_(2)·_(4)H_(2)O).The phase transformation of the prepared materials and gas products during the heating process are thoroughly investigated.It is suggested that ferrous chloride participated in the phase transformation and formed Si-O-Fe bonds.And the main gaseous products are H_(2)O,H_(2),and HCl during the heating process.Besides,the ability of CG-FeCl_(2) to activate peroxymonosulfate(PMS)for catalytic degradation of polycyclic aromatic hydrocarbons(PAHs)and phenol was deeply studied.More than 95%of naphthyl,phenanthrene and phenol were removed under optimizied conditions.In addition,1O_(2),·OH,and SO_(4)·−were involved in the CG-FeCl_(2)/PMS system from the free radical scavenging experiment,where 1O_(2) played a major role during the oxidation process.Furthermore,CG-FeCl_(2)/PMS system exhibited superior stability in a relatively wide pH range and the presence of common anion from related degradation experiments.Overall,the novel CG-FeCl_(2) is an efficient and environmentally friendly catalyst,displaying potential application prospect in the field of PAHs and phenol-contaminated wastewater treatment.

Source apportionment of heavy metals in soils around a coal gangue heap with the APCS-MLR and PMF receptor models in Chongqing,southwest China

This study studied the characteristics and source apportionment of heavy metal pollution in the agricultural soil surrounding a gangue coal heap in Chongqing,China by using absolute principal component scores-multiple linear regression(APCSMLR)model and positive matrix factorization(PMF)model.The applicability of the models was compared in the assessment of source apportionment.The results showed that the average contents of Cd,Hg,As,Pb,Cr,Cu,Ni,and Zn in the surface soil were 0.46,0.14,9.66,31.2,127,95.6,76.0,and 158 mg/kg,respectively.Combined with the spatial distribution and correlation analyses,the results of source apportionment were consistent for both the APCSMLR and PMF models.Cd,Hg,As,and Pb were mainly affected by the gangue heap accumulation,with respective contributions of 74.6%,79.4%,69.1%,and 67.2%based on the APCS-MLR model and respective contributions of 69.7%,60.7%,57.4%,and 41.9%based on the PMF model.Ni and Zn were mainly affected by industrial and agricultural activities,while Cr and Cu were mainly affected by natural factors.The results of the source apportionment were approximately consistent between the APCS-MLR and PMF models.The combined application of the two receptor models can make the results of source apportionment more comprehensive,accurate,and reliable.

Properties and Hydration Mechanism of Cementitious Materials Prepared from Calcined Coal Gangue

The preparation of cementitious materials by replacing part of the cement with activated coal gangue is of great significance to the cement industry in terms of carbon reduction and coal-based solid waste utilization.For this paper,cementitious material was prepared by firing activated coal gangue under suspension conditions and batching it with limestone powder using Inner Mongolia coal gangue as raw material.The optimal ratio was determined by testing the strength changes of the cementitious material at 3,7,and 28 days of hydration,and the hydration process and mechanism were explored by combining the pore structure,heat of hydration,chemical composition,phase composition,and microscopic morphological characteristics of the hydration products.The results showed that the active materials formulated from activated gangue and limestone powder can be used to prepare cementitious materials with good performance at the level of 30%–50%replacement of cement.The optimal ratio was 30%replacement of cement,and the mass ratio of calcined gangue to limestone powder was 2:1.The 3 days compressive strength of this ratio was 28.8 MPa,which was only slightly lower than that of cement.However,the 28 days compressive strength of samples reached 67.5 MPa,which was much higher than that of the reference cement.In the hydration of this cementitious material,not only does the activated coal gangue react with the Ca(OH)_(2)formed by hydration to form C–S–H gel,but CaCO3 also participates in the reaction to form a new phase of carbon aluminate,and the two effects together promote the development of the later strength of the samples.This paper can provide a reference for carbon reduction in the cement production process and comprehensive utilization of coal gangue.

Transformation of Coal Gangue to Sodalite and Faujasite Using Alkali-hydrothermal Method

The coal gangue as the only source of silicon and aluminum was employed to synthesize sodalite and faujasite using hydrothermal method,which directly treated the mixture of pre-treated coal gangue and NaOH solution under hydrothermal environment.X-ray powder diffraction analysis(XRD),thermogravimetry analysis(TG)and differential thermogravimetry analysis(DTG),scanning electron microscopy(SEM),high resolution transmission electron microscopy(HRTEM),N_(2)adsorption-desorption technique,X-ray photoelectron spectroscopy(XPS),etc.were used to characterize the samples.Cd^(2+) ion was used to evaluate the heavy metal ions removal performance of the samples.The experimental results show that the coal gangue,which consists of quartz,calcium feldspar,potassium feldspar and kaolinite,can transform to sodalite and faujasite under alkali-hydrothermal condition at 150 and 180℃,respectively.The as-prepared sodalite and faujasite can effectively remove the simulated Cd2+ion wastewater and actual industrial wastewater containing As^(3+),Cd^(2+),and Cr^(3+)ions,and the good heavy metal ion removal performance of the zeolites is mainly attributed to their low Si/Al ratio and high Na+content.This alkali-hydrothermal method appears to be a simple and efficient method for transformation of coal gangue to high purity zeolites.

Multi-criteria comparative analysis of the pressure drop on coal gangue fly-ash slurry at different parts along an L-shaped pipeline

Disposing of coal gangue and fly-ash on the surface is a risky method with tremendous potential catastrophic consequences for the environment.Backfill mining is a promising practice for turning those hazardous wastes into functional backfill materi-als.Unfortunately,how to efficiently deliver the slurry to the desired places remains under-researched.To address this issue,the computational fluid dynamics software Fluent was used in the current study in addition to a laboratory rheological test to simulate the impact of various parameters on the evolution of pressure at a particular section of the pipeline.Furthermore,the response surface method was employed to investigate how the various components and their corresponding influencing weights interact to affect the pressure drop.This study demonstrates that the pressure drop of the slurry is highly influenced by slurry concentration,speed,and pipe diameter.While conveying speed is the main component in the bend section,pipe diameter takes over in the horizontal and vertical pipe sections.

Experimental Study on Ratio and Performance of Coal Gangue/Bottom Ash Geopolymer Double-Liquid Grouting Material

Mine grouting reinforcement and water plugging projects often require large amounts of grouting materials.To reduce the carbon emission of grouting material production,improve the utilization of solid waste from mining enterprises,and meet the needs of mine reinforcement and seepage control,a double-liquid grouting material containing a high admixture of coal gangue powder/bottom ash geopolymer was studied.The setting time,fluidity,bleeding rate,and mechanical properties of grouting materials were studied through laboratory tests,and SEM analyzed the microstructure of the materials.The results show that the total mixture of calcined gangue does not exceed 60%.And the proportion of bottom ash replacing cement should be within 30%.At the same time,the volume mixture of sodium silicate is 20%.And the water-solid ratio does not exceed 0.6.The stability of the slurry prepared under this ratio is good.The microstructure of the stone body is dense,and its strength can meet the requirements of rock reinforcement and seepage control.Its economic and environmental benefits are more significant than the traditional cement-silicate double-liquid grouting material.

Preparation of Lightweight Alumina-silica Castables by Replacing Closed-cell Perlite Aggregates with Coal Gangue Ceramsites

Lightweight alumina-silica castables were prepared using closed-cell perlite(2-4 mm),open-cell perlite(4-6 mm)and coal gangue ceramsites(2-5 mm)as aggregates,floating beads(0.3-0.5 mm),sinking beads(0.6-0.8 mm),silica micropowder,α-Al_(2)O_(3) micropowder,zirconia and zircon micropowder as fines,and Secar 71 cement(calcium aluminate cement)as the binder.The effects of the coal gangue ceramsites addition(0,6%,12%,18%and 24%,by mass)on the properties of the as-prepared lightweight alumina-silica castables were investigated.The results show that:(1)the addition of coal gangue ceramsites can reduce the sintering shrinkage of the specimens and help to improve the strength and thermal shock resistance;(2)the samples with the addition of coal gangue ceramsites can produce pores in the matrix of the sintered samples,which provides enough space for the growth of CA6 complex solid solution and expands the irregular lamellar structure;(3)with the addition of coal gangue ceramsites increasing,the linear shrinkage of the samples heat treated at 1000 or 1200℃firstly reduces and then increases,the bulk density increases and the apparent porosity decreases;the cold compression strength and the thermal shock resistance of the specimens heat treated at 1200℃firstly increase and then decrease.Thus,the optimal addition of coal gangue ceramsites is 18%.

Character of the Si and Al Phases in Coal Gangue and Its Ash

Analysis of the Si and AI phases in coal gangue fuel and its ash is important for use of coal gangue ashes. A comprehensive study by theoretical and experimental analyses with differential thermal analysis, X-ray diffraction and Infrared Spectroscopy has been made in the present article to explore the diagram of the Si and Al phases in coal gangue fuel and its ashes. It is found that kaolinite and quartz are the main phases in coal gangue fuel. The ratio of moles A1203 to SiO2 （i.e., Al2O3 （mole） / SiO2 （mole）） is usually no more than 0.5 in most coal gangue fuel and its ashes. The kaolinit at about 984℃ releases a large quantity of SiO2, which makes calcine coal gangue more active than coal gangue itself. The relationship between the ratio A1203 （mole）]SiO2（mole）and the components of coal gangue ash is analyzed, resulting in a formula to calculate the quantity of each phase. Applying the formula to the testing samples from an electric plant in north China supports the above conclusions.

Utilization of Coal Gangue and Copper Tailings as Clay for Cement Clinker Calcinations

In order to avoid environmental pollution from Coal gangue （CG） and copper tailings （CT）, the utilization as cement clinker calcinations was experimentally investigated. Low-calcium limestone was also selected as another raw material. The clinker component and microstructure were analyzed by XRD and SEM. The experimental results showed that qualified cement clinker could be generated by substituting CG and CT compound for clay. While mixed with high-calcium limestone and low-calcium limestone, the calcinations temperature were 50 ℃ or 100 ℃ lower than that of clay. CT and CG contain oxygen-rich minerals and potential of geological rock energy. The energy of CG performs functions and drops down sintering temperature. The calcination time was shortened and the clinker sintering coal consumption reduced while substituting CG and CT for clay, and also served the reutilization of low-calcium limestone, CG and CT.

Effect of Coal Gangue with Different Kaolin Contents on Compressive Strength and Pore Size of Blended Cement Paste

The effects of activated coal gangue on compressive strength, porosity and pore size distribution of hardened cement pastes were investigated. Activated coal gangue with two different kaolin contents, one higher and one lower, were used to partially replace Portland cement at 0%, 10%, and 30% by weight. The water to binder ratio（w/b） of 0.5 was used for all the blended cement paste mixes. Experimental results indicate that the blended cement of activated coal gangue mortar with higher kaolin mineral content has a higher compressive strength than that with lower kaolin mineral content. The porosity and pore size of blended cement mortar were significantly affected by the replacement of activated coal gangue.

Pozzolanic Activity of Burned Coal Gangue and Its Effects on Structure of Cement Mortar

The pozzolanic activity of coal gangue burned at different burning temperatures was investigated. The burned coal gangue was mixed with portland cement in different proportions （ 20% - 60% ）. The pozzolanic activity of coal gangue burned and the hydration products were examined, the compressive strengths of the pastes of the mixtures were tested, and the mechanism of the reaction was discussed. The experimental results slum, that the coal gangue burned at 750 ℃ has the optimum pozzolanic activity, and the burned coal ganguc with SiO2 and Al2 O3 is in an active form. When the coal gangue burned at 750℃ is mixed into portland cement, the content of calcium hydroxide in paste is significantly reduced, while the contents of hydrated calcium silk.ate and hydrated calcium aluminate are increased accordingly, hence resulting in the improvement of the microstructure of mortar. The compressive strength of cement paste decreases with increasing the content of burncd coal gangue. The decease in strength is small in the range of 20% - 30% coal gangue substitution and significant in 30%- 60% substitution.

Characteristics of leaching of heavy metals from low-sulfur coal gangue under different conditions

Coal gangue is the main pollution source of mining areas.When coal gangue is stacked and recycled,the heavy metal elements contained in it are released by natural weathering and leaching,which causes damage to the surrounding ecological environment.In this study,the leaching and precipitation characteristics of heavy metals in low-sulfur coal gangue under different environmental conditions were simulated by indoor dynamic leaching experiments,which provided a theoretical basis for environmental restoration of the mining area.The conclusions are as follows:higher heavy metal content in low-sulfur coal gangue is associated with greater,leaching of heavy metals;acidic conditions promote the release of heavy metals in low-sulfur coal gangue;and more precipitation is associated with better release of heavy metals from the low-sulfur coal gangue.

Impact of coal gangue on the level of main trace elements in the shallow groundwater of a mine reclamation area

Coal gangue is the most used filling material during reclamation of areas suffering subsidence from min- ing. Main trace element levels (F, As, Hg, and Pb) in shallow groundwater in the reclamation area may be affected by leaching from the gangue. This can has an impact on the application of the water for agricul- tural irrigation or use as drinking water. Therefore, it is of great significance to understand the effect coal gangue has on the shallow groundwater of a reclaimed area. We studied the effect of coal gangue on fluo- rine, arsenic, mercury, and lead levels in the shallow groundwater of a reclamation area by testing the water and the coal gangue. One well near the reclamation area was used as a control well and element levels in water from this well and from the soil next to the well were also measured. The results show that the levels of these elements are increasing in the reclamation area over time. The increase in fluorine, arsenic, mercury, and lead in monitor wells varies from 7.42% to 8.26%, from 7.13% to 7.90%, from 4.85% to 6.48%, and from 4.69% to 6.42%, respectively. Fluorine and arsenic levels are lower in monitor wells than in the control water. The other elements are found in greater concentration than in the control. The Nemerow index also indicates that the shallow groundwater in the reclamation area I is moderately affected by the back-filling coal gangue, while the shallow groundwater in the reclamation area II and III are slightly affected by the back-filling coal gangue. This shallow groundwater could be used for agri- cultural irrigation or for drinking.

Structure and Pozzolanic Activity of Calcined Coal Gangue during the Process of Mechanical Activation

On the basis of analyzing coal gangue＇s chemical and mineral compositions, the structure change of coal gangue during the mechanical activation was investigated by XRD, FTIR, NMR, and the mechanical strength of the cement doped coal gangue with various specific surface area was tested. The experimental results indicate that, the lattice structure of metakaolin in coal gangue samples calcined at 700 ℃ disorganizes gradually and becomes disordered, and the lattice structure of α-quartz is distorted slightly. The pozzolanic activity of the coal gangue increases obviously with its structural disorganization.

Research on Potential Fertilization of Coal Gangue in the Weibei Coalfield,China

Based on the systematic analysis of the coal gangue in Weibei Coalfield, such as petrologic characteristics, chemical composition, nutrient elements, deleterious elements, and the transformation, and compared with the soil element content background values of Loess Plateau and national harmful materials controlling standards, we conclude that the coal gangue in the Weibei Coalfield has huge potential to be used as clay fertilizer.

Effects of Surface-activated Coal Gangue Aggregates on Properties of Cement-based Materials

Effects of calcined coal gangue （CG） aggregates treated by the surface thermal activation on the flowability and strength, and paste-CG aggregate interfaces of the cement-based material were investigated. The experimental results show that the compressive and flexural strength of the cement-based material with the calcined CG aggregates is much higher than that of the material with the natural CG aggregates, but the flowability of the material with calcined CG is significantly reduced with the calcined time. The strength of the material with the calcined CG aggregates only increases little with the calcined time at the same w/c ratio, but is reduced with the calcined time at the same flowability. The CG aggregates calcined by the surface thermal activation obviously overcomes the disadvantages of fully calcined CG.

Synthesis of β-Sialon from Coal Gangue

It is worth to study the synthesis of β-Sialon from coal gangue, because coal gangue is a waste of coal production andis a high quality kaolin contained carbon which is a perfect raw material of contained reducer itself for synthesis of β-Sialon. The study showed that a high conversion rate of 95% from coal gangue to β-Sialon could be obtained by usingprocess of carbothermal reduction nitridation when strictly controlled the thermodynamic conditions of synthesis. Forcontrolling the synthesis conditions easy, the details of the effects of pco, po2 and T on the conversion rate of β-Sialon were discussed detailedly and the phase diagrams of oxygen pressure vs composition for Si3N4-AlN-Al2O3-SiO2system at 1350, 1500, and 1600℃ were constructed in the paper.

Synthesis and Thermal Insulation Performance of Silica Aerogel from Recycled Coal Gangue by Means of Ambient Pressure Drying

Silica aerogel materials are well recognized for their superinsulation performance and are regarded as one of the hot candidates to revolutionize building insulation. To date, high production cost related to exorbitant precursors as well as cumbrous multi-step hydrophobization process has often narrowed the field of applications. In this work, granular silica aerogel materials were synthesized by extracting Si O2 from recycled rich silicon coal gangue, followed by one-step hydrophobization and ambient pressure drying. Lightweight(about 0.16 g/cm3) and nanostructural aerogels were obtained through this route. They exhibit a 3D open porous microstructure with around 600 cm2/g surface area and 20 nm of the average pore diameter, thermal conductivity of 4-5 mm packed granules is 20-25 m W/(m·K), which was proved by both guarded hot plate and hot-wire transient methods. This study offers a new facile route for the synthesis of silica aerogel from recycled solid waste coal gangue and suggests a method, which may lead to a cost reduction in terms of industrial production.

Modification of ash flow properties of coal rich in calcium and iron by coal gangue addition

Flow property of coal ash and slag is an important parameter for slag tapping of entrained flow gasifier.The viscosity of slag with high contents of calcium and iron exhibits the behavior of a crystalline slag,of which viscosity sharply increases when temperature is lowered than temperature of critical viscosity(TCV).The fluctuation in temperature near the TCVcan cause an accumulation of slag inside the gasifier.In order to prevent slag blockage,it is necessary to adjust the ash composition by additive to modify the flow property of coal rich in calcium and iron.Main components of coal gangue are Al_(2)O_(3) and SiO_(2),which is a potential additive to modify the ash flow properties of these coals.In this work,we investigated the ash flow properties of a typical coal rich in calcium and iron by adding coal gangue with different SiO_(2)/Al_(2)O_(3)ratio.The results showed that the ash fusion temperatures(AFTs)firstly decreased,and then increased with increasing amount of coal gangue addition.Chemical composition of coal ash rich in calcium and iron moved from gehlenite primary phase to anorthite,quartz and corundum primary phases.The slags with coal gangue addition behaved as a glassy slag,of which the viscosity gradually increased as temperature decreased.Besides,a high SiO_(2)/Al_(2)O_(3)ratio of coal gangue was beneficial to modify the slag viscosity behavior.Addition of coal gangue with a high SiO_(2)/Al_(2)O_(3)ratio impeded formation of crystalline phases during cooling.This work demonstrated that coal gangue addition was an effective way to improve the ash flow properties of the coal rich in calcium and iron for the entrained flow gasifier.

The Mechanical Properties and Hydration Characteristics of Cement Pastes Containing Added-calcium Coal Gangue

The mechanical properties of several kinds of coal gangue calcined with limestone were Researched so as to find the optimum way of calcinations with limestone. Microstructure and property of hydration process of cement pastes containing added-calcium coal gangue were analyzed by means of scanning electron microscope （SEM） and method of mercury in trusion poremeasurement （MIP）, etc. The experiment can approve those results： when proper amounst of gypsum and fluorite were taken as mineralizers in the course of calcinations of added-calcium coal gangue, activity of coal gangue can be effectively improved. The results of mechanical property and structural characteristic such as hydration process, hydration product and microstructure etc. of cement pastes containing added-calcium coal gangue are consistent.