The effect of the vertical pipe length on the performance of a coal pipe splitter with a perpendicularly arranged upstream elbow was investigated experimentally employing a fiber optic measuring system. The upstream e...The effect of the vertical pipe length on the performance of a coal pipe splitter with a perpendicularly arranged upstream elbow was investigated experimentally employing a fiber optic measuring system. The upstream elbow and coal pipe splitter were installed in two perpendicular planes. Contours of dis- tributions of the particle concentration and size were obtained in different transverse sections. The experimental data show that the maximum/minimum concentration ratio in transverse sections A, B, and C decreased rapidly as the length of the vertical pipe increased. The left/right-leg average concentration ratio remained about 1, and a balanced split was thus achieved. With a perpendicularly arranged upstream elbow, the vertical pipe length had little effect on the splitter performance, which is beneficial for engineering design and convenient for industrial application.展开更多
According to the requirements of Queensland Gas Company Ltd. （QGC）, the operator of the Queensland Curtis LNG （QCLNG） pipeline project in Australia, girth welding experiments and weldability evaluations have been ...According to the requirements of Queensland Gas Company Ltd. （QGC）, the operator of the Queensland Curtis LNG （QCLNG） pipeline project in Australia, girth welding experiments and weldability evaluations have been carded out for three X70 UOE pipes from Baosteel based on API 1104 standards. Shielded metal arc welding （SMAW） and gas- shielded flux-cored wire arc welding （FCAW-G） have been applied, and the girth weld joint quality and mechanical performance were evaluated. It was found that the field girth weldability of Baosteel＇ s XT0 UOE pipes was excellent under the conditions used here and satisfied the requirements of the QCLNG project for field girth welding construction. Furthermore,Baosteel has offered a solution to the QCLNG project for pipeline girth welding in which the girth welding joint design, selection of welding processes and consumables, welding procedures, techniques and joint inspections are included. Such research provides important guidance for the difficult tie-in welding applications for the construction of the QCLNG pipelines in the field.展开更多
Wellbore instability is a key problem restricting efficient production of coal-bed methane. In order to perform thorough and systematic research regarding coal-bed wellbore stability problems, a new discrete element m...Wellbore instability is a key problem restricting efficient production of coal-bed methane. In order to perform thorough and systematic research regarding coal-bed wellbore stability problems, a new discrete element model which fully considers the features of cleat coal-beds is established based on the Kirsch equation. With this model, the safe pipe tripping speed, drilling fluid density window and coal- bed collapse/fracture pressure are determined; in addition, the relationships between pipe tripping speed and pipe size, cleat size, etc. and wellbore stability are analyzed in the coal-bed drilling and pipe tripping processes. The case studies show the following results： the wellbore collapses （collapse pressure： 4.33 MPa） or fractures （fracture pressure： 12.7 MPa） in certain directions as a result of swab or surge pressure when the pipe tripping speed is higher than a certain value; the cleat face size has a great influence on wellbore stability, and if the drilling fluid pressure is too low, the wellbore is prone to collapse when the ratio of the face cleat size to butt cleat size is reduced; however, if the drilling fluid pressure is high enough, the butt cleat size has no influence on the wellbore fracture; the factors influencing coal-bed stability include the movement length, pipe size, borehole size.展开更多
This article shows an innovative method to model and validate the hot air flow through the blast furnacés tuyeres. This study will be the basis for flow measurements implementation and safety interlocks for the p...This article shows an innovative method to model and validate the hot air flow through the blast furnacés tuyeres. This study will be the basis for flow measurements implementation and safety interlocks for the pulverized coal injection. The flow measurements were taken in the blast furnace down leg pipes by installing refractory Venturi tubes. The system for the calculation of differential pressure takes into consideration the dimension of the Venturi, the air density and compressibility. The objective is to specify the flow transmitters required to automate a control system and implement safety interlocks for the coal injection plant.展开更多
基金This work was supported by National Natural Science Foundation of China （51476137） and the National Basic Research Program of China （2015CB251501 ）.
文摘The effect of the vertical pipe length on the performance of a coal pipe splitter with a perpendicularly arranged upstream elbow was investigated experimentally employing a fiber optic measuring system. The upstream elbow and coal pipe splitter were installed in two perpendicular planes. Contours of dis- tributions of the particle concentration and size were obtained in different transverse sections. The experimental data show that the maximum/minimum concentration ratio in transverse sections A, B, and C decreased rapidly as the length of the vertical pipe increased. The left/right-leg average concentration ratio remained about 1, and a balanced split was thus achieved. With a perpendicularly arranged upstream elbow, the vertical pipe length had little effect on the splitter performance, which is beneficial for engineering design and convenient for industrial application.
文摘According to the requirements of Queensland Gas Company Ltd. （QGC）, the operator of the Queensland Curtis LNG （QCLNG） pipeline project in Australia, girth welding experiments and weldability evaluations have been carded out for three X70 UOE pipes from Baosteel based on API 1104 standards. Shielded metal arc welding （SMAW） and gas- shielded flux-cored wire arc welding （FCAW-G） have been applied, and the girth weld joint quality and mechanical performance were evaluated. It was found that the field girth weldability of Baosteel＇ s XT0 UOE pipes was excellent under the conditions used here and satisfied the requirements of the QCLNG project for field girth welding construction. Furthermore,Baosteel has offered a solution to the QCLNG project for pipeline girth welding in which the girth welding joint design, selection of welding processes and consumables, welding procedures, techniques and joint inspections are included. Such research provides important guidance for the difficult tie-in welding applications for the construction of the QCLNG pipelines in the field.
文摘Wellbore instability is a key problem restricting efficient production of coal-bed methane. In order to perform thorough and systematic research regarding coal-bed wellbore stability problems, a new discrete element model which fully considers the features of cleat coal-beds is established based on the Kirsch equation. With this model, the safe pipe tripping speed, drilling fluid density window and coal- bed collapse/fracture pressure are determined; in addition, the relationships between pipe tripping speed and pipe size, cleat size, etc. and wellbore stability are analyzed in the coal-bed drilling and pipe tripping processes. The case studies show the following results： the wellbore collapses （collapse pressure： 4.33 MPa） or fractures （fracture pressure： 12.7 MPa） in certain directions as a result of swab or surge pressure when the pipe tripping speed is higher than a certain value; the cleat face size has a great influence on wellbore stability, and if the drilling fluid pressure is too low, the wellbore is prone to collapse when the ratio of the face cleat size to butt cleat size is reduced; however, if the drilling fluid pressure is high enough, the butt cleat size has no influence on the wellbore fracture; the factors influencing coal-bed stability include the movement length, pipe size, borehole size.
文摘This article shows an innovative method to model and validate the hot air flow through the blast furnacés tuyeres. This study will be the basis for flow measurements implementation and safety interlocks for the pulverized coal injection. The flow measurements were taken in the blast furnace down leg pipes by installing refractory Venturi tubes. The system for the calculation of differential pressure takes into consideration the dimension of the Venturi, the air density and compressibility. The objective is to specify the flow transmitters required to automate a control system and implement safety interlocks for the coal injection plant.
